component
Q4040J7TP
Public Made by Adomby adom
Littelfuse Thyristors (SCR)/Modules, TO-218-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+3006
README.mdadded+73@@ -0,0 +1,73 @@+# Q4040J7TP++**Littelfuse** · Thyristors (SCR)/Modules · TO-218-3++Q4040J7TP from Littelfuse, in a TO-218-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | MT1 | passive | Main terminal 1, to which all device voltages and gate-trigger polarities are referenced (Figure 1); the datasheet gives no separate pin-number marking for this terminal. |+| 2 | MT2 | passive | Main terminal 2, the bidirectional switched terminal; the device is rated for VDRM/VRRM of 400 V for this 400 V variant and IT(RMS) of 40 A at TC = 75 °C. |+| 3 | Gate | input | Gate trigger input for Qxx40J7 (100 mA max IGT in quadrants I-III, 2.0 V max VGT at VD = 12 V); peak gate current is limited to 4 A (tp = 20 µs, TJ = 125 °C) and average gate power to 0.5 W. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Littelfuse |+| Package | TO-218-3 |+| Category | Transistors/Thyristors |+| Pins | 3 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Gate trigger current (I-II-III) | IGT | | | 100 | mA | VD = 12V, RL = 60 Ω, I, II, III | 2 |+| Gate trigger voltage (ALL quadrants) | VGT | | | 2 | V | VD = 12V, RL = 60 Ω, I, II, III | 2 |+| Gate non-trigger voltage | VGD | 0.2 | | | V | VD = VDRM, RL = 3.3 kΩ, TJ = 125°C, I, II, III | 2 |+| Holding current | IH | | | 100 | mA | IT = 400mA | 2 |+| Critical rate of rise of off-state voltage (400V) | dv/dt | 700 | | | V/μs | VD = VDRM, Gate Open, TJ = 125°C, 400V | 2 |+| Critical rate of rise of off-state voltage at commutation | (dv/dt)c | 50 | | | V/µs | (di/dt)c = 21.6 A/ms, TJ = 125°C | 2 |+| On-state voltage | VTM | | | 1.8 | V | ITM = 56.6A, tp = 380 µs, TJ = 25°C | 3 |+| Peak off-state current | IDRM | | | 20 | µA | VD = VDRM / VRRM, TJ = 25°C, 400-1000V | 3 |+| Peak off-state current | IDRM | | | 5 | mA | VD = VDRM / VRRM, TJ = 125°C, 400-800V | 3 |+| RMS on-state current (full sine wave) | IT(RMS) | | | 40 | A | TC = 75 °C | 2 |+| Peak non-repetitive surge on-state current | ITSM | | | 335 | A | Full cycle, TJ initial = 25°C; f = 50 Hz, t = 20 ms | 2 |+| Peak non-repetitive surge on-state current | ITSM | | | 400 | A | Full cycle, TJ initial = 25°C; f = 60 Hz, t = 16.7 ms | 2 |+| I2t value for fusing | I2t | | | 664 | A2s | tp = 8.3 ms | 2 |+| Critical rate of rise of on-state current | di/dt | | | 150 | A/µs | f = 120 Hz; TJ = 125 °C; IG = 2 x IGT, tr ≤ 100 ns | 2 |+| Peak gate trigger current | IGTM | | | 4 | A | tp = 20 µs; TJ = 125 °C | 2 |+| Average gate power dissipation | PG(AV) | | | 0.5 | W | TJ = 125 °C | 2 |+| Storage temperature range | Tstg | -40 | | 150 | °C | | 2 |+| Operating junction temperature range | TJ | -40 | | 125 | °C | | 2 |+| Thermal resistance, junction to case (AC) | RθJ-C | | 0.95 | | °C/W | Junction to case (AC), Qxx40J7 | 3 |++## Materials and finish++As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).++| Part | Material | Colour / plating | Datasheet says | Page |+|---|---|---|---|---|+| contacts | | tin | Lead Bend MIL-STD-750, M-2036 Cond E Terminal Finish 100% Matte Tin-plated. | 6 |++## CAD (KiCad official)++- Symbol: `Q4040J7TP`+- Footprint: `Package_TO_SOT_THT:TO-218-3_Vertical`+- 3D model: TO-218-3 (KiCad packages3D, STEP)+- 3D model files: `q4040j7tp-etched.step` / `q4040j7tp-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `q4040j7tp.step` / `q4040j7tp.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Littelfuse datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602598405625421824) (8 pp, sha256 `bc762ef3ea031978`, retrieved 2026-10-19, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/q4040j7tp-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/q4040j7tp-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+165@@ -0,0 +1,165 @@+{+ "slug": "q4040j7tp",+ "version": "0.1.0",+ "type": "component",+ "description": "Littelfuse Thyristors (SCR)/Modules, TO-218-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "transistors-thyristors",+ "q4040j7tp",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "q4040j7tp.kicad_sym",+ "q4040j7tp.kicad_mod",+ "q4040j7tp.glb",+ "q4040j7tp.step",+ "q4040j7tp.lbr",+ "docs/hero.png",+ "docs/q4040j7tp-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "q4040j7tp-hero.glb",+ "q4040j7tp-hero.overlay.json",+ "q4040j7tp-etched.glb"+ ],+ "component": {+ "mpn": "Q4040J7TP",+ "manufacturer": "Littelfuse",+ "package": "TO-218-3",+ "pin_count": 3,+ "category": "Transistors/Thyristors",+ "subcategory": "Thyristors (SCR)/Modules",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602598405625421824",+ "parts": {+ "symbol": "q4040j7tp.kicad_sym",+ "footprint": "q4040j7tp.kicad_mod",+ "model_3d": "q4040j7tp-hero.glb",+ "model_3d_plain": "q4040j7tp-etched.glb",+ "model_3d_step": "q4040j7tp-etched.step",+ "model_3d_step_plain": "q4040j7tp.step",+ "lbr": "q4040j7tp.lbr"+ },+ "distributor_links": {+ "lcsc": "C17626963",+ "digikey": "1294-Q4040J7TP-CHP",+ "mouser": "576-Q4040J7TP"+ },+ "distributor_check": {+ "checked_at": "2026-10-19T01:40:22Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "1294-Q4040J7TP-CHP",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "576-Q4040J7TP",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "MT1",+ "type": "passive",+ "description": "Main terminal 1, to which all device voltages and gate-trigger polarities are referenced (Figure 1); the datasheet gives no separate pin-number marking for this terminal."+ },+ {+ "number": "2",+ "name": "MT2",+ "type": "passive",+ "description": "Main terminal 2, the bidirectional switched terminal; the device is rated for VDRM/VRRM of 400 V for this 400 V variant and IT(RMS) of 40 A at TC = 75 °C."+ },+ {+ "number": "3",+ "name": "Gate",+ "type": "input",+ "description": "Gate trigger input for Qxx40J7 (100 mA max IGT in quadrants I-III, 2.0 V max VGT at VD = 12 V); peak gate current is limited to 4 A (tp = 20 µs, TJ = 125 °C) and average gate power to 0.5 W."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet's TO-218X (J Package) drawing labels the terminals MT1, MT2 and Gate but does not prin; Q4040J7TP is the 400 V (voltage code 40) Qxx40J7 part in the TO-218X J package, sold in tube packing"+ ],+ "pages_sent": 8,+ "cost_usd": 0.1056,+ "at": "2026-10-19T01:40:07"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602598405625421824",+ "pages": 8,+ "sha256": "bc762ef3ea031978",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "q4040j7tp.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 14.96,+ 4.82,+ 32.1+ ],+ "zmin_mm": -9.75,+ "centre_offset_mm": 0.76,+ "footprint_binding": "identity",+ "sha256": "5902af0e840d059a64b690533775dc4c47c81ab237d4f0abf3786a32ff1076ec",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "q4040j7tp-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 14.96,+ 4.82,+ 32.1+ ],+ "zmin_mm": -9.75,+ "centre_offset_mm": 0.76,+ "footprint_binding": "identity",+ "sha256": "0e13665a93c289bbe3909b15f3c9493f687cd1b82cbb1c2e4aa9319848ae8e8b",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+171@@ -0,0 +1,171 @@+{+ "slug": "q4040j7tp",+ "version": "0.1.0",+ "type": "component",+ "description": "Littelfuse Thyristors (SCR)/Modules, TO-218-3. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "transistors-thyristors",+ "q4040j7tp",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "q4040j7tp.kicad_sym",+ "q4040j7tp.kicad_mod",+ "q4040j7tp.glb",+ "q4040j7tp.step",+ "q4040j7tp.lbr",+ "docs/hero.png",+ "docs/q4040j7tp-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "q4040j7tp-hero.glb",+ "q4040j7tp-hero.overlay.json",+ "q4040j7tp-etched.glb"+ ],+ "component": {+ "mpn": "Q4040J7TP",+ "manufacturer": "Littelfuse",+ "package": "TO-218-3",+ "pin_count": 3,+ "category": "Transistors/Thyristors",+ "subcategory": "Thyristors (SCR)/Modules",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602598405625421824",+ "parts": {+ "symbol": "q4040j7tp.kicad_sym",+ "footprint": "q4040j7tp.kicad_mod",+ "model_3d": "q4040j7tp-hero.glb",+ "model_3d_plain": "q4040j7tp-etched.glb",+ "model_3d_step": "q4040j7tp-etched.step",+ "model_3d_step_plain": "q4040j7tp.step",+ "lbr": "q4040j7tp.lbr"+ },+ "distributor_links": {+ "lcsc": "C17626963",+ "digikey": "1294-Q4040J7TP-CHP",+ "mouser": "576-Q4040J7TP"+ },+ "distributor_check": {+ "checked_at": "2026-10-19T01:40:22Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "1294-Q4040J7TP-CHP",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "576-Q4040J7TP",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "MT1",+ "type": "passive",+ "description": "Main terminal 1, to which all device voltages and gate-trigger polarities are referenced (Figure 1); the datasheet gives no separate pin-number marking for this terminal."+ },+ {+ "number": "2",+ "name": "MT2",+ "type": "passive",+ "description": "Main terminal 2, the bidirectional switched terminal; the device is rated for VDRM/VRRM of 400 V for this 400 V variant and IT(RMS) of 40 A at TC = 75 °C."+ },+ {+ "number": "3",+ "name": "Gate",+ "type": "input",+ "description": "Gate trigger input for Qxx40J7 (100 mA max IGT in quadrants I-III, 2.0 V max VGT at VD = 12 V); peak gate current is limited to 4 A (tp = 20 µs, TJ = 125 °C) and average gate power to 0.5 W."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [+ "extractor flagged: The datasheet's TO-218X (J Package) drawing labels the terminals MT1, MT2 and Gate but does not prin; Q4040J7TP is the 400 V (voltage code 40) Qxx40J7 part in the TO-218X J package, sold in tube packing"+ ],+ "pages_sent": 8,+ "cost_usd": 0.1056,+ "at": "2026-10-19T01:40:07"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8602598405625421824",+ "pages": 8,+ "sha256": "bc762ef3ea031978",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 3,+ "described": 3,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "q4040j7tp.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 14.96,+ 4.82,+ 32.1+ ],+ "zmin_mm": -9.75,+ "centre_offset_mm": 0.76,+ "footprint_binding": "identity",+ "sha256": "5902af0e840d059a64b690533775dc4c47c81ab237d4f0abf3786a32ff1076ec",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "q4040j7tp-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "body on z = 0, through-hole leads below",+ "extents_mm": [+ 14.96,+ 4.82,+ 32.1+ ],+ "zmin_mm": -9.75,+ "centre_offset_mm": 0.76,+ "footprint_binding": "identity",+ "sha256": "0e13665a93c289bbe3909b15f3c9493f687cd1b82cbb1c2e4aa9319848ae8e8b",+ "checked": "2026-10-19",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
q4040j7tp-etched.glbadded⋯ 1 unchanged line ⋯
q4040j7tp-hero.glbadded⋯ 1 unchanged line ⋯
q4040j7tp-hero.overlay.jsonadded+155@@ -0,0 +1,155 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "Q4040J7TP",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 3,+ "span_mm": 13.45,+ "dash_mm": 0.3362,+ "gap_mm": 0.2017,+ "pad_stroke_mm": 0.0807+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 13,+ "pin1": {+ "source": "added dot (AI)",+ "pad": "1",+ "center_mm": [+ -1.8,+ 0.0+ ],+ "r_mm": 0.35+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 3,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 1.076,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -0.599,+ 11.549,+ -0.32,+ 0.319+ ],+ "pads_bbox_mm": [+ -1.25,+ 12.2,+ -1.75,+ 1.75+ ],+ "seating_z_mm": -9.75+ },+ "sources": {+ "glb": "q4040j7tp-etched.glb",+ "glb_sha256": "b1c3c22279f3afbbaaa37e9195d7bdbb180d9c7aa9a311e948d7dea41b338fdd",+ "footprint": "q4040j7tp.kicad_mod",+ "footprint_sha256": "cb270425e92b554c782869b35c6a47198af8bc0b3defb1c90e6ed70b31565951",+ "pins": "page.json component.pins",+ "pins_sha256": "3946d677bc14910cc7b88d37edec28df92e00f3342203664c1c9aad37e480d3d"+ },+ "generator": "adom-wiki 1.7.74 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "MT1",+ "x": -2.3,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "MT2",+ "x": 6.875,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "Gate",+ "x": 12.35,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 2.5,+ 3.5+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "oval",+ "center_mm": [+ 5.475,+ 0.0+ ],+ "size_mm": [+ 2.5,+ 3.5+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "oval",+ "center_mm": [+ 10.95,+ 0.0+ ],+ "size_mm": [+ 2.5,+ 3.5+ ],+ "rot": 0.0+ }+ ]+}
q4040j7tp.glbadded⋯ 1 unchanged line ⋯
q4040j7tp.kicad_modadded+381@@ -0,0 +1,381 @@+(footprint "TO-218-3_Vertical"+ (version 20260206)+ (generator "kicad-footprint-generator")+ (layer "F.Cu")+ (descr "TO-218-3, Vertical, RM 5.475mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf")+ (tags "TO-218-3 Vertical RM 5.475mm SOT-93")+ (property "Reference" "REF**"+ (at 5.48 -4.12 0)+ (layer "F.SilkS")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "TO-218-3_Vertical"+ (at 5.48 2.7 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "KiLib_Generator" "package/TO_SOT/THT"+ (at 0 0 0)+ (layer "F.SilkS")+ (hide yes)+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (attr through_hole)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -2.105 -3.28)+ (end 13.055 -3.28)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -2.105 -1.9)+ (end -1.51 -1.9)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -2.105 1.74)+ (end -2.105 -3.28)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -1.51 1.74)+ (end -2.105 1.74)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 1.51 -1.9)+ (end 3.965 -1.9)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 3.36 -3.28)+ (end 3.36 -1.9)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 3.965 1.74)+ (end 1.51 1.74)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 6.985 -1.9)+ (end 9.44 -1.9)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 7.59 -3.28)+ (end 7.59 -1.9)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 9.44 1.74)+ (end 6.985 1.74)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 12.46 -1.9)+ (end 13.055 -1.9)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 13.055 -3.28)+ (end 13.055 1.74)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start 13.055 1.74)+ (end 12.46 1.74)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ )+ (fp_line+ (start -2.25 -3.42)+ (end 13.2 -3.42)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -2.25 1.88)+ (end -2.25 -3.42)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.5 1.88)+ (end -2.25 1.88)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.5 2)+ (end -1.5 1.88)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.5 1.88)+ (end 1.5 2)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 1.5 2)+ (end -1.5 2)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.97 1.88)+ (end 1.5 1.88)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 3.97 2)+ (end 3.97 1.88)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 6.98 1.88)+ (end 6.98 2)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 6.98 2)+ (end 3.97 2)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 9.45 1.88)+ (end 6.98 1.88)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 9.45 2)+ (end 9.45 1.88)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 12.45 1.88)+ (end 12.45 2)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 12.45 2)+ (end 9.45 2)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 13.2 -3.42)+ (end 13.2 1.88)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start 13.2 1.88)+ (end 12.45 1.88)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ )+ (fp_line+ (start -1.995 -1.9)+ (end 12.945 -1.9)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start 3.36 -3.17)+ (end 3.36 -1.9)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_line+ (start 7.59 -3.17)+ (end 7.59 -1.9)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ )+ (fp_rect+ (start -1.995 -3.17)+ (end 12.945 1.63)+ (stroke+ (width 0.1)+ (type solid)+ )+ (fill no)+ (layer "F.Fab")+ )+ (fp_text user "${REFERENCE}"+ (at 5.48 -0.77 0)+ (layer "F.Fab")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (pad "1" thru_hole rect+ (at 0 0)+ (size 2.5 3.5)+ (drill 1.5)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ )+ (pad "2" thru_hole oval+ (at 5.475 0)+ (size 2.5 3.5)+ (drill 1.5)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ )+ (pad "3" thru_hole oval+ (at 10.95 0)+ (size 2.5 3.5)+ (drill 1.5)+ (layers "*.Cu" "*.Mask")+ (remove_unused_layers no)+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_TO_SOT_THT.3dshapes/TO-218-3_Vertical.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
q4040j7tp.kicad_symadded+25@@ -0,0 +1,25 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "Q4040J7TP" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 5.08 0) (effects (font (size 1.27 1.27))))+ (property "Value" "Q4040J7TP" (at 0 -7.62 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "Q4040J7TP_0_1"+ (rectangle (start -12.70 2.54) (end 12.70 -5.08)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "Q4040J7TP_1_1"+ (pin passive line (at -17.78 0.00 0) (length 5.08)+ (name "MT1" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at -17.78 -2.54 0) (length 5.08)+ (name "MT2" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at 17.78 0.00 180) (length 5.08)+ (name "Gate" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
q4040j7tp.lbradded+117@@ -0,0 +1,117 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="TO-218-3_Vertical">+ <description>3 pads, 13.4 x 3.5 mm. TO-218-3, Vertical, RM 5.475mm, SOT-93, see</description>+ <pad name="1" x="0.0000" y="-0.0000" drill="1.5000" diameter="2.5000" shape="long" rot="R90"/>+ <pad name="2" x="5.4750" y="-0.0000" drill="1.5000" diameter="2.5000" shape="long" rot="R90"/>+ <pad name="3" x="10.9500" y="-0.0000" drill="1.5000" diameter="2.5000" shape="long" rot="R90"/>+ <wire x1="-1.9950" y1="3.1700" x2="12.9450" y2="3.1700" width="0.1000" layer="51"/>+ <wire x1="12.9450" y1="3.1700" x2="12.9450" y2="-1.6300" width="0.1000" layer="51"/>+ <wire x1="12.9450" y1="-1.6300" x2="-1.9950" y2="-1.6300" width="0.1000" layer="51"/>+ <wire x1="-1.9950" y1="-1.6300" x2="-1.9950" y2="3.1700" width="0.1000" layer="51"/>+ <wire x1="-2.1050" y1="3.2800" x2="13.0550" y2="3.2800" width="0.1200" layer="21"/>+ <wire x1="-2.1050" y1="1.9000" x2="-1.5100" y2="1.9000" width="0.1200" layer="21"/>+ <wire x1="-2.1050" y1="-1.7400" x2="-2.1050" y2="3.2800" width="0.1200" layer="21"/>+ <wire x1="-1.5100" y1="-1.7400" x2="-2.1050" y2="-1.7400" width="0.1200" layer="21"/>+ <wire x1="1.5100" y1="1.9000" x2="3.9650" y2="1.9000" width="0.1200" layer="21"/>+ <wire x1="3.3600" y1="3.2800" x2="3.3600" y2="1.9000" width="0.1200" layer="21"/>+ <wire x1="3.9650" y1="-1.7400" x2="1.5100" y2="-1.7400" width="0.1200" layer="21"/>+ <wire x1="6.9850" y1="1.9000" x2="9.4400" y2="1.9000" width="0.1200" layer="21"/>+ <wire x1="7.5900" y1="3.2800" x2="7.5900" y2="1.9000" width="0.1200" layer="21"/>+ <wire x1="9.4400" y1="-1.7400" x2="6.9850" y2="-1.7400" width="0.1200" layer="21"/>+ <wire x1="12.4600" y1="1.9000" x2="13.0550" y2="1.9000" width="0.1200" layer="21"/>+ <wire x1="13.0550" y1="3.2800" x2="13.0550" y2="-1.7400" width="0.1200" layer="21"/>+ <wire x1="13.0550" y1="-1.7400" x2="12.4600" y2="-1.7400" width="0.1200" layer="21"/>+ <wire x1="-1.9950" y1="1.9000" x2="12.9450" y2="1.9000" width="0.1000" layer="51"/>+ <wire x1="3.3600" y1="3.1700" x2="3.3600" y2="1.9000" width="0.1000" layer="51"/>+ <wire x1="7.5900" y1="3.1700" x2="7.5900" y2="1.9000" width="0.1000" layer="51"/>+ <text x="0" y="3.880" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.350" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="Q4040J7TP">+ <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/>+ <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/>+ <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="MT1" x="-17.78" y="0" length="middle" direction="pas"/>+ <pin name="MT2" x="-17.78" y="-2.54" length="middle" direction="pas"/>+ <pin name="Gate" x="17.78" y="0" length="middle" direction="in" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="Q4040J7TP" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="Q4040J7TP" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="TO-218-3_Vertical">+ <connects>+ <connect gate="G$1" pin="MT1" pad="1"/>+ <connect gate="G$1" pin="MT2" pad="2"/>+ <connect gate="G$1" pin="Gate" pad="3"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
q4040j7tp.stepadded+1917@@ -0,0 +1,1917 @@+ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('FreeCAD Model'),'2;1'); +FILE_NAME( +'D:/KiCAD/packages3D-source/Package_TO_SOT_THT.3dshapes\\ +TO-218-3_Vertical.step','2018-04-09T22:10:15',('kicad StepUp'),( + 'ksu MCAD'),'Open CASCADE STEP processor 6.8','FreeCAD','Unknown'); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft', + 'automotive_design',1997,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('TO-218-3_Vertical','TO-218-3_Vertical','',(#8)); +#8 = MECHANICAL_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#1524); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000)); +#13 = DIRECTION('',(0.E+000,0.E+000,1.)); +#14 = DIRECTION('',(1.,0.E+000,-0.E+000)); +#15 = MANIFOLD_SOLID_BREP('',#16); +#16 = CLOSED_SHELL('',(#17,#73,#200,#224,#248,#304,#351,#437,#451,#483, + #547,#572,#604,#668,#693,#725,#789,#814,#854,#905,#938,#955,#1012, + #1069,#1126,#1143,#1160,#1177,#1194,#1211,#1223,#1240,#1257,#1274, + #1291,#1308,#1320,#1337,#1359,#1376,#1393,#1405,#1417,#1461,#1478, + #1495,#1507)); +#17 = ADVANCED_FACE('',(#18),#68,.F.); +#18 = FACE_BOUND('',#19,.T.); +#19 = EDGE_LOOP('',(#20,#30,#38,#46,#54,#62)); +#20 = ORIENTED_EDGE('',*,*,#21,.T.); +#21 = EDGE_CURVE('',#22,#24,#26,.T.); +#22 = VERTEX_POINT('',#23); +#23 = CARTESIAN_POINT('',(-2.005,1.052491427345E-015,2.)); +#24 = VERTEX_POINT('',#25); +#25 = CARTESIAN_POINT('',(-2.005,-1.65,2.05)); +#26 = LINE('',#27,#28); +#27 = CARTESIAN_POINT('',(-2.005,1.052491427345E-015,2.)); +#28 = VECTOR('',#29,1.); +#29 = DIRECTION('',(-3.329140893445E-016,-0.999541179145, + 3.028912664077E-002)); +#30 = ORIENTED_EDGE('',*,*,#31,.T.); +#31 = EDGE_CURVE('',#24,#32,#34,.T.); +#32 = VERTEX_POINT('',#33); +#33 = CARTESIAN_POINT('',(-2.005,-1.65,14.15)); +#34 = LINE('',#35,#36); +#35 = CARTESIAN_POINT('',(-2.005,-1.65,2.05)); +#36 = VECTOR('',#37,1.); +#37 = DIRECTION('',(-4.930380657631E-032,1.110223024625E-016,1.)); +#38 = ORIENTED_EDGE('',*,*,#39,.T.); +#39 = EDGE_CURVE('',#32,#40,#42,.T.); +#40 = VERTEX_POINT('',#41); +#41 = CARTESIAN_POINT('',(-2.005,-1.6,14.2)); +#42 = LINE('',#43,#44); +#43 = CARTESIAN_POINT('',(-2.005,-1.65,14.15)); +#44 = VECTOR('',#45,1.); +#45 = DIRECTION('',(2.355138688026E-016,0.707106781187,0.707106781186)); +#46 = ORIENTED_EDGE('',*,*,#47,.T.); +#47 = EDGE_CURVE('',#40,#48,#50,.T.); +#48 = VERTEX_POINT('',#49); +#49 = CARTESIAN_POINT('',(-2.005,3.15,14.2)); +#50 = LINE('',#51,#52); +#51 = CARTESIAN_POINT('',(-2.005,-1.6,14.2)); +#52 = VECTOR('',#53,1.); +#53 = DIRECTION('',(3.330669073875E-016,1.,-6.162975822039E-032)); +#54 = ORIENTED_EDGE('',*,*,#55,.T.); +#55 = EDGE_CURVE('',#48,#56,#58,.T.); +#56 = VERTEX_POINT('',#57); +#57 = CARTESIAN_POINT('',(-2.005,3.15,2.05)); +#58 = LINE('',#59,#60); +#59 = CARTESIAN_POINT('',(-2.005,3.15,14.2)); +#60 = VECTOR('',#61,1.); +#61 = DIRECTION('',(4.930380657631E-032,-1.110223024625E-016,-1.)); +#62 = ORIENTED_EDGE('',*,*,#63,.T.); +#63 = EDGE_CURVE('',#56,#22,#64,.T.); +#64 = LINE('',#65,#66); +#65 = CARTESIAN_POINT('',(-2.005,3.15,2.05)); +#66 = VECTOR('',#67,1.); +#67 = DIRECTION('',(-3.330249567724E-016,-0.999874047484, + -1.587101662672E-002)); +#68 = PLANE('',#69); +#69 = AXIS2_PLACEMENT_3D('',#70,#71,#72); +#70 = CARTESIAN_POINT('',(-2.005,1.052491427345E-015,2.)); +#71 = DIRECTION('',(1.,-5.360656126915E-016,7.340317518183E-017)); +#72 = DIRECTION('',(6.470879151541E-016,1.,1.110223024625E-016)); +#73 = ADVANCED_FACE('',(#74),#195,.T.); +#74 = FACE_BOUND('',#75,.T.); +#75 = EDGE_LOOP('',(#76,#77,#85,#93,#101,#109,#117,#125,#133,#141,#149, + #157,#165,#173,#181,#189)); +#76 = ORIENTED_EDGE('',*,*,#21,.F.); +#77 = ORIENTED_EDGE('',*,*,#78,.T.); +#78 = EDGE_CURVE('',#22,#79,#81,.T.); +#79 = VERTEX_POINT('',#80); +#80 = CARTESIAN_POINT('',(-0.6,8.965050923848E-016,2.)); +#81 = LINE('',#82,#83); +#82 = CARTESIAN_POINT('',(-2.005,1.052491427345E-015,2.)); +#83 = VECTOR('',#84,1.); +#84 = DIRECTION('',(1.,-1.110223024625E-016,1.665334536938E-016)); +#85 = ORIENTED_EDGE('',*,*,#86,.T.); +#86 = EDGE_CURVE('',#79,#87,#89,.T.); +#87 = VERTEX_POINT('',#88); +#88 = CARTESIAN_POINT('',(-0.6,-0.32,2.009696969697)); +#89 = LINE('',#90,#91); +#90 = CARTESIAN_POINT('',(-0.6,0.133665137615,1.995949541284)); +#91 = VECTOR('',#92,1.); +#92 = DIRECTION('',(0.E+000,-0.999541179145,3.028912664077E-002)); +#93 = ORIENTED_EDGE('',*,*,#94,.T.); +#94 = EDGE_CURVE('',#87,#95,#97,.T.); +#95 = VERTEX_POINT('',#96); +#96 = CARTESIAN_POINT('',(1.15,-0.32,2.009696969697)); +#97 = LINE('',#98,#99); +#98 = CARTESIAN_POINT('',(-1.3025,-0.32,2.009696969697)); +#99 = VECTOR('',#100,1.); +#100 = DIRECTION('',(1.,1.086924826796E-031,1.631691414979E-016)); +#101 = ORIENTED_EDGE('',*,*,#102,.T.); +#102 = EDGE_CURVE('',#95,#103,#105,.T.); +#103 = VERTEX_POINT('',#104); +#104 = CARTESIAN_POINT('',(1.15,7.022160630754E-016,2.)); +#105 = LINE('',#106,#107); +#106 = CARTESIAN_POINT('',(1.15,0.188614678899,1.99428440367)); +#107 = VECTOR('',#108,1.); +#108 = DIRECTION('',(0.E+000,0.999541179145,-3.028912664077E-002)); +#109 = ORIENTED_EDGE('',*,*,#110,.T.); +#110 = EDGE_CURVE('',#103,#111,#113,.T.); +#111 = VERTEX_POINT('',#112); +#112 = CARTESIAN_POINT('',(4.6,3.191891195797E-016,2.)); +#113 = LINE('',#114,#115); +#114 = CARTESIAN_POINT('',(-2.005,1.052491427345E-015,2.)); +#115 = VECTOR('',#116,1.); +#116 = DIRECTION('',(1.,-1.110223024625E-016,1.665334536938E-016)); +#117 = ORIENTED_EDGE('',*,*,#118,.T.); +#118 = EDGE_CURVE('',#111,#119,#121,.T.); +#119 = VERTEX_POINT('',#120); +#120 = CARTESIAN_POINT('',(4.6,-0.32,2.009696969697)); +#121 = LINE('',#122,#123); +#122 = CARTESIAN_POINT('',(4.6,0.133665137615,1.995949541284)); +#123 = VECTOR('',#124,1.); +#124 = DIRECTION('',(0.E+000,-0.999541179145,3.028912664077E-002)); +#125 = ORIENTED_EDGE('',*,*,#126,.F.); +#126 = EDGE_CURVE('',#127,#119,#129,.T.); +#127 = VERTEX_POINT('',#128); +#128 = CARTESIAN_POINT('',(6.35,-0.32,2.009696969697)); +#129 = LINE('',#130,#131); +#130 = CARTESIAN_POINT('',(1.2975,-0.32,2.009696969697)); +#131 = VECTOR('',#132,1.); +#132 = DIRECTION('',(-1.,-1.086924826796E-031,-1.631691414979E-016)); +#133 = ORIENTED_EDGE('',*,*,#134,.T.); +#134 = EDGE_CURVE('',#127,#135,#137,.T.); +#135 = VERTEX_POINT('',#136); +#136 = CARTESIAN_POINT('',(6.35,1.249000902703E-016,2.)); +#137 = LINE('',#138,#139); +#138 = CARTESIAN_POINT('',(6.35,0.188614678899,1.99428440367)); +#139 = VECTOR('',#140,1.); +#140 = DIRECTION('',(0.E+000,0.999541179145,-3.028912664077E-002)); +#141 = ORIENTED_EDGE('',*,*,#142,.T.); +#142 = EDGE_CURVE('',#135,#143,#145,.T.); +#143 = VERTEX_POINT('',#144); +#144 = CARTESIAN_POINT('',(9.8,-2.581268532253E-016,2.)); +#145 = LINE('',#146,#147); +#146 = CARTESIAN_POINT('',(-2.005,1.052491427345E-015,2.)); +#147 = VECTOR('',#148,1.); +#148 = DIRECTION('',(1.,-1.110223024625E-016,1.665334536938E-016)); +#149 = ORIENTED_EDGE('',*,*,#150,.T.); +#150 = EDGE_CURVE('',#143,#151,#153,.T.); +#151 = VERTEX_POINT('',#152); +#152 = CARTESIAN_POINT('',(9.8,-0.32,2.009696969697)); +#153 = LINE('',#154,#155); +#154 = CARTESIAN_POINT('',(9.8,0.133665137615,1.995949541284)); +#155 = VECTOR('',#156,1.); +#156 = DIRECTION('',(0.E+000,-0.999541179145,3.028912664077E-002)); +#157 = ORIENTED_EDGE('',*,*,#158,.F.); +#158 = EDGE_CURVE('',#159,#151,#161,.T.); +#159 = VERTEX_POINT('',#160); +#160 = CARTESIAN_POINT('',(11.55,-0.32,2.009696969697)); +#161 = LINE('',#162,#163); +#162 = CARTESIAN_POINT('',(3.8975,-0.32,2.009696969697)); +#163 = VECTOR('',#164,1.); +#164 = DIRECTION('',(-1.,-1.03546939308E-031,-1.631691414979E-016)); +#165 = ORIENTED_EDGE('',*,*,#166,.T.); +#166 = EDGE_CURVE('',#159,#167,#169,.T.); +#167 = VERTEX_POINT('',#168); +#168 = CARTESIAN_POINT('',(11.55,-4.524158825348E-016,2.)); +#169 = LINE('',#170,#171); +#170 = CARTESIAN_POINT('',(11.55,0.188614678899,1.99428440367)); +#171 = VECTOR('',#172,1.); +#172 = DIRECTION('',(0.E+000,0.999541179145,-3.028912664077E-002)); +#173 = ORIENTED_EDGE('',*,*,#174,.T.); +#174 = EDGE_CURVE('',#167,#175,#177,.T.); +#175 = VERTEX_POINT('',#176); +#176 = CARTESIAN_POINT('',(12.955,-6.084022174946E-016,2.)); +#177 = LINE('',#178,#179); +#178 = CARTESIAN_POINT('',(-2.005,1.052491427345E-015,2.)); +#179 = VECTOR('',#180,1.); +#180 = DIRECTION('',(1.,-1.110223024625E-016,1.665334536938E-016)); +#181 = ORIENTED_EDGE('',*,*,#182,.T.); +#182 = EDGE_CURVE('',#175,#183,#185,.T.); +#183 = VERTEX_POINT('',#184); +#184 = CARTESIAN_POINT('',(12.955,-1.65,2.05)); +#185 = LINE('',#186,#187); +#186 = CARTESIAN_POINT('',(12.955,-6.084022174946E-016,2.)); +#187 = VECTOR('',#188,1.); +#188 = DIRECTION('',(-3.329140893445E-016,-0.999541179145, + 3.028912664077E-002)); +#189 = ORIENTED_EDGE('',*,*,#190,.F.); +#190 = EDGE_CURVE('',#24,#183,#191,.T.); +#191 = LINE('',#192,#193); +#192 = CARTESIAN_POINT('',(-2.005,-1.65,2.05)); +#193 = VECTOR('',#194,1.); +#194 = DIRECTION('',(1.,-1.110223024625E-016,1.665334536938E-016)); +#195 = PLANE('',#196); +#196 = AXIS2_PLACEMENT_3D('',#197,#198,#199); +#197 = CARTESIAN_POINT('',(-2.005,1.052491427345E-015,2.)); +#198 = DIRECTION('',(1.63094276093E-016,-3.028912664077E-002, + -0.999541179145)); +#199 = DIRECTION('',(-3.329140893445E-016,-0.999541179145, + 3.028912664077E-002)); +#200 = ADVANCED_FACE('',(#201),#219,.T.); +#201 = FACE_BOUND('',#202,.T.); +#202 = EDGE_LOOP('',(#203,#204,#212,#218)); +#203 = ORIENTED_EDGE('',*,*,#190,.T.); +#204 = ORIENTED_EDGE('',*,*,#205,.T.); +#205 = EDGE_CURVE('',#183,#206,#208,.T.); +#206 = VERTEX_POINT('',#207); +#207 = CARTESIAN_POINT('',(12.955,-1.65,14.15)); +#208 = LINE('',#209,#210); +#209 = CARTESIAN_POINT('',(12.955,-1.65,2.05)); +#210 = VECTOR('',#211,1.); +#211 = DIRECTION('',(-4.930380657631E-032,1.110223024625E-016,1.)); +#212 = ORIENTED_EDGE('',*,*,#213,.F.); +#213 = EDGE_CURVE('',#32,#206,#214,.T.); +#214 = LINE('',#215,#216); +#215 = CARTESIAN_POINT('',(-2.005,-1.65,14.15)); +#216 = VECTOR('',#217,1.); +#217 = DIRECTION('',(1.,-1.110223024625E-016,1.665334536938E-016)); +#218 = ORIENTED_EDGE('',*,*,#31,.F.); +#219 = PLANE('',#220); +#220 = AXIS2_PLACEMENT_3D('',#221,#222,#223); +#221 = CARTESIAN_POINT('',(-2.005,-1.65,2.05)); +#222 = DIRECTION('',(-1.110223024625E-016,-1.,1.110223024625E-016)); +#223 = DIRECTION('',(-8.628166150855E-032,1.110223024625E-016,1.)); +#224 = ADVANCED_FACE('',(#225),#243,.T.); +#225 = FACE_BOUND('',#226,.T.); +#226 = EDGE_LOOP('',(#227,#228,#236,#242)); +#227 = ORIENTED_EDGE('',*,*,#213,.T.); +#228 = ORIENTED_EDGE('',*,*,#229,.T.); +#229 = EDGE_CURVE('',#206,#230,#232,.T.); +#230 = VERTEX_POINT('',#231); +#231 = CARTESIAN_POINT('',(12.955,-1.6,14.2)); +#232 = LINE('',#233,#234); +#233 = CARTESIAN_POINT('',(12.955,-1.65,14.15)); +#234 = VECTOR('',#235,1.); +#235 = DIRECTION('',(2.355138688026E-016,0.707106781187,0.707106781186) + ); +#236 = ORIENTED_EDGE('',*,*,#237,.F.); +#237 = EDGE_CURVE('',#40,#230,#238,.T.); +#238 = LINE('',#239,#240); +#239 = CARTESIAN_POINT('',(-2.005,-1.6,14.2)); +#240 = VECTOR('',#241,1.); +#241 = DIRECTION('',(1.,-1.110223024625E-016,1.665334536938E-016)); +#242 = ORIENTED_EDGE('',*,*,#39,.F.); +#243 = PLANE('',#244); +#244 = AXIS2_PLACEMENT_3D('',#245,#246,#247); +#245 = CARTESIAN_POINT('',(-2.005,-1.65,14.15)); +#246 = DIRECTION('',(-1.962615573355E-016,-0.707106781186,0.707106781187 + )); +#247 = DIRECTION('',(2.355138688026E-016,0.707106781187,0.707106781186) + ); +#248 = ADVANCED_FACE('',(#249),#299,.T.); +#249 = FACE_BOUND('',#250,.T.); +#250 = EDGE_LOOP('',(#251,#252,#253,#261,#269,#277,#285,#293)); +#251 = ORIENTED_EDGE('',*,*,#47,.F.); +#252 = ORIENTED_EDGE('',*,*,#237,.T.); +#253 = ORIENTED_EDGE('',*,*,#254,.T.); +#254 = EDGE_CURVE('',#230,#255,#257,.T.); +#255 = VERTEX_POINT('',#256); +#256 = CARTESIAN_POINT('',(12.955,3.15,14.2)); +#257 = LINE('',#258,#259); +#258 = CARTESIAN_POINT('',(12.955,-1.6,14.2)); +#259 = VECTOR('',#260,1.); +#260 = DIRECTION('',(3.330669073875E-016,1.,-6.162975822039E-032)); +#261 = ORIENTED_EDGE('',*,*,#262,.F.); +#262 = EDGE_CURVE('',#263,#255,#265,.T.); +#263 = VERTEX_POINT('',#264); +#264 = CARTESIAN_POINT('',(12.945,3.15,14.2)); +#265 = LINE('',#266,#267); +#266 = CARTESIAN_POINT('',(-2.005,3.15,14.2)); +#267 = VECTOR('',#268,1.); +#268 = DIRECTION('',(1.,-1.110223024625E-016,1.665334536938E-016)); +#269 = ORIENTED_EDGE('',*,*,#270,.F.); +#270 = EDGE_CURVE('',#271,#263,#273,.T.); +#271 = VERTEX_POINT('',#272); +#272 = CARTESIAN_POINT('',(12.945,1.9,14.2)); +#273 = LINE('',#274,#275); +#274 = CARTESIAN_POINT('',(12.945,0.785,14.2)); +#275 = VECTOR('',#276,1.); +#276 = DIRECTION('',(0.E+000,1.,-1.232595164408E-031)); +#277 = ORIENTED_EDGE('',*,*,#278,.F.); +#278 = EDGE_CURVE('',#279,#271,#281,.T.); +#279 = VERTEX_POINT('',#280); +#280 = CARTESIAN_POINT('',(-1.995,1.9,14.2)); +#281 = LINE('',#282,#283); +#282 = CARTESIAN_POINT('',(5.47,1.9,14.2)); +#283 = VECTOR('',#284,1.); +#284 = DIRECTION('',(1.,0.E+000,1.665334536938E-016)); +#285 = ORIENTED_EDGE('',*,*,#286,.F.); +#286 = EDGE_CURVE('',#287,#279,#289,.T.); +#287 = VERTEX_POINT('',#288); +#288 = CARTESIAN_POINT('',(-1.995,3.15,14.2)); +#289 = LINE('',#290,#291); +#290 = CARTESIAN_POINT('',(-1.995,0.15,14.2)); +#291 = VECTOR('',#292,1.); +#292 = DIRECTION('',(0.E+000,-1.,1.232595164408E-031)); +#293 = ORIENTED_EDGE('',*,*,#294,.F.); +#294 = EDGE_CURVE('',#48,#287,#295,.T.); +#295 = LINE('',#296,#297); +#296 = CARTESIAN_POINT('',(-2.005,3.15,14.2)); +#297 = VECTOR('',#298,1.); +#298 = DIRECTION('',(1.,-1.110223024625E-016,1.665334536938E-016)); +#299 = PLANE('',#300); +#300 = AXIS2_PLACEMENT_3D('',#301,#302,#303); +#301 = CARTESIAN_POINT('',(-2.005,-1.6,14.2)); +#302 = DIRECTION('',(-1.665334536938E-016,1.232595164408E-031,1.)); +#303 = DIRECTION('',(3.330669073875E-016,1.,-7.395570986447E-032)); +#304 = ADVANCED_FACE('',(#305),#346,.T.); +#305 = FACE_BOUND('',#306,.T.); +#306 = EDGE_LOOP('',(#307,#308,#309,#317,#325,#331,#332,#340)); +#307 = ORIENTED_EDGE('',*,*,#55,.F.); +#308 = ORIENTED_EDGE('',*,*,#294,.T.); +#309 = ORIENTED_EDGE('',*,*,#310,.F.); +#310 = EDGE_CURVE('',#311,#287,#313,.T.); +#311 = VERTEX_POINT('',#312); +#312 = CARTESIAN_POINT('',(-1.995,3.15,3.)); +#313 = LINE('',#314,#315); +#314 = CARTESIAN_POINT('',(-1.995,3.15,8.6)); +#315 = VECTOR('',#316,1.); +#316 = DIRECTION('',(0.E+000,1.110223024625E-016,1.)); +#317 = ORIENTED_EDGE('',*,*,#318,.T.); +#318 = EDGE_CURVE('',#311,#319,#321,.T.); +#319 = VERTEX_POINT('',#320); +#320 = CARTESIAN_POINT('',(12.945,3.15,3.)); +#321 = LINE('',#322,#323); +#322 = CARTESIAN_POINT('',(-2.,3.15,3.)); +#323 = VECTOR('',#324,1.); +#324 = DIRECTION('',(1.,-1.110223024625E-016,0.E+000)); +#325 = ORIENTED_EDGE('',*,*,#326,.F.); +#326 = EDGE_CURVE('',#263,#319,#327,.T.); +#327 = LINE('',#328,#329); +#328 = CARTESIAN_POINT('',(12.945,3.15,8.6)); +#329 = VECTOR('',#330,1.); +#330 = DIRECTION('',(0.E+000,-1.110223024625E-016,-1.)); +#331 = ORIENTED_EDGE('',*,*,#262,.T.); +#332 = ORIENTED_EDGE('',*,*,#333,.T.); +#333 = EDGE_CURVE('',#255,#334,#336,.T.); +#334 = VERTEX_POINT('',#335); +#335 = CARTESIAN_POINT('',(12.955,3.15,2.05)); +#336 = LINE('',#337,#338); +#337 = CARTESIAN_POINT('',(12.955,3.15,14.2)); +#338 = VECTOR('',#339,1.); +#339 = DIRECTION('',(4.930380657631E-032,-1.110223024625E-016,-1.)); +#340 = ORIENTED_EDGE('',*,*,#341,.F.); +#341 = EDGE_CURVE('',#56,#334,#342,.T.); +#342 = LINE('',#343,#344); +#343 = CARTESIAN_POINT('',(-2.005,3.15,2.05)); +#344 = VECTOR('',#345,1.); +#345 = DIRECTION('',(1.,-1.110223024625E-016,1.665334536938E-016)); +#346 = PLANE('',#347); +#347 = AXIS2_PLACEMENT_3D('',#348,#349,#350); +#348 = CARTESIAN_POINT('',(-2.005,3.15,14.2)); +#349 = DIRECTION('',(1.110223024625E-016,1.,-1.110223024625E-016)); +#350 = DIRECTION('',(8.628166150855E-032,-1.110223024625E-016,-1.)); +#351 = ADVANCED_FACE('',(#352),#432,.T.); +#352 = FACE_BOUND('',#353,.T.); +#353 = EDGE_LOOP('',(#354,#355,#356,#362,#363,#371,#379,#385,#386,#394, + #402,#408,#409,#417,#425,#431)); +#354 = ORIENTED_EDGE('',*,*,#63,.F.); +#355 = ORIENTED_EDGE('',*,*,#341,.T.); +#356 = ORIENTED_EDGE('',*,*,#357,.T.); +#357 = EDGE_CURVE('',#334,#175,#358,.T.); +#358 = LINE('',#359,#360); +#359 = CARTESIAN_POINT('',(12.955,3.15,2.05)); +#360 = VECTOR('',#361,1.); +#361 = DIRECTION('',(-3.330249567724E-016,-0.999874047484, + -1.587101662672E-002)); +#362 = ORIENTED_EDGE('',*,*,#174,.F.); +#363 = ORIENTED_EDGE('',*,*,#364,.T.); +#364 = EDGE_CURVE('',#167,#365,#367,.T.); +#365 = VERTEX_POINT('',#366); +#366 = CARTESIAN_POINT('',(11.55,0.32,2.005079365079)); +#367 = LINE('',#368,#369); +#368 = CARTESIAN_POINT('',(11.55,1.719884130982,2.027299748111)); +#369 = VECTOR('',#370,1.); +#370 = DIRECTION('',(0.E+000,0.999874047484,1.587101662672E-002)); +#371 = ORIENTED_EDGE('',*,*,#372,.T.); +#372 = EDGE_CURVE('',#365,#373,#375,.T.); +#373 = VERTEX_POINT('',#374); +#374 = CARTESIAN_POINT('',(9.8,0.32,2.005079365079)); +#375 = LINE('',#376,#377); +#376 = CARTESIAN_POINT('',(3.8975,0.32,2.005079365079)); +#377 = VECTOR('',#378,1.); +#378 = DIRECTION('',(-1.,-1.069619215817E-031,-1.68295712463E-016)); +#379 = ORIENTED_EDGE('',*,*,#380,.T.); +#380 = EDGE_CURVE('',#373,#143,#381,.T.); +#381 = LINE('',#382,#383); +#382 = CARTESIAN_POINT('',(9.8,1.748686397985,2.027756926952)); +#383 = VECTOR('',#384,1.); +#384 = DIRECTION('',(0.E+000,-0.999874047484,-1.587101662672E-002)); +#385 = ORIENTED_EDGE('',*,*,#142,.F.); +#386 = ORIENTED_EDGE('',*,*,#387,.T.); +#387 = EDGE_CURVE('',#135,#388,#390,.T.); +#388 = VERTEX_POINT('',#389); +#389 = CARTESIAN_POINT('',(6.35,0.32,2.005079365079)); +#390 = LINE('',#391,#392); +#391 = CARTESIAN_POINT('',(6.35,1.719884130982,2.027299748111)); +#392 = VECTOR('',#393,1.); +#393 = DIRECTION('',(0.E+000,0.999874047484,1.587101662672E-002)); +#394 = ORIENTED_EDGE('',*,*,#395,.T.); +#395 = EDGE_CURVE('',#388,#396,#398,.T.); +#396 = VERTEX_POINT('',#397); +#397 = CARTESIAN_POINT('',(4.6,0.32,2.005079365079)); +#398 = LINE('',#399,#400); +#399 = CARTESIAN_POINT('',(1.2975,0.32,2.005079365079)); +#400 = VECTOR('',#401,1.); +#401 = DIRECTION('',(-1.,-1.121074649533E-031,-1.68295712463E-016)); +#402 = ORIENTED_EDGE('',*,*,#403,.T.); +#403 = EDGE_CURVE('',#396,#111,#404,.T.); +#404 = LINE('',#405,#406); +#405 = CARTESIAN_POINT('',(4.6,1.748686397985,2.027756926952)); +#406 = VECTOR('',#407,1.); +#407 = DIRECTION('',(0.E+000,-0.999874047484,-1.587101662672E-002)); +#408 = ORIENTED_EDGE('',*,*,#110,.F.); +#409 = ORIENTED_EDGE('',*,*,#410,.T.); +#410 = EDGE_CURVE('',#103,#411,#413,.T.); +#411 = VERTEX_POINT('',#412); +#412 = CARTESIAN_POINT('',(1.15,0.32,2.005079365079)); +#413 = LINE('',#414,#415); +#414 = CARTESIAN_POINT('',(1.15,1.719884130982,2.027299748111)); +#415 = VECTOR('',#416,1.); +#416 = DIRECTION('',(0.E+000,0.999874047484,1.587101662672E-002)); +#417 = ORIENTED_EDGE('',*,*,#418,.F.); +#418 = EDGE_CURVE('',#419,#411,#421,.T.); +#419 = VERTEX_POINT('',#420); +#420 = CARTESIAN_POINT('',(-0.6,0.32,2.005079365079)); +#421 = LINE('',#422,#423); +#422 = CARTESIAN_POINT('',(-1.3025,0.32,2.005079365079)); +#423 = VECTOR('',#424,1.); +#424 = DIRECTION('',(1.,1.121074649533E-031,1.68295712463E-016)); +#425 = ORIENTED_EDGE('',*,*,#426,.T.); +#426 = EDGE_CURVE('',#419,#79,#427,.T.); +#427 = LINE('',#428,#429); +#428 = CARTESIAN_POINT('',(-0.6,1.748686397985,2.027756926952)); +#429 = VECTOR('',#430,1.); +#430 = DIRECTION('',(0.E+000,-0.999874047484,-1.587101662672E-002)); +#431 = ORIENTED_EDGE('',*,*,#78,.F.); +#432 = PLANE('',#433); +#433 = AXIS2_PLACEMENT_3D('',#434,#435,#436); +#434 = CARTESIAN_POINT('',(-2.005,3.15,2.05)); +#435 = DIRECTION('',(1.682745151945E-016,1.587101662672E-002, + -0.999874047484)); +#436 = DIRECTION('',(-3.330249567724E-016,-0.999874047484, + -1.587101662672E-002)); +#437 = ADVANCED_FACE('',(#438),#446,.T.); +#438 = FACE_BOUND('',#439,.F.); +#439 = EDGE_LOOP('',(#440,#441,#442,#443,#444,#445)); +#440 = ORIENTED_EDGE('',*,*,#182,.T.); +#441 = ORIENTED_EDGE('',*,*,#205,.T.); +#442 = ORIENTED_EDGE('',*,*,#229,.T.); +#443 = ORIENTED_EDGE('',*,*,#254,.T.); +#444 = ORIENTED_EDGE('',*,*,#333,.T.); +#445 = ORIENTED_EDGE('',*,*,#357,.T.); +#446 = PLANE('',#447); +#447 = AXIS2_PLACEMENT_3D('',#448,#449,#450); +#448 = CARTESIAN_POINT('',(12.955,-6.084022174946E-016,2.)); +#449 = DIRECTION('',(1.,-5.360656126915E-016,7.340317518183E-017)); +#450 = DIRECTION('',(6.470879151541E-016,1.,1.110223024625E-016)); +#451 = ADVANCED_FACE('',(#452),#478,.F.); +#452 = FACE_BOUND('',#453,.F.); +#453 = EDGE_LOOP('',(#454,#462,#470,#476,#477)); +#454 = ORIENTED_EDGE('',*,*,#455,.F.); +#455 = EDGE_CURVE('',#456,#365,#458,.T.); +#456 = VERTEX_POINT('',#457); +#457 = CARTESIAN_POINT('',(11.55,0.32,1.E-001)); +#458 = LINE('',#459,#460); +#459 = CARTESIAN_POINT('',(11.55,0.32,1.E-001)); +#460 = VECTOR('',#461,1.); +#461 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#462 = ORIENTED_EDGE('',*,*,#463,.T.); +#463 = EDGE_CURVE('',#456,#464,#466,.T.); +#464 = VERTEX_POINT('',#465); +#465 = CARTESIAN_POINT('',(11.55,-0.32,1.E-001)); +#466 = LINE('',#467,#468); +#467 = CARTESIAN_POINT('',(11.55,0.32,1.E-001)); +#468 = VECTOR('',#469,1.); +#469 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#470 = ORIENTED_EDGE('',*,*,#471,.T.); +#471 = EDGE_CURVE('',#464,#159,#472,.T.); +#472 = LINE('',#473,#474); +#473 = CARTESIAN_POINT('',(11.55,-0.32,1.E-001)); +#474 = VECTOR('',#475,1.); +#475 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#476 = ORIENTED_EDGE('',*,*,#166,.T.); +#477 = ORIENTED_EDGE('',*,*,#364,.T.); +#478 = PLANE('',#479); +#479 = AXIS2_PLACEMENT_3D('',#480,#481,#482); +#480 = CARTESIAN_POINT('',(11.55,0.32,1.E-001)); +#481 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#482 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#483 = ADVANCED_FACE('',(#484),#542,.T.); +#484 = FACE_BOUND('',#485,.T.); +#485 = EDGE_LOOP('',(#486,#494,#502,#510,#518,#526,#534,#540,#541)); +#486 = ORIENTED_EDGE('',*,*,#487,.T.); +#487 = EDGE_CURVE('',#151,#488,#490,.T.); +#488 = VERTEX_POINT('',#489); +#489 = CARTESIAN_POINT('',(9.8,-0.32,1.E-001)); +#490 = LINE('',#491,#492); +#491 = CARTESIAN_POINT('',(9.8,-0.32,3.73)); +#492 = VECTOR('',#493,1.); +#493 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#494 = ORIENTED_EDGE('',*,*,#495,.T.); +#495 = EDGE_CURVE('',#488,#496,#498,.T.); +#496 = VERTEX_POINT('',#497); +#497 = CARTESIAN_POINT('',(10.35,-0.32,1.42108547152E-016)); +#498 = LINE('',#499,#500); +#499 = CARTESIAN_POINT('',(9.8,-0.32,1.E-001)); +#500 = VECTOR('',#501,1.); +#501 = DIRECTION('',(0.9838699101,-1.191616393559E-016,-0.1788854382)); +#502 = ORIENTED_EDGE('',*,*,#503,.T.); +#503 = EDGE_CURVE('',#496,#504,#506,.T.); +#504 = VERTEX_POINT('',#505); +#505 = CARTESIAN_POINT('',(10.35,-0.32,-8.71076951546)); +#506 = LINE('',#507,#508); +#507 = CARTESIAN_POINT('',(10.35,-0.32,1.42108547152E-016)); +#508 = VECTOR('',#509,1.); +#509 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#510 = ORIENTED_EDGE('',*,*,#511,.T.); +#511 = EDGE_CURVE('',#504,#512,#514,.T.); +#512 = VERTEX_POINT('',#513); +#513 = CARTESIAN_POINT('',(10.95,-0.32,-9.75)); +#514 = LINE('',#515,#516); +#515 = CARTESIAN_POINT('',(10.35,-0.32,-8.71076951546)); +#516 = VECTOR('',#517,1.); +#517 = DIRECTION('',(0.5,-5.768888059149E-016,-0.866025403784)); +#518 = ORIENTED_EDGE('',*,*,#519,.T.); +#519 = EDGE_CURVE('',#512,#520,#522,.T.); +#520 = VERTEX_POINT('',#521); +#521 = CARTESIAN_POINT('',(11.55,-0.32,-8.71076951546)); +#522 = LINE('',#523,#524); +#523 = CARTESIAN_POINT('',(10.95,-0.32,-9.75)); +#524 = VECTOR('',#525,1.); +#525 = DIRECTION('',(0.5,5.768888059149E-016,0.866025403784)); +#526 = ORIENTED_EDGE('',*,*,#527,.T.); +#527 = EDGE_CURVE('',#520,#528,#530,.T.); +#528 = VERTEX_POINT('',#529); +#529 = CARTESIAN_POINT('',(11.55,-0.32,1.42108547152E-016)); +#530 = LINE('',#531,#532); +#531 = CARTESIAN_POINT('',(11.55,-0.32,-8.71076951546)); +#532 = VECTOR('',#533,1.); +#533 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#534 = ORIENTED_EDGE('',*,*,#535,.T.); +#535 = EDGE_CURVE('',#528,#464,#536,.T.); +#536 = LINE('',#537,#538); +#537 = CARTESIAN_POINT('',(11.55,-0.32,1.42108547152E-016)); +#538 = VECTOR('',#539,1.); +#539 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#540 = ORIENTED_EDGE('',*,*,#471,.T.); +#541 = ORIENTED_EDGE('',*,*,#158,.T.); +#542 = PLANE('',#543); +#543 = AXIS2_PLACEMENT_3D('',#544,#545,#546); +#544 = CARTESIAN_POINT('',(9.8,-0.32,1.E-001)); +#545 = DIRECTION('',(-5.145543371634E-033,-1.,6.661338147751E-016)); +#546 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#547 = ADVANCED_FACE('',(#548),#567,.F.); +#548 = FACE_BOUND('',#549,.F.); +#549 = EDGE_LOOP('',(#550,#558,#559,#560,#561)); +#550 = ORIENTED_EDGE('',*,*,#551,.F.); +#551 = EDGE_CURVE('',#373,#552,#554,.T.); +#552 = VERTEX_POINT('',#553); +#553 = CARTESIAN_POINT('',(9.8,0.32,1.E-001)); +#554 = LINE('',#555,#556); +#555 = CARTESIAN_POINT('',(9.8,0.32,3.73)); +#556 = VECTOR('',#557,1.); +#557 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#558 = ORIENTED_EDGE('',*,*,#380,.T.); +#559 = ORIENTED_EDGE('',*,*,#150,.T.); +#560 = ORIENTED_EDGE('',*,*,#487,.T.); +#561 = ORIENTED_EDGE('',*,*,#562,.F.); +#562 = EDGE_CURVE('',#552,#488,#563,.T.); +#563 = LINE('',#564,#565); +#564 = CARTESIAN_POINT('',(9.8,0.32,1.E-001)); +#565 = VECTOR('',#566,1.); +#566 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#567 = PLANE('',#568); +#568 = AXIS2_PLACEMENT_3D('',#569,#570,#571); +#569 = CARTESIAN_POINT('',(9.8,0.32,3.73)); +#570 = DIRECTION('',(1.,0.E+000,0.E+000)); +#571 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#572 = ADVANCED_FACE('',(#573),#599,.F.); +#573 = FACE_BOUND('',#574,.F.); +#574 = EDGE_LOOP('',(#575,#583,#591,#597,#598)); +#575 = ORIENTED_EDGE('',*,*,#576,.F.); +#576 = EDGE_CURVE('',#577,#388,#579,.T.); +#577 = VERTEX_POINT('',#578); +#578 = CARTESIAN_POINT('',(6.35,0.32,1.E-001)); +#579 = LINE('',#580,#581); +#580 = CARTESIAN_POINT('',(6.35,0.32,1.E-001)); +#581 = VECTOR('',#582,1.); +#582 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#583 = ORIENTED_EDGE('',*,*,#584,.T.); +#584 = EDGE_CURVE('',#577,#585,#587,.T.); +#585 = VERTEX_POINT('',#586); +#586 = CARTESIAN_POINT('',(6.35,-0.32,1.E-001)); +#587 = LINE('',#588,#589); +#588 = CARTESIAN_POINT('',(6.35,0.32,1.E-001)); +#589 = VECTOR('',#590,1.); +#590 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#591 = ORIENTED_EDGE('',*,*,#592,.T.); +#592 = EDGE_CURVE('',#585,#127,#593,.T.); +#593 = LINE('',#594,#595); +#594 = CARTESIAN_POINT('',(6.35,-0.32,1.E-001)); +#595 = VECTOR('',#596,1.); +#596 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#597 = ORIENTED_EDGE('',*,*,#134,.T.); +#598 = ORIENTED_EDGE('',*,*,#387,.T.); +#599 = PLANE('',#600); +#600 = AXIS2_PLACEMENT_3D('',#601,#602,#603); +#601 = CARTESIAN_POINT('',(6.35,0.32,1.E-001)); +#602 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#603 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#604 = ADVANCED_FACE('',(#605),#663,.T.); +#605 = FACE_BOUND('',#606,.T.); +#606 = EDGE_LOOP('',(#607,#615,#623,#631,#639,#647,#655,#661,#662)); +#607 = ORIENTED_EDGE('',*,*,#608,.T.); +#608 = EDGE_CURVE('',#119,#609,#611,.T.); +#609 = VERTEX_POINT('',#610); +#610 = CARTESIAN_POINT('',(4.6,-0.32,1.E-001)); +#611 = LINE('',#612,#613); +#612 = CARTESIAN_POINT('',(4.6,-0.32,3.73)); +#613 = VECTOR('',#614,1.); +#614 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#615 = ORIENTED_EDGE('',*,*,#616,.T.); +#616 = EDGE_CURVE('',#609,#617,#619,.T.); +#617 = VERTEX_POINT('',#618); +#618 = CARTESIAN_POINT('',(4.875,-0.32,1.42108547152E-016)); +#619 = LINE('',#620,#621); +#620 = CARTESIAN_POINT('',(4.6,-0.32,1.E-001)); +#621 = VECTOR('',#622,1.); +#622 = DIRECTION('',(0.939793423488,-2.276466102869E-016,-0.341743063087 + )); +#623 = ORIENTED_EDGE('',*,*,#624,.T.); +#624 = EDGE_CURVE('',#617,#625,#627,.T.); +#625 = VERTEX_POINT('',#626); +#626 = CARTESIAN_POINT('',(4.875,-0.32,-8.71076951546)); +#627 = LINE('',#628,#629); +#628 = CARTESIAN_POINT('',(4.875,-0.32,1.42108547152E-016)); +#629 = VECTOR('',#630,1.); +#630 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#631 = ORIENTED_EDGE('',*,*,#632,.T.); +#632 = EDGE_CURVE('',#625,#633,#635,.T.); +#633 = VERTEX_POINT('',#634); +#634 = CARTESIAN_POINT('',(5.475,-0.32,-9.75)); +#635 = LINE('',#636,#637); +#636 = CARTESIAN_POINT('',(4.875,-0.32,-8.71076951546)); +#637 = VECTOR('',#638,1.); +#638 = DIRECTION('',(0.5,-5.768888059149E-016,-0.866025403784)); +#639 = ORIENTED_EDGE('',*,*,#640,.T.); +#640 = EDGE_CURVE('',#633,#641,#643,.T.); +#641 = VERTEX_POINT('',#642); +#642 = CARTESIAN_POINT('',(6.075,-0.32,-8.71076951546)); +#643 = LINE('',#644,#645); +#644 = CARTESIAN_POINT('',(5.475,-0.32,-9.75)); +#645 = VECTOR('',#646,1.); +#646 = DIRECTION('',(0.5,5.768888059149E-016,0.866025403784)); +#647 = ORIENTED_EDGE('',*,*,#648,.T.); +#648 = EDGE_CURVE('',#641,#649,#651,.T.); +#649 = VERTEX_POINT('',#650); +#650 = CARTESIAN_POINT('',(6.075,-0.32,1.42108547152E-016)); +#651 = LINE('',#652,#653); +#652 = CARTESIAN_POINT('',(6.075,-0.32,-8.71076951546)); +#653 = VECTOR('',#654,1.); +#654 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#655 = ORIENTED_EDGE('',*,*,#656,.T.); +#656 = EDGE_CURVE('',#649,#585,#657,.T.); +#657 = LINE('',#658,#659); +#658 = CARTESIAN_POINT('',(6.075,-0.32,1.42108547152E-016)); +#659 = VECTOR('',#660,1.); +#660 = DIRECTION('',(0.939793423488,2.276466102869E-016,0.341743063087) + ); +#661 = ORIENTED_EDGE('',*,*,#592,.T.); +#662 = ORIENTED_EDGE('',*,*,#126,.T.); +#663 = PLANE('',#664); +#664 = AXIS2_PLACEMENT_3D('',#665,#666,#667); +#665 = CARTESIAN_POINT('',(4.6,-0.32,1.E-001)); +#666 = DIRECTION('',(0.E+000,-1.,6.661338147751E-016)); +#667 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#668 = ADVANCED_FACE('',(#669),#688,.F.); +#669 = FACE_BOUND('',#670,.F.); +#670 = EDGE_LOOP('',(#671,#679,#680,#681,#682)); +#671 = ORIENTED_EDGE('',*,*,#672,.F.); +#672 = EDGE_CURVE('',#396,#673,#675,.T.); +#673 = VERTEX_POINT('',#674); +#674 = CARTESIAN_POINT('',(4.6,0.32,1.E-001)); +#675 = LINE('',#676,#677); +#676 = CARTESIAN_POINT('',(4.6,0.32,3.73)); +#677 = VECTOR('',#678,1.); +#678 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#679 = ORIENTED_EDGE('',*,*,#403,.T.); +#680 = ORIENTED_EDGE('',*,*,#118,.T.); +#681 = ORIENTED_EDGE('',*,*,#608,.T.); +#682 = ORIENTED_EDGE('',*,*,#683,.F.); +#683 = EDGE_CURVE('',#673,#609,#684,.T.); +#684 = LINE('',#685,#686); +#685 = CARTESIAN_POINT('',(4.6,0.32,1.E-001)); +#686 = VECTOR('',#687,1.); +#687 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#688 = PLANE('',#689); +#689 = AXIS2_PLACEMENT_3D('',#690,#691,#692); +#690 = CARTESIAN_POINT('',(4.6,0.32,3.73)); +#691 = DIRECTION('',(1.,0.E+000,0.E+000)); +#692 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#693 = ADVANCED_FACE('',(#694),#720,.F.); +#694 = FACE_BOUND('',#695,.F.); +#695 = EDGE_LOOP('',(#696,#704,#712,#718,#719)); +#696 = ORIENTED_EDGE('',*,*,#697,.F.); +#697 = EDGE_CURVE('',#698,#411,#700,.T.); +#698 = VERTEX_POINT('',#699); +#699 = CARTESIAN_POINT('',(1.15,0.32,1.E-001)); +#700 = LINE('',#701,#702); +#701 = CARTESIAN_POINT('',(1.15,0.32,1.E-001)); +#702 = VECTOR('',#703,1.); +#703 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#704 = ORIENTED_EDGE('',*,*,#705,.T.); +#705 = EDGE_CURVE('',#698,#706,#708,.T.); +#706 = VERTEX_POINT('',#707); +#707 = CARTESIAN_POINT('',(1.15,-0.32,0.1)); +#708 = LINE('',#709,#710); +#709 = CARTESIAN_POINT('',(1.15,0.32,1.E-001)); +#710 = VECTOR('',#711,1.); +#711 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#712 = ORIENTED_EDGE('',*,*,#713,.T.); +#713 = EDGE_CURVE('',#706,#95,#714,.T.); +#714 = LINE('',#715,#716); +#715 = CARTESIAN_POINT('',(1.15,-0.32,0.1)); +#716 = VECTOR('',#717,1.); +#717 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#718 = ORIENTED_EDGE('',*,*,#102,.T.); +#719 = ORIENTED_EDGE('',*,*,#410,.T.); +#720 = PLANE('',#721); +#721 = AXIS2_PLACEMENT_3D('',#722,#723,#724); +#722 = CARTESIAN_POINT('',(1.15,0.32,1.E-001)); +#723 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#724 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#725 = ADVANCED_FACE('',(#726),#784,.F.); +#726 = FACE_BOUND('',#727,.F.); +#727 = EDGE_LOOP('',(#728,#738,#746,#752,#753,#754,#762,#770,#778)); +#728 = ORIENTED_EDGE('',*,*,#729,.F.); +#729 = EDGE_CURVE('',#730,#732,#734,.T.); +#730 = VERTEX_POINT('',#731); +#731 = CARTESIAN_POINT('',(-0.6,-0.32,1.42108547152E-016)); +#732 = VERTEX_POINT('',#733); +#733 = CARTESIAN_POINT('',(-0.6,-0.32,-8.71076951546)); +#734 = LINE('',#735,#736); +#735 = CARTESIAN_POINT('',(-0.6,-0.32,1.42108547152E-016)); +#736 = VECTOR('',#737,1.); +#737 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#738 = ORIENTED_EDGE('',*,*,#739,.F.); +#739 = EDGE_CURVE('',#740,#730,#742,.T.); +#740 = VERTEX_POINT('',#741); +#741 = CARTESIAN_POINT('',(-0.6,-0.32,0.1)); +#742 = LINE('',#743,#744); +#743 = CARTESIAN_POINT('',(-0.6,-0.32,0.1)); +#744 = VECTOR('',#745,1.); +#745 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#746 = ORIENTED_EDGE('',*,*,#747,.F.); +#747 = EDGE_CURVE('',#87,#740,#748,.T.); +#748 = LINE('',#749,#750); +#749 = CARTESIAN_POINT('',(-0.6,-0.32,3.73)); +#750 = VECTOR('',#751,1.); +#751 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#752 = ORIENTED_EDGE('',*,*,#94,.T.); +#753 = ORIENTED_EDGE('',*,*,#713,.F.); +#754 = ORIENTED_EDGE('',*,*,#755,.F.); +#755 = EDGE_CURVE('',#756,#706,#758,.T.); +#756 = VERTEX_POINT('',#757); +#757 = CARTESIAN_POINT('',(0.6,-0.32,1.42108547152E-016)); +#758 = LINE('',#759,#760); +#759 = CARTESIAN_POINT('',(0.6,-0.32,1.42108547152E-016)); +#760 = VECTOR('',#761,1.); +#761 = DIRECTION('',(0.9838699101,1.191616393559E-016,0.1788854382)); +#762 = ORIENTED_EDGE('',*,*,#763,.F.); +#763 = EDGE_CURVE('',#764,#756,#766,.T.); +#764 = VERTEX_POINT('',#765); +#765 = CARTESIAN_POINT('',(0.6,-0.32,-8.71076951546)); +#766 = LINE('',#767,#768); +#767 = CARTESIAN_POINT('',(0.6,-0.32,-8.71076951546)); +#768 = VECTOR('',#769,1.); +#769 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#770 = ORIENTED_EDGE('',*,*,#771,.F.); +#771 = EDGE_CURVE('',#772,#764,#774,.T.); +#772 = VERTEX_POINT('',#773); +#773 = CARTESIAN_POINT('',(5.551115123126E-017,-0.32,-9.75)); +#774 = LINE('',#775,#776); +#775 = CARTESIAN_POINT('',(0.E+000,-0.32,-9.75)); +#776 = VECTOR('',#777,1.); +#777 = DIRECTION('',(0.5,5.768888059149E-016,0.866025403784)); +#778 = ORIENTED_EDGE('',*,*,#779,.F.); +#779 = EDGE_CURVE('',#732,#772,#780,.T.); +#780 = LINE('',#781,#782); +#781 = CARTESIAN_POINT('',(-0.6,-0.32,-8.71076951546)); +#782 = VECTOR('',#783,1.); +#783 = DIRECTION('',(0.5,-5.768888059149E-016,-0.866025403784)); +#784 = PLANE('',#785); +#785 = AXIS2_PLACEMENT_3D('',#786,#787,#788); +#786 = CARTESIAN_POINT('',(-0.6,-0.32,1.42108547152E-016)); +#787 = DIRECTION('',(0.E+000,1.,-6.661338147751E-016)); +#788 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#789 = ADVANCED_FACE('',(#790),#809,.F.); +#790 = FACE_BOUND('',#791,.F.); +#791 = EDGE_LOOP('',(#792,#800,#801,#802,#803)); +#792 = ORIENTED_EDGE('',*,*,#793,.F.); +#793 = EDGE_CURVE('',#419,#794,#796,.T.); +#794 = VERTEX_POINT('',#795); +#795 = CARTESIAN_POINT('',(-0.6,0.32,1.E-001)); +#796 = LINE('',#797,#798); +#797 = CARTESIAN_POINT('',(-0.6,0.32,3.73)); +#798 = VECTOR('',#799,1.); +#799 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#800 = ORIENTED_EDGE('',*,*,#426,.T.); +#801 = ORIENTED_EDGE('',*,*,#86,.T.); +#802 = ORIENTED_EDGE('',*,*,#747,.T.); +#803 = ORIENTED_EDGE('',*,*,#804,.F.); +#804 = EDGE_CURVE('',#794,#740,#805,.T.); +#805 = LINE('',#806,#807); +#806 = CARTESIAN_POINT('',(-0.6,0.32,1.E-001)); +#807 = VECTOR('',#808,1.); +#808 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#809 = PLANE('',#810); +#810 = AXIS2_PLACEMENT_3D('',#811,#812,#813); +#811 = CARTESIAN_POINT('',(-0.6,0.32,3.73)); +#812 = DIRECTION('',(1.,0.E+000,0.E+000)); +#813 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#814 = ADVANCED_FACE('',(#815),#849,.T.); +#815 = FACE_BOUND('',#816,.T.); +#816 = EDGE_LOOP('',(#817,#825,#826,#827,#835,#843)); +#817 = ORIENTED_EDGE('',*,*,#818,.F.); +#818 = EDGE_CURVE('',#311,#819,#821,.T.); +#819 = VERTEX_POINT('',#820); +#820 = CARTESIAN_POINT('',(-1.995,3.17,3.)); +#821 = LINE('',#822,#823); +#822 = CARTESIAN_POINT('',(-1.995,1.9,3.)); +#823 = VECTOR('',#824,1.); +#824 = DIRECTION('',(0.E+000,1.,0.E+000)); +#825 = ORIENTED_EDGE('',*,*,#310,.T.); +#826 = ORIENTED_EDGE('',*,*,#286,.T.); +#827 = ORIENTED_EDGE('',*,*,#828,.T.); +#828 = EDGE_CURVE('',#279,#829,#831,.T.); +#829 = VERTEX_POINT('',#830); +#830 = CARTESIAN_POINT('',(-1.995,1.9,19.85)); +#831 = LINE('',#832,#833); +#832 = CARTESIAN_POINT('',(-1.995,1.9,3.)); +#833 = VECTOR('',#834,1.); +#834 = DIRECTION('',(0.E+000,0.E+000,1.)); +#835 = ORIENTED_EDGE('',*,*,#836,.T.); +#836 = EDGE_CURVE('',#829,#837,#839,.T.); +#837 = VERTEX_POINT('',#838); +#838 = CARTESIAN_POINT('',(-1.995,3.17,19.85)); +#839 = LINE('',#840,#841); +#840 = CARTESIAN_POINT('',(-1.995,1.9,19.85)); +#841 = VECTOR('',#842,1.); +#842 = DIRECTION('',(0.E+000,1.,-2.22044604925E-016)); +#843 = ORIENTED_EDGE('',*,*,#844,.F.); +#844 = EDGE_CURVE('',#819,#837,#845,.T.); +#845 = LINE('',#846,#847); +#846 = CARTESIAN_POINT('',(-1.995,3.17,3.)); +#847 = VECTOR('',#848,1.); +#848 = DIRECTION('',(0.E+000,0.E+000,1.)); +#849 = PLANE('',#850); +#850 = AXIS2_PLACEMENT_3D('',#851,#852,#853); +#851 = CARTESIAN_POINT('',(-1.995,1.9,3.)); +#852 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#853 = DIRECTION('',(0.E+000,1.,0.E+000)); +#854 = ADVANCED_FACE('',(#855,#889),#900,.T.); +#855 = FACE_BOUND('',#856,.T.); +#856 = EDGE_LOOP('',(#857,#858,#866,#874,#882,#888)); +#857 = ORIENTED_EDGE('',*,*,#278,.T.); +#858 = ORIENTED_EDGE('',*,*,#859,.T.); +#859 = EDGE_CURVE('',#271,#860,#862,.T.); +#860 = VERTEX_POINT('',#861); +#861 = CARTESIAN_POINT('',(12.945,1.9,19.85)); +#862 = LINE('',#863,#864); +#863 = CARTESIAN_POINT('',(12.945,1.9,3.)); +#864 = VECTOR('',#865,1.); +#865 = DIRECTION('',(0.E+000,0.E+000,1.)); +#866 = ORIENTED_EDGE('',*,*,#867,.F.); +#867 = EDGE_CURVE('',#868,#860,#870,.T.); +#868 = VERTEX_POINT('',#869); +#869 = CARTESIAN_POINT('',(10.445,1.9,22.35)); +#870 = LINE('',#871,#872); +#871 = CARTESIAN_POINT('',(10.445,1.9,22.35)); +#872 = VECTOR('',#873,1.); +#873 = DIRECTION('',(0.707106781187,-1.570092458684E-016,-0.707106781187 + )); +#874 = ORIENTED_EDGE('',*,*,#875,.T.); +#875 = EDGE_CURVE('',#868,#876,#878,.T.); +#876 = VERTEX_POINT('',#877); +#877 = CARTESIAN_POINT('',(0.505,1.9,22.35)); +#878 = LINE('',#879,#880); +#879 = CARTESIAN_POINT('',(12.945,1.9,22.35)); +#880 = VECTOR('',#881,1.); +#881 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#882 = ORIENTED_EDGE('',*,*,#883,.T.); +#883 = EDGE_CURVE('',#876,#829,#884,.T.); +#884 = LINE('',#885,#886); +#885 = CARTESIAN_POINT('',(0.505,1.9,22.35)); +#886 = VECTOR('',#887,1.); +#887 = DIRECTION('',(-0.707106781187,-1.570092458684E-016, + -0.707106781187)); +#888 = ORIENTED_EDGE('',*,*,#828,.F.); +#889 = FACE_BOUND('',#890,.T.); +#890 = EDGE_LOOP('',(#891)); +#891 = ORIENTED_EDGE('',*,*,#892,.F.); +#892 = EDGE_CURVE('',#893,#893,#895,.T.); +#893 = VERTEX_POINT('',#894); +#894 = CARTESIAN_POINT('',(7.5,1.9,18.2)); +#895 = CIRCLE('',#896,2.025); +#896 = AXIS2_PLACEMENT_3D('',#897,#898,#899); +#897 = CARTESIAN_POINT('',(5.475,1.9,18.2)); +#898 = DIRECTION('',(0.E+000,-1.,2.22044604925E-016)); +#899 = DIRECTION('',(1.,0.E+000,0.E+000)); +#900 = PLANE('',#901); +#901 = AXIS2_PLACEMENT_3D('',#902,#903,#904); +#902 = CARTESIAN_POINT('',(12.945,1.9,3.)); +#903 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#904 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#905 = ADVANCED_FACE('',(#906),#933,.T.); +#906 = FACE_BOUND('',#907,.T.); +#907 = EDGE_LOOP('',(#908,#916,#924,#930,#931,#932)); +#908 = ORIENTED_EDGE('',*,*,#909,.F.); +#909 = EDGE_CURVE('',#910,#319,#912,.T.); +#910 = VERTEX_POINT('',#911); +#911 = CARTESIAN_POINT('',(12.945,3.17,3.)); +#912 = LINE('',#913,#914); +#913 = CARTESIAN_POINT('',(12.945,3.17,3.)); +#914 = VECTOR('',#915,1.); +#915 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#916 = ORIENTED_EDGE('',*,*,#917,.T.); +#917 = EDGE_CURVE('',#910,#918,#920,.T.); +#918 = VERTEX_POINT('',#919); +#919 = CARTESIAN_POINT('',(12.945,3.17,19.85)); +#920 = LINE('',#921,#922); +#921 = CARTESIAN_POINT('',(12.945,3.17,3.)); +#922 = VECTOR('',#923,1.); +#923 = DIRECTION('',(0.E+000,0.E+000,1.)); +#924 = ORIENTED_EDGE('',*,*,#925,.F.); +#925 = EDGE_CURVE('',#860,#918,#926,.T.); +#926 = LINE('',#927,#928); +#927 = CARTESIAN_POINT('',(12.945,1.9,19.85)); +#928 = VECTOR('',#929,1.); +#929 = DIRECTION('',(0.E+000,1.,-2.22044604925E-016)); +#930 = ORIENTED_EDGE('',*,*,#859,.F.); +#931 = ORIENTED_EDGE('',*,*,#270,.T.); +#932 = ORIENTED_EDGE('',*,*,#326,.T.); +#933 = PLANE('',#934); +#934 = AXIS2_PLACEMENT_3D('',#935,#936,#937); +#935 = CARTESIAN_POINT('',(12.945,3.17,3.)); +#936 = DIRECTION('',(1.,0.E+000,0.E+000)); +#937 = DIRECTION('',(0.E+000,-1.,0.E+000)); +#938 = ADVANCED_FACE('',(#939),#950,.F.); +#939 = FACE_BOUND('',#940,.F.); +#940 = EDGE_LOOP('',(#941,#947,#948,#949)); +#941 = ORIENTED_EDGE('',*,*,#942,.F.); +#942 = EDGE_CURVE('',#819,#910,#943,.T.); +#943 = LINE('',#944,#945); +#944 = CARTESIAN_POINT('',(-1.995,3.17,3.)); +#945 = VECTOR('',#946,1.); +#946 = DIRECTION('',(1.,0.E+000,0.E+000)); +#947 = ORIENTED_EDGE('',*,*,#818,.F.); +#948 = ORIENTED_EDGE('',*,*,#318,.T.); +#949 = ORIENTED_EDGE('',*,*,#909,.F.); +#950 = PLANE('',#951); +#951 = AXIS2_PLACEMENT_3D('',#952,#953,#954); +#952 = CARTESIAN_POINT('',(-1.995,3.17,3.)); +#953 = DIRECTION('',(0.E+000,0.E+000,1.)); +#954 = DIRECTION('',(1.,0.E+000,0.E+000)); +#955 = ADVANCED_FACE('',(#956),#1007,.T.); +#956 = FACE_BOUND('',#957,.T.); +#957 = EDGE_LOOP('',(#958,#968,#974,#975,#976,#977,#985,#993,#1001)); +#958 = ORIENTED_EDGE('',*,*,#959,.F.); +#959 = EDGE_CURVE('',#960,#962,#964,.T.); +#960 = VERTEX_POINT('',#961); +#961 = CARTESIAN_POINT('',(-0.6,0.32,-1.42108547152E-016)); +#962 = VERTEX_POINT('',#963); +#963 = CARTESIAN_POINT('',(-0.6,0.32,-8.71076951546)); +#964 = LINE('',#965,#966); +#965 = CARTESIAN_POINT('',(-0.6,0.32,-1.42108547152E-016)); +#966 = VECTOR('',#967,1.); +#967 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#968 = ORIENTED_EDGE('',*,*,#969,.F.); +#969 = EDGE_CURVE('',#794,#960,#970,.T.); +#970 = LINE('',#971,#972); +#971 = CARTESIAN_POINT('',(-0.6,0.32,1.E-001)); +#972 = VECTOR('',#973,1.); +#973 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#974 = ORIENTED_EDGE('',*,*,#793,.F.); +#975 = ORIENTED_EDGE('',*,*,#418,.T.); +#976 = ORIENTED_EDGE('',*,*,#697,.F.); +#977 = ORIENTED_EDGE('',*,*,#978,.F.); +#978 = EDGE_CURVE('',#979,#698,#981,.T.); +#979 = VERTEX_POINT('',#980); +#980 = CARTESIAN_POINT('',(0.6,0.32,-1.42108547152E-016)); +#981 = LINE('',#982,#983); +#982 = CARTESIAN_POINT('',(0.6,0.32,-1.42108547152E-016)); +#983 = VECTOR('',#984,1.); +#984 = DIRECTION('',(0.9838699101,1.191616393559E-016,0.1788854382)); +#985 = ORIENTED_EDGE('',*,*,#986,.F.); +#986 = EDGE_CURVE('',#987,#979,#989,.T.); +#987 = VERTEX_POINT('',#988); +#988 = CARTESIAN_POINT('',(0.6,0.32,-8.71076951546)); +#989 = LINE('',#990,#991); +#990 = CARTESIAN_POINT('',(0.6,0.32,-8.71076951546)); +#991 = VECTOR('',#992,1.); +#992 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#993 = ORIENTED_EDGE('',*,*,#994,.F.); +#994 = EDGE_CURVE('',#995,#987,#997,.T.); +#995 = VERTEX_POINT('',#996); +#996 = CARTESIAN_POINT('',(5.551115123126E-017,0.32,-9.75)); +#997 = LINE('',#998,#999); +#998 = CARTESIAN_POINT('',(0.E+000,0.32,-9.75)); +#999 = VECTOR('',#1000,1.); +#1000 = DIRECTION('',(0.5,5.768888059149E-016,0.866025403784)); +#1001 = ORIENTED_EDGE('',*,*,#1002,.F.); +#1002 = EDGE_CURVE('',#962,#995,#1003,.T.); +#1003 = LINE('',#1004,#1005); +#1004 = CARTESIAN_POINT('',(-0.6,0.32,-8.71076951546)); +#1005 = VECTOR('',#1006,1.); +#1006 = DIRECTION('',(0.5,-5.768888059149E-016,-0.866025403784)); +#1007 = PLANE('',#1008); +#1008 = AXIS2_PLACEMENT_3D('',#1009,#1010,#1011); +#1009 = CARTESIAN_POINT('',(-0.6,0.32,-1.42108547152E-016)); +#1010 = DIRECTION('',(0.E+000,1.,-6.661338147751E-016)); +#1011 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1012 = ADVANCED_FACE('',(#1013),#1064,.F.); +#1013 = FACE_BOUND('',#1014,.F.); +#1014 = EDGE_LOOP('',(#1015,#1016,#1024,#1032,#1040,#1048,#1056,#1062, + #1063)); +#1015 = ORIENTED_EDGE('',*,*,#672,.T.); +#1016 = ORIENTED_EDGE('',*,*,#1017,.T.); +#1017 = EDGE_CURVE('',#673,#1018,#1020,.T.); +#1018 = VERTEX_POINT('',#1019); +#1019 = CARTESIAN_POINT('',(4.875,0.32,-1.42108547152E-016)); +#1020 = LINE('',#1021,#1022); +#1021 = CARTESIAN_POINT('',(4.6,0.32,1.E-001)); +#1022 = VECTOR('',#1023,1.); +#1023 = DIRECTION('',(0.939793423488,-2.276466102869E-016, + -0.341743063087)); +#1024 = ORIENTED_EDGE('',*,*,#1025,.T.); +#1025 = EDGE_CURVE('',#1018,#1026,#1028,.T.); +#1026 = VERTEX_POINT('',#1027); +#1027 = CARTESIAN_POINT('',(4.875,0.32,-8.71076951546)); +#1028 = LINE('',#1029,#1030); +#1029 = CARTESIAN_POINT('',(4.875,0.32,-1.42108547152E-016)); +#1030 = VECTOR('',#1031,1.); +#1031 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1032 = ORIENTED_EDGE('',*,*,#1033,.T.); +#1033 = EDGE_CURVE('',#1026,#1034,#1036,.T.); +#1034 = VERTEX_POINT('',#1035); +#1035 = CARTESIAN_POINT('',(5.475,0.32,-9.75)); +#1036 = LINE('',#1037,#1038); +#1037 = CARTESIAN_POINT('',(4.875,0.32,-8.71076951546)); +#1038 = VECTOR('',#1039,1.); +#1039 = DIRECTION('',(0.5,-5.768888059149E-016,-0.866025403784)); +#1040 = ORIENTED_EDGE('',*,*,#1041,.T.); +#1041 = EDGE_CURVE('',#1034,#1042,#1044,.T.); +#1042 = VERTEX_POINT('',#1043); +#1043 = CARTESIAN_POINT('',(6.075,0.32,-8.71076951546)); +#1044 = LINE('',#1045,#1046); +#1045 = CARTESIAN_POINT('',(5.475,0.32,-9.75)); +#1046 = VECTOR('',#1047,1.); +#1047 = DIRECTION('',(0.5,5.768888059149E-016,0.866025403784)); +#1048 = ORIENTED_EDGE('',*,*,#1049,.T.); +#1049 = EDGE_CURVE('',#1042,#1050,#1052,.T.); +#1050 = VERTEX_POINT('',#1051); +#1051 = CARTESIAN_POINT('',(6.075,0.32,-1.42108547152E-016)); +#1052 = LINE('',#1053,#1054); +#1053 = CARTESIAN_POINT('',(6.075,0.32,-8.71076951546)); +#1054 = VECTOR('',#1055,1.); +#1055 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1056 = ORIENTED_EDGE('',*,*,#1057,.T.); +#1057 = EDGE_CURVE('',#1050,#577,#1058,.T.); +#1058 = LINE('',#1059,#1060); +#1059 = CARTESIAN_POINT('',(6.075,0.32,-1.42108547152E-016)); +#1060 = VECTOR('',#1061,1.); +#1061 = DIRECTION('',(0.939793423488,2.276466102869E-016,0.341743063087) + ); +#1062 = ORIENTED_EDGE('',*,*,#576,.T.); +#1063 = ORIENTED_EDGE('',*,*,#395,.T.); +#1064 = PLANE('',#1065); +#1065 = AXIS2_PLACEMENT_3D('',#1066,#1067,#1068); +#1066 = CARTESIAN_POINT('',(4.6,0.32,1.E-001)); +#1067 = DIRECTION('',(0.E+000,-1.,6.661338147751E-016)); +#1068 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1069 = ADVANCED_FACE('',(#1070),#1121,.F.); +#1070 = FACE_BOUND('',#1071,.F.); +#1071 = EDGE_LOOP('',(#1072,#1073,#1081,#1089,#1097,#1105,#1113,#1119, + #1120)); +#1072 = ORIENTED_EDGE('',*,*,#551,.T.); +#1073 = ORIENTED_EDGE('',*,*,#1074,.T.); +#1074 = EDGE_CURVE('',#552,#1075,#1077,.T.); +#1075 = VERTEX_POINT('',#1076); +#1076 = CARTESIAN_POINT('',(10.35,0.32,-1.42108547152E-016)); +#1077 = LINE('',#1078,#1079); +#1078 = CARTESIAN_POINT('',(9.8,0.32,1.E-001)); +#1079 = VECTOR('',#1080,1.); +#1080 = DIRECTION('',(0.9838699101,-1.191616393559E-016,-0.1788854382)); +#1081 = ORIENTED_EDGE('',*,*,#1082,.T.); +#1082 = EDGE_CURVE('',#1075,#1083,#1085,.T.); +#1083 = VERTEX_POINT('',#1084); +#1084 = CARTESIAN_POINT('',(10.35,0.32,-8.71076951546)); +#1085 = LINE('',#1086,#1087); +#1086 = CARTESIAN_POINT('',(10.35,0.32,-1.42108547152E-016)); +#1087 = VECTOR('',#1088,1.); +#1088 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1089 = ORIENTED_EDGE('',*,*,#1090,.T.); +#1090 = EDGE_CURVE('',#1083,#1091,#1093,.T.); +#1091 = VERTEX_POINT('',#1092); +#1092 = CARTESIAN_POINT('',(10.95,0.32,-9.75)); +#1093 = LINE('',#1094,#1095); +#1094 = CARTESIAN_POINT('',(10.35,0.32,-8.71076951546)); +#1095 = VECTOR('',#1096,1.); +#1096 = DIRECTION('',(0.5,-5.768888059149E-016,-0.866025403784)); +#1097 = ORIENTED_EDGE('',*,*,#1098,.T.); +#1098 = EDGE_CURVE('',#1091,#1099,#1101,.T.); +#1099 = VERTEX_POINT('',#1100); +#1100 = CARTESIAN_POINT('',(11.55,0.32,-8.71076951546)); +#1101 = LINE('',#1102,#1103); +#1102 = CARTESIAN_POINT('',(10.95,0.32,-9.75)); +#1103 = VECTOR('',#1104,1.); +#1104 = DIRECTION('',(0.5,5.768888059149E-016,0.866025403784)); +#1105 = ORIENTED_EDGE('',*,*,#1106,.T.); +#1106 = EDGE_CURVE('',#1099,#1107,#1109,.T.); +#1107 = VERTEX_POINT('',#1108); +#1108 = CARTESIAN_POINT('',(11.55,0.32,-1.42108547152E-016)); +#1109 = LINE('',#1110,#1111); +#1110 = CARTESIAN_POINT('',(11.55,0.32,-8.71076951546)); +#1111 = VECTOR('',#1112,1.); +#1112 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1113 = ORIENTED_EDGE('',*,*,#1114,.T.); +#1114 = EDGE_CURVE('',#1107,#456,#1115,.T.); +#1115 = LINE('',#1116,#1117); +#1116 = CARTESIAN_POINT('',(11.55,0.32,-1.42108547152E-016)); +#1117 = VECTOR('',#1118,1.); +#1118 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1119 = ORIENTED_EDGE('',*,*,#455,.T.); +#1120 = ORIENTED_EDGE('',*,*,#372,.T.); +#1121 = PLANE('',#1122); +#1122 = AXIS2_PLACEMENT_3D('',#1123,#1124,#1125); +#1123 = CARTESIAN_POINT('',(9.8,0.32,1.E-001)); +#1124 = DIRECTION('',(-5.145543371634E-033,-1.,6.661338147751E-016)); +#1125 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1126 = ADVANCED_FACE('',(#1127),#1138,.F.); +#1127 = FACE_BOUND('',#1128,.F.); +#1128 = EDGE_LOOP('',(#1129,#1135,#1136,#1137)); +#1129 = ORIENTED_EDGE('',*,*,#1130,.T.); +#1130 = EDGE_CURVE('',#1107,#528,#1131,.T.); +#1131 = LINE('',#1132,#1133); +#1132 = CARTESIAN_POINT('',(11.55,0.32,-1.42108547152E-016)); +#1133 = VECTOR('',#1134,1.); +#1134 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1135 = ORIENTED_EDGE('',*,*,#535,.T.); +#1136 = ORIENTED_EDGE('',*,*,#463,.F.); +#1137 = ORIENTED_EDGE('',*,*,#1114,.F.); +#1138 = PLANE('',#1139); +#1139 = AXIS2_PLACEMENT_3D('',#1140,#1141,#1142); +#1140 = CARTESIAN_POINT('',(11.55,0.32,-1.42108547152E-016)); +#1141 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1142 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1143 = ADVANCED_FACE('',(#1144),#1155,.F.); +#1144 = FACE_BOUND('',#1145,.F.); +#1145 = EDGE_LOOP('',(#1146,#1152,#1153,#1154)); +#1146 = ORIENTED_EDGE('',*,*,#1147,.T.); +#1147 = EDGE_CURVE('',#1099,#520,#1148,.T.); +#1148 = LINE('',#1149,#1150); +#1149 = CARTESIAN_POINT('',(11.55,0.32,-8.71076951546)); +#1150 = VECTOR('',#1151,1.); +#1151 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1152 = ORIENTED_EDGE('',*,*,#527,.T.); +#1153 = ORIENTED_EDGE('',*,*,#1130,.F.); +#1154 = ORIENTED_EDGE('',*,*,#1106,.F.); +#1155 = PLANE('',#1156); +#1156 = AXIS2_PLACEMENT_3D('',#1157,#1158,#1159); +#1157 = CARTESIAN_POINT('',(11.55,0.32,-8.71076951546)); +#1158 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1159 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1160 = ADVANCED_FACE('',(#1161),#1172,.F.); +#1161 = FACE_BOUND('',#1162,.F.); +#1162 = EDGE_LOOP('',(#1163,#1169,#1170,#1171)); +#1163 = ORIENTED_EDGE('',*,*,#1164,.T.); +#1164 = EDGE_CURVE('',#1091,#512,#1165,.T.); +#1165 = LINE('',#1166,#1167); +#1166 = CARTESIAN_POINT('',(10.95,0.32,-9.75)); +#1167 = VECTOR('',#1168,1.); +#1168 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1169 = ORIENTED_EDGE('',*,*,#519,.T.); +#1170 = ORIENTED_EDGE('',*,*,#1147,.F.); +#1171 = ORIENTED_EDGE('',*,*,#1098,.F.); +#1172 = PLANE('',#1173); +#1173 = AXIS2_PLACEMENT_3D('',#1174,#1175,#1176); +#1174 = CARTESIAN_POINT('',(10.95,0.32,-9.75)); +#1175 = DIRECTION('',(-0.866025403784,2.220446049252E-016,0.5)); +#1176 = DIRECTION('',(0.5,5.768888059149E-016,0.866025403784)); +#1177 = ADVANCED_FACE('',(#1178),#1189,.F.); +#1178 = FACE_BOUND('',#1179,.F.); +#1179 = EDGE_LOOP('',(#1180,#1186,#1187,#1188)); +#1180 = ORIENTED_EDGE('',*,*,#1181,.T.); +#1181 = EDGE_CURVE('',#1083,#504,#1182,.T.); +#1182 = LINE('',#1183,#1184); +#1183 = CARTESIAN_POINT('',(10.35,0.32,-8.71076951546)); +#1184 = VECTOR('',#1185,1.); +#1185 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1186 = ORIENTED_EDGE('',*,*,#511,.T.); +#1187 = ORIENTED_EDGE('',*,*,#1164,.F.); +#1188 = ORIENTED_EDGE('',*,*,#1090,.F.); +#1189 = PLANE('',#1190); +#1190 = AXIS2_PLACEMENT_3D('',#1191,#1192,#1193); +#1191 = CARTESIAN_POINT('',(10.35,0.32,-8.71076951546)); +#1192 = DIRECTION('',(0.866025403784,2.220446049252E-016,0.5)); +#1193 = DIRECTION('',(0.5,-5.768888059149E-016,-0.866025403784)); +#1194 = ADVANCED_FACE('',(#1195),#1206,.F.); +#1195 = FACE_BOUND('',#1196,.F.); +#1196 = EDGE_LOOP('',(#1197,#1203,#1204,#1205)); +#1197 = ORIENTED_EDGE('',*,*,#1198,.T.); +#1198 = EDGE_CURVE('',#1075,#496,#1199,.T.); +#1199 = LINE('',#1200,#1201); +#1200 = CARTESIAN_POINT('',(10.35,0.32,-1.42108547152E-016)); +#1201 = VECTOR('',#1202,1.); +#1202 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1203 = ORIENTED_EDGE('',*,*,#503,.T.); +#1204 = ORIENTED_EDGE('',*,*,#1181,.F.); +#1205 = ORIENTED_EDGE('',*,*,#1082,.F.); +#1206 = PLANE('',#1207); +#1207 = AXIS2_PLACEMENT_3D('',#1208,#1209,#1210); +#1208 = CARTESIAN_POINT('',(10.35,0.32,-1.42108547152E-016)); +#1209 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1210 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1211 = ADVANCED_FACE('',(#1212),#1218,.F.); +#1212 = FACE_BOUND('',#1213,.F.); +#1213 = EDGE_LOOP('',(#1214,#1215,#1216,#1217)); +#1214 = ORIENTED_EDGE('',*,*,#562,.T.); +#1215 = ORIENTED_EDGE('',*,*,#495,.T.); +#1216 = ORIENTED_EDGE('',*,*,#1198,.F.); +#1217 = ORIENTED_EDGE('',*,*,#1074,.F.); +#1218 = PLANE('',#1219); +#1219 = AXIS2_PLACEMENT_3D('',#1220,#1221,#1222); +#1220 = CARTESIAN_POINT('',(9.8,0.32,1.E-001)); +#1221 = DIRECTION('',(0.1788854382,4.369260109715E-016,0.9838699101)); +#1222 = DIRECTION('',(0.9838699101,-1.191616393559E-016,-0.1788854382)); +#1223 = ADVANCED_FACE('',(#1224),#1235,.F.); +#1224 = FACE_BOUND('',#1225,.F.); +#1225 = EDGE_LOOP('',(#1226,#1232,#1233,#1234)); +#1226 = ORIENTED_EDGE('',*,*,#1227,.T.); +#1227 = EDGE_CURVE('',#1050,#649,#1228,.T.); +#1228 = LINE('',#1229,#1230); +#1229 = CARTESIAN_POINT('',(6.075,0.32,-1.42108547152E-016)); +#1230 = VECTOR('',#1231,1.); +#1231 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1232 = ORIENTED_EDGE('',*,*,#656,.T.); +#1233 = ORIENTED_EDGE('',*,*,#584,.F.); +#1234 = ORIENTED_EDGE('',*,*,#1057,.F.); +#1235 = PLANE('',#1236); +#1236 = AXIS2_PLACEMENT_3D('',#1237,#1238,#1239); +#1237 = CARTESIAN_POINT('',(6.075,0.32,-1.42108547152E-016)); +#1238 = DIRECTION('',(-0.341743063087,4.173521188593E-016,0.939793423488 + )); +#1239 = DIRECTION('',(0.939793423488,2.276466102869E-016,0.341743063087) + ); +#1240 = ADVANCED_FACE('',(#1241),#1252,.F.); +#1241 = FACE_BOUND('',#1242,.F.); +#1242 = EDGE_LOOP('',(#1243,#1249,#1250,#1251)); +#1243 = ORIENTED_EDGE('',*,*,#1244,.T.); +#1244 = EDGE_CURVE('',#1042,#641,#1245,.T.); +#1245 = LINE('',#1246,#1247); +#1246 = CARTESIAN_POINT('',(6.075,0.32,-8.71076951546)); +#1247 = VECTOR('',#1248,1.); +#1248 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1249 = ORIENTED_EDGE('',*,*,#648,.T.); +#1250 = ORIENTED_EDGE('',*,*,#1227,.F.); +#1251 = ORIENTED_EDGE('',*,*,#1049,.F.); +#1252 = PLANE('',#1253); +#1253 = AXIS2_PLACEMENT_3D('',#1254,#1255,#1256); +#1254 = CARTESIAN_POINT('',(6.075,0.32,-8.71076951546)); +#1255 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1256 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1257 = ADVANCED_FACE('',(#1258),#1269,.F.); +#1258 = FACE_BOUND('',#1259,.F.); +#1259 = EDGE_LOOP('',(#1260,#1266,#1267,#1268)); +#1260 = ORIENTED_EDGE('',*,*,#1261,.T.); +#1261 = EDGE_CURVE('',#1034,#633,#1262,.T.); +#1262 = LINE('',#1263,#1264); +#1263 = CARTESIAN_POINT('',(5.475,0.32,-9.75)); +#1264 = VECTOR('',#1265,1.); +#1265 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1266 = ORIENTED_EDGE('',*,*,#640,.T.); +#1267 = ORIENTED_EDGE('',*,*,#1244,.F.); +#1268 = ORIENTED_EDGE('',*,*,#1041,.F.); +#1269 = PLANE('',#1270); +#1270 = AXIS2_PLACEMENT_3D('',#1271,#1272,#1273); +#1271 = CARTESIAN_POINT('',(5.475,0.32,-9.75)); +#1272 = DIRECTION('',(-0.866025403784,2.220446049252E-016,0.5)); +#1273 = DIRECTION('',(0.5,5.768888059149E-016,0.866025403784)); +#1274 = ADVANCED_FACE('',(#1275),#1286,.F.); +#1275 = FACE_BOUND('',#1276,.F.); +#1276 = EDGE_LOOP('',(#1277,#1283,#1284,#1285)); +#1277 = ORIENTED_EDGE('',*,*,#1278,.T.); +#1278 = EDGE_CURVE('',#1026,#625,#1279,.T.); +#1279 = LINE('',#1280,#1281); +#1280 = CARTESIAN_POINT('',(4.875,0.32,-8.71076951546)); +#1281 = VECTOR('',#1282,1.); +#1282 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1283 = ORIENTED_EDGE('',*,*,#632,.T.); +#1284 = ORIENTED_EDGE('',*,*,#1261,.F.); +#1285 = ORIENTED_EDGE('',*,*,#1033,.F.); +#1286 = PLANE('',#1287); +#1287 = AXIS2_PLACEMENT_3D('',#1288,#1289,#1290); +#1288 = CARTESIAN_POINT('',(4.875,0.32,-8.71076951546)); +#1289 = DIRECTION('',(0.866025403784,2.220446049252E-016,0.5)); +#1290 = DIRECTION('',(0.5,-5.768888059149E-016,-0.866025403784)); +#1291 = ADVANCED_FACE('',(#1292),#1303,.F.); +#1292 = FACE_BOUND('',#1293,.F.); +#1293 = EDGE_LOOP('',(#1294,#1300,#1301,#1302)); +#1294 = ORIENTED_EDGE('',*,*,#1295,.T.); +#1295 = EDGE_CURVE('',#1018,#617,#1296,.T.); +#1296 = LINE('',#1297,#1298); +#1297 = CARTESIAN_POINT('',(4.875,0.32,-1.42108547152E-016)); +#1298 = VECTOR('',#1299,1.); +#1299 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1300 = ORIENTED_EDGE('',*,*,#624,.T.); +#1301 = ORIENTED_EDGE('',*,*,#1278,.F.); +#1302 = ORIENTED_EDGE('',*,*,#1025,.F.); +#1303 = PLANE('',#1304); +#1304 = AXIS2_PLACEMENT_3D('',#1305,#1306,#1307); +#1305 = CARTESIAN_POINT('',(4.875,0.32,-1.42108547152E-016)); +#1306 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1307 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1308 = ADVANCED_FACE('',(#1309),#1315,.F.); +#1309 = FACE_BOUND('',#1310,.F.); +#1310 = EDGE_LOOP('',(#1311,#1312,#1313,#1314)); +#1311 = ORIENTED_EDGE('',*,*,#683,.T.); +#1312 = ORIENTED_EDGE('',*,*,#616,.T.); +#1313 = ORIENTED_EDGE('',*,*,#1295,.F.); +#1314 = ORIENTED_EDGE('',*,*,#1017,.F.); +#1315 = PLANE('',#1316); +#1316 = AXIS2_PLACEMENT_3D('',#1317,#1318,#1319); +#1317 = CARTESIAN_POINT('',(4.6,0.32,1.E-001)); +#1318 = DIRECTION('',(0.341743063087,4.173521188593E-016,0.939793423488) + ); +#1319 = DIRECTION('',(0.939793423488,-2.276466102869E-016, + -0.341743063087)); +#1320 = ADVANCED_FACE('',(#1321),#1332,.F.); +#1321 = FACE_BOUND('',#1322,.F.); +#1322 = EDGE_LOOP('',(#1323,#1329,#1330,#1331)); +#1323 = ORIENTED_EDGE('',*,*,#1324,.T.); +#1324 = EDGE_CURVE('',#979,#756,#1325,.T.); +#1325 = LINE('',#1326,#1327); +#1326 = CARTESIAN_POINT('',(0.6,0.32,-1.42108547152E-016)); +#1327 = VECTOR('',#1328,1.); +#1328 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1329 = ORIENTED_EDGE('',*,*,#755,.T.); +#1330 = ORIENTED_EDGE('',*,*,#705,.F.); +#1331 = ORIENTED_EDGE('',*,*,#978,.F.); +#1332 = PLANE('',#1333); +#1333 = AXIS2_PLACEMENT_3D('',#1334,#1335,#1336); +#1334 = CARTESIAN_POINT('',(0.6,0.32,-1.42108547152E-016)); +#1335 = DIRECTION('',(-0.1788854382,4.369260109715E-016,0.9838699101)); +#1336 = DIRECTION('',(0.9838699101,1.191616393559E-016,0.1788854382)); +#1337 = ADVANCED_FACE('',(#1338),#1354,.F.); +#1338 = FACE_BOUND('',#1339,.F.); +#1339 = EDGE_LOOP('',(#1340,#1346,#1347,#1353)); +#1340 = ORIENTED_EDGE('',*,*,#1341,.T.); +#1341 = EDGE_CURVE('',#960,#730,#1342,.T.); +#1342 = LINE('',#1343,#1344); +#1343 = CARTESIAN_POINT('',(-0.6,0.32,-1.42108547152E-016)); +#1344 = VECTOR('',#1345,1.); +#1345 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1346 = ORIENTED_EDGE('',*,*,#729,.T.); +#1347 = ORIENTED_EDGE('',*,*,#1348,.F.); +#1348 = EDGE_CURVE('',#962,#732,#1349,.T.); +#1349 = LINE('',#1350,#1351); +#1350 = CARTESIAN_POINT('',(-0.6,0.32,-8.71076951546)); +#1351 = VECTOR('',#1352,1.); +#1352 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1353 = ORIENTED_EDGE('',*,*,#959,.F.); +#1354 = PLANE('',#1355); +#1355 = AXIS2_PLACEMENT_3D('',#1356,#1357,#1358); +#1356 = CARTESIAN_POINT('',(-0.6,0.32,-1.42108547152E-016)); +#1357 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1358 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1359 = ADVANCED_FACE('',(#1360),#1371,.F.); +#1360 = FACE_BOUND('',#1361,.F.); +#1361 = EDGE_LOOP('',(#1362,#1363,#1364,#1370)); +#1362 = ORIENTED_EDGE('',*,*,#1348,.T.); +#1363 = ORIENTED_EDGE('',*,*,#779,.T.); +#1364 = ORIENTED_EDGE('',*,*,#1365,.F.); +#1365 = EDGE_CURVE('',#995,#772,#1366,.T.); +#1366 = LINE('',#1367,#1368); +#1367 = CARTESIAN_POINT('',(5.551115123126E-017,0.32,-9.75)); +#1368 = VECTOR('',#1369,1.); +#1369 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1370 = ORIENTED_EDGE('',*,*,#1002,.F.); +#1371 = PLANE('',#1372); +#1372 = AXIS2_PLACEMENT_3D('',#1373,#1374,#1375); +#1373 = CARTESIAN_POINT('',(-0.6,0.32,-8.71076951546)); +#1374 = DIRECTION('',(0.866025403784,2.220446049252E-016,0.5)); +#1375 = DIRECTION('',(0.5,-5.768888059149E-016,-0.866025403784)); +#1376 = ADVANCED_FACE('',(#1377),#1388,.F.); +#1377 = FACE_BOUND('',#1378,.F.); +#1378 = EDGE_LOOP('',(#1379,#1380,#1381,#1387)); +#1379 = ORIENTED_EDGE('',*,*,#1365,.T.); +#1380 = ORIENTED_EDGE('',*,*,#771,.T.); +#1381 = ORIENTED_EDGE('',*,*,#1382,.F.); +#1382 = EDGE_CURVE('',#987,#764,#1383,.T.); +#1383 = LINE('',#1384,#1385); +#1384 = CARTESIAN_POINT('',(0.6,0.32,-8.71076951546)); +#1385 = VECTOR('',#1386,1.); +#1386 = DIRECTION('',(0.E+000,-1.,4.440892098501E-016)); +#1387 = ORIENTED_EDGE('',*,*,#994,.F.); +#1388 = PLANE('',#1389); +#1389 = AXIS2_PLACEMENT_3D('',#1390,#1391,#1392); +#1390 = CARTESIAN_POINT('',(0.E+000,0.32,-9.75)); +#1391 = DIRECTION('',(-0.866025403784,2.220446049252E-016,0.5)); +#1392 = DIRECTION('',(0.5,5.768888059149E-016,0.866025403784)); +#1393 = ADVANCED_FACE('',(#1394),#1400,.F.); +#1394 = FACE_BOUND('',#1395,.F.); +#1395 = EDGE_LOOP('',(#1396,#1397,#1398,#1399)); +#1396 = ORIENTED_EDGE('',*,*,#1382,.T.); +#1397 = ORIENTED_EDGE('',*,*,#763,.T.); +#1398 = ORIENTED_EDGE('',*,*,#1324,.F.); +#1399 = ORIENTED_EDGE('',*,*,#986,.F.); +#1400 = PLANE('',#1401); +#1401 = AXIS2_PLACEMENT_3D('',#1402,#1403,#1404); +#1402 = CARTESIAN_POINT('',(0.6,0.32,-8.71076951546)); +#1403 = DIRECTION('',(-1.,0.E+000,0.E+000)); +#1404 = DIRECTION('',(0.E+000,6.661338147751E-016,1.)); +#1405 = ADVANCED_FACE('',(#1406),#1412,.F.); +#1406 = FACE_BOUND('',#1407,.F.); +#1407 = EDGE_LOOP('',(#1408,#1409,#1410,#1411)); +#1408 = ORIENTED_EDGE('',*,*,#804,.T.); +#1409 = ORIENTED_EDGE('',*,*,#739,.T.); +#1410 = ORIENTED_EDGE('',*,*,#1341,.F.); +#1411 = ORIENTED_EDGE('',*,*,#969,.F.); +#1412 = PLANE('',#1413); +#1413 = AXIS2_PLACEMENT_3D('',#1414,#1415,#1416); +#1414 = CARTESIAN_POINT('',(-0.6,0.32,1.E-001)); +#1415 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1416 = DIRECTION('',(0.E+000,-6.661338147751E-016,-1.)); +#1417 = ADVANCED_FACE('',(#1418,#1445),#1456,.T.); +#1418 = FACE_BOUND('',#1419,.T.); +#1419 = EDGE_LOOP('',(#1420,#1421,#1422,#1430,#1438,#1444)); +#1420 = ORIENTED_EDGE('',*,*,#942,.F.); +#1421 = ORIENTED_EDGE('',*,*,#844,.T.); +#1422 = ORIENTED_EDGE('',*,*,#1423,.T.); +#1423 = EDGE_CURVE('',#837,#1424,#1426,.T.); +#1424 = VERTEX_POINT('',#1425); +#1425 = CARTESIAN_POINT('',(0.505,3.17,22.35)); +#1426 = LINE('',#1427,#1428); +#1427 = CARTESIAN_POINT('',(-4.9575,3.17,16.8875)); +#1428 = VECTOR('',#1429,1.); +#1429 = DIRECTION('',(0.707106781187,0.E+000,0.707106781187)); +#1430 = ORIENTED_EDGE('',*,*,#1431,.T.); +#1431 = EDGE_CURVE('',#1424,#1432,#1434,.T.); +#1432 = VERTEX_POINT('',#1433); +#1433 = CARTESIAN_POINT('',(10.445,3.17,22.35)); +#1434 = LINE('',#1435,#1436); +#1435 = CARTESIAN_POINT('',(-1.995,3.17,22.35)); +#1436 = VECTOR('',#1437,1.); +#1437 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1438 = ORIENTED_EDGE('',*,*,#1439,.F.); +#1439 = EDGE_CURVE('',#918,#1432,#1440,.T.); +#1440 = LINE('',#1441,#1442); +#1441 = CARTESIAN_POINT('',(12.1725,3.17,20.6225)); +#1442 = VECTOR('',#1443,1.); +#1443 = DIRECTION('',(-0.707106781187,0.E+000,0.707106781187)); +#1444 = ORIENTED_EDGE('',*,*,#917,.F.); +#1445 = FACE_BOUND('',#1446,.T.); +#1446 = EDGE_LOOP('',(#1447)); +#1447 = ORIENTED_EDGE('',*,*,#1448,.T.); +#1448 = EDGE_CURVE('',#1449,#1449,#1451,.T.); +#1449 = VERTEX_POINT('',#1450); +#1450 = CARTESIAN_POINT('',(7.5,3.17,18.2)); +#1451 = CIRCLE('',#1452,2.025); +#1452 = AXIS2_PLACEMENT_3D('',#1453,#1454,#1455); +#1453 = CARTESIAN_POINT('',(5.475,3.17,18.2)); +#1454 = DIRECTION('',(0.E+000,-1.,2.22044604925E-016)); +#1455 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1456 = PLANE('',#1457); +#1457 = AXIS2_PLACEMENT_3D('',#1458,#1459,#1460); +#1458 = CARTESIAN_POINT('',(-1.995,3.17,3.)); +#1459 = DIRECTION('',(0.E+000,1.,0.E+000)); +#1460 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1461 = ADVANCED_FACE('',(#1462),#1473,.T.); +#1462 = FACE_BOUND('',#1463,.T.); +#1463 = EDGE_LOOP('',(#1464,#1465,#1471,#1472)); +#1464 = ORIENTED_EDGE('',*,*,#883,.F.); +#1465 = ORIENTED_EDGE('',*,*,#1466,.T.); +#1466 = EDGE_CURVE('',#876,#1424,#1467,.T.); +#1467 = LINE('',#1468,#1469); +#1468 = CARTESIAN_POINT('',(0.505,1.9,22.35)); +#1469 = VECTOR('',#1470,1.); +#1470 = DIRECTION('',(0.E+000,1.,-2.22044604925E-016)); +#1471 = ORIENTED_EDGE('',*,*,#1423,.F.); +#1472 = ORIENTED_EDGE('',*,*,#836,.F.); +#1473 = PLANE('',#1474); +#1474 = AXIS2_PLACEMENT_3D('',#1475,#1476,#1477); +#1475 = CARTESIAN_POINT('',(0.505,1.9,22.35)); +#1476 = DIRECTION('',(-0.707106781187,1.570092458684E-016,0.707106781187 + )); +#1477 = DIRECTION('',(-0.707106781187,-1.570092458684E-016, + -0.707106781187)); +#1478 = ADVANCED_FACE('',(#1479),#1490,.T.); +#1479 = FACE_BOUND('',#1480,.T.); +#1480 = EDGE_LOOP('',(#1481,#1482,#1483,#1484)); +#1481 = ORIENTED_EDGE('',*,*,#1431,.F.); +#1482 = ORIENTED_EDGE('',*,*,#1466,.F.); +#1483 = ORIENTED_EDGE('',*,*,#875,.F.); +#1484 = ORIENTED_EDGE('',*,*,#1485,.T.); +#1485 = EDGE_CURVE('',#868,#1432,#1486,.T.); +#1486 = LINE('',#1487,#1488); +#1487 = CARTESIAN_POINT('',(10.445,1.9,22.35)); +#1488 = VECTOR('',#1489,1.); +#1489 = DIRECTION('',(0.E+000,1.,-2.22044604925E-016)); +#1490 = PLANE('',#1491); +#1491 = AXIS2_PLACEMENT_3D('',#1492,#1493,#1494); +#1492 = CARTESIAN_POINT('',(-1.995,3.17,22.35)); +#1493 = DIRECTION('',(0.E+000,0.E+000,1.)); +#1494 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1495 = ADVANCED_FACE('',(#1496),#1502,.F.); +#1496 = FACE_BOUND('',#1497,.F.); +#1497 = EDGE_LOOP('',(#1498,#1499,#1500,#1501)); +#1498 = ORIENTED_EDGE('',*,*,#867,.F.); +#1499 = ORIENTED_EDGE('',*,*,#1485,.T.); +#1500 = ORIENTED_EDGE('',*,*,#1439,.F.); +#1501 = ORIENTED_EDGE('',*,*,#925,.F.); +#1502 = PLANE('',#1503); +#1503 = AXIS2_PLACEMENT_3D('',#1504,#1505,#1506); +#1504 = CARTESIAN_POINT('',(10.445,1.9,22.35)); +#1505 = DIRECTION('',(-0.707106781187,-1.570092458684E-016, + -0.707106781187)); +#1506 = DIRECTION('',(0.707106781187,-1.570092458684E-016, + -0.707106781187)); +#1507 = ADVANCED_FACE('',(#1508),#1519,.F.); +#1508 = FACE_BOUND('',#1509,.F.); +#1509 = EDGE_LOOP('',(#1510,#1511,#1517,#1518)); +#1510 = ORIENTED_EDGE('',*,*,#892,.F.); +#1511 = ORIENTED_EDGE('',*,*,#1512,.T.); +#1512 = EDGE_CURVE('',#893,#1449,#1513,.T.); +#1513 = LINE('',#1514,#1515); +#1514 = CARTESIAN_POINT('',(7.5,1.9,18.2)); +#1515 = VECTOR('',#1516,1.); +#1516 = DIRECTION('',(0.E+000,1.,-2.22044604925E-016)); +#1517 = ORIENTED_EDGE('',*,*,#1448,.T.); +#1518 = ORIENTED_EDGE('',*,*,#1512,.F.); +#1519 = CYLINDRICAL_SURFACE('',#1520,2.025); +#1520 = AXIS2_PLACEMENT_3D('',#1521,#1522,#1523); +#1521 = CARTESIAN_POINT('',(5.475,1.9,18.2)); +#1522 = DIRECTION('',(0.E+000,-1.,2.22044604925E-016)); +#1523 = DIRECTION('',(1.,0.E+000,0.E+000)); +#1524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#1528)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#1525,#1526,#1527)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#1525 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#1526 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#1527 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#1528 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#1525, + 'distance_accuracy_value','confusion accuracy'); +#1529 = PRODUCT_TYPE('part',$,(#7)); +#1530 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #1531,#1539,#1546,#1553,#1560,#1567,#1574,#1581,#1588,#1596,#1603, + #1610,#1617,#1624,#1631,#1638,#1645,#1652,#1659,#1666,#1673,#1680, + #1687,#1694,#1701,#1708,#1715,#1722,#1729,#1736,#1743,#1750,#1757, + #1764,#1771,#1778,#1785,#1792,#1799,#1806,#1813,#1820,#1827,#1834, + #1841,#1848,#1855),#1524); +#1531 = STYLED_ITEM('color',(#1532),#17); +#1532 = PRESENTATION_STYLE_ASSIGNMENT((#1533)); +#1533 = SURFACE_STYLE_USAGE(.BOTH.,#1534); +#1534 = SURFACE_SIDE_STYLE('',(#1535)); +#1535 = SURFACE_STYLE_FILL_AREA(#1536); +#1536 = FILL_AREA_STYLE('',(#1537)); +#1537 = FILL_AREA_STYLE_COLOUR('',#1538); +#1538 = COLOUR_RGB('',0.148000001907,0.144999995828,0.144999995828); +#1539 = STYLED_ITEM('color',(#1540),#73); +#1540 = PRESENTATION_STYLE_ASSIGNMENT((#1541)); +#1541 = SURFACE_STYLE_USAGE(.BOTH.,#1542); +#1542 = SURFACE_SIDE_STYLE('',(#1543)); +#1543 = SURFACE_STYLE_FILL_AREA(#1544); +#1544 = FILL_AREA_STYLE('',(#1545)); +#1545 = FILL_AREA_STYLE_COLOUR('',#1538); +#1546 = STYLED_ITEM('color',(#1547),#200); +#1547 = PRESENTATION_STYLE_ASSIGNMENT((#1548)); +#1548 = SURFACE_STYLE_USAGE(.BOTH.,#1549); +#1549 = SURFACE_SIDE_STYLE('',(#1550)); +#1550 = SURFACE_STYLE_FILL_AREA(#1551); +#1551 = FILL_AREA_STYLE('',(#1552)); +#1552 = FILL_AREA_STYLE_COLOUR('',#1538); +#1553 = STYLED_ITEM('color',(#1554),#224); +#1554 = PRESENTATION_STYLE_ASSIGNMENT((#1555)); +#1555 = SURFACE_STYLE_USAGE(.BOTH.,#1556); +#1556 = SURFACE_SIDE_STYLE('',(#1557)); +#1557 = SURFACE_STYLE_FILL_AREA(#1558); +#1558 = FILL_AREA_STYLE('',(#1559)); +#1559 = FILL_AREA_STYLE_COLOUR('',#1538); +#1560 = STYLED_ITEM('color',(#1561),#248); +#1561 = PRESENTATION_STYLE_ASSIGNMENT((#1562)); +#1562 = SURFACE_STYLE_USAGE(.BOTH.,#1563); +#1563 = SURFACE_SIDE_STYLE('',(#1564)); +#1564 = SURFACE_STYLE_FILL_AREA(#1565); +#1565 = FILL_AREA_STYLE('',(#1566)); +#1566 = FILL_AREA_STYLE_COLOUR('',#1538); +#1567 = STYLED_ITEM('color',(#1568),#304); +#1568 = PRESENTATION_STYLE_ASSIGNMENT((#1569)); +#1569 = SURFACE_STYLE_USAGE(.BOTH.,#1570); +#1570 = SURFACE_SIDE_STYLE('',(#1571)); +#1571 = SURFACE_STYLE_FILL_AREA(#1572); +#1572 = FILL_AREA_STYLE('',(#1573)); +#1573 = FILL_AREA_STYLE_COLOUR('',#1538); +#1574 = STYLED_ITEM('color',(#1575),#351); +#1575 = PRESENTATION_STYLE_ASSIGNMENT((#1576)); +#1576 = SURFACE_STYLE_USAGE(.BOTH.,#1577); +#1577 = SURFACE_SIDE_STYLE('',(#1578)); +#1578 = SURFACE_STYLE_FILL_AREA(#1579); +#1579 = FILL_AREA_STYLE('',(#1580)); +#1580 = FILL_AREA_STYLE_COLOUR('',#1538); +#1581 = STYLED_ITEM('color',(#1582),#437); +#1582 = PRESENTATION_STYLE_ASSIGNMENT((#1583)); +#1583 = SURFACE_STYLE_USAGE(.BOTH.,#1584); +#1584 = SURFACE_SIDE_STYLE('',(#1585)); +#1585 = SURFACE_STYLE_FILL_AREA(#1586); +#1586 = FILL_AREA_STYLE('',(#1587)); +#1587 = FILL_AREA_STYLE_COLOUR('',#1538); +#1588 = STYLED_ITEM('color',(#1589),#451); +#1589 = PRESENTATION_STYLE_ASSIGNMENT((#1590)); +#1590 = SURFACE_STYLE_USAGE(.BOTH.,#1591); +#1591 = SURFACE_SIDE_STYLE('',(#1592)); +#1592 = SURFACE_STYLE_FILL_AREA(#1593); +#1593 = FILL_AREA_STYLE('',(#1594)); +#1594 = FILL_AREA_STYLE_COLOUR('',#1595); +#1595 = COLOUR_RGB('',0.824000000954,0.819999992847,0.78100001812); +#1596 = STYLED_ITEM('color',(#1597),#483); +#1597 = PRESENTATION_STYLE_ASSIGNMENT((#1598)); +#1598 = SURFACE_STYLE_USAGE(.BOTH.,#1599); +#1599 = SURFACE_SIDE_STYLE('',(#1600)); +#1600 = SURFACE_STYLE_FILL_AREA(#1601); +#1601 = FILL_AREA_STYLE('',(#1602)); +#1602 = FILL_AREA_STYLE_COLOUR('',#1595); +#1603 = STYLED_ITEM('color',(#1604),#547); +#1604 = PRESENTATION_STYLE_ASSIGNMENT((#1605)); +#1605 = SURFACE_STYLE_USAGE(.BOTH.,#1606); +#1606 = SURFACE_SIDE_STYLE('',(#1607)); +#1607 = SURFACE_STYLE_FILL_AREA(#1608); +#1608 = FILL_AREA_STYLE('',(#1609)); +#1609 = FILL_AREA_STYLE_COLOUR('',#1595); +#1610 = STYLED_ITEM('color',(#1611),#572); +#1611 = PRESENTATION_STYLE_ASSIGNMENT((#1612)); +#1612 = SURFACE_STYLE_USAGE(.BOTH.,#1613); +#1613 = SURFACE_SIDE_STYLE('',(#1614)); +#1614 = SURFACE_STYLE_FILL_AREA(#1615); +#1615 = FILL_AREA_STYLE('',(#1616)); +#1616 = FILL_AREA_STYLE_COLOUR('',#1595); +#1617 = STYLED_ITEM('color',(#1618),#604); +#1618 = PRESENTATION_STYLE_ASSIGNMENT((#1619)); +#1619 = SURFACE_STYLE_USAGE(.BOTH.,#1620); +#1620 = SURFACE_SIDE_STYLE('',(#1621)); +#1621 = SURFACE_STYLE_FILL_AREA(#1622); +#1622 = FILL_AREA_STYLE('',(#1623)); +#1623 = FILL_AREA_STYLE_COLOUR('',#1595); +#1624 = STYLED_ITEM('color',(#1625),#668); +#1625 = PRESENTATION_STYLE_ASSIGNMENT((#1626)); +#1626 = SURFACE_STYLE_USAGE(.BOTH.,#1627); +#1627 = SURFACE_SIDE_STYLE('',(#1628)); +#1628 = SURFACE_STYLE_FILL_AREA(#1629); +#1629 = FILL_AREA_STYLE('',(#1630)); +#1630 = FILL_AREA_STYLE_COLOUR('',#1595); +#1631 = STYLED_ITEM('color',(#1632),#693); +#1632 = PRESENTATION_STYLE_ASSIGNMENT((#1633)); +#1633 = SURFACE_STYLE_USAGE(.BOTH.,#1634); +#1634 = SURFACE_SIDE_STYLE('',(#1635)); +#1635 = SURFACE_STYLE_FILL_AREA(#1636); +#1636 = FILL_AREA_STYLE('',(#1637)); +#1637 = FILL_AREA_STYLE_COLOUR('',#1595); +#1638 = STYLED_ITEM('color',(#1639),#725); +#1639 = PRESENTATION_STYLE_ASSIGNMENT((#1640)); +#1640 = SURFACE_STYLE_USAGE(.BOTH.,#1641); +#1641 = SURFACE_SIDE_STYLE('',(#1642)); +#1642 = SURFACE_STYLE_FILL_AREA(#1643); +#1643 = FILL_AREA_STYLE('',(#1644)); +#1644 = FILL_AREA_STYLE_COLOUR('',#1595); +#1645 = STYLED_ITEM('color',(#1646),#789); +#1646 = PRESENTATION_STYLE_ASSIGNMENT((#1647)); +#1647 = SURFACE_STYLE_USAGE(.BOTH.,#1648); +#1648 = SURFACE_SIDE_STYLE('',(#1649)); +#1649 = SURFACE_STYLE_FILL_AREA(#1650); +#1650 = FILL_AREA_STYLE('',(#1651)); +#1651 = FILL_AREA_STYLE_COLOUR('',#1595); +#1652 = STYLED_ITEM('color',(#1653),#814); +#1653 = PRESENTATION_STYLE_ASSIGNMENT((#1654)); +#1654 = SURFACE_STYLE_USAGE(.BOTH.,#1655); +#1655 = SURFACE_SIDE_STYLE('',(#1656)); +#1656 = SURFACE_STYLE_FILL_AREA(#1657); +#1657 = FILL_AREA_STYLE('',(#1658)); +#1658 = FILL_AREA_STYLE_COLOUR('',#1595); +#1659 = STYLED_ITEM('color',(#1660),#854); +#1660 = PRESENTATION_STYLE_ASSIGNMENT((#1661)); +#1661 = SURFACE_STYLE_USAGE(.BOTH.,#1662); +#1662 = SURFACE_SIDE_STYLE('',(#1663)); +#1663 = SURFACE_STYLE_FILL_AREA(#1664); +#1664 = FILL_AREA_STYLE('',(#1665)); +#1665 = FILL_AREA_STYLE_COLOUR('',#1595); +#1666 = STYLED_ITEM('color',(#1667),#905); +#1667 = PRESENTATION_STYLE_ASSIGNMENT((#1668)); +#1668 = SURFACE_STYLE_USAGE(.BOTH.,#1669); +#1669 = SURFACE_SIDE_STYLE('',(#1670)); +#1670 = SURFACE_STYLE_FILL_AREA(#1671); +#1671 = FILL_AREA_STYLE('',(#1672)); +#1672 = FILL_AREA_STYLE_COLOUR('',#1595); +#1673 = STYLED_ITEM('color',(#1674),#938); +#1674 = PRESENTATION_STYLE_ASSIGNMENT((#1675)); +#1675 = SURFACE_STYLE_USAGE(.BOTH.,#1676); +#1676 = SURFACE_SIDE_STYLE('',(#1677)); +#1677 = SURFACE_STYLE_FILL_AREA(#1678); +#1678 = FILL_AREA_STYLE('',(#1679)); +#1679 = FILL_AREA_STYLE_COLOUR('',#1595); +#1680 = STYLED_ITEM('color',(#1681),#955); +#1681 = PRESENTATION_STYLE_ASSIGNMENT((#1682)); +#1682 = SURFACE_STYLE_USAGE(.BOTH.,#1683); +#1683 = SURFACE_SIDE_STYLE('',(#1684)); +#1684 = SURFACE_STYLE_FILL_AREA(#1685); +#1685 = FILL_AREA_STYLE('',(#1686)); +#1686 = FILL_AREA_STYLE_COLOUR('',#1595); +#1687 = STYLED_ITEM('color',(#1688),#1012); +#1688 = PRESENTATION_STYLE_ASSIGNMENT((#1689)); +#1689 = SURFACE_STYLE_USAGE(.BOTH.,#1690); +#1690 = SURFACE_SIDE_STYLE('',(#1691)); +#1691 = SURFACE_STYLE_FILL_AREA(#1692); +#1692 = FILL_AREA_STYLE('',(#1693)); +#1693 = FILL_AREA_STYLE_COLOUR('',#1595); +#1694 = STYLED_ITEM('color',(#1695),#1069); +#1695 = PRESENTATION_STYLE_ASSIGNMENT((#1696)); +#1696 = SURFACE_STYLE_USAGE(.BOTH.,#1697); +#1697 = SURFACE_SIDE_STYLE('',(#1698)); +#1698 = SURFACE_STYLE_FILL_AREA(#1699); +#1699 = FILL_AREA_STYLE('',(#1700)); +#1700 = FILL_AREA_STYLE_COLOUR('',#1595); +#1701 = STYLED_ITEM('color',(#1702),#1126); +#1702 = PRESENTATION_STYLE_ASSIGNMENT((#1703)); +#1703 = SURFACE_STYLE_USAGE(.BOTH.,#1704); +#1704 = SURFACE_SIDE_STYLE('',(#1705)); +#1705 = SURFACE_STYLE_FILL_AREA(#1706); +#1706 = FILL_AREA_STYLE('',(#1707)); +#1707 = FILL_AREA_STYLE_COLOUR('',#1595); +#1708 = STYLED_ITEM('color',(#1709),#1143); +#1709 = PRESENTATION_STYLE_ASSIGNMENT((#1710)); +#1710 = SURFACE_STYLE_USAGE(.BOTH.,#1711); +#1711 = SURFACE_SIDE_STYLE('',(#1712)); +#1712 = SURFACE_STYLE_FILL_AREA(#1713); +#1713 = FILL_AREA_STYLE('',(#1714)); +#1714 = FILL_AREA_STYLE_COLOUR('',#1595); +#1715 = STYLED_ITEM('color',(#1716),#1160); +#1716 = PRESENTATION_STYLE_ASSIGNMENT((#1717)); +#1717 = SURFACE_STYLE_USAGE(.BOTH.,#1718); +#1718 = SURFACE_SIDE_STYLE('',(#1719)); +#1719 = SURFACE_STYLE_FILL_AREA(#1720); +#1720 = FILL_AREA_STYLE('',(#1721)); +#1721 = FILL_AREA_STYLE_COLOUR('',#1595); +#1722 = STYLED_ITEM('color',(#1723),#1177); +#1723 = PRESENTATION_STYLE_ASSIGNMENT((#1724)); +#1724 = SURFACE_STYLE_USAGE(.BOTH.,#1725); +#1725 = SURFACE_SIDE_STYLE('',(#1726)); +#1726 = SURFACE_STYLE_FILL_AREA(#1727); +#1727 = FILL_AREA_STYLE('',(#1728)); +#1728 = FILL_AREA_STYLE_COLOUR('',#1595); +#1729 = STYLED_ITEM('color',(#1730),#1194); +#1730 = PRESENTATION_STYLE_ASSIGNMENT((#1731)); +#1731 = SURFACE_STYLE_USAGE(.BOTH.,#1732); +#1732 = SURFACE_SIDE_STYLE('',(#1733)); +#1733 = SURFACE_STYLE_FILL_AREA(#1734); +#1734 = FILL_AREA_STYLE('',(#1735)); +#1735 = FILL_AREA_STYLE_COLOUR('',#1595); +#1736 = STYLED_ITEM('color',(#1737),#1211); +#1737 = PRESENTATION_STYLE_ASSIGNMENT((#1738)); +#1738 = SURFACE_STYLE_USAGE(.BOTH.,#1739); +#1739 = SURFACE_SIDE_STYLE('',(#1740)); +#1740 = SURFACE_STYLE_FILL_AREA(#1741); +#1741 = FILL_AREA_STYLE('',(#1742)); +#1742 = FILL_AREA_STYLE_COLOUR('',#1595); +#1743 = STYLED_ITEM('color',(#1744),#1223); +#1744 = PRESENTATION_STYLE_ASSIGNMENT((#1745)); +#1745 = SURFACE_STYLE_USAGE(.BOTH.,#1746); +#1746 = SURFACE_SIDE_STYLE('',(#1747)); +#1747 = SURFACE_STYLE_FILL_AREA(#1748); +#1748 = FILL_AREA_STYLE('',(#1749)); +#1749 = FILL_AREA_STYLE_COLOUR('',#1595); +#1750 = STYLED_ITEM('color',(#1751),#1240); +#1751 = PRESENTATION_STYLE_ASSIGNMENT((#1752)); +#1752 = SURFACE_STYLE_USAGE(.BOTH.,#1753); +#1753 = SURFACE_SIDE_STYLE('',(#1754)); +#1754 = SURFACE_STYLE_FILL_AREA(#1755); +#1755 = FILL_AREA_STYLE('',(#1756)); +#1756 = FILL_AREA_STYLE_COLOUR('',#1595); +#1757 = STYLED_ITEM('color',(#1758),#1257); +#1758 = PRESENTATION_STYLE_ASSIGNMENT((#1759)); +#1759 = SURFACE_STYLE_USAGE(.BOTH.,#1760); +#1760 = SURFACE_SIDE_STYLE('',(#1761)); +#1761 = SURFACE_STYLE_FILL_AREA(#1762); +#1762 = FILL_AREA_STYLE('',(#1763)); +#1763 = FILL_AREA_STYLE_COLOUR('',#1595); +#1764 = STYLED_ITEM('color',(#1765),#1274); +#1765 = PRESENTATION_STYLE_ASSIGNMENT((#1766)); +#1766 = SURFACE_STYLE_USAGE(.BOTH.,#1767); +#1767 = SURFACE_SIDE_STYLE('',(#1768)); +#1768 = SURFACE_STYLE_FILL_AREA(#1769); +#1769 = FILL_AREA_STYLE('',(#1770)); +#1770 = FILL_AREA_STYLE_COLOUR('',#1595); +#1771 = STYLED_ITEM('color',(#1772),#1291); +#1772 = PRESENTATION_STYLE_ASSIGNMENT((#1773)); +#1773 = SURFACE_STYLE_USAGE(.BOTH.,#1774); +#1774 = SURFACE_SIDE_STYLE('',(#1775)); +#1775 = SURFACE_STYLE_FILL_AREA(#1776); +#1776 = FILL_AREA_STYLE('',(#1777)); +#1777 = FILL_AREA_STYLE_COLOUR('',#1595); +#1778 = STYLED_ITEM('color',(#1779),#1308); +#1779 = PRESENTATION_STYLE_ASSIGNMENT((#1780)); +#1780 = SURFACE_STYLE_USAGE(.BOTH.,#1781); +#1781 = SURFACE_SIDE_STYLE('',(#1782)); +#1782 = SURFACE_STYLE_FILL_AREA(#1783); +#1783 = FILL_AREA_STYLE('',(#1784)); +#1784 = FILL_AREA_STYLE_COLOUR('',#1595); +#1785 = STYLED_ITEM('color',(#1786),#1320); +#1786 = PRESENTATION_STYLE_ASSIGNMENT((#1787)); +#1787 = SURFACE_STYLE_USAGE(.BOTH.,#1788); +#1788 = SURFACE_SIDE_STYLE('',(#1789)); +#1789 = SURFACE_STYLE_FILL_AREA(#1790); +#1790 = FILL_AREA_STYLE('',(#1791)); +#1791 = FILL_AREA_STYLE_COLOUR('',#1595); +#1792 = STYLED_ITEM('color',(#1793),#1337); +#1793 = PRESENTATION_STYLE_ASSIGNMENT((#1794)); +#1794 = SURFACE_STYLE_USAGE(.BOTH.,#1795); +#1795 = SURFACE_SIDE_STYLE('',(#1796)); +#1796 = SURFACE_STYLE_FILL_AREA(#1797); +#1797 = FILL_AREA_STYLE('',(#1798)); +#1798 = FILL_AREA_STYLE_COLOUR('',#1595); +#1799 = STYLED_ITEM('color',(#1800),#1359); +#1800 = PRESENTATION_STYLE_ASSIGNMENT((#1801)); +#1801 = SURFACE_STYLE_USAGE(.BOTH.,#1802); +#1802 = SURFACE_SIDE_STYLE('',(#1803)); +#1803 = SURFACE_STYLE_FILL_AREA(#1804); +#1804 = FILL_AREA_STYLE('',(#1805)); +#1805 = FILL_AREA_STYLE_COLOUR('',#1595); +#1806 = STYLED_ITEM('color',(#1807),#1376); +#1807 = PRESENTATION_STYLE_ASSIGNMENT((#1808)); +#1808 = SURFACE_STYLE_USAGE(.BOTH.,#1809); +#1809 = SURFACE_SIDE_STYLE('',(#1810)); +#1810 = SURFACE_STYLE_FILL_AREA(#1811); +#1811 = FILL_AREA_STYLE('',(#1812)); +#1812 = FILL_AREA_STYLE_COLOUR('',#1595); +#1813 = STYLED_ITEM('color',(#1814),#1393); +#1814 = PRESENTATION_STYLE_ASSIGNMENT((#1815)); +#1815 = SURFACE_STYLE_USAGE(.BOTH.,#1816); +#1816 = SURFACE_SIDE_STYLE('',(#1817)); +#1817 = SURFACE_STYLE_FILL_AREA(#1818); +#1818 = FILL_AREA_STYLE('',(#1819)); +#1819 = FILL_AREA_STYLE_COLOUR('',#1595); +#1820 = STYLED_ITEM('color',(#1821),#1405); +#1821 = PRESENTATION_STYLE_ASSIGNMENT((#1822)); +#1822 = SURFACE_STYLE_USAGE(.BOTH.,#1823); +#1823 = SURFACE_SIDE_STYLE('',(#1824)); +#1824 = SURFACE_STYLE_FILL_AREA(#1825); +#1825 = FILL_AREA_STYLE('',(#1826)); +#1826 = FILL_AREA_STYLE_COLOUR('',#1595); +#1827 = STYLED_ITEM('color',(#1828),#1417); +#1828 = PRESENTATION_STYLE_ASSIGNMENT((#1829)); +#1829 = SURFACE_STYLE_USAGE(.BOTH.,#1830); +#1830 = SURFACE_SIDE_STYLE('',(#1831)); +#1831 = SURFACE_STYLE_FILL_AREA(#1832); +#1832 = FILL_AREA_STYLE('',(#1833)); +#1833 = FILL_AREA_STYLE_COLOUR('',#1595); +#1834 = STYLED_ITEM('color',(#1835),#1461); +#1835 = PRESENTATION_STYLE_ASSIGNMENT((#1836)); +#1836 = SURFACE_STYLE_USAGE(.BOTH.,#1837); +#1837 = SURFACE_SIDE_STYLE('',(#1838)); +#1838 = SURFACE_STYLE_FILL_AREA(#1839); +#1839 = FILL_AREA_STYLE('',(#1840)); +#1840 = FILL_AREA_STYLE_COLOUR('',#1595); +#1841 = STYLED_ITEM('color',(#1842),#1478); +#1842 = PRESENTATION_STYLE_ASSIGNMENT((#1843)); +#1843 = SURFACE_STYLE_USAGE(.BOTH.,#1844); +#1844 = SURFACE_SIDE_STYLE('',(#1845)); +#1845 = SURFACE_STYLE_FILL_AREA(#1846); +#1846 = FILL_AREA_STYLE('',(#1847)); +#1847 = FILL_AREA_STYLE_COLOUR('',#1595); +#1848 = STYLED_ITEM('color',(#1849),#1495); +#1849 = PRESENTATION_STYLE_ASSIGNMENT((#1850)); +#1850 = SURFACE_STYLE_USAGE(.BOTH.,#1851); +#1851 = SURFACE_SIDE_STYLE('',(#1852)); +#1852 = SURFACE_STYLE_FILL_AREA(#1853); +#1853 = FILL_AREA_STYLE('',(#1854)); +#1854 = FILL_AREA_STYLE_COLOUR('',#1595); +#1855 = STYLED_ITEM('color',(#1856),#1507); +#1856 = PRESENTATION_STYLE_ASSIGNMENT((#1857)); +#1857 = SURFACE_STYLE_USAGE(.BOTH.,#1858); +#1858 = SURFACE_SIDE_STYLE('',(#1859)); +#1859 = SURFACE_STYLE_FILL_AREA(#1860); +#1860 = FILL_AREA_STYLE('',(#1861)); +#1861 = FILL_AREA_STYLE_COLOUR('',#1595); +ENDSEC; +END-ISO-10303-21;
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>q4040j7tp</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>q4040j7tp</title>