RH6030

@@ -8,12 +8,12 @@ RH6030 from RONGHE Microelectronics, in a SOT-23-6L. Pinout and pin descriptions  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | OUT | output | CMOS logic output driven by the touch detector. Polarity (active-high or active-low) is selected by the OLH pin; default is active-high. In sync mode (HLD=0) it follows the touch; in hold mode (HLD=1) it toggles state per touch. |+| 1 | OUT | output | CMOS output driven by the touch detection. Polarity is configured by OLH: active-high by default, active-low when OLH=1. In sync mode it tracks the touch; in hold mode it toggles per touch. | | 2 | GND | power_in | Negative supply / ground reference. All voltages are referenced to GND. |-| 3 | TCH | input | Touch key input. Connects to the external capacitive sense electrode (typically through a series resistor Rs ~1k) and optionally an adjustment capacitor Cj (0-50 pF) to ground for sensitivity tuning. |-| 4 | OLH | input | Output active-level select. Internal pull-down; default (=0) OUT is active-high. Drive high (=1) to make OUT active-low. |-| 5 | VDD | power_in | Positive supply. Operating range 2.0-5.5 V, typical 3.0 V. A local decoupling capacitor between VDD and GND is required to suppress noise. |-| 6 | HLD | input | Hold/Sync mode select. Internal pull-down; default (=0) selects Sync mode (OUT follows touch). Drive high (=1) to select Hold mode (OUT toggles/latches on each touch event). |+| 3 | TCH | input | Touch sense input. Connects to the touch electrode, typically through a series resistor Rs (~1k) for noise immunity, with an optional 0-50pF Cj capacitor to ground for sensitivity trimming. |+| 4 | OLH | input | Output polarity select. Internal pull-down (default =0) sets OUT to active-high; tie to VDD (=1) for active-low output. |+| 5 | VDD | power_in | Positive supply. Operating range 2.0V to 5.5V (absolute max -0.3 to 5.5V). Requires a decoupling capacitor to GND; power must be stable to avoid sensitivity drift. |+| 6 | HLD | input | Hold/sync mode select. Internal pull-down (default =0) selects sync mode (OUT follows touch presence); tie to VDD (=1) for hold mode (OUT toggles on each touch and latches). |  ## Key specifications 

@@ -32,7 +32,7 @@         "number": "1",         "name": "OUT",         "type": "output",-        "description": "CMOS logic output driven by the touch detector. Polarity (active-high or active-low) is selected by the OLH pin; default is active-high. In sync mode (HLD=0) it follows the touch; in hold mode (HLD=1) it toggles state per touch."+        "description": "CMOS output driven by the touch detection. Polarity is configured by OLH: active-high by default, active-low when OLH=1. In sync mode it tracks the touch; in hold mode it toggles per touch."       },       {         "number": "2",@@ -44,25 +44,25 @@         "number": "3",         "name": "TCH",         "type": "input",-        "description": "Touch key input. Connects to the external capacitive sense electrode (typically through a series resistor Rs ~1k) and optionally an adjustment capacitor Cj (0-50 pF) to ground for sensitivity tuning."+        "description": "Touch sense input. Connects to the touch electrode, typically through a series resistor Rs (~1k) for noise immunity, with an optional 0-50pF Cj capacitor to ground for sensitivity trimming."       },       {         "number": "4",         "name": "OLH",         "type": "input",-        "description": "Output active-level select. Internal pull-down; default (=0) OUT is active-high. Drive high (=1) to make OUT active-low."+        "description": "Output polarity select. Internal pull-down (default =0) sets OUT to active-high; tie to VDD (=1) for active-low output."       },       {         "number": "5",         "name": "VDD",         "type": "power_in",-        "description": "Positive supply. Operating range 2.0-5.5 V, typical 3.0 V. A local decoupling capacitor between VDD and GND is required to suppress noise."+        "description": "Positive supply. Operating range 2.0V to 5.5V (absolute max -0.3 to 5.5V). Requires a decoupling capacitor to GND; power must be stable to avoid sensitivity drift."       },       {         "number": "6",         "name": "HLD",         "type": "input",-        "description": "Hold/Sync mode select. Internal pull-down; default (=0) selects Sync mode (OUT follows touch). Drive high (=1) to select Hold mode (OUT toggles/latches on each touch event)."+        "description": "Hold/sync mode select. Internal pull-down (default =0) selects sync mode (OUT follows touch presence); tie to VDD (=1) for hold mode (OUT toggles on each touch and latches)."       }     ],     "provenance": {@@ -126,8 +126,5 @@     "docs/rh6030-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": {-    "public": true-  }+  ] }\ No newline at end of file

@@ -50,7 +50,7 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>RONGHE Microelectronics Touch Sensors, SOT-23-6L</description> <packages> <package name="SOT-23-6">   <description>6 pads, 3.6 x 2.5 mm. SOT, 6 Pin</description>@@ -84,6 +84,7 @@ </packages> <symbols> <symbol name="RH6030">+  <description>RONGHE Microelectronics Touch Sensors, SOT-23-6L</description>   <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="5.08" x2="12.7" y2="-5.08" width="0.254" layer="94"/>   <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>@@ -100,7 +101,7 @@ </symbols> <devicesets> <deviceset name="RH6030" prefix="U">-  <description></description>+  <description>RONGHE Microelectronics Touch Sensors, SOT-23-6L</description>   <gates>     <gate name="G$1" symbol="RH6030" x="0" y="0"/>   </gates>@@ -114,7 +115,12 @@         <connect gate="G$1" pin="VDD" pad="5"/>         <connect gate="G$1" pin="OLH" pad="4"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="RH6030" constant="no"/>+          <attribute name="MANUFACTURER" value="RONGHE Microelectronics" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>