← Commit history
page.json+10−7@@ -32,19 +32,19 @@ "number": "1", "name": "BAT", "type": "power_in",- "description": "Battery positive terminal. Connects to the Li-ion cell (+). Float charge voltage 4.20V \u00b11%, trickle-charge threshold 2.7V, discharge cutoff 2.5V, re-enable 2.9V. Absolute max -5V to +4.5V."+ "description": "Battery positive terminal. Connects to the Li-ion cell (+). Float charge voltage 4.20V ±1%, trickle-charge threshold 2.7V, discharge cutoff 2.5V, re-enable 2.9V. Absolute max -5V to +4.5V." }, { "number": "2", "name": "LED", "type": "output",- "description": "Indicator-LED anode drive. Sources ~3 mA typical. Blinks 1 Hz 50% during charging, solid on when fully charged, 0.5s-on / 4.5s-off when battery < 2.9 V, 8\u00d7 1 Hz blinks when battery < 2.5 V."+ "description": "Indicator-LED anode drive. Sources ~3 mA typical. Blinks 1 Hz 50% during charging, solid on when fully charged, 0.5s-on / 4.5s-off when battery < 2.9 V, 8× 1 Hz blinks when battery < 2.5 V." }, { "number": "3", "name": "VDD", "type": "power_in",- "description": "Charger input power (from USB / 5 V rail). Operating range 3.6 V-5 V; UVLO \u2248 2.55 V. Absolute max -5V to +5.5V."+ "description": "Charger input power (from USB / 5 V rail). Operating range 3.6 V-5 V; UVLO ≈ 2.55 V. Absolute max -5V to +5.5V." }, { "number": "4",@@ -56,7 +56,7 @@ "number": "5", "name": "LDO", "type": "power_out",- "description": "Internal LDO output. Requires a 10 \u00b5F decoupling capacitor to GND per typical application."+ "description": "Internal LDO output. Requires a 10 µF decoupling capacitor to GND per typical application." }, { "number": "6",@@ -68,13 +68,13 @@ "number": "7", "name": "SEL", "type": "input",- "description": "Dimming-sequence select. Float: touch cycles OUT duty 25%\u219250%\u2192100%\u21920. Tied to GND: touch cycles OUT duty 100%\u219250%\u219225%\u21920. PWM frequency 30 kHz."+ "description": "Dimming-sequence select. Float: touch cycles OUT duty 25%→50%→100%→0. Tied to GND: touch cycles OUT duty 100%→50%→25%→0. PWM frequency 30 kHz." }, { "number": "8", "name": "OUT", "type": "output",- "description": "Open-drain low-side switch to the LED lamp cathode. Internal NMOS Rds(on) ~150 m\u03a9. LED short-circuit protection trips at IOCP \u2248 2.5 A (VBAT = 3.7 V). Absolute max -0.3V to +5.5V."+ "description": "Open-drain low-side switch to the LED lamp cathode. Internal NMOS Rds(on) ~150 mΩ. LED short-circuit protection trips at IOCP ≈ 2.5 A (VBAT = 3.7 V). Absolute max -0.3V to +5.5V." }, { "number": "9",@@ -145,5 +145,8 @@ "docs/qk1201-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }