component
PTV09A-4225F-B104
Public Made by Adomby adom
BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.1
11 files changed
+189−178
README.md+11−12@@ -8,9 +8,9 @@ PTV09A-4225F-B104 from BOURNS, in a THT. Pinout and pin descriptions extracted f | Pin | Name | Type | Function | |---|---|---|---|-| 1 | Terminal 1 | passive | Terminal 1 is one end of the resistive element, and the taper graphs measure voltage from terminal 1 to terminal 3 as the input span. |-| 2 | Terminal 2 | passive | Terminal 2 is the wiper, and the taper graphs label the terminal 1-2 voltage as the output voltage. |-| 3 | Terminal 3 | passive | Terminal 3 is the other end of the resistive element, and the taper graphs label the terminal 1-3 voltage as the input voltage. |+| 1 | 1 | passive | Resistive element end terminal and the common reference for the taper curves (output 1-2 measured against input 1-3); 20 VDC / 50 VAC max operating voltage, 0.05 W rating. |+| 2 | 2 | passive | Wiper terminal that provides the output voltage measured between terminals 1-2 as a percentage of the 1-3 input voltage over 280° ±10° mechanical angle. |+| 3 | 3 | passive | Opposite resistive element end terminal, with terminals 1-3 forming the input voltage across the element (20 VDC / 50 VAC max, 0.05 W). | ## Key specifications @@ -27,19 +27,18 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Standard Resistance | R | | 100000 | | ohm | Code 104 (B104) | 1 |-| Standard Resistance Tolerance | | -20 | | 20 | % | | 1 |-| Residual Resistance | | | | 500 | ohm | | 1 |-| Residual Resistance | | -1 | | 1 | % | Alternative to 500 ohms, as printed | 1 |-| Sliding Noise | | | | 100 | mV | | 1 |-| Maximum Operating Voltage (Linear and Audio) | | | | 20 | VDC | Linear and Audio taper | 1 |-| Maximum Operating Voltage (Linear and Audio) | | | | 50 | VAC | Linear and Audio taper | 1 |-| Operating Temperature | T | -10 | | 50 | °C | | 1 |+| Standard resistance tolerance | | -20 | | 20 | % | | 1 |+| Residual resistance | | | | 500 | ohms | Printed as '500 ohms or ±1 % max.' | 1 |+| Sliding noise | | | | 100 | mV | | 1 |+| Operating temperature | | -10 | | 50 | °C | | 1 |+| Maximum operating voltage (linear and audio) | | | | 20 | VDC | Linear and Audio | 1 |+| Maximum operating voltage (linear and audio) | | | | 50 | VAC | Linear and Audio | 1 |+| Standard resistance (resistance code 104) | | | 100000 | | ohms | Resistance code 104 from standard resistance table | 1 | ## CAD (KiCad official) - Symbol: `PTV09A-4225F-B104`-- Footprint: `Adom_Gen:BOURNS_PTV09`+- Footprint: `Adom_Gen:Bourns_PTV09_4df4a4` - 3D model: THT (KiCad packages3D, STEP) ## Provenance
docs/hero.png⋯ 1 unchanged line ⋯
package.json+16−15@@ -1,6 +1,6 @@ { "slug": "ptv09a-4225f-b104",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -52,7 +52,7 @@ "mouser": "652-PTV09A-4225FB104" }, "distributor_check": {- "checked_at": "2026-11-05T23:07:22Z",+ "checked_at": "2026-11-05T23:24:12Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PTV09A-4225F-B104-ND",@@ -66,21 +66,21 @@ "pins": [ { "number": "1",- "name": "Terminal 1",+ "name": "1", "type": "passive",- "description": "Terminal 1 is one end of the resistive element, and the taper graphs measure voltage from terminal 1 to terminal 3 as the input span."+ "description": "Resistive element end terminal and the common reference for the taper curves (output 1-2 measured against input 1-3); 20 VDC / 50 VAC max operating voltage, 0.05 W rating." }, { "number": "2",- "name": "Terminal 2",+ "name": "2", "type": "passive",- "description": "Terminal 2 is the wiper, and the taper graphs label the terminal 1-2 voltage as the output voltage."+ "description": "Wiper terminal that provides the output voltage measured between terminals 1-2 as a percentage of the 1-3 input voltage over 280° ±10° mechanical angle." }, { "number": "3",- "name": "Terminal 3",+ "name": "3", "type": "passive",- "description": "Terminal 3 is the other end of the resistive element, and the taper graphs label the terminal 1-3 voltage as the input voltage."+ "description": "Opposite resistive element end terminal, with terminals 1-3 forming the input voltage across the element (20 VDC / 50 VAC max, 0.05 W)." } ], "provenance": {@@ -94,12 +94,13 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Code 4 in the MPN (PTV09A-4225F-B104) maps to Horizontal/Rear Mount, Bushingless (PTV09A-4 drawing).",- "footprint has thermal pad ['MP'] the extraction did not name"+ "extractor flagged: The datasheet prints only terminal numbers 1, 2 and 3 (schematic and horizontal PCB layout on page 1; Wiper designation of pin 2 and end designation of pins 1 and 3 are inferred from the taper graph lab; Pin types are set to passive because the datasheet does not classify the terminals; ERC class is an ",+ "footprint has thermal pad ['MP'] the extraction did not name",+ "1/3 pins cited to the wrong page (name found elsewhere): ['3:T3@p4']" ], "pages_sent": 5,- "cost_usd": 0.0356,- "at": "2026-11-05T23:07:14"+ "cost_usd": 0.0562,+ "at": "2026-11-05T23:24:06" }, "datasheet": { "url": "https://www.bourns.com/docs/product-datasheets/PTV09.pdf",@@ -129,13 +130,13 @@ "seat": "body on z = 0, through-hole leads below", "extents_mm": [ 10.2,- 8.0,+ 8.3, 14.4 ], "zmin_mm": -3.0,- "centre_offset_mm": 0.1,+ "centre_offset_mm": 0.05, "footprint_binding": "identity",- "sha256": "b2c24b64fe80a401d8a0bfab20d5029eb54f9c12c384d831ea374c86782d174b",+ "sha256": "7737a772adbc3b4d952896527c9c30c00db9394a7e2fd4b98f9a26f72bf6bdde", "checked": "2026-11-05", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }
page.json+19−18@@ -4,7 +4,7 @@ "slug": "ptv09a-4225f-b104", "title": "PTV09A-4225F-B104", "brief": "BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -35,7 +35,7 @@ "mouser": "652-PTV09A-4225FB104" }, "distributor_check": {- "checked_at": "2026-11-05T23:07:22Z",+ "checked_at": "2026-11-05T23:24:12Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PTV09A-4225F-B104-ND",@@ -49,21 +49,21 @@ "pins": [ { "number": "1",- "name": "Terminal 1",+ "name": "1", "type": "passive",- "description": "Terminal 1 is one end of the resistive element, and the taper graphs measure voltage from terminal 1 to terminal 3 as the input span."+ "description": "Resistive element end terminal and the common reference for the taper curves (output 1-2 measured against input 1-3); 20 VDC / 50 VAC max operating voltage, 0.05 W rating." }, { "number": "2",- "name": "Terminal 2",+ "name": "2", "type": "passive",- "description": "Terminal 2 is the wiper, and the taper graphs label the terminal 1-2 voltage as the output voltage."+ "description": "Wiper terminal that provides the output voltage measured between terminals 1-2 as a percentage of the 1-3 input voltage over 280° ±10° mechanical angle." }, { "number": "3",- "name": "Terminal 3",+ "name": "3", "type": "passive",- "description": "Terminal 3 is the other end of the resistive element, and the taper graphs label the terminal 1-3 voltage as the input voltage."+ "description": "Opposite resistive element end terminal, with terminals 1-3 forming the input voltage across the element (20 VDC / 50 VAC max, 0.05 W)." } ], "provenance": {@@ -77,12 +77,13 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Code 4 in the MPN (PTV09A-4225F-B104) maps to Horizontal/Rear Mount, Bushingless (PTV09A-4 drawing).",- "footprint has thermal pad ['MP'] the extraction did not name"+ "extractor flagged: The datasheet prints only terminal numbers 1, 2 and 3 (schematic and horizontal PCB layout on page 1; Wiper designation of pin 2 and end designation of pins 1 and 3 are inferred from the taper graph lab; Pin types are set to passive because the datasheet does not classify the terminals; ERC class is an ",+ "footprint has thermal pad ['MP'] the extraction did not name",+ "1/3 pins cited to the wrong page (name found elsewhere): ['3:T3@p4']" ], "pages_sent": 5,- "cost_usd": 0.0356,- "at": "2026-11-05T23:07:14"+ "cost_usd": 0.0562,+ "at": "2026-11-05T23:24:06" }, "datasheet": { "url": "https://www.bourns.com/docs/product-datasheets/PTV09.pdf",@@ -112,13 +113,13 @@ "seat": "body on z = 0, through-hole leads below", "extents_mm": [ 10.2,- 8,+ 8.3, 14.4 ], "zmin_mm": -3,- "centre_offset_mm": 0.1,+ "centre_offset_mm": 0.05, "footprint_binding": "identity",- "sha256": "b2c24b64fe80a401d8a0bfab20d5029eb54f9c12c384d831ea374c86782d174b",+ "sha256": "7737a772adbc3b4d952896527c9c30c00db9394a7e2fd4b98f9a26f72bf6bdde", "checked": "2026-11-05", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }@@ -271,7 +272,7 @@ "ptv09a-4225f-b104-hero.glb", "ptv09a-4225f-b104-hero.overlay.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
ptv09a-4225f-b104-hero.glb⋯ 1 unchanged line ⋯
ptv09a-4225f-b104-hero.overlay.json+33−33@@ -16,10 +16,10 @@ 0.5 ], "pads": 5,- "span_mm": 13.2,- "dash_mm": 0.33,- "gap_mm": 0.198,- "pad_stroke_mm": 0.0792+ "span_mm": 11.3,+ "dash_mm": 0.2825,+ "gap_mm": 0.1695,+ "pad_stroke_mm": 0.0678 }, "silkscreen": { "material": "Silkscreen reference lines - 30 percent opacity",@@ -34,7 +34,7 @@ "source": "added dot (AI)", "pad": "1", "center_mm": [- -3.95,+ -3.9, 0.0 ], "r_mm": 0.35@@ -51,13 +51,13 @@ "font": "DejaVu Sans Mono", "labels": 4, "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 1+ "fallback_to_pad_number": 4 } }, "align": { "ok": true, "centre_offset_mm": 0.1,- "tolerance_mm": 1.056,+ "tolerance_mm": 0.904, "orientation_flipped": false, "contacts_bbox_mm": [ -5.1,@@ -66,46 +66,46 @@ 7.7 ], "pads_bbox_mm": [- -6.6,- 6.6,- -0.9,- 8.5+ -5.65,+ 5.65,+ -0.85,+ 8.45 ], "seating_z_mm": -3.0 }, "sources": { "glb": "ptv09a-4225f-b104.glb",- "glb_sha256": "5c5b6ec08080b6991dd891af981d714148385e5eb44c35116838bf12f68b55ac",+ "glb_sha256": "c89d0f4954f79e67a7e14bced74e5487665c2e71bc2181551de23a05e254c81d", "footprint": "ptv09a-4225f-b104.kicad_mod",- "footprint_sha256": "f1ccd28ce05edb29992162ef76041d7baa66bcc92b3bf457926f225f1f722607",+ "footprint_sha256": "d6866616ee45bed21ea4d53e1d618885ca013c834ead67886f685ecea0f2e0bf", "pins": "page.json component.pins",- "pins_sha256": "1032dec8eed9c214e4364a19f1c6c8b83070534b98e532712a653617f8a32afb"+ "pins_sha256": "7c5c6cb454511f3f056155ccd29bf079cfb870baf1446d125c932a4aeb06920a" }, "generator": "adom-wiki 1.8.11 (component_hero)", "labels": [ { "pad": "1",- "text": "Terminal 1",+ "text": "1", "x": -2.5,- "y": 1.05,+ "y": 1.0, "align": "right", "vertical": true, "h": 0.6 }, { "pad": "2",- "text": "Terminal 2",+ "text": "2", "x": 0.0,- "y": 1.05,+ "y": 1.0, "align": "right", "vertical": true, "h": 0.6 }, { "pad": "3",- "text": "Terminal 3",+ "text": "3", "x": 2.5,- "y": 1.05,+ "y": 1.0, "align": "right", "vertical": true, "h": 0.6@@ -113,7 +113,7 @@ { "pad": "MP", "text": "MP",- "x": -6.75,+ "x": -5.8, "y": -7.0, "align": "right", "vertical": false,@@ -129,8 +129,8 @@ 0.0 ], "size_mm": [- 1.8,- 1.8+ 1.7,+ 1.7 ], "rot": 0.0 },@@ -142,8 +142,8 @@ 0.0 ], "size_mm": [- 1.8,- 1.8+ 1.7,+ 1.7 ], "rot": 0.0 },@@ -155,8 +155,8 @@ 0.0 ], "size_mm": [- 1.8,- 1.8+ 1.7,+ 1.7 ], "rot": 0.0 },@@ -164,12 +164,12 @@ "number": "MP", "shape": "oval", "center_mm": [- -5.3,+ -4.4, -7.0 ], "size_mm": [- 2.6,- 3.0+ 2.5,+ 2.9 ], "rot": 0.0 },@@ -177,12 +177,12 @@ "number": "MP", "shape": "oval", "center_mm": [- 5.3,+ 4.4, -7.0 ], "size_mm": [- 2.6,- 3.0+ 2.5,+ 2.9 ], "rot": 0.0 }
ptv09a-4225f-b104.glb⋯ 1 unchanged line ⋯
ptv09a-4225f-b104.kicad_mod+19−21@@ -1,27 +1,25 @@-(footprint "BOURNS_PTV09"+(footprint "Bourns_PTV09_4df4a4" (version 20240108) (generator "adom_assets") (layer "F.Cu")- (descr "Generated from the BOURNS datasheet land pattern (family R1395, spec 9fddf91c91)")+ (descr "Generated from the Bourns datasheet land pattern (family D4df4a4, spec 4df4a4706b)") (tags "adom generated") (attr through_hole)- (property "Reference" "REF**" (at 0 -11.95 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))- (property "Value" "BOURNS_PTV09" (at 0 2.15 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))))- (fp_line (start -5 -10.7) (end 5 -10.7) (stroke (width 0.1) (type solid)) (layer "F.Fab"))- (fp_line (start 5 -10.7) (end 5 0.7) (stroke (width 0.1) (type solid)) (layer "F.Fab"))- (fp_line (start 5 0.7) (end -5 0.7) (stroke (width 0.1) (type solid)) (layer "F.Fab"))- (fp_line (start -5 0.7) (end -5 -10.7) (stroke (width 0.1) (type solid)) (layer "F.Fab"))- (fp_line (start -3.8 -0.9) (end -3.8 0.9) (stroke (width 0.12) (type solid)) (layer "F.SilkS"))- (pad "1" thru_hole circle (at -2.5 0) (size 1.8 1.8) (drill 1) (layers "*.Cu" "*.Mask"))- (pad "2" thru_hole circle (at 0 0) (size 1.8 1.8) (drill 1) (layers "*.Cu" "*.Mask"))- (pad "3" thru_hole circle (at 2.5 0) (size 1.8 1.8) (drill 1) (layers "*.Cu" "*.Mask"))- (pad "MP" thru_hole oval (at -5.3 -7) (size 2.6 3) (drill 1.8) (layers "*.Cu" "*.Mask"))- (pad "MP" thru_hole oval (at 5.3 -7) (size 2.6 3) (drill 1.8) (layers "*.Cu" "*.Mask"))- (model "${ADOM_GEN_3D}/Adom_Gen.3dshapes/BOURNS_PTV09.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)))- (fp_poly- (pts (xy -6.85 -8.75) (xy -5.25 -8.75) (xy -5.25 -10.95) (xy 5.25 -10.95) (xy 5.25 -8.75) (xy 6.85 -8.75) (xy 6.85 -5.25) (xy 5.25 -5.25) (xy 5.25 0.95) (xy 3.65 0.95) (xy 3.65 1.15) (xy -3.65 1.15) (xy -3.65 0.95) (xy -5.25 0.95) (xy -5.25 -5.25) (xy -6.85 -5.25))- (stroke (width 0.05) (type solid))- (fill no)- (layer "F.CrtYd")- )+ (property "Reference" "REF**" (at 0 -9.7 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))+ (property "Value" "Bourns_PTV09_4df4a4" (at 0 2.11 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))))+ (fp_line (start -5 -8) (end 5 -8) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+ (fp_line (start 5 -8) (end 5 -2) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+ (fp_line (start 5 -2) (end -5 -2) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+ (fp_line (start -5 -2) (end -5 -8) (stroke (width 0.1) (type solid)) (layer "F.Fab"))+ (fp_line (start -5.9 -8.7) (end 5.9 -8.7) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))+ (fp_line (start 5.9 -8.7) (end 5.9 1.11) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))+ (fp_line (start 5.9 1.11) (end -5.9 1.11) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))+ (fp_line (start -5.9 1.11) (end -5.9 -8.7) (stroke (width 0.05) (type solid)) (layer "F.CrtYd"))+ (fp_line (start -3.75 -0.85) (end -3.75 0.85) (stroke (width 0.12) (type solid)) (layer "F.SilkS"))+ (pad "1" thru_hole circle (at -2.5 0) (size 1.7 1.7) (drill 1) (layers "*.Cu" "*.Mask"))+ (pad "2" thru_hole circle (at 0 0) (size 1.7 1.7) (drill 1) (layers "*.Cu" "*.Mask"))+ (pad "3" thru_hole circle (at 2.5 0) (size 1.7 1.7) (drill 1) (layers "*.Cu" "*.Mask"))+ (pad "MP" thru_hole oval (at -4.4 -7) (size 2.5 2.9) (drill oval 1.8 2.2) (layers "*.Cu" "*.Mask"))+ (pad "MP" thru_hole oval (at 4.4 -7) (size 2.5 2.9) (drill oval 1.8 2.2) (layers "*.Cu" "*.Mask"))+ (model "${ADOM_GEN_3D}/Adom_Gen.3dshapes/Bourns_PTV09_4df4a4.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0))) )
ptv09a-4225f-b104.kicad_sym+3−3@@ -9,15 +9,15 @@ ) (symbol "PTV09A-4225F-B104_1_1" (pin passive line (at -17.78 0.00 0) (length 5.08)- (name "Terminal 1" (effects (font (size 1.27 1.27))))+ (name "1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))) ) (pin passive line (at -17.78 -2.54 0) (length 5.08)- (name "Terminal 2" (effects (font (size 1.27 1.27))))+ (name "2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))) ) (pin passive line (at 17.78 0.00 180) (length 5.08)- (name "Terminal 3" (effects (font (size 1.27 1.27))))+ (name "3" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))) ) )
ptv09a-4225f-b104.lbr+35−24@@ -50,51 +50,62 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet</description> <packages>-<package name="BOURNS_PTV09">- <description>5 pads, 13.2 x 9.4 mm. Generated from the BOURNS datasheet land pattern (family R1395, spec 9fddf91c91)</description>- <pad name="1" x="-2.5000" y="-0.0000" drill="1.0000" diameter="1.8000" shape="round"/>- <pad name="2" x="0.0000" y="-0.0000" drill="1.0000" diameter="1.8000" shape="round"/>- <pad name="3" x="2.5000" y="-0.0000" drill="1.0000" diameter="1.8000" shape="round"/>- <pad name="MP" x="-5.3000" y="7.0000" drill="1.8000" diameter="2.6000" shape="long" rot="R90"/>- <pad name="MP@2" x="5.3000" y="7.0000" drill="1.8000" diameter="2.6000" shape="long" rot="R90"/>- <wire x1="-5.0000" y1="10.7000" x2="5.0000" y2="10.7000" width="0.1000" layer="51"/>- <wire x1="5.0000" y1="10.7000" x2="5.0000" y2="-0.7000" width="0.1000" layer="51"/>- <wire x1="5.0000" y1="-0.7000" x2="-5.0000" y2="-0.7000" width="0.1000" layer="51"/>- <wire x1="-5.0000" y1="-0.7000" x2="-5.0000" y2="10.7000" width="0.1000" layer="51"/>- <wire x1="-3.8000" y1="0.9000" x2="-3.8000" y2="-0.9000" width="0.1200" layer="21"/>- <text x="0" y="9.100" size="1.27" layer="25" align="bottom-center">>NAME</text>- <text x="0" y="-1.500" size="1.27" layer="27" align="top-center">>VALUE</text>+<package name="Bourns_PTV09_4df4a4">+ <description>5 pads, 11.3 x 9.3 mm. Generated from the Bourns datasheet land pattern (family D4df4a4, spec 4df4a4706b)</description>+ <pad name="1" x="-2.5000" y="-0.0000" drill="1.0000" diameter="1.7000" shape="round"/>+ <pad name="2" x="0.0000" y="-0.0000" drill="1.0000" diameter="1.7000" shape="round"/>+ <pad name="3" x="2.5000" y="-0.0000" drill="1.0000" diameter="1.7000" shape="round"/>+ <pad name="MP" x="-4.4000" y="7.0000" drill="1.5000" diameter="2.5000" shape="long" rot="R90"/>+ <pad name="MP@2" x="4.4000" y="7.0000" drill="1.5000" diameter="2.5000" shape="long" rot="R90"/>+ <wire x1="-5.0000" y1="8.0000" x2="5.0000" y2="8.0000" width="0.1000" layer="51"/>+ <wire x1="5.0000" y1="8.0000" x2="5.0000" y2="2.0000" width="0.1000" layer="51"/>+ <wire x1="5.0000" y1="2.0000" x2="-5.0000" y2="2.0000" width="0.1000" layer="51"/>+ <wire x1="-5.0000" y1="2.0000" x2="-5.0000" y2="8.0000" width="0.1000" layer="51"/>+ <wire x1="-3.7500" y1="0.8500" x2="-3.7500" y2="-0.8500" width="0.1200" layer="21"/>+ <text x="0" y="9.050" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-1.450" size="1.27" layer="27" align="top-center">>VALUE</text> </package> </packages> <symbols> <symbol name="PTV09A-4225F-B104">+ <description>BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/> <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/> <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">>NAME</text> <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>- <pin name="Terminal_1" x="-17.78" y="0" length="middle" direction="pas"/>- <pin name="Terminal_2" x="-17.78" y="-2.54" length="middle" direction="pas"/>- <pin name="Terminal_3" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>+ <pin name="1" x="-17.78" y="0" length="middle" direction="pas"/>+ <pin name="2" x="-17.78" y="-2.54" length="middle" direction="pas"/>+ <pin name="3" x="17.78" y="0" length="middle" direction="pas" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="PTV09A-4225F-B104" prefix="U">- <description></description>+ <description>BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="PTV09A-4225F-B104" x="0" y="0"/> </gates> <devices>- <device name="" package="BOURNS_PTV09">+ <device name="" package="Bourns_PTV09_4df4a4"> <connects>- <connect gate="G$1" pin="Terminal_1" pad="1"/>- <connect gate="G$1" pin="Terminal_2" pad="2"/>- <connect gate="G$1" pin="Terminal_3" pad="3"/>+ <connect gate="G$1" pin="1" pad="1"/>+ <connect gate="G$1" pin="2" pad="2"/>+ <connect gate="G$1" pin="3" pad="3"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="PTV09A-4225F-B104" constant="no"/>+ <attribute name="MANUFACTURER" value="BOURNS" constant="no"/>+ <attribute name="DATASHEET" value="https://www.bourns.com/docs/product-datasheets/PTV09.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/ptv09a-4225f-b104" constant="no"/>+ <attribute name="MOUSER_PN" value="652-PTV09A-4225FB104" constant="no"/>+ <attribute name="DIGIKEY_PN" value="PTV09A-4225F-B104-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C5848796" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
ptv09a-4225f-b104.step+53−52@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-05T23:06:47',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-05T23:16:22',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));@@ -15,7 +15,7 @@ DATA; #4 = PRODUCT_DEFINITION_SHAPE('','',#5); #5 = PRODUCT_DEFINITION('design','',#6,#9); #6 = PRODUCT_DEFINITION_FORMATION('','',#7);-#7 = PRODUCT('BOURNS_PTV09','BOURNS_PTV09','',(#8));+#7 = PRODUCT('Bourns_PTV09_4df4a4','Bourns_PTV09_4df4a4','',(#8)); #8 = PRODUCT_CONTEXT('',#2,'mechanical'); #9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); #10 = SHAPE_REPRESENTATION('',(#11,#15,#561,#891,#1221,#1551,#1881),@@ -33,18 +33,18 @@ DATA; #20 = ORIENTED_EDGE('',*,*,#21,.F.); #21 = EDGE_CURVE('',#22,#24,#26,.T.); #22 = VERTEX_POINT('',#23);-#23 = CARTESIAN_POINT('',(-5.,0.1,0.));+#23 = CARTESIAN_POINT('',(-5.,2.,0.)); #24 = VERTEX_POINT('',#25);-#25 = CARTESIAN_POINT('',(-5.,0.1,11.32));+#25 = CARTESIAN_POINT('',(-5.,2.,11.32)); #26 = SURFACE_CURVE('',#27,(#31,#43),.PCURVE_S1.); #27 = LINE('',#28,#29);-#28 = CARTESIAN_POINT('',(-5.,0.1,0.));+#28 = CARTESIAN_POINT('',(-5.,2.,0.)); #29 = VECTOR('',#30,1.); #30 = DIRECTION('',(0.,0.,1.)); #31 = PCURVE('',#32,#37); #32 = PLANE('',#33); #33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);-#34 = CARTESIAN_POINT('',(-5.,0.1,0.));+#34 = CARTESIAN_POINT('',(-5.,2.,0.)); #35 = DIRECTION('',(1.,0.,0.)); #36 = DIRECTION('',(0.,0.,1.)); #37 = DEFINITIONAL_REPRESENTATION('',(#38),#42);@@ -58,7 +58,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #43 = PCURVE('',#44,#49); #44 = PLANE('',#45); #45 = AXIS2_PLACEMENT_3D('',#46,#47,#48);-#46 = CARTESIAN_POINT('',(-5.,0.1,0.));+#46 = CARTESIAN_POINT('',(-5.,2.,0.)); #47 = DIRECTION('',(0.,1.,0.)); #48 = DIRECTION('',(0.,0.,1.)); #49 = DEFINITIONAL_REPRESENTATION('',(#50),#54);@@ -72,10 +72,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #55 = ORIENTED_EDGE('',*,*,#56,.T.); #56 = EDGE_CURVE('',#22,#57,#59,.T.); #57 = VERTEX_POINT('',#58);-#58 = CARTESIAN_POINT('',(-5.,6.9,0.));+#58 = CARTESIAN_POINT('',(-5.,8.,0.)); #59 = SURFACE_CURVE('',#60,(#64,#71),.PCURVE_S1.); #60 = LINE('',#61,#62);-#61 = CARTESIAN_POINT('',(-5.,0.1,0.));+#61 = CARTESIAN_POINT('',(-5.,2.,0.)); #62 = VECTOR('',#63,1.); #63 = DIRECTION('',(0.,1.,0.)); #64 = PCURVE('',#32,#65);@@ -90,7 +90,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #71 = PCURVE('',#72,#77); #72 = PLANE('',#73); #73 = AXIS2_PLACEMENT_3D('',#74,#75,#76);-#74 = CARTESIAN_POINT('',(-5.,0.1,0.));+#74 = CARTESIAN_POINT('',(-5.,2.,0.)); #75 = DIRECTION('',(0.,0.,1.)); #76 = DIRECTION('',(1.,0.,0.)); #77 = DEFINITIONAL_REPRESENTATION('',(#78),#82);@@ -104,16 +104,16 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #83 = ORIENTED_EDGE('',*,*,#84,.T.); #84 = EDGE_CURVE('',#57,#85,#87,.T.); #85 = VERTEX_POINT('',#86);-#86 = CARTESIAN_POINT('',(-5.,6.9,11.32));+#86 = CARTESIAN_POINT('',(-5.,8.,11.32)); #87 = SURFACE_CURVE('',#88,(#92,#99),.PCURVE_S1.); #88 = LINE('',#89,#90);-#89 = CARTESIAN_POINT('',(-5.,6.9,0.));+#89 = CARTESIAN_POINT('',(-5.,8.,0.)); #90 = VECTOR('',#91,1.); #91 = DIRECTION('',(0.,0.,1.)); #92 = PCURVE('',#32,#93); #93 = DEFINITIONAL_REPRESENTATION('',(#94),#98); #94 = LINE('',#95,#96);-#95 = CARTESIAN_POINT('',(0.,-6.8));+#95 = CARTESIAN_POINT('',(0.,-6.)); #96 = VECTOR('',#97,1.); #97 = DIRECTION('',(1.,0.)); #98 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -122,7 +122,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #99 = PCURVE('',#100,#105); #100 = PLANE('',#101); #101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);-#102 = CARTESIAN_POINT('',(-5.,6.9,0.));+#102 = CARTESIAN_POINT('',(-5.,8.,0.)); #103 = DIRECTION('',(0.,1.,0.)); #104 = DIRECTION('',(0.,0.,1.)); #105 = DEFINITIONAL_REPRESENTATION('',(#106),#110);@@ -137,7 +137,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #112 = EDGE_CURVE('',#24,#85,#113,.T.); #113 = SURFACE_CURVE('',#114,(#118,#125),.PCURVE_S1.); #114 = LINE('',#115,#116);-#115 = CARTESIAN_POINT('',(-5.,0.1,11.32));+#115 = CARTESIAN_POINT('',(-5.,2.,11.32)); #116 = VECTOR('',#117,1.); #117 = DIRECTION('',(0.,1.,0.)); #118 = PCURVE('',#32,#119);@@ -152,7 +152,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #125 = PCURVE('',#126,#131); #126 = PLANE('',#127); #127 = AXIS2_PLACEMENT_3D('',#128,#129,#130);-#128 = CARTESIAN_POINT('',(-4.96,0.1,11.36));+#128 = CARTESIAN_POINT('',(-4.96,2.,11.36)); #129 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); #130 = DIRECTION('',(0.,1.,0.)); #131 = DEFINITIONAL_REPRESENTATION('',(#132),#136);@@ -169,12 +169,12 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #140 = ORIENTED_EDGE('',*,*,#141,.F.); #141 = EDGE_CURVE('',#142,#144,#146,.T.); #142 = VERTEX_POINT('',#143);-#143 = CARTESIAN_POINT('',(5.,0.1,0.));+#143 = CARTESIAN_POINT('',(5.,2.,0.)); #144 = VERTEX_POINT('',#145);-#145 = CARTESIAN_POINT('',(5.,0.1,11.32));+#145 = CARTESIAN_POINT('',(5.,2.,11.32)); #146 = SURFACE_CURVE('',#147,(#151,#158),.PCURVE_S1.); #147 = LINE('',#148,#149);-#148 = CARTESIAN_POINT('',(5.,0.1,0.));+#148 = CARTESIAN_POINT('',(5.,2.,0.)); #149 = VECTOR('',#150,1.); #150 = DIRECTION('',(0.,0.,1.)); #151 = PCURVE('',#44,#152);@@ -189,7 +189,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #158 = PCURVE('',#159,#164); #159 = PLANE('',#160); #160 = AXIS2_PLACEMENT_3D('',#161,#162,#163);-#161 = CARTESIAN_POINT('',(5.,0.1,0.));+#161 = CARTESIAN_POINT('',(5.,2.,0.)); #162 = DIRECTION('',(1.,0.,0.)); #163 = DIRECTION('',(0.,0.,1.)); #164 = DEFINITIONAL_REPRESENTATION('',(#165),#169);@@ -204,7 +204,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #171 = EDGE_CURVE('',#22,#142,#172,.T.); #172 = SURFACE_CURVE('',#173,(#177,#184),.PCURVE_S1.); #173 = LINE('',#174,#175);-#174 = CARTESIAN_POINT('',(-5.,0.1,0.));+#174 = CARTESIAN_POINT('',(-5.,2.,0.)); #175 = VECTOR('',#176,1.); #176 = DIRECTION('',(1.,0.,0.)); #177 = PCURVE('',#44,#178);@@ -230,7 +230,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #193 = EDGE_CURVE('',#24,#144,#194,.T.); #194 = SURFACE_CURVE('',#195,(#199,#206),.PCURVE_S1.); #195 = LINE('',#196,#197);-#196 = CARTESIAN_POINT('',(-5.,0.1,11.32));+#196 = CARTESIAN_POINT('',(-5.,2.,11.32)); #197 = VECTOR('',#198,1.); #198 = DIRECTION('',(1.,0.,0.)); #199 = PCURVE('',#44,#200);@@ -245,7 +245,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #206 = PCURVE('',#207,#212); #207 = PLANE('',#208); #208 = AXIS2_PLACEMENT_3D('',#209,#210,#211);-#209 = CARTESIAN_POINT('',(-5.,0.14,11.36));+#209 = CARTESIAN_POINT('',(-5.,2.04,11.36)); #210 = DIRECTION('',(0.,0.707106781187,-0.707106781187)); #211 = DIRECTION('',(-1.,0.,0.)); #212 = DEFINITIONAL_REPRESENTATION('',(#213),#217);@@ -262,10 +262,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #221 = ORIENTED_EDGE('',*,*,#222,.F.); #222 = EDGE_CURVE('',#24,#223,#225,.T.); #223 = VERTEX_POINT('',#224);-#224 = CARTESIAN_POINT('',(-4.92,0.18,11.4));+#224 = CARTESIAN_POINT('',(-4.92,2.08,11.4)); #225 = SURFACE_CURVE('',#226,(#230,#237),.PCURVE_S1.); #226 = LINE('',#227,#228);-#227 = CARTESIAN_POINT('',(-4.973333333333,0.126666666667,+#227 = CARTESIAN_POINT('',(-4.973333333333,2.026666666667, 11.346666666667)); #228 = VECTOR('',#229,1.); #229 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919));@@ -291,16 +291,17 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #245 = ORIENTED_EDGE('',*,*,#246,.T.); #246 = EDGE_CURVE('',#85,#247,#249,.T.); #247 = VERTEX_POINT('',#248);-#248 = CARTESIAN_POINT('',(-4.92,6.82,11.4));+#248 = CARTESIAN_POINT('',(-4.92,7.92,11.4)); #249 = SURFACE_CURVE('',#250,(#254,#261),.PCURVE_S1.); #250 = LINE('',#251,#252);-#251 = CARTESIAN_POINT('',(-3.84,5.74,12.48));+#251 = CARTESIAN_POINT('',(-3.973333333333,6.973333333333,+ 12.346666666667)); #252 = VECTOR('',#253,1.); #253 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); #254 = PCURVE('',#126,#255); #255 = DEFINITIONAL_REPRESENTATION('',(#256),#260); #256 = LINE('',#257,#258);-#257 = CARTESIAN_POINT('',(5.64,1.583919189858));+#257 = CARTESIAN_POINT('',(4.973333333333,1.395357381542)); #258 = VECTOR('',#259,1.); #259 = DIRECTION('',(-0.57735026919,0.816496580928)); #260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -309,12 +310,12 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #261 = PCURVE('',#262,#267); #262 = PLANE('',#263); #263 = AXIS2_PLACEMENT_3D('',#264,#265,#266);-#264 = CARTESIAN_POINT('',(-5.,6.86,11.36));+#264 = CARTESIAN_POINT('',(-5.,7.96,11.36)); #265 = DIRECTION('',(0.,0.707106781187,0.707106781187)); #266 = DIRECTION('',(-1.,0.,0.)); #267 = DEFINITIONAL_REPRESENTATION('',(#268),#272); #268 = LINE('',#269,#270);-#269 = CARTESIAN_POINT('',(-1.16,1.583919189858));+#269 = CARTESIAN_POINT('',(-1.026666666667,1.395357381542)); #270 = VECTOR('',#271,1.); #271 = DIRECTION('',(-0.57735026919,0.816496580928)); #272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -324,7 +325,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #274 = EDGE_CURVE('',#223,#247,#275,.T.); #275 = SURFACE_CURVE('',#276,(#280,#287),.PCURVE_S1.); #276 = LINE('',#277,#278);-#277 = CARTESIAN_POINT('',(-4.92,0.1,11.4));+#277 = CARTESIAN_POINT('',(-4.92,2.,11.4)); #278 = VECTOR('',#279,1.); #279 = DIRECTION('',(0.,1.,0.)); #280 = PCURVE('',#126,#281);@@ -339,7 +340,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #287 = PCURVE('',#288,#293); #288 = PLANE('',#289); #289 = AXIS2_PLACEMENT_3D('',#290,#291,#292);-#290 = CARTESIAN_POINT('',(-5.,0.1,11.4));+#290 = CARTESIAN_POINT('',(-5.,2.,11.4)); #291 = DIRECTION('',(0.,0.,1.)); #292 = DIRECTION('',(1.,0.,0.)); #293 = DEFINITIONAL_REPRESENTATION('',(#294),#298);@@ -358,10 +359,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #304 = ORIENTED_EDGE('',*,*,#305,.T.); #305 = EDGE_CURVE('',#142,#306,#308,.T.); #306 = VERTEX_POINT('',#307);-#307 = CARTESIAN_POINT('',(5.,6.9,0.));+#307 = CARTESIAN_POINT('',(5.,8.,0.)); #308 = SURFACE_CURVE('',#309,(#313,#320),.PCURVE_S1.); #309 = LINE('',#310,#311);-#310 = CARTESIAN_POINT('',(5.,0.1,0.));+#310 = CARTESIAN_POINT('',(5.,2.,0.)); #311 = VECTOR('',#312,1.); #312 = DIRECTION('',(0.,1.,0.)); #313 = PCURVE('',#72,#314);@@ -386,13 +387,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #328 = EDGE_CURVE('',#57,#306,#329,.T.); #329 = SURFACE_CURVE('',#330,(#334,#341),.PCURVE_S1.); #330 = LINE('',#331,#332);-#331 = CARTESIAN_POINT('',(-5.,6.9,0.));+#331 = CARTESIAN_POINT('',(-5.,8.,0.)); #332 = VECTOR('',#333,1.); #333 = DIRECTION('',(1.,0.,0.)); #334 = PCURVE('',#72,#335); #335 = DEFINITIONAL_REPRESENTATION('',(#336),#340); #336 = LINE('',#337,#338);-#337 = CARTESIAN_POINT('',(0.,6.8));+#337 = CARTESIAN_POINT('',(0.,6.)); #338 = VECTOR('',#339,1.); #339 = DIRECTION('',(1.,0.)); #340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -413,10 +414,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #351 = ORIENTED_EDGE('',*,*,#352,.F.); #352 = EDGE_CURVE('',#306,#353,#355,.T.); #353 = VERTEX_POINT('',#354);-#354 = CARTESIAN_POINT('',(5.,6.9,11.32));+#354 = CARTESIAN_POINT('',(5.,8.,11.32)); #355 = SURFACE_CURVE('',#356,(#360,#367),.PCURVE_S1.); #356 = LINE('',#357,#358);-#357 = CARTESIAN_POINT('',(5.,6.9,0.));+#357 = CARTESIAN_POINT('',(5.,8.,0.)); #358 = VECTOR('',#359,1.); #359 = DIRECTION('',(0.,0.,1.)); #360 = PCURVE('',#100,#361);@@ -431,7 +432,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #367 = PCURVE('',#159,#368); #368 = DEFINITIONAL_REPRESENTATION('',(#369),#373); #369 = LINE('',#370,#371);-#370 = CARTESIAN_POINT('',(0.,-6.8));+#370 = CARTESIAN_POINT('',(0.,-6.)); #371 = VECTOR('',#372,1.); #372 = DIRECTION('',(1.,0.)); #373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -443,7 +444,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #377 = EDGE_CURVE('',#85,#353,#378,.T.); #378 = SURFACE_CURVE('',#379,(#383,#390),.PCURVE_S1.); #379 = LINE('',#380,#381);-#380 = CARTESIAN_POINT('',(-5.,6.9,11.32));+#380 = CARTESIAN_POINT('',(-5.,8.,11.32)); #381 = VECTOR('',#382,1.); #382 = DIRECTION('',(1.,0.,0.)); #383 = PCURVE('',#100,#384);@@ -474,7 +475,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #404 = EDGE_CURVE('',#144,#353,#405,.T.); #405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.); #406 = LINE('',#407,#408);-#407 = CARTESIAN_POINT('',(5.,0.1,11.32));+#407 = CARTESIAN_POINT('',(5.,2.,11.32)); #408 = VECTOR('',#409,1.); #409 = DIRECTION('',(0.,1.,0.)); #410 = PCURVE('',#159,#411);@@ -489,7 +490,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #417 = PCURVE('',#418,#423); #418 = PLANE('',#419); #419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);-#420 = CARTESIAN_POINT('',(4.96,0.1,11.36));+#420 = CARTESIAN_POINT('',(4.96,2.,11.36)); #421 = DIRECTION('',(0.707106781187,0.,0.707106781187)); #422 = DIRECTION('',(0.,1.,0.)); #423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);@@ -508,10 +509,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #434 = ORIENTED_EDGE('',*,*,#435,.T.); #435 = EDGE_CURVE('',#144,#436,#438,.T.); #436 = VERTEX_POINT('',#437);-#437 = CARTESIAN_POINT('',(4.92,0.18,11.4));+#437 = CARTESIAN_POINT('',(4.92,2.08,11.4)); #438 = SURFACE_CURVE('',#439,(#443,#450),.PCURVE_S1.); #439 = LINE('',#440,#441);-#440 = CARTESIAN_POINT('',(3.306666666667,1.793333333333,13.013333333333+#440 = CARTESIAN_POINT('',(3.306666666667,3.693333333333,13.013333333333 )); #441 = VECTOR('',#442,1.); #442 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919));@@ -537,7 +538,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #458 = EDGE_CURVE('',#223,#436,#459,.T.); #459 = SURFACE_CURVE('',#460,(#464,#471),.PCURVE_S1.); #460 = LINE('',#461,#462);-#461 = CARTESIAN_POINT('',(-5.,0.18,11.4));+#461 = CARTESIAN_POINT('',(-5.,2.08,11.4)); #462 = VECTOR('',#463,1.); #463 = DIRECTION('',(1.,0.,0.)); #464 = PCURVE('',#207,#465);@@ -566,10 +567,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #483 = ORIENTED_EDGE('',*,*,#484,.T.); #484 = EDGE_CURVE('',#436,#485,#487,.T.); #485 = VERTEX_POINT('',#486);-#486 = CARTESIAN_POINT('',(4.92,6.82,11.4));+#486 = CARTESIAN_POINT('',(4.92,7.92,11.4)); #487 = SURFACE_CURVE('',#488,(#492,#499),.PCURVE_S1.); #488 = LINE('',#489,#490);-#489 = CARTESIAN_POINT('',(4.92,0.1,11.4));+#489 = CARTESIAN_POINT('',(4.92,2.,11.4)); #490 = VECTOR('',#491,1.); #491 = DIRECTION('',(0.,1.,0.)); #492 = PCURVE('',#288,#493);@@ -594,13 +595,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #507 = EDGE_CURVE('',#247,#485,#508,.T.); #508 = SURFACE_CURVE('',#509,(#513,#520),.PCURVE_S1.); #509 = LINE('',#510,#511);-#510 = CARTESIAN_POINT('',(-5.,6.82,11.4));+#510 = CARTESIAN_POINT('',(-5.,7.92,11.4)); #511 = VECTOR('',#512,1.); #512 = DIRECTION('',(1.,0.,0.)); #513 = PCURVE('',#288,#514); #514 = DEFINITIONAL_REPRESENTATION('',(#515),#519); #515 = LINE('',#516,#517);-#516 = CARTESIAN_POINT('',(0.,6.72));+#516 = CARTESIAN_POINT('',(0.,5.92)); #517 = VECTOR('',#518,1.); #518 = DIRECTION('',(1.,0.)); #519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -624,14 +625,14 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #533 = EDGE_CURVE('',#353,#485,#534,.T.); #534 = SURFACE_CURVE('',#535,(#539,#546),.PCURVE_S1.); #535 = LINE('',#536,#537);-#536 = CARTESIAN_POINT('',(2.173333333333,4.073333333333,14.146666666667+#536 = CARTESIAN_POINT('',(2.306666666667,5.306666666667,14.013333333333 )); #537 = VECTOR('',#538,1.); #538 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); #539 = PCURVE('',#262,#540); #540 = DEFINITIONAL_REPRESENTATION('',(#541),#545); #541 = LINE('',#542,#543);-#542 = CARTESIAN_POINT('',(-7.173333333333,3.940941793813));+#542 = CARTESIAN_POINT('',(-7.306666666667,3.752379985496)); #543 = VECTOR('',#544,1.); #544 = DIRECTION('',(0.57735026919,0.816496580928)); #545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -640,7 +641,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #546 = PCURVE('',#418,#547); #547 = DEFINITIONAL_REPRESENTATION('',(#548),#552); #548 = LINE('',#549,#550);-#549 = CARTESIAN_POINT('',(3.973333333333,3.940941793813));+#549 = CARTESIAN_POINT('',(3.306666666667,3.752379985496)); #550 = VECTOR('',#551,1.); #551 = DIRECTION('',(-0.57735026919,0.816496580928)); #552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2)