← Commit history
package.json+145−4@@ -1,6 +1,6 @@ { "slug": "rh6618a",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "RONGHE Microelectronics Touch Sensors, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,147 @@ "docs/hero.png", "docs/rh6618a-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "rh6618a-etched.step",+ "rh6618a-etched.glb"+ ],+ "component": {+ "mpn": "RH6618A",+ "manufacturer": "RONGHE Microelectronics",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Touch Sensors",+ "parts": {+ "symbol": "rh6618a.kicad_sym",+ "footprint": "rh6618a.kicad_mod",+ "model_3d": "rh6618a-etched.glb",+ "model_3d_plain": "rh6618a.glb",+ "model_3d_step": "rh6618a-etched.step",+ "model_3d_step_plain": "rh6618a.step",+ "lbr": "rh6618a.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection on the RH6618A(B). Per section 6 note 3, Pin 1 may be left floating or tied to VDD or GND with no internal effect."+ },+ {+ "number": "2",+ "name": "CMOD",+ "type": "bidirectional",+ "description": "Sampling capacitor pin for the capacitive touch front-end. Connect an NPO/X7R capacitor (recommended 2.2 nF-47 nF, up to ~1 uF for large metal touch pads) to GND. Cm value sets touch sensitivity; larger Cm = higher sensitivity."+ },+ {+ "number": "3",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply input. Operating range 2.4 V-5.5 V (typ 3.0 V). Bypass locally with the recommended 10 uF + 0.1 uF filter capacitors placed close to the IC."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground / negative supply return. Reference for VDD, POUT, TCH and CMOD."+ },+ {+ "number": "5",+ "name": "TCH",+ "type": "bidirectional",+ "description": "Capacitive touch sense input. Connect to the touch electrode through a series resistor Rs (>5.1 kΩ recommended) to improve noise immunity. Detects short-press (on/off toggle) and long-press (dimming) events."+ },+ {+ "number": "6",+ "name": "MOD1",+ "type": "input",+ "description": "Mode configuration bit 1. CMOS input with internal pull-up (I-PH); default logic-high. Together with MOD2 selects one of four operating modes per Table 3 (stepless vs 3-level dimming, brightness memory, gradual vs instant on/off). Tie to VDD (=1) or GND (=0)."+ },+ {+ "number": "7",+ "name": "POUT",+ "type": "output",+ "description": "Push-pull CMOS PWM output driving the LED (typically through an NPN driver + current-limit resistor). 25 kHz in stepless dimming, 33 kHz in 3-level dimming. Drive: IOL ≈ 38 mA @ VDD=3 V / 65 mA @ 5 V (VOL=0.3·VDD); IOH ≈ 13 mA @ VDD=3 V / 32 mA @ 5 V (VOH=0.7·VDD)."+ },+ {+ "number": "8",+ "name": "MOD2",+ "type": "input",+ "description": "Mode configuration bit 2. CMOS input with internal pull-up (I-PH); default logic-high. With MOD1 selects the RH6618A(B) operating mode per Table 3. Tie to VDD (=1) or GND (=0)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C511706",+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:14:50Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "rh6618a.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "rh6618a-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "21bad89f3d101ff8f0057044c33d64d317d5a7d9dc9f2387d67f104730f0dc1d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "rh6618a",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "RONGHE Microelectronics Touch Sensors, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/rh6618a-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "rh6618a-etched.step"+ "rh6618a-etched.step",+ "rh6618a-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -170,5 +169,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}