← Commit history
README.mdadded+80@@ -0,0 +1,80 @@+# RTL8153B-VB-CG++**Realtek Semicon** · Ethernet Controllers · QFN-40-EP(5x5)++RTL8153B-VB-CG from Realtek Semicon, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MDIP0 | bidirectional | Ethernet MDI pair 0 positive. In MDI mode, BI_DA+ (first pair) in 1000Base-T; TX+ in 10/100Base-T. Route as controlled-Z differential to magnetics. |+| 2 | MDIN0 | bidirectional | Ethernet MDI pair 0 negative. BI_DA- in 1000Base-T; TX- in 10/100Base-T. In MDI-X crossover mode acts as BI_DB- (RX-). |+| 3 | AVDD10 | power_in | Analog 1.0V power supply (PHY analog rail). Decouple locally; supplied from internal or external 1.0V regulator. |+| 4 | MDIP1 | bidirectional | Ethernet MDI pair 1 positive. In MDI mode, BI_DB+ (second pair, RX+ in 10/100Base-T). In MDI-X acts as BI_DA+ (TX+). |+| 5 | MDIN1 | bidirectional | Ethernet MDI pair 1 negative. BI_DB- in MDI (RX- in 10/100Base-T); BI_DA- in MDI-X. |+| 6 | MDIP2 | bidirectional | Ethernet MDI pair 2 positive. BI_DC+ (third pair in 1000Base-T). Unused in 10/100Base-T. |+| 7 | MDIN2 | bidirectional | Ethernet MDI pair 2 negative. BI_DC- (BI_DD- in MDI-X crossover). |+| 8 | AVDD10 | power_in | Analog 1.0V power supply (PHY analog rail). Second AVDD10 pin - decouple locally. |+| 9 | MDIP3 | bidirectional | Ethernet MDI pair 3 positive. BI_DD+ (fourth pair in 1000Base-T). |+| 10 | MDIN3 | bidirectional | Ethernet MDI pair 3 negative. BI_DD- (BI_DC- in MDI-X crossover). |+| 11 | AVDD33 | power_in | Analog 3.3V power supply. Bulk + local decoupling; internal LDO on AVDD33 rail feeds analog blocks. |+| 12 | U3SSTXN | output | USB 3.0 SuperSpeed transmit differential pair, negative. AC-couple with 75-200nF caps to the USB connector; route as 90Ω differential. |+| 13 | U3SSTXP | output | USB 3.0 SuperSpeed transmit differential pair, positive. AC-coupled; 90Ω differential. |+| 14 | U3VDD10 | power_in | USB 3.0 (SuperSpeed) 1.0V power supply. Decouple locally to GND. |+| 15 | U3SSRXN | input | USB 3.0 SuperSpeed receive differential pair, negative. 90Ω differential from connector; host end AC-couples. |+| 16 | U3SSRXP | input | USB 3.0 SuperSpeed receive differential pair, positive. 90Ω differential. |+| 17 | U2DM | bidirectional | USB 2.0/1.1 D- data line. 90Ω differential with U2DP; series ESD/EMI protection recommended at the connector. |+| 18 | U2DP | bidirectional | USB 2.0/1.1 D+ data line. 90Ω differential with U2DM. |+| 19 | U2VDD10 | power_in | USB 2.0/1.1 1.0V power supply. Decouple locally. |+| 20 | AVDD33 | power_in | Analog 3.3V power supply / internal LDO 3.3V output node. Datasheet: 'embedded LDO is for RTL8153B-VB internal use only; do not power other devices.' |+| 21 | VDD5 | power_in | Analog 5.0V power supply. Sourced from USB VBUS (typ 5V). |+| 22 | DVDD10_UPS | power_out | Digital 1.0V uninterruptible power supply / LDO 1.0V output. Feeds always-on digital domain for wake logic. Do not use to power other devices. |+| 23 | DVDD33 | power_in | Digital 3.3V power supply. Bulk + local decoupling. |+| 24 | EEDO/LED2/SPISDO/LANWAKEB/GPIO | bidirectional | Shared multi-function pin: EEPROM data-in (EEDO, from EEPROM SDO), LED2 output, SPI flash SDO input, LANWAKEB power-management event (open-drain, active low), or general-purpose I/O. Mode chosen by autoload (eFUSE). |+| 25 | EEDI/SPISDI/ENSWREG | bidirectional | Shared pin: EEPROM data-out to EEPROM SDI (EEDI), SPI flash serial-data-input driver (SPISDI), and power-on latch ENSWREG (3.3V=enable switching regulator, 0V=LDO or external 1.0V). Latch sampled at power-on. |+| 26 | VDDREG33 | power_in | Digital 3.3V supply for the internal switching/LDO regulator. |+| 27 | VDDREG5 | power_in | Digital 5V supply for the internal switching/LDO regulator (from USB VBUS). |+| 28 | REGOUT | power_out | Switching/LDO regulator 1.0V output. Feeds internal 1.0V rails via external inductor/cap network. Internal-use only per datasheet. |+| 29 | GND | power_in | Switching/LDO regulator ground return. |+| 30 | EESK/LED1/SPISCK | output | Shared pin: EEPROM serial clock (93C46/56/66), LED1 output (default), or SPI flash serial clock. Mode chosen by autoload. |+| 31 | EECS | output | EEPROM chip select (93C46/56/66). Active only when EEPROM mode is selected by autoload. |+| 32 | LED0/SPICSB | output | Shared pin: LED0 output (default) or SPI flash chip select (active low). Mode chosen by autoload. |+| 33 | DVDD33 | power_in | Digital 3.3V power supply. Second DVDD33 pin - decouple locally. |+| 34 | DVDD10 | power_in | Digital 1.0V power supply (core). Fed from REGOUT or external 1.0V source. |+| 35 | CKXTAL1 | input | Clock reference input. Connect to 25MHz crystal (Y1) with load caps; connect to GND if an external clock source drives CKXTAL2 instead. |+| 36 | CKXTAL2 | bidirectional | Clock reference output when using a crystal, or external clock input (25MHz/48MHz oscillator). |+| 37 | AVDD10 | power_in | Analog 1.0V power supply. Third AVDD10 pin - decouple locally. |+| 38 | RSET | input | External bias resistor reference. Connect a precision resistor to GND to set the internal current bias for the PHY. |+| 39 | AVDD33 | power_in | Analog 3.3V power supply. Decouple locally. |+| 40 | AVDD33 | power_in | Analog 3.3V power supply. Decouple locally. |+| 41 | GND | power_in | Ground - exposed thermal pad on QFN underside. Must be soldered to a solid GND copper pour with thermal vias for both electrical return and heat sinking. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Realtek Semicon |+| Package | QFN-40-EP(5x5) |+| Category | Interface |+| Pins | 41 |++## Ordering variants++- `RTL8153B-VB-CG`++## CAD (KiCad official)++- Symbol: `RTL8153B-VB-CG`+- Footprint: `Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm`+- 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Realtek Semicon datasheet](docs/rtl8153b-vb-cg-datasheet.pdf) (34 pp, sha256 `c598af5b177c86c1`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/rtl8153b-vb-cg-datasheet.pdf)
page.jsonadded+34@@ -0,0 +1,34 @@+{+ "slug": "rtl8153b-vb-cg",+ "version": "0.1.0",+ "type": "component",+ "description": "Realtek Semicon Ethernet Controllers, QFN-40-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "interface",+ "rtl8153b-vb-cg"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "rtl8153b-vb-cg.kicad_sym",+ "rtl8153b-vb-cg.kicad_mod",+ "rtl8153b-vb-cg.glb",+ "rtl8153b-vb-cg.step",+ "rtl8153b-vb-cg.lbr",+ "docs/hero.png",+ "docs/rtl8153b-vb-cg-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html"+ ],+ "visibility": "public",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}