← Commit history
package.json+145−4@@ -1,6 +1,6 @@ { "slug": "ref02au",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Voltage Reference, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,147 @@ "docs/hero.png", "docs/ref02au-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "ref02au-etched.step",+ "ref02au-etched.glb"+ ],+ "component": {+ "mpn": "REF02AU",+ "manufacturer": "Texas Instruments",+ "package": "SOIC-8",+ "pin_count": 8,+ "category": "Voltage Reference",+ "datasheet": "https://www.ti.com/lit/ds/symlink/ref02au.pdf",+ "parts": {+ "symbol": "ref02au.kicad_sym",+ "footprint": "ref02au.kicad_mod",+ "model_3d": "ref02au-etched.glb",+ "model_3d_plain": "ref02au.glb",+ "model_3d_step": "ref02au-etched.step",+ "model_3d_step_plain": "ref02au.step",+ "lbr": "ref02au.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to ground per board policy."+ },+ {+ "number": "2",+ "name": "VIN",+ "type": "power_in",+ "description": "Positive supply input. Accepts +8V to +40V (absolute maximum +40V). Typical quiescent current is 1.0mA (1.4mA max) with no load. A 0.1µF bypass capacitor to GND is recommended per the typical application circuit."+ },+ {+ "number": "3",+ "name": "Temp",+ "type": "output",+ "description": "Temperature-proportional voltage output. Typically 630mV at +25°C with a temperature coefficient of approximately 2.1mV/°C (−55°C to +125°C). Pin is insensitive to capacitive loading; the temperature voltage is modified by 7mV per µA of loading, so keep the load current very small."+ },+ {+ "number": "4",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground return. Common reference for VIN, VOUT, and the Trim network."+ },+ {+ "number": "5",+ "name": "Trim",+ "type": "input",+ "description": "Output trim/adjust input. Connect the wiper of a 10kΩ potentiometer wired between VOUT (pin 6) and GND (pin 4) to this pin to trim the output over approximately ±150mV (±3% typ, ±6% max) around +5V. Leave floating if trimming is not used. Adjustment has minimal effect on temperature stability (~0.7ppm/°C per 100mV of trim)."+ },+ {+ "number": "6",+ "name": "VOUT",+ "type": "output",+ "description": "Precision +5V reference output (±15mV initial accuracy for REF02A grade). Sources up to 21mA typ and sinks up to −0.5mA typ; short-circuit protected (~30mA typ to GND or VIN). Line regulation 0.010%/V max, load regulation 0.010%/mA max."+ },+ {+ "number": "7",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to ground per board policy."+ },+ {+ "number": "8",+ "name": "NC",+ "type": "unconnected",+ "description": "No internal connection. Leave floating or tie to ground per board policy."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "digikey": "REF02AU-ND",+ "mouser": "595-REF02AU"+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:14:37Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": "REF02AU-ND",+ "status": "found"+ },+ "mouser": {+ "pn": "595-REF02AU",+ "status": "found"+ }+ },+ "models_3d": [+ {+ "file": "ref02au.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "07f46cff378d30e6c27dfd5a03092c795323f86d91c71fc7e743f4f418dc553a",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ref02au-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 6,+ 4.9,+ 1.75+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "c319bb7c25a83fbce701192d926e3c88ef45a5325b9df9ae4ced95d93fd788e2",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "ref02au",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Voltage Reference, SOIC-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/ref02au-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "ref02au-etched.step"+ "ref02au-etched.step",+ "ref02au-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -170,5 +169,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}