← Commit history
page.json+8−5@@ -32,7 +32,7 @@ "number": "1", "name": "VIN", "type": "power_in",- "description": "Voltage input supply pin. Operating range 2.2V to 5.5V (absolute max 6V). Bypass with at least 1\u03bcF ceramic capacitor placed within 0.5 inch of the pin."+ "description": "Voltage input supply pin. Operating range 2.2V to 5.5V (absolute max 6V). Bypass with at least 1μF ceramic capacitor placed within 0.5 inch of the pin." }, { "number": "2",@@ -44,19 +44,19 @@ "number": "3", "name": "EN", "type": "input",- "description": "Chip enable, active high. Regulator turns on when VEN > 1.6V and enters shutdown when VEN < 0.6V. EN input current is typically 0.1\u03bcA (max 1\u03bcA). Absolute max 6V. Tie to VIN if enable is not needed."+ "description": "Chip enable, active high. Regulator turns on when VEN > 1.6V and enters shutdown when VEN < 0.6V. EN input current is typically 0.1μA (max 1μA). Absolute max 6V. Tie to VIN if enable is not needed." }, { "number": "4", "name": "FB", "type": "input",- "description": "Output voltage feedback. Connect to the midpoint of an external R1/R2 divider from VOUT to GND. VOUT = VFB \u00d7 (1 + R1/R2), where VFB = 1.2V (typ). FB pin current is typically 0.1\u03bcA (max 1\u03bcA)."+ "description": "Output voltage feedback. Connect to the midpoint of an external R1/R2 divider from VOUT to GND. VOUT = VFB × (1 + R1/R2), where VFB = 1.2V (typ). FB pin current is typically 0.1μA (max 1μA)." }, { "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated voltage output. Supplies up to 400mA with 230mV typical dropout at full load. Current-limited at 650mA (typ). Requires at least 1\u03bcF ceramic output capacitor within 0.5 inch of the pin for stability."+ "description": "Regulated voltage output. Supplies up to 400mA with 230mV typical dropout at full load. Current-limited at 650mA (typ). Requires at least 1μF ceramic output capacitor within 0.5 inch of the pin for stability." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/rt9043gb-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }