← Commit history
rs0302yh8: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "RS0302YH8",+ "manufacturer": "Jiangsu RUNIC Tech",+ "package": "SOT23-8",+ "pin_count": 8,+ "category": "Translators / Level Shifters",+ "parts": {+ "symbol": "rs0302yh8.kicad_sym",+ "footprint": "rs0302yh8.kicad_mod",+ "model_3d": "rs0302yh8-etched.glb",+ "model_3d_plain": "rs0302yh8.glb",+ "model_3d_step": "rs0302yh8-etched.step",+ "model_3d_step_plain": "rs0302yh8.step",+ "lbr": "rs0302yh8.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference for the device."+ },+ {+ "number": "2",+ "name": "VREF1",+ "type": "power_in",+ "description": "Low-voltage-side reference supply voltage for SCL1 and SDA1. Operating range 1.0V to VREF2-0.6V (recommended 0V to 5.5V, absolute max 7V). Sets the low-side I2C bus voltage."+ },+ {+ "number": "3",+ "name": "SCL1",+ "type": "bidirectional",+ "description": "Serial clock, low-voltage side. Open-drain I2C I/O referenced to VREF1; high-impedance when EN=Low. 5V tolerant."+ },+ {+ "number": "4",+ "name": "SDA1",+ "type": "bidirectional",+ "description": "Serial data, low-voltage side. Open-drain I2C I/O referenced to VREF1; high-impedance when EN=Low. 5V tolerant."+ },+ {+ "number": "5",+ "name": "SDA2",+ "type": "bidirectional",+ "description": "Serial data, high-voltage side. Open-drain I2C I/O referenced to VREF2; high-impedance when EN=Low. 5V tolerant."+ },+ {+ "number": "6",+ "name": "SCL2",+ "type": "bidirectional",+ "description": "Serial clock, high-voltage side. Open-drain I2C I/O referenced to VREF2; high-impedance when EN=Low. 5V tolerant."+ },+ {+ "number": "7",+ "name": "VREF2",+ "type": "power_in",+ "description": "High-voltage-side reference supply voltage for SCL2 and SDA2. Must be between VREF1+0.6V and 5.5V (absolute max 7V). Sets the high-side I2C bus voltage."+ },+ {+ "number": "8",+ "name": "EN",+ "type": "input",+ "description": "Switch enable input (0V to 5.5V). When HIGH the translator switches conduct (SCL1↔SCL2 and SDA1↔SDA2 connected); when LOW the switches are OFF and ports are high-impedance/isolated. Switch conducts if EN is ≥0.6V higher than SCL/SDA line."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}