← Commit history

rs8552xm: factory component page (tier=lcsc)

Ray ·394944785b · ·parent 7ed7ff1
3 files changed +26−23
README.md+8−8
@@ -8,14 +8,14 @@ RS8552XM from Jiangsu RUNIC Tech, in a MSOP-8. Pinout and pin descriptions extra  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OUTA | output | Amplifier A output. Rail-to-rail push-pull CMOS output, swings within a few mV of V+/V- into light loads (VOH = 4.998 V, VOL = 1 mV typical with 100 kOhm to rail at Vs = 5 V). Short-circuit current ~50 mA typ. |-| 2 | -INA | input | Amplifier A inverting input. High-impedance CMOS input, common-mode range extends 100 mV beyond either supply rail. Input bias current 50 pA typ; input diode-clamped to supply rails (limit external swing beyond rails to <=10 mA). |-| 3 | +INA | input | Amplifier A non-inverting input. High-impedance CMOS input, rail-to-rail common-mode range (V- - 0.1 V to V+ + 0.1 V). Input bias current 50 pA typ. |-| 4 | V- | power_in | Negative supply rail (or ground in single-supply operation). Total supply V+ minus V- must be between 2.7 V and 5.5 V (7.0 V absolute maximum). Bypass with a 0.1 uF capacitor placed close to the pin. |-| 5 | +INB | input | Amplifier B non-inverting input. High-impedance CMOS input, rail-to-rail common-mode range. Input bias current 50 pA typ. |-| 6 | -INB | input | Amplifier B inverting input. High-impedance CMOS input, common-mode range extends 100 mV beyond either supply rail. Input bias current 50 pA typ. |-| 7 | OUTB | output | Amplifier B output. Rail-to-rail push-pull CMOS output. Short-circuit current ~50 mA typ; overload recovery time ~1 us. |-| 8 | V+ | power_in | Positive supply rail. Total supply (V+ to V-) 2.7 V to 5.5 V (7.0 V absolute maximum). Quiescent current 640 uA per amplifier typ. Bypass with a 0.1 uF capacitor placed close to the pin. |+| 1 | OUTA | output | Amplifier A output. Rail-to-rail CMOS output stage; short-circuit current 50 mA typ. VOH within ~2 mV of V+ with 100 kΩ load; VOL within ~1 mV of V- with 100 kΩ load. |+| 2 | -INA | input | Amplifier A inverting input. High-impedance CMOS input, rail-to-rail common-mode range (V--0.1 V to V++0.1 V). Diode-clamped to supply rails. |+| 3 | +INA | input | Amplifier A non-inverting input. High-impedance CMOS input, rail-to-rail common-mode range (V--0.1 V to V++0.1 V). Input bias current 50 pA typ. |+| 4 | V- | power_in | Negative supply rail (or ground for single-supply operation). Operating supply range +2.7 V to +5.5 V total (V+ minus V-); absolute maximum 7 V. Bypass with 0.1 µF ceramic close to the pin. |+| 5 | +INB | input | Amplifier B non-inverting input. High-impedance CMOS input, rail-to-rail common-mode range (V--0.1 V to V++0.1 V). Input bias current 50 pA typ. |+| 6 | -INB | input | Amplifier B inverting input. High-impedance CMOS input, rail-to-rail common-mode range (V--0.1 V to V++0.1 V). Diode-clamped to supply rails. |+| 7 | OUTB | output | Amplifier B output. Rail-to-rail CMOS output stage; short-circuit current 50 mA typ. VOH within ~2 mV of V+ with 100 kΩ load; VOL within ~1 mV of V- with 100 kΩ load. |+| 8 | V+ | power_in | Positive supply rail. Operating supply range +2.7 V to +5.5 V total (V+ minus V-); absolute maximum 7 V. Bypass with 0.1 µF ceramic close to the pin. |  ## Key specifications 
page.json+9−12
@@ -32,49 +32,49 @@         "number": "1",         "name": "OUTA",         "type": "output",-        "description": "Amplifier A output. Rail-to-rail push-pull CMOS output, swings within a few mV of V+/V- into light loads (VOH = 4.998 V, VOL = 1 mV typical with 100 kOhm to rail at Vs = 5 V). Short-circuit current ~50 mA typ."+        "description": "Amplifier A output. Rail-to-rail CMOS output stage; short-circuit current 50 mA typ. VOH within ~2 mV of V+ with 100 k\u03a9 load; VOL within ~1 mV of V- with 100 k\u03a9 load."       },       {         "number": "2",         "name": "-INA",         "type": "input",-        "description": "Amplifier A inverting input. High-impedance CMOS input, common-mode range extends 100 mV beyond either supply rail. Input bias current 50 pA typ; input diode-clamped to supply rails (limit external swing beyond rails to <=10 mA)."+        "description": "Amplifier A inverting input. High-impedance CMOS input, rail-to-rail common-mode range (V--0.1 V to V++0.1 V). Diode-clamped to supply rails."       },       {         "number": "3",         "name": "+INA",         "type": "input",-        "description": "Amplifier A non-inverting input. High-impedance CMOS input, rail-to-rail common-mode range (V- - 0.1 V to V+ + 0.1 V). Input bias current 50 pA typ."+        "description": "Amplifier A non-inverting input. High-impedance CMOS input, rail-to-rail common-mode range (V--0.1 V to V++0.1 V). Input bias current 50 pA typ."       },       {         "number": "4",         "name": "V-",         "type": "power_in",-        "description": "Negative supply rail (or ground in single-supply operation). Total supply V+ minus V- must be between 2.7 V and 5.5 V (7.0 V absolute maximum). Bypass with a 0.1 uF capacitor placed close to the pin."+        "description": "Negative supply rail (or ground for single-supply operation). Operating supply range +2.7 V to +5.5 V total (V+ minus V-); absolute maximum 7 V. Bypass with 0.1 \u00b5F ceramic close to the pin."       },       {         "number": "5",         "name": "+INB",         "type": "input",-        "description": "Amplifier B non-inverting input. High-impedance CMOS input, rail-to-rail common-mode range. Input bias current 50 pA typ."+        "description": "Amplifier B non-inverting input. High-impedance CMOS input, rail-to-rail common-mode range (V--0.1 V to V++0.1 V). Input bias current 50 pA typ."       },       {         "number": "6",         "name": "-INB",         "type": "input",-        "description": "Amplifier B inverting input. High-impedance CMOS input, common-mode range extends 100 mV beyond either supply rail. Input bias current 50 pA typ."+        "description": "Amplifier B inverting input. High-impedance CMOS input, rail-to-rail common-mode range (V--0.1 V to V++0.1 V). Diode-clamped to supply rails."       },       {         "number": "7",         "name": "OUTB",         "type": "output",-        "description": "Amplifier B output. Rail-to-rail push-pull CMOS output. Short-circuit current ~50 mA typ; overload recovery time ~1 us."+        "description": "Amplifier B output. Rail-to-rail CMOS output stage; short-circuit current 50 mA typ. VOH within ~2 mV of V+ with 100 k\u03a9 load; VOL within ~1 mV of V- with 100 k\u03a9 load."       },       {         "number": "8",         "name": "V+",         "type": "power_in",-        "description": "Positive supply rail. Total supply (V+ to V-) 2.7 V to 5.5 V (7.0 V absolute maximum). Quiescent current 640 uA per amplifier typ. Bypass with a 0.1 uF capacitor placed close to the pin."+        "description": "Positive supply rail. Operating supply range +2.7 V to +5.5 V total (V+ minus V-); absolute maximum 7 V. Bypass with 0.1 \u00b5F ceramic close to the pin."       }     ],     "provenance": {@@ -138,8 +138,5 @@     "docs/rs8552xm-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file
rs8552xm.lbr+9−3
@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>Jiangsu RUNIC Tech Precision OpAmps, MSOP-8</description> <packages> <package name="MSOP-8_3x3mm_P0.65mm">   <description>MSOP-8, 3 x 3 mm, 0.65 mm pitch</description>@@ -86,6 +86,7 @@ </packages> <symbols> <symbol name="RS8552XM">+  <description>Jiangsu RUNIC Tech Precision OpAmps, MSOP-8</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-7.62" width="0.254" layer="94"/>   <wire x1="12.7" y1="-7.62" x2="-12.7" y2="-7.62" width="0.254" layer="94"/>@@ -104,7 +105,7 @@ </symbols> <devicesets> <deviceset name="RS8552XM" prefix="U">-  <description></description>+  <description>Jiangsu RUNIC Tech Precision OpAmps, MSOP-8</description>   <gates>     <gate name="G$1" symbol="RS8552XM" x="0" y="0"/>   </gates>@@ -120,7 +121,12 @@         <connect gate="G$1" pin="-INB" pad="6"/>         <connect gate="G$1" pin="+INB" pad="5"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="RS8552XM" constant="no"/>+          <attribute name="MANUFACTURER" value="Jiangsu RUNIC Tech" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>