component
RY6050-ADJM5R
Public Made by Adomby adom
RYCHIP Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Input voltage pin for the regulator. Recommended operating range 2V to 6.5V (absolute max 8V). Bypass to GND with a 1\u00b5F to 10\u00b5F ceramic capacitor placed close to the pin."+ "description": "Input voltage pin for the regulator. Recommended operating range 2V to 6.5V (absolute max 8V). Bypass to GND with a 1µF to 10µF ceramic capacitor placed close to the pin." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Active-high enable control. Driving EN above 0.9V (typ. VENH ~1V) turns on the regulator; driving EN below 0.4V (VENL 0.5V max) puts the device into shutdown mode (Ishut < 0.1\u00b5A). No internal pull-down - do not leave floating; tie to VIN or GND through a defined logic source."+ "description": "Active-high enable control. Driving EN above 0.9V (typ. VENH ~1V) turns on the regulator; driving EN below 0.4V (VENL 0.5V max) puts the device into shutdown mode (Ishut < 0.1µA). No internal pull-down - do not leave floating; tie to VIN or GND through a defined logic source." }, { "number": "4", "name": "FB", "type": "input",- "description": "Feedback input for the adjustable output. Connect to the midpoint of an external R1/R2 divider from VOUT to GND to set VOUT = VFB \u00d7 (1 + R1/R2), where VFB = 0.8V typical (784-816mV). An optional feed-forward capacitor CFF across R1 improves transient response."+ "description": "Feedback input for the adjustable output. Connect to the midpoint of an external R1/R2 divider from VOUT to GND to set VOUT = VFB × (1 + R1/R2), where VFB = 0.8V typical (784-816mV). An optional feed-forward capacitor CFF across R1 improves transient response." }, { "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated output voltage pin. Supplies up to 500mA continuous. Bypass to GND with a 10\u00b5F ceramic output capacitor placed as close as possible to this pin and GND to guarantee phase compensation and stability."+ "description": "Regulated output voltage pin. Supplies up to 500mA continuous. Bypass to GND with a 10µF ceramic output capacitor placed as close as possible to this pin and GND to guarantee phase compensation and stability." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/ry6050-adjm5r-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }