← Commit history
rh6618a: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+74−1
page.json+74−1@@ -33,5 +33,78 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "RH6618A",+ "manufacturer": "RONGHE Microelectronics",+ "package": "SOP-8",+ "pin_count": 8,+ "category": "Touch Sensors",+ "parts": {+ "symbol": "rh6618a.kicad_sym",+ "footprint": "rh6618a.kicad_mod",+ "model_3d": "rh6618a-etched.glb",+ "model_3d_plain": "rh6618a.glb",+ "model_3d_step": "rh6618a-etched.step",+ "model_3d_step_plain": "rh6618a.step",+ "lbr": "rh6618a.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection on the RH6618A(B). Per section 6 note 3, Pin 1 may be left floating or tied to VDD or GND with no internal effect."+ },+ {+ "number": "2",+ "name": "CMOD",+ "type": "bidirectional",+ "description": "Sampling capacitor pin for the capacitive touch front-end. Connect an NPO/X7R capacitor (recommended 2.2 nF-47 nF, up to ~1 uF for large metal touch pads) to GND. Cm value sets touch sensitivity; larger Cm = higher sensitivity."+ },+ {+ "number": "3",+ "name": "VDD",+ "type": "power_in",+ "description": "Positive supply input. Operating range 2.4 V-5.5 V (typ 3.0 V). Bypass locally with the recommended 10 uF + 0.1 uF filter capacitors placed close to the IC."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground / negative supply return. Reference for VDD, POUT, TCH and CMOD."+ },+ {+ "number": "5",+ "name": "TCH",+ "type": "bidirectional",+ "description": "Capacitive touch sense input. Connect to the touch electrode through a series resistor Rs (>5.1 kΩ recommended) to improve noise immunity. Detects short-press (on/off toggle) and long-press (dimming) events."+ },+ {+ "number": "6",+ "name": "MOD1",+ "type": "input",+ "description": "Mode configuration bit 1. CMOS input with internal pull-up (I-PH); default logic-high. Together with MOD2 selects one of four operating modes per Table 3 (stepless vs 3-level dimming, brightness memory, gradual vs instant on/off). Tie to VDD (=1) or GND (=0)."+ },+ {+ "number": "7",+ "name": "POUT",+ "type": "output",+ "description": "Push-pull CMOS PWM output driving the LED (typically through an NPN driver + current-limit resistor). 25 kHz in stepless dimming, 33 kHz in 3-level dimming. Drive: IOL ≈ 38 mA @ VDD=3 V / 65 mA @ 5 V (VOL=0.3·VDD); IOH ≈ 13 mA @ VDD=3 V / 32 mA @ 5 V (VOH=0.7·VDD)."+ },+ {+ "number": "8",+ "name": "MOD2",+ "type": "input",+ "description": "Mode configuration bit 2. CMOS input with internal pull-up (I-PH); default logic-high. With MOD1 selects the RH6618A(B) operating mode per Table 3. Tie to VDD (=1) or GND (=0)."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}