RS3236-3.3YF5

@@ -26,37 +26,39 @@       "model_3d_step": "rs3236-3-3yf5.step",       "lbr": "rs3236-3-3yf5.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C379349"+    },     "pins": [       {         "number": "1",         "name": "IN",         "type": "power_in",-        "description": "Regulator input supply. Accepts 1.7 V to 7.5 V (absolute max 8 V). Bypass to GND with a 1 µF ceramic capacitor placed close to the pin."+        "description": "Regulator input supply. Accepts 1.7 V to 7.5 V (absolute max 8 V). Bypass to GND with a 1 \u00b5F ceramic capacitor placed close to the pin."       },       {         "number": "2",         "name": "GND",         "type": "power_in",-        "description": "Device ground reference. All voltages are referenced to this pin. Typical ground pin current is 15 µA (20 µA max) at no load."+        "description": "Device ground reference. All voltages are referenced to this pin. Typical ground pin current is 15 \u00b5A (20 \u00b5A max) at no load."       },       {         "number": "3",         "name": "EN",         "type": "input",-        "description": "Enable input. Driving EN logic low (<0.4 V at VIN=1.7 V, <0.8 V at VIN=7.5 V) shuts the regulator down and reduces supply current to ~10 nA. VIH ≥1.4 V at VIN=1.7 V (≥2.3 V at VIN=7.5 V) enables the regulator. Tie to IN for always-on operation. Do not float."+        "description": "Enable input. Driving EN logic low (<0.4 V at VIN=1.7 V, <0.8 V at VIN=7.5 V) shuts the regulator down and reduces supply current to ~10 nA. VIH \u22651.4 V at VIN=1.7 V (\u22652.3 V at VIN=7.5 V) enables the regulator. Tie to IN for always-on operation. Do not float."       },       {         "number": "4",         "name": "BP",         "type": "passive",-        "description": "Reference-noise bypass pin (fixed-voltage version). Connect a low-leakage 0.01 µF ceramic capacitor from BP to GND, placed very close to the pin, to reduce output noise and improve PSRR. Leave open if bypass is not desired."+        "description": "Reference-noise bypass pin (fixed-voltage version). Connect a low-leakage 0.01 \u00b5F ceramic capacitor from BP to GND, placed very close to the pin, to reduce output noise and improve PSRR. Leave open if bypass is not desired."       },       {         "number": "5",         "name": "OUT",         "type": "power_out",-        "description": "Regulated 3.3 V output, up to 500 mA (current limit typ. 800 mA with foldback). Requires a 1 µF ceramic output capacitor to GND for stability. Load regulation ~20 mV (IOUT 0.1 mA to 300 mA)."+        "description": "Regulated 3.3 V output, up to 500 mA (current limit typ. 800 mA with foldback). Requires a 1 \u00b5F ceramic output capacitor to GND for stability. Load regulation ~20 mV (IOUT 0.1 mA to 300 mA)."       }     ],     "provenance": {

@@ -59,6 +59,18 @@   <smd name="3" x="-1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/>   <smd name="4" x="1.1375" y="-0.9500" dx="1.3250" dy="0.6000" layer="1"/>   <smd name="5" x="1.1375" y="0.9500" dx="1.3250" dy="0.6000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-1.4500" y="1.5100"/>+    <vertex x="-1.6900" y="1.8400"/>+    <vertex x="-1.2100" y="1.8400"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-0.4000" y="1.4500"/>+    <vertex x="0.8000" y="1.4500"/>+    <vertex x="0.8000" y="-1.4500"/>+    <vertex x="-0.8000" y="-1.4500"/>+    <vertex x="-0.8000" y="1.0500"/>+  </polygon>   <wire x1="-0.9100" y1="1.5600" x2="0.9100" y2="1.5600" width="0.1200" layer="21"/>   <wire x1="-0.9100" y1="1.5100" x2="-0.9100" y2="1.5600" width="0.1200" layer="21"/>   <wire x1="-0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5100" width="0.1200" layer="21"/>@@ -68,7 +80,7 @@   <wire x1="0.9100" y1="-1.5600" x2="-0.9100" y2="-1.5600" width="0.1200" layer="21"/>   <text x="0" y="2.212" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-2.212" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.4500" y="1.5100"/><vertex x="-1.6900" y="1.8400"/><vertex x="-1.2100" y="1.8400"/></polygon></package>+</package> </packages> <symbols> <symbol name="RS3236-3.3YF5">@@ -100,7 +112,13 @@         <connect gate="G$1" pin="OUT" pad="5"/>         <connect gate="G$1" pin="BP" pad="4"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="RS3236-3.3YF5" constant="no"/>+          <attribute name="MANUFACTURER" value="Jiangsu RUNIC Tech RS3236 3 3YF5" constant="no"/>+          <attribute name="LCSC_PN" value="C379349" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>