← Commit history

rts5411t-gr: factory component page (tier=lcsc)

Ray ·7fd8250139 · ·parent 7fccbe4
1 file changed +536−8
page.json+536−8
@@ -1,13 +1,546 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "rts5411t-gr",+  "title": "RTS5411T-GR",+  "brief": "Realtek Semicon USB Converters, QFN-76(9x9). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "Realtek Semicon USB Converters, QFN-76(9x9). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "interface",     "rts5411t-gr"   ],+  "component": {+    "mpn": "RTS5411T-GR",+    "manufacturer": "Realtek Semicon",+    "package": "QFN-76(9x9)",+    "pin_count": 77,+    "category": "Interface",+    "subcategory": "USB Converters",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2403191045_Realtek-Semicon-RTS5411T-GR_C5159024.pdf",+    "parts": {+      "symbol": "rts5411t-gr.kicad_sym",+      "footprint": "rts5411t-gr.kicad_mod",+      "model_3d": "rts5411t-gr.glb",+      "model_3d_step": "rts5411t-gr.step",+      "lbr": "rts5411t-gr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "RREF",+        "type": "passive",+        "description": "Bandgap reference. Connect an external 6.2K ohm (+/-1%) resistor from this pin to reference GND."+      },+      {+        "number": "2",+        "name": "BPWR_DET",+        "type": "input",+        "description": "Upstream VBUS power detection pin. Active High (5V input buffer). 0 = upstream VBUS absent, 1 = upstream VBUS present."+      },+      {+        "number": "3",+        "name": "DV11",+        "type": "power_in",+        "description": "1.1V power supply for digital circuits."+      },+      {+        "number": "4",+        "name": "DV33",+        "type": "power_in",+        "description": "3.3V power supply for digital circuits (2.97-3.63V)."+      },+      {+        "number": "5",+        "name": "DSP2_DP",+        "type": "bidirectional",+        "description": "USB 2.0 D+ signal of Downstream Port 2."+      },+      {+        "number": "6",+        "name": "DSP2_DM",+        "type": "bidirectional",+        "description": "USB 2.0 D- signal of Downstream Port 2."+      },+      {+        "number": "7",+        "name": "AV11",+        "type": "power_in",+        "description": "1.1V power supply for analog circuits."+      },+      {+        "number": "8",+        "name": "DSP2_SSTX+",+        "type": "output",+        "description": "USB 3.2 Gen1x1 SuperSpeed TX+ of Downstream Port 2."+      },+      {+        "number": "9",+        "name": "DSP2_SSTX-",+        "type": "output",+        "description": "USB 3.2 Gen1x1 SuperSpeed TX- of Downstream Port 2."+      },+      {+        "number": "10",+        "name": "OCP2",+        "type": "input",+        "description": "Over-current protection flag for downstream port 2. 5V input buffer with internal 10K pull-up (valid in 'power switch' mode). Active low by default (F/W-configurable). 0 = over-current detected."+      },+      {+        "number": "11",+        "name": "DSP2_SSRX+",+        "type": "input",+        "description": "USB 3.2 Gen1x1 SuperSpeed RX+ of Downstream Port 2."+      },+      {+        "number": "12",+        "name": "DSP2_SSRX-",+        "type": "input",+        "description": "USB 3.2 Gen1x1 SuperSpeed RX- of Downstream Port 2."+      },+      {+        "number": "13",+        "name": "AV11",+        "type": "power_in",+        "description": "1.1V power supply for analog circuits."+      },+      {+        "number": "14",+        "name": "DSP3_SSTX+",+        "type": "output",+        "description": "USB 3.2 Gen1x1 SuperSpeed TX+ of Downstream Port 3."+      },+      {+        "number": "15",+        "name": "DSP3_SSTX-",+        "type": "output",+        "description": "USB 3.2 Gen1x1 SuperSpeed TX- of Downstream Port 3."+      },+      {+        "number": "16",+        "name": "OCP3",+        "type": "input",+        "description": "Over-current protection flag for downstream port 3. 5V input buffer with internal 10K pull-up (valid in 'power switch' mode). Active low by default. 0 = over-current detected."+      },+      {+        "number": "17",+        "name": "DSP3_SSRX+",+        "type": "input",+        "description": "USB 3.2 Gen1x1 SuperSpeed RX+ of Downstream Port 3."+      },+      {+        "number": "18",+        "name": "DSP3_SSRX-",+        "type": "input",+        "description": "USB 3.2 Gen1x1 SuperSpeed RX- of Downstream Port 3."+      },+      {+        "number": "19",+        "name": "AV11",+        "type": "power_in",+        "description": "1.1V power supply for analog circuits."+      },+      {+        "number": "20",+        "name": "DSP3_DP",+        "type": "bidirectional",+        "description": "USB 2.0 D+ signal of Downstream Port 3."+      },+      {+        "number": "21",+        "name": "DSP3_DM",+        "type": "bidirectional",+        "description": "USB 2.0 D- signal of Downstream Port 3."+      },+      {+        "number": "22",+        "name": "DV33",+        "type": "power_in",+        "description": "3.3V power supply for digital circuits."+      },+      {+        "number": "23",+        "name": "DSP4_DP",+        "type": "bidirectional",+        "description": "USB 2.0 D+ signal of Downstream Port 4."+      },+      {+        "number": "24",+        "name": "DSP4_DM",+        "type": "bidirectional",+        "description": "USB 2.0 D- signal of Downstream Port 4."+      },+      {+        "number": "25",+        "name": "AV11",+        "type": "power_in",+        "description": "1.1V power supply for analog circuits."+      },+      {+        "number": "26",+        "name": "DSP4_SSTX+",+        "type": "output",+        "description": "USB 3.2 Gen1x1 SuperSpeed TX+ of Downstream Port 4."+      },+      {+        "number": "27",+        "name": "DSP4_SSTX-",+        "type": "output",+        "description": "USB 3.2 Gen1x1 SuperSpeed TX- of Downstream Port 4."+      },+      {+        "number": "28",+        "name": "OCP4",+        "type": "input",+        "description": "Over-current protection flag for downstream port 4. 5V input buffer with internal 10K pull-up. Active low by default. 0 = over-current detected."+      },+      {+        "number": "29",+        "name": "DSP4_SSRX+",+        "type": "input",+        "description": "USB 3.2 Gen1x1 SuperSpeed RX+ of Downstream Port 4."+      },+      {+        "number": "30",+        "name": "DSP4_SSRX-",+        "type": "input",+        "description": "USB 3.2 Gen1x1 SuperSpeed RX- of Downstream Port 4."+      },+      {+        "number": "31",+        "name": "AV11",+        "type": "power_in",+        "description": "1.1V power supply for analog circuits."+      },+      {+        "number": "32",+        "name": "GPIO0/SMBCL",+        "type": "bidirectional",+        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port transmit/receive activity. Configurable as the SMBus clock (SMBCL) pin."+      },+      {+        "number": "33",+        "name": "GPIO1/SMBDA",+        "type": "bidirectional",+        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port over-current condition. Configurable as the SMBus data (SMBDA) pin."+      },+      {+        "number": "34",+        "name": "GPIO2/SCL",+        "type": "bidirectional",+        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port transmit/receive activity. Configurable as the I2C clock (SCL) pin."+      },+      {+        "number": "35",+        "name": "GPIO3/SDA",+        "type": "bidirectional",+        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port over-current condition. Configurable as the I2C data (SDA) pin."+      },+      {+        "number": "36",+        "name": "GPIO4",+        "type": "bidirectional",+        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port transmit/receive activity. Leave floating if unused."+      },+      {+        "number": "37",+        "name": "GPIO5",+        "type": "bidirectional",+        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port over-current condition."+      },+      {+        "number": "38",+        "name": "GPIO6",+        "type": "bidirectional",+        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port transmit/receive activity."+      },+      {+        "number": "39",+        "name": "GPIO7",+        "type": "bidirectional",+        "description": "General purpose I/O with weak internal 200K pull-up, 3.3V buffer. Default: LED for downstream port over-current condition."+      },+      {+        "number": "40",+        "name": "DSP1_PWR",+        "type": "output",+        "description": "External VBUS power switch enable for downstream port 1. Open-drain output, active low by default (F/W can configure active high; then uses 3.3V push-pull). 0 = VBUS on, 1 = VBUS off. Leave floating if unused."+      },+      {+        "number": "41",+        "name": "DSP2_PWR",+        "type": "output",+        "description": "External VBUS power switch enable for downstream port 2. Open-drain, active low by default. 0 = VBUS on, 1 = VBUS off."+      },+      {+        "number": "42",+        "name": "DSP3_PWR",+        "type": "output",+        "description": "External VBUS power switch enable for downstream port 3. Open-drain, active low by default. 0 = VBUS on, 1 = VBUS off."+      },+      {+        "number": "43",+        "name": "DSP4_PWR",+        "type": "output",+        "description": "External VBUS power switch enable for downstream port 4. Open-drain, active low by default. 0 = VBUS on, 1 = VBUS off."+      },+      {+        "number": "44",+        "name": "SCK",+        "type": "output",+        "description": "SPI clock output to external Serial Flash memory. 3.3V bi-directional buffer."+      },+      {+        "number": "45",+        "name": "SCS",+        "type": "output",+        "description": "SPI chip-select output to external Serial Flash memory. 3.3V bi-directional buffer. Also sampled at power-on reset as a strap: 0 = execute code from internal ROM, 1 = execute code from external Serial Flash."+      },+      {+        "number": "46",+        "name": "MISO",+        "type": "input",+        "description": "SPI data input from external Serial Flash memory. 3.3V bi-directional buffer."+      },+      {+        "number": "47",+        "name": "MOSI",+        "type": "output",+        "description": "SPI data output to external Serial Flash memory. 3.3V bi-directional buffer."+      },+      {+        "number": "48",+        "name": "DV33",+        "type": "power_in",+        "description": "3.3V power supply for digital circuits."+      },+      {+        "number": "49",+        "name": "DV11",+        "type": "power_in",+        "description": "1.1V power supply for digital circuits."+      },+      {+        "number": "50",+        "name": "DV11",+        "type": "power_in",+        "description": "1.1V power supply for digital circuits."+      },+      {+        "number": "51",+        "name": "SWR_GND",+        "type": "power_in",+        "description": "Reference ground for the internal 1.1V switching regulator."+      },+      {+        "number": "52",+        "name": "SWR_OUT",+        "type": "power_out",+        "description": "5V-to-1.1V internal switching regulator output. Leave floating if internal switching regulator is not used."+      },+      {+        "number": "53",+        "name": "SWR_V5_IN",+        "type": "power_in",+        "description": "5V-to-1.1V switching regulator input (3.1-5.5V). Connect to LDO_V5_IN when internal switching regulator is not used."+      },+      {+        "number": "54",+        "name": "LDO_V5_IN",+        "type": "power_in",+        "description": "5V-to-3.3V internal LDO input (4.5-5.5V). Short to DV33 when on-chip LDO is not used."+      },+      {+        "number": "55",+        "name": "V33_OUT",+        "type": "power_out",+        "description": "3.3V output from the internal 5V-to-3.3V LDO. Short to DV33 when on-chip LDO is not used."+      },+      {+        "number": "56",+        "name": "USP_DP",+        "type": "bidirectional",+        "description": "USB 2.0 D+ signal of the Upstream Port."+      },+      {+        "number": "57",+        "name": "USP_DM",+        "type": "bidirectional",+        "description": "USB 2.0 D- signal of the Upstream Port."+      },+      {+        "number": "58",+        "name": "AV11",+        "type": "power_in",+        "description": "1.1V power supply for analog circuits."+      },+      {+        "number": "59",+        "name": "USP_SSTX-",+        "type": "output",+        "description": "USB 3.2 Gen1x1 SuperSpeed TX- of the Upstream Port."+      },+      {+        "number": "60",+        "name": "USP_SSTX+",+        "type": "output",+        "description": "USB 3.2 Gen1x1 SuperSpeed TX+ of the Upstream Port."+      },+      {+        "number": "61",+        "name": "GND",+        "type": "power_in",+        "description": "Reference ground."+      },+      {+        "number": "62",+        "name": "USP_SSRX-",+        "type": "input",+        "description": "USB 3.2 Gen1x1 SuperSpeed RX- of the Upstream Port."+      },+      {+        "number": "63",+        "name": "USP_SSRX+",+        "type": "input",+        "description": "USB 3.2 Gen1x1 SuperSpeed RX+ of the Upstream Port."+      },+      {+        "number": "64",+        "name": "AV11",+        "type": "power_in",+        "description": "1.1V power supply for analog circuits."+      },+      {+        "number": "65",+        "name": "DSP1_SSTX+",+        "type": "output",+        "description": "USB 3.2 Gen1x1 SuperSpeed TX+ of Downstream Port 1."+      },+      {+        "number": "66",+        "name": "DSP1_SSTX-",+        "type": "output",+        "description": "USB 3.2 Gen1x1 SuperSpeed TX- of Downstream Port 1."+      },+      {+        "number": "67",+        "name": "OCP1",+        "type": "input",+        "description": "Over-current protection flag for downstream port 1. 5V input buffer with internal 10K pull-up. Active low by default. 0 = over-current detected."+      },+      {+        "number": "68",+        "name": "DSP1_SSRX+",+        "type": "input",+        "description": "USB 3.2 Gen1x1 SuperSpeed RX+ of Downstream Port 1."+      },+      {+        "number": "69",+        "name": "DSP1_SSRX-",+        "type": "input",+        "description": "USB 3.2 Gen1x1 SuperSpeed RX- of Downstream Port 1."+      },+      {+        "number": "70",+        "name": "AV11",+        "type": "power_in",+        "description": "1.1V power supply for analog circuits."+      },+      {+        "number": "71",+        "name": "DSP1_DP",+        "type": "bidirectional",+        "description": "USB 2.0 D+ signal of Downstream Port 1."+      },+      {+        "number": "72",+        "name": "DSP1_DM",+        "type": "bidirectional",+        "description": "USB 2.0 D- signal of Downstream Port 1."+      },+      {+        "number": "73",+        "name": "DV33",+        "type": "power_in",+        "description": "3.3V power supply for digital circuits."+      },+      {+        "number": "74",+        "name": "XTLI",+        "type": "input",+        "description": "12 MHz crystal oscillator input. 3.3V clock interface."+      },+      {+        "number": "75",+        "name": "XTLO",+        "type": "output",+        "description": "12 MHz crystal oscillator output/drive. 3.3V clock interface."+      },+      {+        "number": "76",+        "name": "SPWR_DET",+        "type": "input",+        "description": "Self-power detection pin. 5V input buffer, active high. 0 = bus-power setting, 1 = self-power setting."+      },+      {+        "number": "EP",+        "name": "E-PAD",+        "type": "power_in",+        "description": "Exposed thermal pad on the bottom of the package. Must be connected to reference ground for thermal dissipation and electrical grounding."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2403191045_Realtek-Semicon-RTS5411T-GR_C5159024.pdf",+        "pages": 32,+        "sha256": "371452f35b4a4904",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 77,+        "described": 77,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "Realtek Semicon",+      "Package": "QFN-76(9x9)",+      "Category": "Interface",+      "Pins": "77"+    }+  },+  "variants": [+    {+      "mpn": "RTS5411T-GR",+      "kind": "packaging"+    }+  ],+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "rts5411t-gr"+  ],+  "discovery_pitch": "RTS5411T-GR (Realtek Semicon) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +558,5 @@     "docs/rts5411t-gr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file