component
RS3236-3.3YF5
Public Made by Adomby adom
Jiangsu RUNIC Tech RS3236 3 3YF5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.
← Commit history
page.json+9−6@@ -32,31 +32,31 @@ "number": "1", "name": "IN", "type": "power_in",- "description": "Regulator input supply. Accepts 1.7 V to 7.5 V (absolute max 8 V). Bypass to GND with a 1 \u00b5F ceramic capacitor placed close to the pin."+ "description": "Regulator input supply. Accepts 1.7 V to 7.5 V (absolute max 8 V). Bypass to GND with a 1 µF ceramic capacitor placed close to the pin." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Device ground reference. All voltages are referenced to this pin. Typical ground pin current is 15 \u00b5A (20 \u00b5A max) at no load."+ "description": "Device ground reference. All voltages are referenced to this pin. Typical ground pin current is 15 µA (20 µA max) at no load." }, { "number": "3", "name": "EN", "type": "input",- "description": "Enable input. Driving EN logic low (<0.4 V at VIN=1.7 V, <0.8 V at VIN=7.5 V) shuts the regulator down and reduces supply current to ~10 nA. VIH \u22651.4 V at VIN=1.7 V (\u22652.3 V at VIN=7.5 V) enables the regulator. Tie to IN for always-on operation. Do not float."+ "description": "Enable input. Driving EN logic low (<0.4 V at VIN=1.7 V, <0.8 V at VIN=7.5 V) shuts the regulator down and reduces supply current to ~10 nA. VIH ≥1.4 V at VIN=1.7 V (≥2.3 V at VIN=7.5 V) enables the regulator. Tie to IN for always-on operation. Do not float." }, { "number": "4", "name": "BP", "type": "passive",- "description": "Reference-noise bypass pin (fixed-voltage version). Connect a low-leakage 0.01 \u00b5F ceramic capacitor from BP to GND, placed very close to the pin, to reduce output noise and improve PSRR. Leave open if bypass is not desired."+ "description": "Reference-noise bypass pin (fixed-voltage version). Connect a low-leakage 0.01 µF ceramic capacitor from BP to GND, placed very close to the pin, to reduce output noise and improve PSRR. Leave open if bypass is not desired." }, { "number": "5", "name": "OUT", "type": "power_out",- "description": "Regulated 3.3 V output, up to 500 mA (current limit typ. 800 mA with foldback). Requires a 1 \u00b5F ceramic output capacitor to GND for stability. Load regulation ~20 mV (IOUT 0.1 mA to 300 mA)."+ "description": "Regulated 3.3 V output, up to 500 mA (current limit typ. 800 mA with foldback). Requires a 1 µF ceramic output capacitor to GND for stability. Load regulation ~20 mV (IOUT 0.1 mA to 300 mA)." } ], "provenance": {@@ -120,5 +120,8 @@ "docs/rs3236-3-3yf5-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }