← Commit history
page.json+11−8@@ -38,7 +38,7 @@ "number": "2", "name": "P3MDIAP", "type": "bidirectional",- "description": "Port 3 MDI pair A positive. Differential Ethernet PHY line, 100\u03a9 internal termination; used for TX/RX in 1000Base-T and TX in 100/10Base-T (with Auto-MDIX)."+ "description": "Port 3 MDI pair A positive. Differential Ethernet PHY line, 100Ω internal termination; used for TX/RX in 1000Base-T and TX in 100/10Base-T (with Auto-MDIX)." }, { "number": "3",@@ -50,7 +50,7 @@ "number": "4", "name": "P3MDIBP", "type": "bidirectional",- "description": "Port 3 MDI pair B positive. Differential Ethernet PHY line, 100\u03a9 internal termination."+ "description": "Port 3 MDI pair B positive. Differential Ethernet PHY line, 100Ω internal termination." }, { "number": "5",@@ -104,7 +104,7 @@ "number": "13", "name": "MDIREF", "type": "passive",- "description": "MDI bias reference. A 2.49k\u03a9 (1%) resistor must be connected between MDIREF and GND."+ "description": "MDI bias reference. A 2.49kΩ (1%) resistor must be connected between MDIREF and GND." }, { "number": "14",@@ -140,7 +140,7 @@ "number": "19", "name": "GPIO57/INTERRUPT", "type": "bidirectional",- "description": "GPIO57 or interrupt output. Active high when pulled down to GND via 1k\u03a9; active low when pulled up to DVDDIO via 4.7k\u03a9. Internal pull-down."+ "description": "GPIO57 or interrupt output. Active high when pulled down to GND via 1kΩ; active low when pulled up to DVDDIO via 4.7kΩ. Internal pull-down." }, { "number": "20",@@ -386,7 +386,7 @@ "number": "60", "name": "EN_SWR", "type": "input",- "description": "Enable internal switching regulator strap. Pull up to enable, pull down to disable. Must be pulled via external 1k\u03a9 resistor."+ "description": "Enable internal switching regulator strap. Pull up to enable, pull down to disable. Must be pulled via external 1kΩ resistor." }, { "number": "61",@@ -524,13 +524,13 @@ "number": "83", "name": "XTALO", "type": "output",- "description": "25MHz crystal clock output. Series-connect a 150\u03a9 resistor between XTALO and crystal; add loading cap crystal-to-GND. Leave floating when driving from an external oscillator."+ "description": "25MHz crystal clock output. Series-connect a 150Ω resistor between XTALO and crystal; add loading cap crystal-to-GND. Leave floating when driving from an external oscillator." }, { "number": "84", "name": "XTALI", "type": "input",- "description": "25MHz crystal clock input / oscillator input, \u00b150ppm. Maximum input voltage 3.3V."+ "description": "25MHz crystal clock input / oscillator input, ±50ppm. Maximum input voltage 3.3V." }, { "number": "85",@@ -864,5 +864,8 @@ "docs/rtl8367s-cg-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }