← Commit history

Initial commit: component/rtl8111h-cg

Ray ·3db4944d98 ·
2 files changed +107
README.mdadded+73
@@ -0,0 +1,73 @@+# RTL8111H-CG++**Realtek Semicon** · Ethernet Controllers · QFN-32-EP(4x4)++RTL8111H-CG from Realtek Semicon, in a QFN-32-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MDIP0 | bidirectional | MDI pair 0 positive. In MDI mode, first pair for 1000BASE-T (BI_DA+); transmit pair for 10/100BASE-T(X). In MDI crossover mode acts as BI_DB+ (receive pair for 10/100BASE-T(X)). |+| 2 | MDIN0 | bidirectional | MDI pair 0 negative. Complement of MDIP0 (BI_DA-/BI_DB-). |+| 3 | AVDD10 | power_in | Analog 1.0V power supply. |+| 4 | MDIP1 | bidirectional | MDI pair 1 positive. In MDI mode, second pair for 1000BASE-T (BI_DB+); receive pair for 10/100BASE-T(X). In MDI crossover mode acts as BI_DA+ (transmit pair for 10/100BASE-T(X)). |+| 5 | MDIN1 | bidirectional | MDI pair 1 negative. Complement of MDIP1 (BI_DB-/BI_DA-). |+| 6 | MDIP2 | bidirectional | MDI pair 2 positive. In MDI mode, third 1000BASE-T pair (BI_DC+). In MDI crossover mode acts as BI_DD+. |+| 7 | MDIN2 | bidirectional | MDI pair 2 negative. Complement of MDIP2 (BI_DC-/BI_DD-). |+| 8 | AVDD10 | power_in | Analog 1.0V power supply. |+| 9 | MDIP3 | bidirectional | MDI pair 3 positive. In MDI mode, fourth 1000BASE-T pair (BI_DD+). In MDI crossover mode acts as BI_DC+. |+| 10 | MDIN3 | bidirectional | MDI pair 3 negative. Complement of MDIP3 (BI_DD-/BI_DC-). |+| 11 | AVDD33 | power_in | Analog 3.3V power supply. |+| 12 | CLKREQB | bidirectional | PCI Express Reference Clock Request (open drain, active low, 1.8V/3.3V compatible I/O; requires external pull-up). Used to request start of the PCIe reference clock and to initiate L1 exit under the L1.off mechanism. |+| 13 | HSIP | input | PCI Express Receive Differential Pair, positive (2.5GT/s, x1). |+| 14 | HSIN | input | PCI Express Receive Differential Pair, negative (2.5GT/s, x1). |+| 15 | REFCLK_P | input | PCI Express Differential Reference Clock, positive (100MHz ± 300ppm). |+| 16 | REFCLK_N | input | PCI Express Differential Reference Clock, negative (100MHz ± 300ppm). |+| 17 | HSOP | output | PCI Express Transmit Differential Pair, positive (2.5GT/s, x1). |+| 18 | HSON | output | PCI Express Transmit Differential Pair, negative (2.5GT/s, x1). |+| 19 | PERSTB | input | PCI Express Reset (active low, 1.8V/3.3V compatible input). When asserted at power-on, the device returns to a predefined reset state and is ready for initialization after de-assertion. |+| 20 | ISOLATEB | input | Isolate pin (active low, 1.8V/3.3V compatible input). Used to isolate the device from the PCI Express bus; while asserted, PCIe outputs (except LANWAKEB) are not driven and PCIe inputs are not sampled. Follows system state S0 high, S3/S4 low. |+| 21 | LANWAKEB | bidirectional | Power Management Event (open drain, active low, 1.8V/3.3V compatible I/O; requires external pull-up). Used to reactivate the PCI Express slot's main power rails and reference clocks. |+| 22 | DVDD10 | power_in | Digital 1.0V power supply (core). |+| 23 | VDDREG | power_in | Digital 3.3V power supply for the internal Switching/LDO regulator. |+| 24 | REGOUT | power_out | Regulator 1.0V output. On RTL8111H this is the LDO regulator output; on RTL8111HS it is the switching regulator output. |+| 25 | LED2 | output | Customizable LED output 2. Function selected via IO register offset 18h~19h (default per Fixed LED Mode). Logic high during power down. |+| 26 | LED1/GPO | bidirectional | Dual-function: LED1 output (default) or General Purpose Input/Output (1.8V/3.3V compatible input, 3.3V output only). Only one function may be selected at a time via register. |+| 27 | LED0 | output | Customizable LED output 0. Function selected via IO register offset 18h~19h. Logic high during power down. |+| 28 | CKXTAL1 | input | Crystal/clock input, 25MHz or 48MHz reference. Connect to one terminal of the crystal or drive with an external clock source. |+| 29 | CKXTAL2 | bidirectional | Crystal/clock output (and input when using an external clock source). 25MHz or 48MHz reference. |+| 30 | AVDD10 | power_in | Analog 1.0V power supply. |+| 31 | RSET | passive | Bias reference; connect an external precision resistor to ground to set internal bias current. |+| 32 | AVDD33 | power_in | Analog 3.3V power supply. |+| 33 | GND | power_in | Ground (exposed pad on package bottom). Must be soldered to the board ground plane for electrical return and thermal dissipation. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Realtek Semicon |+| Package | QFN-32-EP(4x4) |+| Category | Interface |+| Pins | 33 |++## Ordering variants++- `RTL8111H-CG`+- `RTL8111H-CGRTL8111HS-CG`++## CAD (KiCad official)++- Symbol: `RTL8111H-CG`+- Footprint: `Package_DFN_QFN:QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm`+- 3D model: QFN-32-EP(4x4) (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Realtek Semicon datasheet](docs/rtl8111h-cg-datasheet.pdf) (40 pp, sha256 `283e5b9ee377fdd8`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/rtl8111h-cg-datasheet.pdf)
page.jsonadded+34
@@ -0,0 +1,34 @@+{+  "slug": "rtl8111h-cg",+  "version": "0.1.0",+  "type": "component",+  "description": "Realtek Semicon Ethernet Controllers, QFN-32-EP(4x4). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "rtl8111h-cg"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "rtl8111h-cg.kicad_sym",+    "rtl8111h-cg.kicad_mod",+    "rtl8111h-cg.glb",+    "rtl8111h-cg.step",+    "rtl8111h-cg.lbr",+    "docs/hero.png",+    "docs/rtl8111h-cg-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file