← Commit history

Set visibility: public

Ray ·ac05dd0885 · ·parent 54309da
1 file changed +9−6
page.json+9−6
@@ -32,31 +32,31 @@         "number": "1",         "name": "EN",         "type": "input",-        "description": "Chip enable. Drive above 1.5V (typ 1.15V rising threshold, 140mV hysteresis) to turn the regulator on; drive below 0.3V to shut it down (<1\u00b5A in shutdown). Must not be left floating. Absolute max 6.0V."+        "description": "Chip enable. Drive above 1.5V (typ 1.15V rising threshold, 140mV hysteresis) to turn the regulator on; drive below 0.3V to shut it down (<1µA in shutdown). Must not be left floating. Absolute max 6.0V."       },       {         "number": "2",         "name": "GND",         "type": "power_in",-        "description": "Device ground return. Should be tied to a large copper pour for thermal dissipation (\u03b8JA 170\u00b0C/W, \u03b8JC 130\u00b0C/W) and to minimize the switching-loop area with the input capacitor."+        "description": "Device ground return. Should be tied to a large copper pour for thermal dissipation (θJA 170°C/W, θJC 130°C/W) and to minimize the switching-loop area with the input capacitor."       },       {         "number": "3",         "name": "SW",         "type": "output",-        "description": "Switch node. Connects to the drains of the internal P-channel and N-channel power MOSFETs (RDS(on) 0.3\u03a9 PMOS, 0.2\u03a9 NMOS) and to the external inductor. Peak SW current rating 3A; absolute max -0.3V to (VIN+0.3V)."+        "description": "Switch node. Connects to the drains of the internal P-channel and N-channel power MOSFETs (RDS(on) 0.3Ω PMOS, 0.2Ω NMOS) and to the external inductor. Peak SW current rating 3A; absolute max -0.3V to (VIN+0.3V)."       },       {         "number": "4",         "name": "IN",         "type": "power_in",-        "description": "Power supply input, 2.5V to 5.5V operating (absolute max 6.0V, UVLO ~2.4V). Must be decoupled to GND with a 10\u00b5F or greater ceramic capacitor placed close to the pin."+        "description": "Power supply input, 2.5V to 5.5V operating (absolute max 6.0V, UVLO ~2.4V). Must be decoupled to GND with a 10µF or greater ceramic capacitor placed close to the pin."       },       {         "number": "5",         "name": "FB",         "type": "input",-        "description": "Feedback input for the error amplifier. External resistor divider from VOUT sets the regulated output via VOUT = VFB \u00d7 (R1+R2)/R2, where VFB = 0.600V (\u00b12%). Absolute max 6.0V."+        "description": "Feedback input for the error amplifier. External resistor divider from VOUT sets the regulated output via VOUT = VFB × (R1+R2)/R2, where VFB = 0.600V (±2%). Absolute max 6.0V."       }     ],     "provenance": {@@ -126,5 +126,8 @@     "docs/ry3415-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file