component

RP2350A

Public Made by Adom

by adom

Raspberry Pi Microcontrollers, QFN-60-EP(7x7). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet.

componentembedded processors & controllersrp2350aboard-derived

Verified RP2350A

by Claude, at Ray Kholodovsky's request · last 27 Oct 2026 · 1 record · files match
SymbolFootprint3D modelPins

Verification log 5 records

27 Oct 2026Claude, at Ray Kholodovsky's requestValidated against Raspberry Pi's RP2350 datasheet (build of 2026-10-01)files match
SymbolFootprint3D modelPinsfor all variants
  • ✓All 61 pins match the datasheet pin table (section 14.8) by number and name; pin 25 renamed SWD -> SWDIO to the datasheet's spelling
  • •Pin 1 is IOVDD per the QFN-60 pinout figure and Raspberry Pi's KiCad symbol; the pin table lists 54 under both IOVDD and QSPI_IOVDD and omits 1, a typo in the table
  • ✓Pin 24 SWCLK typed as an input (Digital In (FT)); it was an output
  • ✓Footprint vs package drawing (Figure 147): 60 pads at e = 0.400 mm, pad 0.2 x 0.8 mm over b = 0.18 and L = 0.40 mm terminals, exposed pad 3.4 x 3.4 mm (D2/E2 = 3.40), pin 1 top-left
  • ✓3D body 7.0 x 7.0 x 0.9 mm (D/E = 7 BSC, A max 0.90), Z-up, seated on z = 0, centred on the pads
  • ✓Symbol Datasheet / MPN / Manufacturer / DigiKey / Mouser / LCSC properties agree with page.json; footprint Datasheet property points at the manufacturer datasheet URL
  • ✓component-page-verify: all checks pass; adom-lbr validate OK
Evidencedatasheet (Raspberry Pi)
Verified files✓ rp2350a.kicad_sym✓ rp2350a.kicad_mod✓ rp2350a.step
9 Oct 2026Claude (AI build)Datasheet pins not matched to a symbol pin: SWDIOsuperseded
reviewfor all variants
  • •Datasheet pins not matched to a symbol pin: SWDIO
9 Oct 2026Claude (AI build)Pin names differ between the board symbol and the datasheet (often equivalent naming; chec...superseded
reviewfor all variants
  • •Pin names differ between the board symbol and the datasheet (often equivalent naming; check): 25: symbol "SWD" vs datasheet "SWDIO"
9 Oct 2026Claude (AI build)1 of 61 pins have no datasheet description yet (pins 25).superseded
reviewfor all variants
  • •1 of 61 pins have no datasheet description yet (pins 25).
9 Oct 2026Claude (AI build)Automated build checks (awaiting human validation)superseded
SymbolFootprint3D modelPinsfor all variants
  • ✓Footprint extracted pad-for-pad from the source board and normalized to the footprint frame (back-side parts un-mirrored)
  • ✓3D model seated z=0 at footprint origin (placement inverse; method centroid-matched to KiCad library models on 59 cases)
  • ✓adom-lbr generate + lint passed
  • •60 of 61 pins described from the datasheet (adom-ds2sf, page-cited)
  • •Not yet checked by a person: land pattern vs datasheet, pin-1/orientation, 3D body vs drawing
Evidencedatasheet
Verified files! rp2350a.kicad_sym! rp2350a.kicad_mod✓ rp2350a.step
Spot something wrong? Report it as an issue Propose a fix Records are signed by members of adom.
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity
← Commit history

Add component CAD, datasheet and docs (2)

Caleb ·f174889aef ·20d ago ·parent 8120a15
2 files changed +301
docs/hero.pngrp2350a.lbr+301
docs/hero.pngadded
⋯ 1 unchanged line ⋯
rp2350a.lbradded+301
@@ -0,0 +1,301 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description>Raspberry Pi Microcontrollers, QFN-60-EP(7x7). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet</description>+<packages>+<package name="RP2350A">+  <description>62 pads, 7.7 x 7.7 mm. QFN, 60 Pin</description>+  <smd name="1" x="-3.4500" y="2.8000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="2" x="-3.4500" y="2.4000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="3" x="-3.4500" y="2.0000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="4" x="-3.4500" y="1.6000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="5" x="-3.4500" y="1.2000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="6" x="-3.4500" y="0.8000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="7" x="-3.4500" y="0.4000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="8" x="-3.4500" y="-0.0000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="9" x="-3.4500" y="-0.4000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="10" x="-3.4500" y="-0.8000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="11" x="-3.4500" y="-1.2000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="12" x="-3.4500" y="-1.6000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="13" x="-3.4500" y="-2.0000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="14" x="-3.4500" y="-2.4000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="15" x="-3.4500" y="-2.8000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="16" x="-2.8000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="17" x="-2.4000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="18" x="-2.0000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="19" x="-1.6000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="20" x="-1.2000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="21" x="-0.8000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="22" x="-0.4000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="23" x="0.0000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="24" x="0.4000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="25" x="0.8000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="26" x="1.2000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="27" x="1.6000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="28" x="2.0000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="29" x="2.4000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="30" x="2.8000" y="-3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="31" x="3.4500" y="-2.8000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="32" x="3.4500" y="-2.4000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="33" x="3.4500" y="-2.0000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="34" x="3.4500" y="-1.6000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="35" x="3.4500" y="-1.2000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="36" x="3.4500" y="-0.8000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="37" x="3.4500" y="-0.4000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="38" x="3.4500" y="-0.0000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="39" x="3.4500" y="0.4000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="40" x="3.4500" y="0.8000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="41" x="3.4500" y="1.2000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="42" x="3.4500" y="1.6000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="43" x="3.4500" y="2.0000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="44" x="3.4500" y="2.4000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="45" x="3.4500" y="2.8000" dx="0.8000" dy="0.2000" layer="1" roundness="50"/>+  <smd name="46" x="2.8000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="47" x="2.4000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="48" x="2.0000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="49" x="1.6000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="50" x="1.2000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="51" x="0.8000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="52" x="0.4000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="53" x="0.0000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="54" x="-0.4000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="55" x="-0.8000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="56" x="-1.2000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="57" x="-1.6000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="58" x="-2.0000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="59" x="-2.4000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="60" x="-2.8000" y="3.4500" dx="0.2000" dy="0.8000" layer="1" roundness="50"/>+  <smd name="61" x="0.0000" y="-0.0000" dx="3.4000" dy="3.4000" layer="1" cream="no"/>+  <smd name="61@2" x="0.0000" y="-0.0000" dx="3.4000" dy="3.4000" layer="1" cream="no" stop="no"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-4.1100" y="2.8000"/>+    <vertex x="-4.4400" y="2.5600"/>+    <vertex x="-4.4400" y="3.0400"/>+  </polygon>+  <polygon width="0.1000" layer="51">+    <vertex x="-2.5000" y="3.5000"/>+    <vertex x="3.5000" y="3.5000"/>+    <vertex x="3.5000" y="-3.5000"/>+    <vertex x="-3.5000" y="-3.5000"/>+    <vertex x="-3.5000" y="2.5000"/>+  </polygon>+  <wire x1="-3.6100" y1="3.6100" x2="-3.1600" y2="3.6100" width="0.1200" layer="21"/>+  <wire x1="-3.6100" y1="3.1600" x2="-3.6100" y2="3.6100" width="0.1200" layer="21"/>+  <wire x1="-3.6100" y1="-3.6100" x2="-3.6100" y2="-3.1600" width="0.1200" layer="21"/>+  <wire x1="-3.1600" y1="-3.6100" x2="-3.6100" y2="-3.6100" width="0.1200" layer="21"/>+  <wire x1="3.1600" y1="3.6100" x2="3.6100" y2="3.6100" width="0.1200" layer="21"/>+  <wire x1="3.6100" y1="3.6100" x2="3.6100" y2="3.1600" width="0.1200" layer="21"/>+  <wire x1="3.6100" y1="-3.1600" x2="3.6100" y2="-3.6100" width="0.1200" layer="21"/>+  <wire x1="3.6100" y1="-3.6100" x2="3.1600" y2="-3.6100" width="0.1200" layer="21"/>+  <text x="0" y="4.450" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-4.450" size="1.27" layer="27" align="top-center">&gt;VALUE</text>+</package>+</packages>+<symbols>+<symbol name="RP2350A">+  <description>Raspberry Pi Microcontrollers, QFN-60-EP(7x7). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet</description>+  <wire x1="-20.32" y1="58.42" x2="20.32" y2="58.42" width="0.254" layer="94"/>+  <wire x1="20.32" y1="58.42" x2="20.32" y2="-55.879999999999995" width="0.254" layer="94"/>+  <wire x1="20.32" y1="-55.879999999999995" x2="-20.32" y2="-55.879999999999995" width="0.254" layer="94"/>+  <wire x1="-20.32" y1="-55.879999999999995" x2="-20.32" y2="58.42" width="0.254" layer="94"/>+  <text x="0" y="60.96" size="1.27" layer="95" align="bottom-center">&gt;NAME</text>+  <text x="0" y="-58.419999999999995" size="1.27" layer="96" align="top-center">&gt;VALUE</text>+  <pin name="IOVDD" x="-25.4" y="27.94" length="middle" direction="pwr"/>+  <pin name="GPIO0" x="25.4" y="48.260000000000005" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO1" x="25.4" y="45.72" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO2" x="25.4" y="43.18000000000001" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO3" x="25.4" y="40.64" length="middle" direction="io" rot="R180"/>+  <pin name="DVDD" x="-25.4" y="40.64" length="middle" direction="pwr"/>+  <pin name="GPIO4" x="25.4" y="38.1" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO5" x="25.4" y="35.56" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO6" x="25.4" y="33.02" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO7" x="25.4" y="30.480000000000004" length="middle" direction="io" rot="R180"/>+  <pin name="IOVDD@2" x="-25.4" y="25.400000000000002" length="middle" direction="pwr"/>+  <pin name="GPIO8" x="25.4" y="27.94" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO9" x="25.4" y="25.400000000000002" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO10" x="25.4" y="22.86" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO11" x="25.4" y="20.32" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO12" x="25.4" y="17.78" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO13" x="25.4" y="15.240000000000002" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO14" x="25.4" y="12.700000000000003" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO15" x="25.4" y="10.160000000000004" length="middle" direction="io" rot="R180"/>+  <pin name="IOVDD@3" x="-25.4" y="22.86" length="middle" direction="pwr"/>+  <pin name="XIN" x="-25.4" y="53.34" length="middle" direction="in"/>+  <pin name="XOUT" x="-25.4" y="48.260000000000005" length="middle" direction="pas"/>+  <pin name="DVDD@2" x="-25.4" y="38.1" length="middle" direction="pwr"/>+  <pin name="SWCLK" x="25.4" y="53.34" length="middle" direction="out" rot="R180"/>+  <pin name="SWD" x="25.4" y="-48.26" length="middle" direction="io" rot="R180"/>+  <pin name="RUN" x="-25.4" y="55.88" length="middle" direction="in"/>+  <pin name="GPIO16" x="25.4" y="7.6200000000000045" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO17" x="25.4" y="5.080000000000005" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO18" x="25.4" y="2.539999999999999" length="middle" direction="io" rot="R180"/>+  <pin name="IOVDD@4" x="-25.4" y="20.32" length="middle" direction="pwr"/>+  <pin name="GPIO19" x="25.4" y="0" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO20" x="25.4" y="-2.539999999999999" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO21" x="25.4" y="-5.079999999999998" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO22" x="25.4" y="-7.619999999999997" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO23" x="25.4" y="-10.160000000000004" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO24" x="25.4" y="-12.699999999999996" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO25" x="25.4" y="-15.240000000000002" length="middle" direction="io" rot="R180"/>+  <pin name="IOVDD@5" x="-25.4" y="17.78" length="middle" direction="pwr"/>+  <pin name="DVDD@3" x="-25.4" y="35.56" length="middle" direction="pwr"/>+  <pin name="GPIO26_ADC0" x="25.4" y="-20.32" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO27_ADC1" x="25.4" y="-22.859999999999992" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO28_ADC2" x="25.4" y="-25.4" length="middle" direction="io" rot="R180"/>+  <pin name="GPIO29_ADC3" x="25.4" y="-27.940000000000005" length="middle" direction="io" rot="R180"/>+  <pin name="ADC_AVDD" x="-25.4" y="43.18000000000001" length="middle" direction="pwr"/>+  <pin name="IOVDD@6" x="-25.4" y="15.240000000000002" length="middle" direction="pwr"/>+  <pin name="VREG_AVDD" x="-25.4" y="5.080000000000005" length="middle" direction="pwr"/>+  <pin name="VREG_PGND" x="-25.4" y="-2.539999999999999" length="middle" direction="pwr"/>+  <pin name="VREG_LX" x="-25.4" y="0" length="middle" direction="out"/>+  <pin name="VREG_VIN" x="-25.4" y="-5.079999999999998" length="middle" direction="pwr"/>+  <pin name="VREG_FB" x="-25.4" y="2.539999999999999" length="middle" direction="in"/>+  <pin name="USB_DM" x="25.4" y="-50.800000000000004" length="middle" direction="io" rot="R180"/>+  <pin name="USB_DP" x="25.4" y="-53.339999999999996" length="middle" direction="io" rot="R180"/>+  <pin name="USB_OTP_VDD" x="-25.4" y="7.6200000000000045" length="middle" direction="pwr"/>+  <pin name="QSPI_IOVDD" x="-25.4" y="10.160000000000004" length="middle" direction="pwr"/>+  <pin name="QSPI_SD3" x="25.4" y="-40.63999999999999" length="middle" direction="io" rot="R180"/>+  <pin name="QSPI_SCLK" x="25.4" y="55.88" length="middle" direction="out" rot="R180"/>+  <pin name="QSPI_SD0" x="25.4" y="-33.02" length="middle" direction="io" rot="R180"/>+  <pin name="QSPI_SD2" x="25.4" y="-38.1" length="middle" direction="io" rot="R180"/>+  <pin name="QSPI_SD1" x="25.4" y="-35.559999999999995" length="middle" direction="io" rot="R180"/>+  <pin name="QSPI_SS" x="25.4" y="-45.71999999999999" length="middle" direction="io" rot="R180"/>+  <pin name="GND" x="-25.4" y="33.02" length="middle" direction="pwr"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="RP2350A" prefix="U">+  <description>Raspberry Pi Microcontrollers, QFN-60-EP(7x7). KiCad symbol, footprint and 3D as used on Adom boards; pin functions from the manufacturer datasheet</description>+  <gates>+    <gate name="G$1" symbol="RP2350A" x="0" y="0"/>+  </gates>+  <devices>+    <device name="" package="RP2350A">+      <connects>+        <connect gate="G$1" pin="IOVDD" pad="1"/>+        <connect gate="G$1" pin="GPIO0" pad="2"/>+        <connect gate="G$1" pin="GPIO1" pad="3"/>+        <connect gate="G$1" pin="GPIO2" pad="4"/>+        <connect gate="G$1" pin="GPIO3" pad="5"/>+        <connect gate="G$1" pin="DVDD" pad="6"/>+        <connect gate="G$1" pin="GPIO4" pad="7"/>+        <connect gate="G$1" pin="GPIO5" pad="8"/>+        <connect gate="G$1" pin="GPIO6" pad="9"/>+        <connect gate="G$1" pin="GPIO7" pad="10"/>+        <connect gate="G$1" pin="IOVDD@2" pad="11"/>+        <connect gate="G$1" pin="GPIO8" pad="12"/>+        <connect gate="G$1" pin="GPIO9" pad="13"/>+        <connect gate="G$1" pin="GPIO10" pad="14"/>+        <connect gate="G$1" pin="GPIO11" pad="15"/>+        <connect gate="G$1" pin="GPIO12" pad="16"/>+        <connect gate="G$1" pin="GPIO13" pad="17"/>+        <connect gate="G$1" pin="GPIO14" pad="18"/>+        <connect gate="G$1" pin="GPIO15" pad="19"/>+        <connect gate="G$1" pin="IOVDD@3" pad="20"/>+        <connect gate="G$1" pin="XIN" pad="21"/>+        <connect gate="G$1" pin="XOUT" pad="22"/>+        <connect gate="G$1" pin="DVDD@2" pad="23"/>+        <connect gate="G$1" pin="SWCLK" pad="24"/>+        <connect gate="G$1" pin="SWD" pad="25"/>+        <connect gate="G$1" pin="RUN" pad="26"/>+        <connect gate="G$1" pin="GPIO16" pad="27"/>+        <connect gate="G$1" pin="GPIO17" pad="28"/>+        <connect gate="G$1" pin="GPIO18" pad="29"/>+        <connect gate="G$1" pin="IOVDD@4" pad="30"/>+        <connect gate="G$1" pin="GPIO19" pad="31"/>+        <connect gate="G$1" pin="GPIO20" pad="32"/>+        <connect gate="G$1" pin="GPIO21" pad="33"/>+        <connect gate="G$1" pin="GPIO22" pad="34"/>+        <connect gate="G$1" pin="GPIO23" pad="35"/>+        <connect gate="G$1" pin="GPIO24" pad="36"/>+        <connect gate="G$1" pin="GPIO25" pad="37"/>+        <connect gate="G$1" pin="IOVDD@5" pad="38"/>+        <connect gate="G$1" pin="DVDD@3" pad="39"/>+        <connect gate="G$1" pin="GPIO26_ADC0" pad="40"/>+        <connect gate="G$1" pin="GPIO27_ADC1" pad="41"/>+        <connect gate="G$1" pin="GPIO28_ADC2" pad="42"/>+        <connect gate="G$1" pin="GPIO29_ADC3" pad="43"/>+        <connect gate="G$1" pin="ADC_AVDD" pad="44"/>+        <connect gate="G$1" pin="IOVDD@6" pad="45"/>+        <connect gate="G$1" pin="VREG_AVDD" pad="46"/>+        <connect gate="G$1" pin="VREG_PGND" pad="47"/>+        <connect gate="G$1" pin="VREG_LX" pad="48"/>+        <connect gate="G$1" pin="VREG_VIN" pad="49"/>+        <connect gate="G$1" pin="VREG_FB" pad="50"/>+        <connect gate="G$1" pin="USB_DM" pad="51"/>+        <connect gate="G$1" pin="USB_DP" pad="52"/>+        <connect gate="G$1" pin="USB_OTP_VDD" pad="53"/>+        <connect gate="G$1" pin="QSPI_IOVDD" pad="54"/>+        <connect gate="G$1" pin="QSPI_SD3" pad="55"/>+        <connect gate="G$1" pin="QSPI_SCLK" pad="56"/>+        <connect gate="G$1" pin="QSPI_SD0" pad="57"/>+        <connect gate="G$1" pin="QSPI_SD2" pad="58"/>+        <connect gate="G$1" pin="QSPI_SD1" pad="59"/>+        <connect gate="G$1" pin="QSPI_SS" pad="60"/>+        <connect gate="G$1" pin="GND" pad="61 61@2"/>+      </connects>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="RP2350A" constant="no"/>+          <attribute name="MANUFACTURER" value="Raspberry Pi" constant="no"/>+          <attribute name="DATASHEET" value="https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8562345067823054848" constant="no"/>+          <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/rp2350a" constant="no"/>+          <attribute name="LCSC_PN" value="C42411118" constant="no"/>+        </technology>+      </technologies>+    </device>+  </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>\ No newline at end of file