component
RT9711AGB
Public Made by Adomby adom
Richtek Tech AC-DC Controllers and Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.md+14@@ -72,6 +72,20 @@ RT9711AGB from Richtek Tech, in a SOT-23-5. Pinout and pin descriptions extracte - Footprint: `Package_TO_SOT_SMD:SOT-23-5` - 3D model: SOT-23-5 (KiCad packages3D, STEP) +## 3D model downloads++Two STEP files. Same geometry, different body top:++| File | Size | Use it when |+|---|---|---|+| [`rt9711agb.step`](rt9711agb.step) | 85 KB | You want the bare part, or you mark your own boards. |+| [`rt9711agb-etched.step`](rt9711agb-etched.step) | 1.5 MB | You want the part with `RT9711AGB` already on it. |++The marking in the etched file is real recessed geometry cut into the solid, not a+texture or a decal: 392 faces against 102 in the bare model. It+survives export, section views, and rendering in any CAD tool, and it drops straight+into KiCad or Fusion with no extra setup.+ ## Provenance Data extracted from the manufacturer datasheet, not a distributor listing:
package.json+1−1@@ -1,6 +1,6 @@ { "slug": "rt9711agb",- "version": "0.1.0",+ "version": "0.2.0", "type": "component", "description": "Richtek Tech AC-DC Controllers and Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [
page.json+9−9@@ -4,7 +4,7 @@ "slug": "rt9711agb", "title": "RT9711AGB", "brief": "Richtek Tech AC-DC Controllers and Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.2.0", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -34,7 +34,7 @@ "number": "1", "name": "FLG", "type": "output",- "description": "Open-drain fault flag output. Asserts low (typ. 20 \u03a9 pull-down, IFLG_OFF \u2264 1 \u03bcA leakage when off) after a 12 ms (typ.) delay when an over-current, thermal-shutdown, or reverse-current fault is detected. Requires an external 10 k\u03a9-100 k\u03a9 pull-up resistor to the USB controller supply. Absolute-max flag voltage 6.5 V."+ "description": "Open-drain fault flag output. Asserts low (typ. 20 Ω pull-down, IFLG_OFF ≤ 1 μA leakage when off) after a 12 ms (typ.) delay when an over-current, thermal-shutdown, or reverse-current fault is detected. Requires an external 10 kΩ-100 kΩ pull-up resistor to the USB controller supply. Absolute-max flag voltage 6.5 V." }, { "number": "2",@@ -46,19 +46,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Chip enable input (active-high on the RT9711A variant). Logic-high (VIH \u2265 2.0 V) turns the internal N-MOSFET switch on; logic-low (VIL \u2264 0.8 V) turns it off. Input range 0 V to 5.5 V, input leakage 0.01 \u03bcA typ. Must never be left floating. When disabled the pin is pulled low internally through ~75 \u03a9 (RDS shutdown)."+ "description": "Chip enable input (active-high on the RT9711A variant). Logic-high (VIH ≥ 2.0 V) turns the internal N-MOSFET switch on; logic-low (VIL ≤ 0.8 V) turns it off. Input range 0 V to 5.5 V, input leakage 0.01 μA typ. Must never be left floating. When disabled the pin is pulled low internally through ~75 Ω (RDS shutdown)." }, { "number": "4", "name": "VIN", "type": "power_in",- "description": "Power input to the internal high-side N-MOSFET switch and to the internal bias/charge-pump/UVLO circuitry. Recommended operating range 2.5 V to 5.5 V (absolute max 6.5 V). Decouple locally with a 1 \u03bcF CIN capacitor to GND. UVLO releases at ~1.7 V rising."+ "description": "Power input to the internal high-side N-MOSFET switch and to the internal bias/charge-pump/UVLO circuitry. Recommended operating range 2.5 V to 5.5 V (absolute max 6.5 V). Decouple locally with a 1 μF CIN capacitor to GND. UVLO releases at ~1.7 V rising." }, { "number": "5", "name": "VOUT", "type": "power_out",- "description": "Switched power output (drain of the internal N-MOSFET) to the downstream USB port/load. Delivers up to 1.5 A continuous (current limit ILIM = 2.5 A typ., 1.6-3.2 A). RDS(on) 80 m\u03a9 typ. at VIN = 5 V, IOUT = 1 A. A low-ESR \u2265150 \u03bcF aluminum/tantalum bulk capacitor plus a 10 \u03bcF ceramic to GND is recommended to meet the USB VBUS 330 mV droop requirement. Can be forced higher than VIN when off (no body diode)."+ "description": "Switched power output (drain of the internal N-MOSFET) to the downstream USB port/load. Delivers up to 1.5 A continuous (current limit ILIM = 2.5 A typ., 1.6-3.2 A). RDS(on) 80 mΩ typ. at VIN = 5 V, IOUT = 1 A. A low-ESR ≥150 μF aluminum/tantalum bulk capacitor plus a 10 μF ceramic to GND is recommended to meet the USB VBUS 330 mV droop requirement. Can be forced higher than VIN when off (no body diode)." } ], "provenance": {@@ -132,9 +132,9 @@ "docs/hero.png", "docs/rt9711agb-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "pads.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "Richtek Tech AC-DC Controllers and Regulators, SOT-23-5. Datasheet-verified pinout, KiCad symbol/footprint/3D." }