← Commit history
page.json+180−8@@ -1,13 +1,190 @@ {+ "schema_version": 1,+ "type": "component", "slug": "rt8575gqw",+ "title": "RT8575GQW",+ "brief": "Richtek Tech LED Drivers, DFN-16-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "Richtek Tech LED Drivers, DFN-16-EP(5x5). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "led drivers", "rt8575gqw" ],+ "component": {+ "mpn": "RT8575GQW",+ "manufacturer": "Richtek Tech",+ "package": "DFN-16-EP(5x5)",+ "pin_count": 17,+ "category": "LED Drivers",+ "subcategory": "LED Drivers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784662370516992",+ "parts": {+ "symbol": "rt8575gqw.kicad_sym",+ "footprint": "rt8575gqw.kicad_mod",+ "model_3d": "rt8575gqw.glb",+ "model_3d_step": "rt8575gqw.step",+ "lbr": "rt8575gqw.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "CH1",+ "type": "input",+ "description": "Current sink for LED string 1. Connect to bottom cathode of LED string. Absolute max 66V. Connect to GND if channel is unused (auto-disabled during startup)."+ },+ {+ "number": "2",+ "name": "CH2",+ "type": "input",+ "description": "Current sink for LED string 2. Connect to bottom cathode of LED string. Absolute max 66V. Connect to GND if channel is unused."+ },+ {+ "number": "3",+ "name": "CH3",+ "type": "input",+ "description": "Current sink for LED string 3. Connect to bottom cathode of LED string. Absolute max 66V. Connect to GND if channel is unused."+ },+ {+ "number": "4",+ "name": "CH4",+ "type": "input",+ "description": "Current sink for LED string 4. Connect to bottom cathode of LED string. Absolute max 66V. Connect to GND if channel is unused."+ },+ {+ "number": "5",+ "name": "AGND",+ "type": "power_in",+ "description": "Analog ground. Return for internal analog reference and control circuitry."+ },+ {+ "number": "6",+ "name": "ISET",+ "type": "input",+ "description": "LED current setting. Connect resistor RISET from ISET to GND to program per-channel LED current (50-150mA). VISET is typically 1V. Do not short to GND."+ },+ {+ "number": "7",+ "name": "COMP",+ "type": "passive",+ "description": "Error amplifier compensation node for the boost loop. Connect an R-C compensation network to ground."+ },+ {+ "number": "8",+ "name": "RT",+ "type": "input",+ "description": "Switching frequency selection input. Resistor from RT to GND sets the boost switching frequency, adjustable 150kHz to 500kHz."+ },+ {+ "number": "9",+ "name": "PWM",+ "type": "input",+ "description": "PWM dimming control input. Accepts input dimming frequency 120Hz to 1kHz for LED brightness modulation without inrush current."+ },+ {+ "number": "10",+ "name": "EN",+ "type": "input",+ "description": "Chip enable, active high. High-impedance input; add a 100k\u03a9 pull-down to GND when the control signal source can float. Absolute max 44V."+ },+ {+ "number": "11",+ "name": "VIN",+ "type": "power_in",+ "description": "Power supply input. Operating range 4.2V to 24V; absolute max 44V. Bypass with local CIN capacitors to PGND."+ },+ {+ "number": "12",+ "name": "LX",+ "type": "power_out",+ "description": "Switching node of the internal 60V, 150m\u03a9 boost power switch. Connect to boost inductor and Schottky rectifier. Absolute max 66V. Tie in parallel with pin 13."+ },+ {+ "number": "13",+ "name": "LX",+ "type": "power_out",+ "description": "Switching node of the internal boost power switch (paralleled with pin 12). Connect to boost inductor and Schottky rectifier."+ },+ {+ "number": "14",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground of the boost converter. Tie together with pins 15 and 17 (exposed pad) to a large PCB copper area for maximum power dissipation."+ },+ {+ "number": "15",+ "name": "PGND",+ "type": "power_in",+ "description": "Power ground of the boost converter. Tie together with pins 14 and 17 (exposed pad)."+ },+ {+ "number": "16",+ "name": "OVP",+ "type": "input",+ "description": "Over-voltage protection sense input for the boost converter. Detection threshold is typically 1.2V; set via resistor divider from VOUT."+ },+ {+ "number": "17",+ "name": "PGND",+ "type": "power_in",+ "description": "Exposed thermal pad. Power ground of the boost converter. Must be soldered to a large PCB copper area and tied to PGND (pins 14/15) for thermal and electrical performance."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589784662370516992",+ "pages": null,+ "sha256": "9d811c6a0ca1bf5d",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 17,+ "described": 17,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "Richtek Tech",+ "Package": "DFN-16-EP(5x5)",+ "Category": "LED Drivers",+ "Pins": "17"+ }+ },+ "variants": [+ {+ "mpn": "RT8575GQW",+ "kind": "packaging"+ },+ {+ "mpn": "RT8575GQWGN",+ "kind": "packaging"+ }+ ],+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "rt8575gqw"+ ],+ "discovery_pitch": "RT8575GQW (Richtek Tech) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +202,5 @@ "docs/rt8575gqw-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }