← Commit history
package.json+127−4@@ -1,6 +1,6 @@ { "slug": "rs1g04xf5",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Jiangsu RUNIC Tech Inverters, SOT23-5L. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,129 @@ "docs/hero.png", "docs/rs1g04xf5-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "rs1g04xf5-etched.step",+ "rs1g04xf5-etched.glb"+ ],+ "component": {+ "mpn": "RS1G04XF5",+ "manufacturer": "Jiangsu RUNIC Tech",+ "package": "SOT23-5L",+ "pin_count": 5,+ "category": "Inverters",+ "parts": {+ "symbol": "rs1g04xf5.kicad_sym",+ "footprint": "rs1g04xf5.kicad_mod",+ "model_3d": "rs1g04xf5-etched.glb",+ "model_3d_plain": "rs1g04xf5.glb",+ "model_3d_step": "rs1g04xf5-etched.step",+ "model_3d_step_plain": "rs1g04xf5.step",+ "lbr": "rs1g04xf5.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "N.C.",+ "type": "unconnected",+ "description": "Not connected - no internal die bond. Datasheet recommends tying this pin to GND for use as a heat-spreading plane, but leaving it floating is electrically acceptable."+ },+ {+ "number": "2",+ "name": "A",+ "type": "input",+ "description": "Logic input to the inverter gate. CMOS-compatible; VIH = 0.65×VCC to 0.7×VCC and VIL = 0.35×VCC to 0.3×VCC depending on supply. Input is 5.5 V-tolerant regardless of VCC (Ioff / partial-power-down support)."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Ground / negative supply return for the device."+ },+ {+ "number": "4",+ "name": "Y",+ "type": "output",+ "description": "Inverted logic output (Y = A̅). Push-pull CMOS output rated for high drive: typ ±24 mA at VCC = 3.0 V and up to ±32 mA at VCC = 4.5 V. VOH ≥ VCC − 0.1 V and VOL ≤ 0.1 V at IO = 100 µA."+ },+ {+ "number": "5",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply input. Operating range 1.65 V to 5.5 V (1.5 V minimum for data retention only). Absolute max 6.5 V. Recommended decoupling with a 0.1 µF cap to GND close to the pin."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C5372438",+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:15:06Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "rs1g04xf5.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "rs1g04xf5-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "43f9f97498a507325530ef96a0db3428a0025a4aaa4439324c0560c230222df1",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "rs1g04xf5",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Jiangsu RUNIC Tech Inverters, SOT23-5L. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/rs1g04xf5-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "rs1g04xf5-etched.step"+ "rs1g04xf5-etched.step",+ "rs1g04xf5-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -152,5 +151,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}