rs2254xq

@@ -33,5 +33,114 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "RS2254XQ",+    "manufacturer": "Jiangsu RUNIC Tech",+    "package": "TSSOP-14",+    "pin_count": 14,+    "category": "Analog Switches, Multiplexers",+    "parts": {+      "symbol": "rs2254xq.kicad_sym",+      "footprint": "rs2254xq.kicad_mod",+      "model_3d": "rs2254xq-etched.glb",+      "model_3d_plain": "rs2254xq.glb",+      "model_3d_step": "rs2254xq-etched.step",+      "model_3d_step_plain": "rs2254xq.step",+      "lbr": "rs2254xq.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "A IN/OUT",+        "type": "bidirectional",+        "description": "Switch A analog signal terminal (in/out). Bidirectional analog pass connection to pin 2 when Switch A control (pin 13) is HIGH. Signal range GND to VCC; RON ≈ 24 Ω typ at VCC=5 V."+      },+      {+        "number": "2",+        "name": "A OUT/IN",+        "type": "bidirectional",+        "description": "Switch A analog signal terminal (out/in). Bidirectional analog pass connection to pin 1 when Switch A control (pin 13) is HIGH."+      },+      {+        "number": "3",+        "name": "B OUT/IN",+        "type": "bidirectional",+        "description": "Switch B analog signal terminal (out/in). Bidirectional analog pass connection to pin 4 when Switch B control (pin 5) is HIGH."+      },+      {+        "number": "4",+        "name": "B IN/OUT",+        "type": "bidirectional",+        "description": "Switch B analog signal terminal (in/out). Bidirectional analog pass connection to pin 3 when Switch B control (pin 5) is HIGH."+      },+      {+        "number": "5",+        "name": "B",+        "type": "input",+        "description": "Digital control input for Switch B. HIGH (VIH ≥ 1.7 V) turns Switch B ON; LOW (VIL ≤ 0.5 V) turns it OFF. Must not be left floating - tie to VCC or GND when unused."+      },+      {+        "number": "6",+        "name": "C",+        "type": "input",+        "description": "Digital control input for Switch C. HIGH turns Switch C ON; LOW turns it OFF. VIH ≥ 1.7 V, VIL ≤ 0.5 V. Must not be left floating."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground / negative supply reference. Sets the lower analog signal-range limit for all four switches."+      },+      {+        "number": "8",+        "name": "C IN/OUT",+        "type": "bidirectional",+        "description": "Switch C analog signal terminal (in/out). Bidirectional analog pass connection to pin 9 when Switch C control (pin 6) is HIGH."+      },+      {+        "number": "9",+        "name": "C OUT/IN",+        "type": "bidirectional",+        "description": "Switch C analog signal terminal (out/in). Bidirectional analog pass connection to pin 8 when Switch C control (pin 6) is HIGH."+      },+      {+        "number": "10",+        "name": "D OUT/IN",+        "type": "bidirectional",+        "description": "Switch D analog signal terminal (out/in). Bidirectional analog pass connection to pin 11 when Switch D control (pin 12) is HIGH."+      },+      {+        "number": "11",+        "name": "D IN/OUT",+        "type": "bidirectional",+        "description": "Switch D analog signal terminal (in/out). Bidirectional analog pass connection to pin 10 when Switch D control (pin 12) is HIGH."+      },+      {+        "number": "12",+        "name": "D",+        "type": "input",+        "description": "Digital control input for Switch D. HIGH turns Switch D ON; LOW turns it OFF. VIH ≥ 1.7 V, VIL ≤ 0.5 V. Must not be left floating."+      },+      {+        "number": "13",+        "name": "A",+        "type": "input",+        "description": "Digital control input for Switch A. HIGH turns Switch A ON; LOW turns it OFF. VIH ≥ 1.7 V, VIL ≤ 0.5 V. Must not be left floating."+      },+      {+        "number": "14",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply input. Recommended operating range 2.5 V to 5.5 V; absolute maximum 6 V. Bypass locally to GND (pin 7); sets the upper analog signal-range limit."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}