← Commit history

rs1g04xf5: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·9b0cc47574 · ·parent 9d1fb24
1 file changed +56−1
page.json+56−1
@@ -33,5 +33,60 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "RS1G04XF5",+    "manufacturer": "Jiangsu RUNIC Tech",+    "package": "SOT23-5L",+    "pin_count": 5,+    "category": "Inverters",+    "parts": {+      "symbol": "rs1g04xf5.kicad_sym",+      "footprint": "rs1g04xf5.kicad_mod",+      "model_3d": "rs1g04xf5-etched.glb",+      "model_3d_plain": "rs1g04xf5.glb",+      "model_3d_step": "rs1g04xf5-etched.step",+      "model_3d_step_plain": "rs1g04xf5.step",+      "lbr": "rs1g04xf5.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "N.C.",+        "type": "unconnected",+        "description": "Not connected - no internal die bond. Datasheet recommends tying this pin to GND for use as a heat-spreading plane, but leaving it floating is electrically acceptable."+      },+      {+        "number": "2",+        "name": "A",+        "type": "input",+        "description": "Logic input to the inverter gate. CMOS-compatible; VIH = 0.65×VCC to 0.7×VCC and VIL = 0.35×VCC to 0.3×VCC depending on supply. Input is 5.5 V-tolerant regardless of VCC (Ioff / partial-power-down support)."+      },+      {+        "number": "3",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / negative supply return for the device."+      },+      {+        "number": "4",+        "name": "Y",+        "type": "output",+        "description": "Inverted logic output (Y = A̅). Push-pull CMOS output rated for high drive: typ ±24 mA at VCC = 3.0 V and up to ±32 mA at VCC = 4.5 V. VOH ≥ VCC − 0.1 V and VOL ≤ 0.1 V at IO = 100 µA."+      },+      {+        "number": "5",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply input. Operating range 1.65 V to 5.5 V (1.5 V minimum for data retention only). Absolute max 6.5 V. Recommended decoupling with a 0.1 µF cap to GND close to the pin."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}