PY25Q128HA-SUH-IR

@@ -0,0 +1,70 @@+# PY25Q128HA-SUH-IR++**PUYA** · NOR FLASH · SOP-8-208mil++PY25Q128HA-SUH-IR from PUYA, in a SOP-8-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | CS# | input | Active-low chip select. Drive low to select the device for an SPI/QSPI transaction; when high the device is deselected, SO is high-Z and the part enters standby (I_SB typ 15 uA). |+| 2 | SO/SIO1 | bidirectional | Serial data output in Standard SPI (single-bit read/write); becomes bidirectional IO1 in Dual/Quad SPI, QPI and DTR modes. Push-pull CMOS driver, V_OH >= VCC-0.2 V at -100 uA. |+| 3 | WP#/SIO2 | bidirectional | Active-low write protect input in Standard/Dual SPI modes; enables hardware protection of the status register when combined with the SRP bits. Becomes bidirectional IO2 in Quad SPI / QPI / DTR read modes. |+| 4 | GND | power_in | Device ground. Tie to the system 0 V reference. |+| 5 | SI/SIO0 | bidirectional | Serial data input in Standard SPI (receives opcodes, addresses and data on SCLK rising edges); becomes bidirectional IO0 in Dual/Quad SPI, QPI and DTR modes. CMOS input, V_IH >= 0.7*VCC. |+| 6 | SCLK | input | Serial interface clock input. Data on SI/IOn is latched on rising edges and output on SO/IOn on falling edges (SPI modes 0 and 3). Max 133 MHz for STR Quad read, 66 MHz for DTR. |+| 7 | HOLD#/RESET#/SIO3 | bidirectional | Active-low HOLD# input pauses the current transaction without deselecting the device; can be reconfigured as an active-low hardware RESET# input, or as bidirectional IO3 in Quad SPI / QPI / DTR read modes. |+| 8 | VCC | power_in | Core and I/O supply, 2.7 V to 3.6 V. Bypass locally with a 100 nF ceramic capacitor to GND. Read current typ 3-10.5 mA depending on frequency/mode; standby typ 15 uA; deep-power-down typ 1 uA. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | PUYA |+| Package | SOP-8-208mil |+| Category | Memory |+| Pins | 8 |++## Ordering variants++- `PY25Q128HA-SUH-IRSUH-IT`+- `PY25Q128HA-SUH-IRSUH-IR`+- `PY25Q128HA-SUH-IRSUY-IT`+- `PY25Q128HA-SUH-IRSUY-IR`+- `PY25Q128HA-SUH-IRSUH-IY`+- `PY25Q128HA-SUH-IRSUY-IY`+- `PY25Q128HA-SUH-IRSUH-KT`+- `PY25Q128HA-SUH-IRSUH-KR`+- `PY25Q128HA-SUH-IRSUH-KY`+- `PY25Q128HA-SUH-IRSSH-IT`+- `PY25Q128HA-SUH-IRSSH-IR`+- `PY25Q128HA-SUH-IRSSH-KT`+- `PY25Q128HA-SUH-IRSSH-KR`+- `PY25Q128HA-SUH-IRSMH-IT`+- `PY25Q128HA-SUH-IRSMH-IR`+- `PY25Q128HA-SUH-IRSMY-IT`+- `PY25Q128HA-SUH-IRSMY-IR`+- `PY25Q128HA-SUH-IRSMH-KT`+- `PY25Q128HA-SUH-IRSMH-KR`+- `PY25Q128HA-SUH-IRWXH-IR`+- `PY25Q128HA-SUH-IRWXY-IR`+- `PY25Q128HA-SUH-IRWZH-IR`+- `PY25Q128HA-SUH-IRQVH-IR`+- `PY25Q128HA-SUH-IRDFH-IR`++## CAD (KiCad official)++- Symbol: `PY25Q128HA-SUH-IR`+- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`+- 3D model: SOP-8-208mil (KiCad packages3D, STEP)++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [PUYA datasheet](docs/py25q128ha-suh-ir-datasheet.pdf) (109 pp, sha256 `469dc5e359657a00`, retrieved 2026-08-17, tier: lcsc)+- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/py25q128ha-suh-ir-datasheet.pdf)

@@ -0,0 +1,34 @@+{+  "slug": "py25q128ha-suh-ir",+  "version": "0.1.0",+  "type": "component",+  "description": "PUYA NOR FLASH, SOP-8-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "memory",+    "py25q128ha-suh-ir"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "py25q128ha-suh-ir.kicad_sym",+    "py25q128ha-suh-ir.kicad_mod",+    "py25q128ha-suh-ir.glb",+    "py25q128ha-suh-ir.step",+    "py25q128ha-suh-ir.lbr",+    "docs/hero.png",+    "docs/py25q128ha-suh-ir-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "visibility": "public",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file