← Commit history
page.json+7−4@@ -32,7 +32,7 @@ "number": "1", "name": "EN", "type": "input",- "description": "Enable input, active high (TTL logic). Drive high (VIH \u2265 1.6V, \u22645.5V) to enable the regulator; drive low (VIL \u2264 0.6V) to enter shutdown mode (~0.7\u00b5A). Enable pin current \u22641\u00b5A. Do not float - use a pull-down (e.g. 100k) when driven by a high-impedance source."+ "description": "Enable input, active high (TTL logic). Drive high (VIH ≥ 1.6V, ≤5.5V) to enable the regulator; drive low (VIL ≤ 0.6V) to enter shutdown mode (~0.7µA). Enable pin current ≤1µA. Do not float - use a pull-down (e.g. 100k) when driven by a high-impedance source." }, { "number": "2",@@ -44,7 +44,7 @@ "number": "3", "name": "VIN", "type": "power_in",- "description": "Supply input. Operating range 2.2V to 5.5V (absolute max 6V). Bypass with a 1\u00b5F X7R ceramic capacitor to GND close to the pin."+ "description": "Supply input. Operating range 2.2V to 5.5V (absolute max 6V). Bypass with a 1µF X7R ceramic capacitor to GND close to the pin." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "VOUT", "type": "power_out",- "description": "Regulated output, fixed 2.8V \u00b12% (for the '28' option) at up to 500mA. Requires a 1\u00b5F X7R ceramic output capacitor for stability. Current limit ~0.5-0.6A typical; dropout 250mV typ at 500mA (VIN \u2265 2.7V)."+ "description": "Regulated output, fixed 2.8V ±2% (for the '28' option) at up to 500mA. Requires a 1µF X7R ceramic output capacitor for stability. Current limit ~0.5-0.6A typical; dropout 250mV typ at 500mA (VIN ≥ 2.7V)." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/rt9013-28gb-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }