← Commit history
rs0202xm: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "RS0202XM",+ "manufacturer": "Jiangsu RUNIC Tech",+ "package": "MSOP-8",+ "pin_count": 8,+ "category": "Translators / Level Shifters",+ "parts": {+ "symbol": "rs0202xm.kicad_sym",+ "footprint": "rs0202xm.kicad_mod",+ "model_3d": "rs0202xm-etched.glb",+ "model_3d_plain": "rs0202xm.glb",+ "model_3d_step": "rs0202xm-etched.step",+ "model_3d_step_plain": "rs0202xm.step",+ "lbr": "rs0202xm.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "B2",+ "type": "bidirectional",+ "description": "Input/output B2 on the B (higher-voltage) port. Referenced to VCCB (1.65 V to 5.5 V). Bidirectional level-translated data line paired with A2; direction is auto-sensed by the internal one-shot logic."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground return for both supply rails."+ },+ {+ "number": "3",+ "name": "VCCA",+ "type": "power_in",+ "description": "A-port supply voltage, 1.2 V <= VCCA <= 3.6 V and VCCA <= VCCB. Sets the logic levels for the A-side I/Os (A1, A2) and the OE input threshold. Absolute max 4.6 V."+ },+ {+ "number": "4",+ "name": "A2",+ "type": "bidirectional",+ "description": "Input/output A2 on the A (lower-voltage) port. Referenced to VCCA (1.2 V to 3.6 V). Bidirectional level-translated data line paired with B2; disabled to Hi-Z when OE is low."+ },+ {+ "number": "5",+ "name": "A1",+ "type": "bidirectional",+ "description": "Input/output A1 on the A (lower-voltage) port. Referenced to VCCA (1.2 V to 3.6 V). Bidirectional level-translated data line paired with B1; disabled to Hi-Z when OE is low."+ },+ {+ "number": "6",+ "name": "OE",+ "type": "input",+ "description": "Output Enable (active high), referenced to VCCA. VIH >= 0.65*VCCA enables translation on both channels; pulling OE low (VIL <= 0.35*VCCA) forces all A- and B-port I/Os into the high-impedance 3-state. Tie to GND through a pull-down resistor to guarantee Hi-Z during power-up/down. Absolute max 4.6 V, VIH can be driven up to 5.5 V."+ },+ {+ "number": "7",+ "name": "VCCB",+ "type": "power_in",+ "description": "B-port supply voltage, 1.65 V <= VCCB <= 5.5 V. Sets the logic levels for the B-side I/Os (B1, B2). Must satisfy VCCB >= VCCA. Absolute max 6.5 V. No power-supply sequencing required; either VCC rail may ramp first, and if either VCC is at GND both ports are forced Hi-Z (VCC isolation)."+ },+ {+ "number": "8",+ "name": "B1",+ "type": "bidirectional",+ "description": "Input/output B1 on the B (higher-voltage) port. Referenced to VCCB (1.65 V to 5.5 V). Bidirectional level-translated data line paired with A1; direction is auto-sensed by the internal one-shot logic."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}