← Commit history
reg710na-3-3: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding)
2 files changed
+89−9
package.json+47−7@@ -53,7 +53,7 @@ "number": "1", "name": "VOUT", "type": "output",- "description": "Regulated 3.3-V output supply; connect the output capacitor (2.2 \u03bcF recommended) to this pin."+ "description": "Regulated 3.3-V output supply; connect the output capacitor (2.2 μF recommended) to this pin." }, { "number": "2",@@ -65,25 +65,25 @@ "number": "3", "name": "Enable", "type": "input",- "description": "Hardware enable/disable control input; logic high voltage \u22651.3 V enables regulation, logic low voltage \u22640.4 V initiates shutdown mode with quiescent current \u22641 \u03bcA."+ "description": "Hardware enable/disable control input; logic high voltage ≥1.3 V enables regulation, logic low voltage ≤0.4 V initiates shutdown mode with quiescent current ≤1 μA." }, { "number": "4", "name": "CPUMP-", "type": "passive",- "description": "Negative node of the flying capacitor; connect a 0.22-\u03bcF pump capacitor between this pin and CPUMP+."+ "description": "Negative node of the flying capacitor; connect a 0.22-μF pump capacitor between this pin and CPUMP+." }, { "number": "5", "name": "VIN", "type": "power_in",- "description": "Input supply pin accepting unregulated input voltage from 1.8 V to 5.5 V; connect input capacitor (2.2 \u03bcF recommended) to this pin."+ "description": "Input supply pin accepting unregulated input voltage from 1.8 V to 5.5 V; connect input capacitor (2.2 μF recommended) to this pin." }, { "number": "6", "name": "CPUMP+", "type": "passive",- "description": "Positive node of the flying capacitor; connect a 0.22-\u03bcF pump capacitor between CPUMP- and this pin."+ "description": "Positive node of the flying capacitor; connect a 0.22-μF pump capacitor between CPUMP- and this pin." } ], "provenance": {@@ -118,6 +118,46 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "reg710na-3-3.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "reg710na-3-3-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "284cce5a8405ee8206897321fff660446709b593b3bde874f3d96aed2cbee93d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }-}+}
page.json+42−2@@ -103,7 +103,47 @@ "viewers": { "symbol": "viewers/symbol.html", "footprint": "viewers/footprint.html"- }+ },+ "models_3d": [+ {+ "file": "reg710na-3-3.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "reg710na-3-3-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "284cce5a8405ee8206897321fff660446709b593b3bde874f3d96aed2cbee93d",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ] }, "metadata": { "specs": {@@ -151,4 +191,4 @@ "public": true }, "updated_at": "2026-09-25T04:50:22.595Z"-}+}