RT9048GSP - Commit

Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

distributor part numbers (lcsc=C2983594). page.json only: this page's .lbr could not be rebuilt because the symbol pin numbers do not resolve against the footprint pad names (connect-pad-unresolved), and publishing a library that fails validate would be worse than leaving the old one. Once the footprint is fixed a rebuild will carry these into <technology> automatically.

Ray ·6dd48e003e ·2mo ago ·parent 9456590

1 file changed +8−6

page.json+8−6

@@ -26,7 +26,9 @@       "model_3d_step": "rt9048gsp.step",       "lbr": "rt9048gsp.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C2983594"+    },     "pins": [       {         "number": "1",@@ -38,13 +40,13 @@         "number": "2",         "name": "EN",         "type": "input",-        "description": "Enable control input (Active-High). Pulling below 0.4V turns the regulator off, reducing quiescent current to ~1.5μA. Enable threshold typ. 1.08V rising / 1.02V falling at VIN=3.3V. Device is enabled if left open; connect to VIN if not used."+        "description": "Enable control input (Active-High). Pulling below 0.4V turns the regulator off, reducing quiescent current to ~1.5\u03bcA. Enable threshold typ. 1.08V rising / 1.02V falling at VIN=3.3V. Device is enabled if left open; connect to VIN if not used."       },       {         "number": "3",         "name": "VIN",         "type": "power_in",-        "description": "Supply voltage input. For full-load regulation, input must be between (VOUT + 0.5V) and 6V. Minimum input voltage is 1.4V. Place a large bulk cap plus at least a 10μF ceramic capacitor directly at this pin."+        "description": "Supply voltage input. For full-load regulation, input must be between (VOUT + 0.5V) and 6V. Minimum input voltage is 1.4V. Place a large bulk cap plus at least a 10\u03bcF ceramic capacitor directly at this pin."       },       {         "number": "4",@@ -62,13 +64,13 @@         "number": "6",         "name": "VOUT",         "type": "power_out",-        "description": "Regulated output voltage, adjustable from 0.5V up to VIN − VDROP, sourcing up to 2A. Place a minimum 10μF ceramic capacitor directly at this pin for stability."+        "description": "Regulated output voltage, adjustable from 0.5V up to VIN \u2212 VDROP, sourcing up to 2A. Place a minimum 10\u03bcF ceramic capacitor directly at this pin for stability."       },       {         "number": "7",         "name": "ADJ",         "type": "input",-        "description": "Feedback voltage input, VADJ = 0.5V (typ). If tied to VOUT, output is set to 0.5V. Otherwise VOUT = 0.5V × (1 + R1/R2) via an external resistor divider. Very low IADJ (~20nA) permits divider resistors up to 800kΩ."+        "description": "Feedback voltage input, VADJ = 0.5V (typ). If tied to VOUT, output is set to 0.5V. Otherwise VOUT = 0.5V \u00d7 (1 + R1/R2) via an external resistor divider. Very low IADJ (~20nA) permits divider resistors up to 800k\u03a9."       },       {         "number": "8",@@ -80,7 +82,7 @@         "number": "9",         "name": "GND",         "type": "power_in",-        "description": "Exposed thermal pad (bottom of package). Must be soldered to a large PCB ground plane and connected to GND for maximum power dissipation (θJA = 49°C/W on a 4-layer JEDEC board)."+        "description": "Exposed thermal pad (bottom of package). Must be soldered to a large PCB ground plane and connected to GND for maximum power dissipation (\u03b8JA = 49\u00b0C/W on a 4-layer JEDEC board)."       }     ],     "provenance": {