← Commit history

Initial commit: component/rn8207c

Ray ·46198dca78 ·
2 files changed +243
README.mdadded+52
@@ -0,0 +1,52 @@+# RN8207C++**RENERGY** · Energy Metering · SOP-16++RN8207C from RENERGY, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | AVDD | power_in | Analog power supply, 3V-5.5V, requires external 10μF and 0.1μF capacitors in parallel for decoupling. |+| 2 | V1P | input | Positive analog input of current channel with maximum ±1000mV in normal operation and ±6V absolute maximum. |+| 3 | V1N | input | Negative analog input of current channel with maximum ±1000mV in normal operation and ±6V absolute maximum. |+| 4 | V2P | input | Positive analog input of voltage channel with maximum ±1000mV in normal operation and ±6V absolute maximum. |+| 5 | V2N | input | Negative analog input of voltage channel with maximum ±1000mV in normal operation and ±6V absolute maximum. |+| 6 | REFV | bidirectional | 1.25V reference voltage input/output, requires external 10μF and 0.1μF capacitors in parallel for decoupling. |+| 7 | A0 | input | Serial communication address selection pin; used with A1 to configure UART address: {A1,A0}=00/01/10 selects address 0/1/2. |+| 8 | A1 | input | Serial communication address selection pin; used with A0 to configure UART address mode. |+| 9 | TX | output | UART transmit output at 4800 baud. |+| 10 | RX/RSTN | input | UART receive input and global reset pin; reset occurs when input is low for more than 20ms. |+| 11 | DGND | power_in | Digital ground. |+| 12 | DVDD | power_in | Digital power supply, 3V-5.5V, requires external 10μF and 0.1μF capacitors in parallel for decoupling. |+| 13 | OSCI | input | Clock input for external crystal or external clock source at typical frequency of 3.579545MHz. |+| 14 | OSCO | output | Crystal oscillator output terminal; can drive one CMOS load when OSCI has external clock connected. |+| 15 | IRQ_N/ZX | output | Programmable interrupt output (IRQ_N when EMUCON bit 7 = 0) or voltage channel zero-crossing detection output (ZX when EMUCON bit 7 = 1). |+| 16 | PF | output | Active energy pulse output, low level by default; frequency indicates transient power magnitude, capable of 5mA current sink. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | RENERGY |+| Package | SOP-16 |+| Category | Data Acquisition |+| Pins | 16 |++## CAD (KiCad official)++- Symbol: `RN8207C`+- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`+- 3D model: SOP-16 (KiCad packages3D, STEP)+- 3D model files: `rn8207c-etched.step` / `rn8207c-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `rn8207c.step` / `rn8207c.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [RENERGY datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882536424882176) (14 pp, sha256 `79bba7db16be6bf4`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/rn8207c-datasheet.pdf)
page.jsonadded+191
@@ -0,0 +1,191 @@+{+  "slug": "rn8207c",+  "version": "0.1.0",+  "type": "component",+  "description": "RENERGY Energy Metering, SOP-16. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "rn8207c",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "rn8207c.kicad_sym",+    "rn8207c.kicad_mod",+    "rn8207c.glb",+    "rn8207c.step",+    "rn8207c.lbr",+    "docs/hero.png",+    "docs/rn8207c-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "RN8207C",+    "manufacturer": "RENERGY",+    "package": "SOP-16",+    "pin_count": 16,+    "category": "Data Acquisition",+    "subcategory": "Energy Metering",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882536424882176",+    "parts": {+      "symbol": "rn8207c.kicad_sym",+      "footprint": "rn8207c.kicad_mod",+      "model_3d": "rn8207c-etched.glb",+      "model_3d_plain": "rn8207c.glb",+      "model_3d_step": "rn8207c-etched.step",+      "model_3d_step_plain": "rn8207c.step",+      "lbr": "rn8207c.lbr"+    },+    "distributor_links": {+      "lcsc": "C167196"+    },+    "pins": [+      {+        "number": "1",+        "name": "AVDD",+        "type": "power_in",+        "description": "Analog power supply, 3V-5.5V, requires external 10μF and 0.1μF capacitors in parallel for decoupling."+      },+      {+        "number": "2",+        "name": "V1P",+        "type": "input",+        "description": "Positive analog input of current channel with maximum ±1000mV in normal operation and ±6V absolute maximum."+      },+      {+        "number": "3",+        "name": "V1N",+        "type": "input",+        "description": "Negative analog input of current channel with maximum ±1000mV in normal operation and ±6V absolute maximum."+      },+      {+        "number": "4",+        "name": "V2P",+        "type": "input",+        "description": "Positive analog input of voltage channel with maximum ±1000mV in normal operation and ±6V absolute maximum."+      },+      {+        "number": "5",+        "name": "V2N",+        "type": "input",+        "description": "Negative analog input of voltage channel with maximum ±1000mV in normal operation and ±6V absolute maximum."+      },+      {+        "number": "6",+        "name": "REFV",+        "type": "bidirectional",+        "description": "1.25V reference voltage input/output, requires external 10μF and 0.1μF capacitors in parallel for decoupling."+      },+      {+        "number": "7",+        "name": "A0",+        "type": "input",+        "description": "Serial communication address selection pin; used with A1 to configure UART address: {A1,A0}=00/01/10 selects address 0/1/2."+      },+      {+        "number": "8",+        "name": "A1",+        "type": "input",+        "description": "Serial communication address selection pin; used with A0 to configure UART address mode."+      },+      {+        "number": "9",+        "name": "TX",+        "type": "output",+        "description": "UART transmit output at 4800 baud."+      },+      {+        "number": "10",+        "name": "RX/RSTN",+        "type": "input",+        "description": "UART receive input and global reset pin; reset occurs when input is low for more than 20ms."+      },+      {+        "number": "11",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground."+      },+      {+        "number": "12",+        "name": "DVDD",+        "type": "power_in",+        "description": "Digital power supply, 3V-5.5V, requires external 10μF and 0.1μF capacitors in parallel for decoupling."+      },+      {+        "number": "13",+        "name": "OSCI",+        "type": "input",+        "description": "Clock input for external crystal or external clock source at typical frequency of 3.579545MHz."+      },+      {+        "number": "14",+        "name": "OSCO",+        "type": "output",+        "description": "Crystal oscillator output terminal; can drive one CMOS load when OSCI has external clock connected."+      },+      {+        "number": "15",+        "name": "IRQ_N/ZX",+        "type": "output",+        "description": "Programmable interrupt output (IRQ_N when EMUCON bit 7 = 0) or voltage channel zero-crossing detection output (ZX when EMUCON bit 7 = 1)."+      },+      {+        "number": "16",+        "name": "PF",+        "type": "output",+        "description": "Active energy pulse output, low level by default; frequency indicates transient power magnitude, capable of 5mA current sink."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [+          "extractor flagged: Pin assignment diagram (Figure 1-2, page 4) appears to have text formatting ambiguities that make it"+        ],+        "pages_sent": 14,+        "cost_usd": 0.234,+        "at": "2026-09-22T13:53:44"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588882536424882176",+        "pages": 14,+        "sha256": "79bba7db16be6bf4",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 16,+        "described": 16,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file