← Commit history
Publish 0.1.1
4 files changed
+364−11
package.json+139−4@@ -1,6 +1,6 @@ { "slug": "rh6016d",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "RONGHE Microelectronics Touch Sensors, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,141 @@ "docs/hero.png", "docs/rh6016d-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "rh6016d-etched.step",+ "rh6016d-hero.glb",+ "rh6016d-hero.overlay.json"+ ],+ "component": {+ "mpn": "RH6016D",+ "manufacturer": "RONGHE Microelectronics",+ "package": "SOT-23-6",+ "pin_count": 6,+ "category": "Sensor",+ "subcategory": "Touch Sensors",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/a81f723ef7ba8e94c4707385e14774b7.pdf",+ "parts": {+ "symbol": "rh6016d.kicad_sym",+ "footprint": "rh6016d.kicad_mod",+ "model_3d": "rh6016d-hero.glb",+ "model_3d_plain": "rh6016d.glb",+ "model_3d_step": "rh6016d-etched.step",+ "model_3d_step_plain": "rh6016d.step",+ "lbr": "rh6016d.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "passive",+ "description": "Sampling capacitance pin. Connect an external capacitor (typ. 10nF-47nF, Cm) between CS and GND to set the touch-detection sampling reference."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground reference (0V)."+ },+ {+ "number": "3",+ "name": "TCH",+ "type": "bidirectional",+ "description": "Touch channel input/output. Connects to the external touch electrode/pad, typically through a series resistor (Rs, ~5K) for ESD/noise protection."+ },+ {+ "number": "4",+ "name": "TOG",+ "type": "input",+ "description": "Latch/Synchronous mode configuration input with internal pull-low resistor. TOG=0 (default, floating) selects Synchronous mode; TOG=1 (tied to VDD) selects Latch mode where OD toggles on each valid touch."+ },+ {+ "number": "5",+ "name": "VDD",+ "type": "power_in",+ "description": "Supply voltage input, 2.4V to 5.5V (typ. 3.0V). Decouple with 10uF + 0.1uF to GND per application circuit."+ },+ {+ "number": "6",+ "name": "OD",+ "type": "output",+ "description": "NMOS open-drain touch-detect output. High-impedance state after power-on; pulls low (IOL up to 30mA @ VOL=0.3VDD) when a valid touch is detected. Requires an external pull-up resistor to VDD for a defined logic-high level."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/a81f723ef7ba8e94c4707385e14774b7.pdf",+ "pages": 10,+ "sha256": "1ca4d3d3fa041b10",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 6,+ "described": 6,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "rh6016d.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "rh6016d-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "9f2af36f7f01fcb1468d43b4715381a3ed9566291f90b4a7a7b1be8103ed818d",+ "checked": "2026-11-03",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "title": "RH6016D",+ "brief": "RONGHE Microelectronics Touch Sensors, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",+ "metadata": {+ "specs": {+ "Manufacturer": "RONGHE Microelectronics",+ "Package": "SOT-23-6",+ "Category": "Sensor",+ "Pins": "6"+ }+ },+ "discovery_triggers": [+ "rh6016d"+ ],+ "discovery_pitch": "RH6016D (RONGHE Microelectronics) component page with datasheet-verified CAD.",+ "visibility": "public"+}
page.json+9−7@@ -4,7 +4,7 @@ "slug": "rh6016d", "title": "RH6016D", "brief": "RONGHE Microelectronics Touch Sensors, SOT-23-6. Pinout extracted from the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -167,11 +167,11 @@ "docs/rh6016d-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "rh6016d-etched.step"+ "rh6016d-etched.step",+ "rh6016d-hero.glb",+ "rh6016d-hero.overlay.json" ],- "visibility": {- "public": true- },+ "visibility": "public", "variants": [ { "mpn": "RH6016D",@@ -194,5 +194,7 @@ "kind": "unknown" } ],- "updated_at": "2026-09-25T04:51:38.859Z"-}+ "updated_at": "2026-09-25T04:51:38.859Z",+ "description": "RONGHE Microelectronics Touch Sensors, SOT-23-6. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "org": "adom"+}
rh6016d-hero.glbadded⋯ 1 unchanged line ⋯
rh6016d-hero.overlay.jsonadded+216@@ -0,0 +1,216 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "RH6016D",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 6,+ "span_mm": 3.6,+ "dash_mm": 0.12,+ "gap_mm": 0.072,+ "pad_stroke_mm": 0.03+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 6,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.288,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -1.4,+ 1.4,+ -1.2,+ 1.2+ ],+ "pads_bbox_mm": [+ -1.8,+ 1.8,+ -1.25,+ 1.25+ ],+ "seating_z_mm": -0.0+ },+ "sources": {+ "glb": "rh6016d-etched.glb",+ "glb_sha256": "4d5990970b227a6def7b63b846cdfc8b126bd081eef8a667ceb6a68c6e619293",+ "footprint": "rh6016d.kicad_mod",+ "footprint_sha256": "f341c73aac9dcb553456f68bf3fee3d26eb14acf6d8a1cae82b50418fe1d71ca",+ "pins": "page.json component.pins",+ "pins_sha256": "05cf1bb7c9e07505e0baf91106f59387ea8499a9352cadbf72427817e09add9d"+ },+ "generator": "adom-wiki 1.8.31 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "CS",+ "x": -1.919,+ "y": -0.95,+ "align": "right",+ "vertical": false,+ "h": 0.475+ },+ {+ "pad": "2",+ "text": "GND",+ "x": -1.919,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.475+ },+ {+ "pad": "3",+ "text": "TCH",+ "x": -1.919,+ "y": 0.95,+ "align": "right",+ "vertical": false,+ "h": 0.475+ },+ {+ "pad": "4",+ "text": "TOG",+ "x": 1.919,+ "y": 0.95,+ "align": "left",+ "vertical": false,+ "h": 0.475+ },+ {+ "pad": "5",+ "text": "VDD",+ "x": 1.919,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.475+ },+ {+ "pad": "6",+ "text": "OD",+ "x": 1.919,+ "y": -0.95,+ "align": "left",+ "vertical": false,+ "h": 0.475+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -1.1375,+ -0.95+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -1.1375,+ 0.0+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -1.1375,+ 0.95+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ 1.1375,+ 0.95+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ 1.1375,+ 0.0+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ 1.1375,+ -0.95+ ],+ "size_mm": [+ 1.325,+ 0.6+ ],+ "rot": 0.0+ }+ ]+}