← Commit history

Publish 0.2.1

Ray ·6a10c5b0d9 · ·parent d80a66b
4 files changed +756−11
package.json+223−4
@@ -1,6 +1,6 @@ {   "slug": "rs574xtss20",-  "version": "0.2.0",+  "version": "0.2.1",   "type": "component",   "description": "Jiangsu RUNIC Tech Flip Flops, TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "tags": [@@ -20,10 +20,229 @@     "rs574xtss20.kicad_mod",     "rs574xtss20.glb",     "rs574xtss20.step",+    "rs574xtss20-etched.step",     "rs574xtss20.lbr",     "docs/hero.png",     "docs/rs574xtss20-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"-  ]-}\ No newline at end of file+    "viewers/footprint.html",+    "rs574xtss20-hero.glb",+    "rs574xtss20-hero.overlay.json"+  ],+  "component": {+    "mpn": "RS574XTSS20",+    "manufacturer": "Jiangsu RUNIC Tech",+    "package": "TSSOP-20",+    "pin_count": 20,+    "category": "Logic",+    "subcategory": "Flip Flops",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2401261512_Jiangsu-RUNIC-Tech-RS574XTSS20_C20611902.pdf",+    "parts": {+      "symbol": "rs574xtss20.kicad_sym",+      "footprint": "rs574xtss20.kicad_mod",+      "model_3d": "rs574xtss20-hero.glb",+      "model_3d_plain": "rs574xtss20.glb",+      "model_3d_step": "rs574xtss20-etched.step",+      "model_3d_step_plain": "rs574xtss20.step",+      "lbr": "rs574xtss20.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "OE",+        "type": "input",+        "description": "Active-low 3-state output enable. When low, the eight Q outputs drive the stored flip-flop values; when high, all Q outputs enter the high-impedance state. Does not affect the internal flip-flop state."+      },+      {+        "number": "2",+        "name": "D0",+        "type": "input",+        "description": "Data input to flip-flop 0; captured to Q0 on the rising edge of CLK. CMOS-compatible logic input over the full 2 V to 5.5 V VCC range."+      },+      {+        "number": "3",+        "name": "D1",+        "type": "input",+        "description": "Data input to flip-flop 1; captured to Q1 on the rising edge of CLK."+      },+      {+        "number": "4",+        "name": "D2",+        "type": "input",+        "description": "Data input to flip-flop 2; captured to Q2 on the rising edge of CLK."+      },+      {+        "number": "5",+        "name": "D3",+        "type": "input",+        "description": "Data input to flip-flop 3; captured to Q3 on the rising edge of CLK."+      },+      {+        "number": "6",+        "name": "D4",+        "type": "input",+        "description": "Data input to flip-flop 4; captured to Q4 on the rising edge of CLK."+      },+      {+        "number": "7",+        "name": "D5",+        "type": "input",+        "description": "Data input to flip-flop 5; captured to Q5 on the rising edge of CLK."+      },+      {+        "number": "8",+        "name": "D6",+        "type": "input",+        "description": "Data input to flip-flop 6; captured to Q6 on the rising edge of CLK."+      },+      {+        "number": "9",+        "name": "D7",+        "type": "input",+        "description": "Data input to flip-flop 7; captured to Q7 on the rising edge of CLK."+      },+      {+        "number": "10",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground reference. Tie to system ground."+      },+      {+        "number": "11",+        "name": "CLK",+        "type": "input",+        "description": "Clock input common to all eight flip-flops. Data on D0-D7 is latched on the low-to-high (rising) transition of CLK, subject to the tsu / th setup and hold requirements."+      },+      {+        "number": "12",+        "name": "Q7",+        "type": "tri_state",+        "description": "3-state data output for flip-flop 7. Drives the latched D7 value when OE is low; high-impedance when OE is high. Rated ±16 mA output drive at VCC = 4.5 V."+      },+      {+        "number": "13",+        "name": "Q6",+        "type": "tri_state",+        "description": "3-state data output for flip-flop 6. Drives the latched D6 value when OE is low; high-impedance when OE is high."+      },+      {+        "number": "14",+        "name": "Q5",+        "type": "tri_state",+        "description": "3-state data output for flip-flop 5. Drives the latched D5 value when OE is low; high-impedance when OE is high."+      },+      {+        "number": "15",+        "name": "Q4",+        "type": "tri_state",+        "description": "3-state data output for flip-flop 4. Drives the latched D4 value when OE is low; high-impedance when OE is high."+      },+      {+        "number": "16",+        "name": "Q3",+        "type": "tri_state",+        "description": "3-state data output for flip-flop 3. Drives the latched D3 value when OE is low; high-impedance when OE is high."+      },+      {+        "number": "17",+        "name": "Q2",+        "type": "tri_state",+        "description": "3-state data output for flip-flop 2. Drives the latched D2 value when OE is low; high-impedance when OE is high."+      },+      {+        "number": "18",+        "name": "Q1",+        "type": "tri_state",+        "description": "3-state data output for flip-flop 1. Drives the latched D1 value when OE is low; high-impedance when OE is high."+      },+      {+        "number": "19",+        "name": "Q0",+        "type": "tri_state",+        "description": "3-state data output for flip-flop 0. Drives the latched D0 value when OE is low; high-impedance when OE is high."+      },+      {+        "number": "20",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply voltage, 2 V to 5.5 V (absolute max 6.5 V). Bypass locally with a 0.1 µF ceramic capacitor to GND."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2401261512_Jiangsu-RUNIC-Tech-RS574XTSS20_C20611902.pdf",+        "pages": 18,+        "sha256": "1b3d3a352669147f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 20,+        "described": 20,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    },+    "models_3d": [+      {+        "file": "rs574xtss20.step",+        "role": "plain",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          6.5,+          1.2+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "97339947f3a7196470ec2f1d9f9b92bb2fc2ab66ad53be0cf105192585ef3c9a",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      },+      {+        "file": "rs574xtss20-etched.step",+        "role": "eda",+        "up": "Z",+        "units": "mm",+        "origin": "footprint origin = pad-pattern centre",+        "seat": "z = 0",+        "extents_mm": [+          6.4,+          6.5,+          1.2+        ],+        "zmin_mm": 0,+        "centre_offset_mm": 0,+        "footprint_binding": "identity",+        "sha256": "55036538debbe351348be3386175e51c67ad6a9d91f099dc42fda1d1c4e0afaf",+        "checked": "2026-10-07",+        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+      }+    ]+  },+  "title": "RS574XTSS20",+  "brief": "Jiangsu RUNIC Tech Flip Flops, TSSOP-20. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+  "metadata": {+    "specs": {+      "Manufacturer": "Jiangsu RUNIC Tech",+      "Package": "TSSOP-20",+      "Category": "Logic",+      "Pins": "20"+    }+  },+  "discovery_triggers": [+    "rs574xtss20"+  ],+  "discovery_pitch": "RS574XTSS20 (Jiangsu RUNIC Tech) component page with datasheet-verified CAD.",+  "visibility": "public"+}
page.json+9−7
@@ -4,7 +4,7 @@   "slug": "rs574xtss20",   "title": "RS574XTSS20",   "brief": "Jiangsu RUNIC Tech Flip Flops, TSSOP-20. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.2.0",+  "version": "0.2.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -251,11 +251,11 @@     "docs/hero.png",     "docs/rs574xtss20-datasheet.pdf",     "viewers/symbol.html",-    "viewers/footprint.html"+    "viewers/footprint.html",+    "rs574xtss20-hero.glb",+    "rs574xtss20-hero.overlay.json"   ],-  "visibility": {-    "public": true-  },+  "visibility": "public",   "variants": [     {       "mpn": "RS574XTSS20",@@ -266,5 +266,7 @@       "kind": "packaging"     }   ],-  "updated_at": "2026-09-25T05:04:30.479Z"-}+  "updated_at": "2026-09-25T05:04:30.479Z",+  "description": "Jiangsu RUNIC Tech Flip Flops, TSSOP-20. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "org": "adom"+}\ No newline at end of file
rs574xtss20-hero.glbadded
⋯ 1 unchanged line ⋯
rs574xtss20-hero.overlay.jsonadded+524
@@ -0,0 +1,524 @@+{+  "spec": "adom-hero 1.4",+  "mpn": "RS574XTSS20",+  "kind": "component + footprint reference art",+  "board_use": false,+  "plane_z_mm": -0.02,+  "units": "metre",+  "upAxis": "Z",+  "layers": {+    "pad_outlines": {+      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+      "rgba": [+        0.0,+        0.902,+        0.863,+        0.5+      ],+      "pads": 20,+      "span_mm": 7.2,+      "dash_mm": 0.18,+      "gap_mm": 0.108,+      "pad_stroke_mm": 0.0432+    },+    "silkscreen": {+      "material": "Silkscreen reference lines - 30 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.3+      ],+      "footprint_items": 3,+      "pin1": {+        "source": "footprint silkscreen",+        "pad": "1"+      }+    },+    "signal_names": {+      "material": "Signal names - 50 percent opacity",+      "rgba": [+        0.92,+        0.96,+        1.0,+        0.5+      ],+      "font": "DejaVu Sans Mono",+      "labels": 20,+      "sides": "top + mirrored underside (single-sided)",+      "fallback_to_pad_number": 0+    }+  },+  "align": {+    "ok": true,+    "centre_offset_mm": 0.0,+    "tolerance_mm": 0.576,+    "orientation_flipped": false,+    "contacts_bbox_mm": [+      -3.2,+      3.2,+      -3.055,+      3.055+    ],+    "pads_bbox_mm": [+      -3.6,+      3.6,+      -3.125,+      3.125+    ],+    "seating_z_mm": 0.0+  },+  "sources": {+    "glb": "rs574xtss20-etched.glb",+    "glb_sha256": "d08ce5144ec8ea6e904b98b02f8e1b49d830038cf4f6664bb293d4acf9205f2f",+    "footprint": "rs574xtss20.kicad_mod",+    "footprint_sha256": "b7ca3a31dd45c1225609f9b94e8ba1534bd16edd193628c8d67a8ea669b26b72",+    "pins": "page.json component.pins",+    "pins_sha256": "690ab424fa0c72ef64e803946cfb247d433585bf7e31b61c504041fa2b83cc29"+  },+  "generator": "adom-wiki 1.8.31 (component_hero)",+  "labels": [+    {+      "pad": "1",+      "text": "OE",+      "x": -4.29,+      "y": -2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "2",+      "text": "D0",+      "x": -3.7,+      "y": -2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "3",+      "text": "D1",+      "x": -3.7,+      "y": -1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "4",+      "text": "D2",+      "x": -3.7,+      "y": -0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "5",+      "text": "D3",+      "x": -3.7,+      "y": -0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "6",+      "text": "D4",+      "x": -3.7,+      "y": 0.325,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "7",+      "text": "D5",+      "x": -3.7,+      "y": 0.975,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "8",+      "text": "D6",+      "x": -3.7,+      "y": 1.625,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "9",+      "text": "D7",+      "x": -3.7,+      "y": 2.275,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "10",+      "text": "GND",+      "x": -3.7,+      "y": 2.925,+      "align": "right",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "11",+      "text": "CLK",+      "x": 3.7,+      "y": 2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "12",+      "text": "Q7",+      "x": 3.7,+      "y": 2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "13",+      "text": "Q6",+      "x": 3.7,+      "y": 1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "14",+      "text": "Q5",+      "x": 3.7,+      "y": 0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "15",+      "text": "Q4",+      "x": 3.7,+      "y": 0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "16",+      "text": "Q3",+      "x": 3.7,+      "y": -0.325,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "17",+      "text": "Q2",+      "x": 3.7,+      "y": -0.975,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "18",+      "text": "Q1",+      "x": 3.7,+      "y": -1.625,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "19",+      "text": "Q0",+      "x": 3.7,+      "y": -2.275,+      "align": "left",+      "vertical": false,+      "h": 0.325+    },+    {+      "pad": "20",+      "text": "VCC",+      "x": 3.7,+      "y": -2.925,+      "align": "left",+      "vertical": false,+      "h": 0.325+    }+  ],+  "pads": [+    {+      "number": "1",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "2",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "3",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "4",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "5",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "6",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "7",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "8",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "9",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "10",+      "shape": "roundrect",+      "center_mm": [+        -2.8625,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "11",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "12",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "13",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "14",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "15",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "16",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -0.325+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "17",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -0.975+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "18",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -1.625+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "19",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -2.275+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    },+    {+      "number": "20",+      "shape": "roundrect",+      "center_mm": [+        2.8625,+        -2.925+      ],+      "size_mm": [+        1.475,+        0.4+      ],+      "rot": 0.0+    }+  ]+}