← Commit history
rs8454pxp: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+110−1
page.json+110−1@@ -33,5 +33,114 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "RS8454PXP",+ "manufacturer": "Jiangsu RUNIC Tech",+ "package": "SOP-14",+ "pin_count": 14,+ "category": "Operational Amplifier",+ "parts": {+ "symbol": "rs8454pxp.kicad_sym",+ "footprint": "rs8454pxp.kicad_mod",+ "model_3d": "rs8454pxp-etched.glb",+ "model_3d_plain": "rs8454pxp.glb",+ "model_3d_step": "rs8454pxp-etched.step",+ "model_3d_step_plain": "rs8454pxp.step",+ "lbr": "rs8454pxp.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "OUTA",+ "type": "output",+ "description": "Output of channel A op-amp. Rail-to-rail output stage capable of sourcing/sinking up to ~150mA short-circuit current; drives loads down to 10kΩ with output swing to within ~150mV of the rails."+ },+ {+ "number": "2",+ "name": "-INA",+ "type": "input",+ "description": "Inverting input of channel A. High-impedance CMOS input with ultra-low input bias current (~10pA typ). Diode-clamped to the supply rails; limit input current to ≤10mA if signals exceed rails by >0.5V."+ },+ {+ "number": "3",+ "name": "+INA",+ "type": "input",+ "description": "Noninverting input of channel A. High-impedance CMOS input; common-mode range from V- to (V+)-2V. Diode-clamped to supply rails."+ },+ {+ "number": "4",+ "name": "V+",+ "type": "power_in",+ "description": "Positive (highest) power supply. Single-supply range +5V to +36V, or dual-supply ±2.5V to ±18V. Quiescent current ~2.75mA/amplifier (11mA total for the quad)."+ },+ {+ "number": "5",+ "name": "+INB",+ "type": "input",+ "description": "Noninverting input of channel B. High-impedance CMOS input; common-mode range from V- to (V+)-2V. Diode-clamped to supply rails."+ },+ {+ "number": "6",+ "name": "-INB",+ "type": "input",+ "description": "Inverting input of channel B. High-impedance CMOS input with ultra-low input bias current (~10pA typ). Diode-clamped to the supply rails; limit input current to ≤10mA if signals exceed rails by >0.5V."+ },+ {+ "number": "7",+ "name": "OUTB",+ "type": "output",+ "description": "Output of channel B op-amp. Rail-to-rail output stage capable of sourcing/sinking up to ~150mA short-circuit current; drives loads down to 10kΩ."+ },+ {+ "number": "8",+ "name": "OUTC",+ "type": "output",+ "description": "Output of channel C op-amp. Rail-to-rail output stage capable of sourcing/sinking up to ~150mA short-circuit current; drives loads down to 10kΩ."+ },+ {+ "number": "9",+ "name": "-INC",+ "type": "input",+ "description": "Inverting input of channel C. High-impedance CMOS input with ultra-low input bias current (~10pA typ). Diode-clamped to the supply rails; limit input current to ≤10mA if signals exceed rails by >0.5V."+ },+ {+ "number": "10",+ "name": "+INC",+ "type": "input",+ "description": "Noninverting input of channel C. High-impedance CMOS input; common-mode range from V- to (V+)-2V. Diode-clamped to supply rails."+ },+ {+ "number": "11",+ "name": "V-",+ "type": "power_in",+ "description": "Negative (lowest) power supply, or ground for single-supply operation. Total supply|V+ - V-|must be 5V to 36V (absolute max 36V)."+ },+ {+ "number": "12",+ "name": "+IND",+ "type": "input",+ "description": "Noninverting input of channel D. High-impedance CMOS input; common-mode range from V- to (V+)-2V. Diode-clamped to supply rails."+ },+ {+ "number": "13",+ "name": "-IND",+ "type": "input",+ "description": "Inverting input of channel D. High-impedance CMOS input with ultra-low input bias current (~10pA typ). Diode-clamped to the supply rails; limit input current to ≤10mA if signals exceed rails by >0.5V."+ },+ {+ "number": "14",+ "name": "OUTD",+ "type": "output",+ "description": "Output of channel D op-amp. Rail-to-rail output stage capable of sourcing/sinking up to ~150mA short-circuit current; drives loads down to 10kΩ."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}