← Commit history
ry3710: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+62−1
page.json+62−1@@ -33,5 +33,66 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "RY3710",+ "manufacturer": "RYCHIP",+ "package": "SOT-23-6",+ "pin_count": 6,+ "category": "DC-DC Converters",+ "parts": {+ "symbol": "ry3710.kicad_sym",+ "footprint": "ry3710.kicad_mod",+ "model_3d": "ry3710-etched.glb",+ "model_3d_plain": "ry3710.glb",+ "model_3d_step": "ry3710-etched.step",+ "model_3d_step_plain": "ry3710.step",+ "lbr": "ry3710.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "SW",+ "type": "power_out",+ "description": "Power Switch Output. Drain of the internal 80mΩ NMOS power switch (rated -0.3V to 26V). Connect the boost inductor and Schottky output rectifier here; keep the switch-node copper minimized to reduce EMI."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground pin. Serves as the return for both the internal power MOSFET and analog control circuitry; connect to a solid ground plane close to the input and output capacitor grounds."+ },+ {+ "number": "3",+ "name": "FB",+ "type": "input",+ "description": "Feedback Input. Regulated to VFB = 0.6V (typ, 588-612mV). Connect a resistor divider from VOUT to FB to program the output voltage: VOUT = 0.6V × (R1+R2)/R2. Input bias current is typically -10nA."+ },+ {+ "number": "4",+ "name": "EN",+ "type": "input",+ "description": "Regulator On/Off Control Input. Logic high (threshold ~1V, max 26V) enables the converter; low disables it (shutdown IIN typ 0.1µA). Tie to VIN for automatic startup; do not leave floating."+ },+ {+ "number": "5",+ "name": "IN",+ "type": "power_in",+ "description": "Input Supply Pin. Operating range 2.3V to 12V (absolute max 26V). Must be locally bypassed with a low-ESR ceramic capacitor (22µF recommended) placed as close as possible to the pin."+ },+ {+ "number": "6",+ "name": "NC",+ "type": "unconnected",+ "description": "No Connection. This pin is not internally bonded and should be left floating or tied to ground on the PCB."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}