← Commit history

Set visibility: public

Ray ·52264d491a · ·parent 5c07015
1 file changed +8−5
page.json+8−5
@@ -32,13 +32,13 @@         "number": "1",         "name": "MR",         "type": "input",-        "description": "Active-low Manual-Reset input. Triggers a reset pulse when pulled below 0.8V. Has an internal 20-120k\u03a9 (52k\u03a9 typ) pull-up; can be driven from TTL/CMOS logic or shorted to GND via a pushbutton."+        "description": "Active-low Manual-Reset input. Triggers a reset pulse when pulled below 0.8V. Has an internal 20-120kΩ (52kΩ typ) pull-up; can be driven from TTL/CMOS logic or shorted to GND via a pushbutton."       },       {         "number": "2",         "name": "VCC",         "type": "power_in",-        "description": "Power supply voltage that is monitored. Operating range 1.0V to 5.5V; supply current 20\u00b5A typical, 40\u00b5A max."+        "description": "Power supply voltage that is monitored. Operating range 1.0V to 5.5V; supply current 20µA typical, 40µA max."       },       {         "number": "3",@@ -56,7 +56,7 @@         "number": "5",         "name": "PFO",         "type": "output",-        "description": "Active-low Power-Fail output. Sinks current when PFI < 1.2V; otherwise stays high. Push-pull output (VOH \u2265 0.7\u00d7VCC at 800\u00b5A source; VOL \u2264 0.4V at 1.2mA sink)."+        "description": "Active-low Power-Fail output. Sinks current when PFI < 1.2V; otherwise stays high. Push-pull output (VOH ≥ 0.7×VCC at 800µA source; VOL ≤ 0.4V at 1.2mA sink)."       },       {         "number": "6",@@ -68,7 +68,7 @@         "number": "7",         "name": "RESET",         "type": "output",-        "description": "Active-low reset output. Pulses low for 160ms after VCC rises above the 2.63V reset threshold or after MR goes high; remains low whenever VCC is below the threshold. Push-pull (VOH \u2265 0.7\u00d7VCC at 500\u00b5A source; VOL \u2264 0.4V at 1.2mA sink). Guaranteed valid down to VCC=1.0V. Watchdog timeout does not trigger RESET unless WDO is tied to MR."+        "description": "Active-low reset output. Pulses low for 160ms after VCC rises above the 2.63V reset threshold or after MR goes high; remains low whenever VCC is below the threshold. Push-pull (VOH ≥ 0.7×VCC at 500µA source; VOL ≤ 0.4V at 1.2mA sink). Guaranteed valid down to VCC=1.0V. Watchdog timeout does not trigger RESET unless WDO is tied to MR."       },       {         "number": "8",@@ -144,5 +144,8 @@     "docs/rs706-2-63yk-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ]+  ],+  "visibility": {+    "public": true+  } }\ No newline at end of file