← Commit history
rt9277bgf: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "RT9277BGF",+ "manufacturer": "Richtek Tech",+ "package": "MSOP-8",+ "pin_count": 8,+ "category": "DC-DC Converters",+ "parts": {+ "symbol": "rt9277bgf.kicad_sym",+ "footprint": "rt9277bgf.kicad_mod",+ "model_3d": "rt9277bgf-etched.glb",+ "model_3d_plain": "rt9277bgf.glb",+ "model_3d_step": "rt9277bgf-etched.step",+ "model_3d_step_plain": "rt9277bgf.step",+ "lbr": "rt9277bgf.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "COMP",+ "type": "output",+ "description": "Compensation pin for the internal error amplifier. Connect an external R-C compensation network (R3, C3, and optionally C4) from this pin to GND to set the loop response. Reference voltage at FB is 1.24V typical."+ },+ {+ "number": "2",+ "name": "FB",+ "type": "input",+ "description": "Feedback input pin. Connect an external resistor divider from VOUT to FB to GND to program the output voltage. Typical internal reference voltage is 1.24V; VOUT = 1.24V x (1 + R1/R2)."+ },+ {+ "number": "3",+ "name": "EN",+ "type": "input",+ "description": "Shutdown/Enable control input. Drive EN high (VIH >= 0.7 x VIN) to enable the converter; drive to GND (VIL <= 0.3 x VIN) to shut the RT9277B off and reduce supply current to ~0.1μA. Hysteresis ~0.1V."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground return. Connect to the system ground plane with a low-impedance path close to the input and output capacitors."+ },+ {+ "number": "5",+ "name": "LX",+ "type": "power_out",+ "description": "Switching node - drain of the internal N-channel power MOSFET (RDS(ON) ~200mΩ, 1.6A current limit, 16V rating). Connect the boost inductor and the anode of the catch (Schottky) diode to this pin. Keep the trace short and wide to minimize EMI."+ },+ {+ "number": "6",+ "name": "VIN",+ "type": "power_in",+ "description": "Supply input, 2.5V to 5.5V operating range (absolute max 6V). Place at least a 1μF (typically 10μF) low-ESR ceramic bypass capacitor close to this pin. UVLO ~2V typical."+ },+ {+ "number": "7",+ "name": "FREQ",+ "type": "input",+ "description": "Oscillator frequency select input. Tie to GND (or leave floating - internal 5μA pull-down) for 640kHz operation, or tie to VIN for 1.2MHz operation."+ },+ {+ "number": "8",+ "name": "SS",+ "type": "passive",+ "description": "Soft-start control pin (RT9277B only). Connect an external soft-start capacitor CSS (typically 10nF to 200nF) from this pin to GND. A 4μA constant current charges CSS from 0V toward 1.24V, ramping the peak inductor current during startup. Discharged to GND when EN=GND. Leave floating to disable soft-start."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}