← Commit history

ref02au: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·cea3327420 · ·parent f03a6b2
1 file changed +75−1
page.json+75−1
@@ -33,5 +33,79 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "REF02AU",+    "manufacturer": "Texas Instruments",+    "package": "SOIC-8",+    "pin_count": 8,+    "category": "Voltage Reference",+    "datasheet": "https://www.ti.com/lit/ds/symlink/ref02au.pdf",+    "parts": {+      "symbol": "ref02au.kicad_sym",+      "footprint": "ref02au.kicad_mod",+      "model_3d": "ref02au-etched.glb",+      "model_3d_plain": "ref02au.glb",+      "model_3d_step": "ref02au-etched.step",+      "model_3d_step_plain": "ref02au.step",+      "lbr": "ref02au.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to ground per board policy."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Positive supply input. Accepts +8V to +40V (absolute maximum +40V). Typical quiescent current is 1.0mA (1.4mA max) with no load. A 0.1µF bypass capacitor to GND is recommended per the typical application circuit."+      },+      {+        "number": "3",+        "name": "Temp",+        "type": "output",+        "description": "Temperature-proportional voltage output. Typically 630mV at +25°C with a temperature coefficient of approximately 2.1mV/°C (−55°C to +125°C). Pin is insensitive to capacitive loading; the temperature voltage is modified by 7mV per µA of loading, so keep the load current very small."+      },+      {+        "number": "4",+        "name": "GND",+        "type": "power_in",+        "description": "Device ground return. Common reference for VIN, VOUT, and the Trim network."+      },+      {+        "number": "5",+        "name": "Trim",+        "type": "input",+        "description": "Output trim/adjust input. Connect the wiper of a 10kΩ potentiometer wired between VOUT (pin 6) and GND (pin 4) to this pin to trim the output over approximately ±150mV (±3% typ, ±6% max) around +5V. Leave floating if trimming is not used. Adjustment has minimal effect on temperature stability (~0.7ppm/°C per 100mV of trim)."+      },+      {+        "number": "6",+        "name": "VOUT",+        "type": "output",+        "description": "Precision +5V reference output (±15mV initial accuracy for REF02A grade). Sources up to 21mA typ and sinks up to −0.5mA typ; short-circuit protected (~30mA typ to GND or VIN). Line regulation 0.010%/V max, load regulation 0.010%/mA max."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to ground per board policy."+      },+      {+        "number": "8",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection. Leave floating or tie to ground per board policy."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}