← Commit history
rh6016cb: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+62−1
page.json+62−1@@ -33,5 +33,66 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "RH6016CB",+ "manufacturer": "RONGHE Microelectronics",+ "package": "SOT-23-6",+ "pin_count": 6,+ "category": "Touch Sensors",+ "parts": {+ "symbol": "rh6016cb.kicad_sym",+ "footprint": "rh6016cb.kicad_mod",+ "model_3d": "rh6016cb-etched.glb",+ "model_3d_plain": "rh6016cb.glb",+ "model_3d_step": "rh6016cb-etched.step",+ "model_3d_step_plain": "rh6016cb.step",+ "lbr": "rh6016cb.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "CS",+ "type": "passive",+ "description": "Sampling capacitance pin. Connect an external modulation capacitor Cm (typ. 10 nF - 47 nF) between CS and GND to set the capacitive-sensing reference."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference (0 V)."+ },+ {+ "number": "3",+ "name": "TCH",+ "type": "bidirectional",+ "description": "Touch-sense channel. Connects through a series resistor Rs (typ. 5 kΩ) to the external touch pad/electrode."+ },+ {+ "number": "4",+ "name": "TOG",+ "type": "input",+ "description": "Latch/Synchronous mode select input with internal pull-low. TOG=0 (default, floating) = Synchronous Mode; TOG=1 (tied to VDD) = Latch Mode."+ },+ {+ "number": "5",+ "name": "VDD",+ "type": "power_in",+ "description": "Supply voltage input, 2.4 V to 5.5 V (typ. 3.0 V). Bypass with 10 uF and 0.1 uF capacitors to GND."+ },+ {+ "number": "6",+ "name": "OC",+ "type": "output",+ "description": "CMOS push-pull touch-detect output. On RH6016CB the output is factory-fixed active-high: idle low after power-on, drives high when a valid touch is detected. Drive capability IOL=20 mA @ VOL=0.3·VDD, IOH=10 mA @ VOH=0.7·VDD."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}