← Commit history
page.json+10−7@@ -44,37 +44,37 @@ "number": "3", "name": "TXD", "type": "input",- "description": "UART transmit data input from host MCU. 5V logic (VIH \u2265 0.7\u00b7VCC, VIL \u2264 0.3\u00b7VCC). Internal 10 k\u03a9 pull-up; drive current 2 mA. Data on TXD is transmitted onto the A/B bus when CON is low."+ "description": "UART transmit data input from host MCU. 5V logic (VIH ≥ 0.7·VCC, VIL ≤ 0.3·VCC). Internal 10 kΩ pull-up; drive current 2 mA. Data on TXD is transmitted onto the A/B bus when CON is low." }, { "number": "4", "name": "RXD", "type": "output",- "description": "UART receive data output to host MCU. Push-pull output (VOH \u2265 VCC-0.4 V, VOL \u2264 0.4 V at 4 mA), max output current 10 mA. Reflects the A/B bus differential state when CON is high."+ "description": "UART receive data output to host MCU. Push-pull output (VOH ≥ VCC-0.4 V, VOL ≤ 0.4 V at 4 mA), max output current 10 mA. Reflects the A/B bus differential state when CON is high." }, { "number": "5", "name": "CON", "type": "input",- "description": "Transmit/receive direction control. CON=0 (low) \u2192 transmit mode (drives A/B from TXD); CON=1 (high) \u2192 receive mode (drives RXD from A/B). Note: polarity is inverted from a standard RS-485 transceiver's DE/RE. VIH \u2265 3.8V (RSM485CT), VIL \u2264 0.3\u00b7VCC. Drive current 5 mA."+ "description": "Transmit/receive direction control. CON=0 (low) → transmit mode (drives A/B from TXD); CON=1 (high) → receive mode (drives RXD from A/B). Note: polarity is inverted from a standard RS-485 transceiver's DE/RE. VIH ≥ 3.8V (RSM485CT), VIL ≤ 0.3·VCC. Drive current 5 mA." }, { "number": "8", "name": "B", "type": "bidirectional",- "description": "RS-485 differential bus line B (inverting). Internally biased with 22 k\u03a9 pull-down/up network; integrated ESD protection. Differential output voltage |A-B| \u2265 1.5V into 54\u03a9 load; input impedance \u2265 96 k\u03a9 over -7V \u2264 VCM \u2264 +12V."+ "description": "RS-485 differential bus line B (inverting). Internally biased with 22 kΩ pull-down/up network; integrated ESD protection. Differential output voltage |A-B| ≥ 1.5V into 54Ω load; input impedance ≥ 96 kΩ over -7V ≤ VCM ≤ +12V." }, { "number": "9", "name": "A", "type": "bidirectional",- "description": "RS-485 differential bus line A (non-inverting). Internally biased with 22 k\u03a9 pull-down/up network; integrated ESD protection. Paired with B to form the isolated RS-485 differential bus."+ "description": "RS-485 differential bus line A (non-inverting). Internally biased with 22 kΩ pull-down/up network; integrated ESD protection. Paired with B to form the isolated RS-485 differential bus." }, { "number": "10", "name": "RGND", "type": "power_out",- "description": "Isolated output-side ground (secondary side reference for the A/B RS-485 bus). Galvanically isolated from GND (pin 2) by 2.5 kVDC. May be left floating if not used; in noisy environments connect to cable shield / earth through impedance network per \u00a79.5."+ "description": "Isolated output-side ground (secondary side reference for the A/B RS-485 bus). Galvanically isolated from GND (pin 2) by 2.5 kVDC. May be left floating if not used; in noisy environments connect to cable shield / earth through impedance network per §9.5." } ], "provenance": {@@ -148,5 +148,8 @@ "docs/rsm485ct-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }