component
PTV09A-2020S-A103
Public Made by Adomby adom
BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.1
11 files changed
+406−198
README.md+10−9@@ -8,9 +8,9 @@ PTV09A-2020S-A103 from BOURNS, in a THT. Pinout and pin descriptions extracted f | Pin | Name | Type | Function | |---|---|---|---|-| 1 | Terminal 1 | passive | Terminal 1 is one end of the resistive element; the datasheet references the Terminal 1-3 input voltage across the element. |-| 2 | Terminal 2 | output | Terminal 2 is the wiper output, referenced in the datasheet as the Terminal 1-2 output voltage versus rotational travel. |-| 3 | Terminal 3 | passive | Terminal 3 is the opposite end of the resistive element, referenced in the datasheet as the Terminal 1-3 input voltage. |+| 1 | 1 | passive | Terminal 1 is an end terminal of the resistive element, and the datasheet's taper plot defines output voltage as terminal 1-2 with maximum operating voltage of 20 VDC, 50 VAC. |+| 2 | 2 | passive | Terminal 2 is the wiper (output) terminal, with output voltage measured between terminals 1 and 2 across the rotational travel. |+| 3 | 3 | passive | Terminal 3 is the other end terminal of the resistive element, defining the terminal 1-3 input voltage span with maximum operating voltage of 20 VDC, 50 VAC. | ## Key specifications @@ -27,18 +27,19 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Standard resistance | R | | 10000 | | Ω | resistance code 103 | 1 |-| Standard resistance tolerance | | -20 | | 20 | % | | 1 |-| Residual resistance | | | | 500 | ohms | or ±1 % max. | 1 |+| Standard resistance tolerance | | -20 | | 20 | % | Standard Resistance Tolerance ±20 % | 1 |+| Residual resistance | | | | 500 | ohms | Printed as '500 ohms or ±1 % max.' | 1 |+| Residual resistance | | | | 1 | % | Printed as '500 ohms or ±1 % max.' (alternative limit) | 1 | | Sliding noise | | | | 100 | mV | max | 1 |-| Maximum operating voltage | | | | 20 | VDC | Linear and Audio | 1 |-| Maximum operating voltage | | | | 50 | VAC | Linear and Audio | 1 |+| Maximum operating voltage DC | | | | 20 | VDC | (Linear and Audio) | 1 |+| Maximum operating voltage AC | | | | 50 | VAC | (Linear and Audio) | 1 | | Operating temperature | | -10 | | 50 | °C | | 1 |+| Nominal resistance | R | | 10000 | | ohms | Resistance code 103 (PTV09A-2020S-A103 suffix A103), Standard Resistance Table | 1 | ## CAD (KiCad official) - Symbol: `PTV09A-2020S-A103`-- Footprint: `Adom_Gen:BOURNS_PTV09`+- Footprint: `Adom_Gen:Bourns_PTV09_e64ff8` - 3D model: THT (KiCad packages3D, STEP) ## Provenance
docs/hero.png⋯ 1 unchanged line ⋯
package.json+23−20@@ -1,6 +1,6 @@ { "slug": "ptv09a-2020s-a103",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -26,7 +26,9 @@ "docs/hero.png", "docs/ptv09a-2020s-a103-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "ptv09a-2020s-a103-hero.glb",+ "ptv09a-2020s-a103-hero.overlay.json" ], "component": { "mpn": "PTV09A-2020S-A103",@@ -39,9 +41,10 @@ "parts": { "symbol": "ptv09a-2020s-a103.kicad_sym", "footprint": "ptv09a-2020s-a103.kicad_mod",- "model_3d": "ptv09a-2020s-a103.glb",+ "model_3d": "ptv09a-2020s-a103-hero.glb", "model_3d_step": "ptv09a-2020s-a103.step",- "lbr": "ptv09a-2020s-a103.lbr"+ "lbr": "ptv09a-2020s-a103.lbr",+ "model_3d_plain": "ptv09a-2020s-a103.glb" }, "distributor_links": { "lcsc": "C7029925",@@ -49,7 +52,7 @@ "mouser": "652-PTV09A2020SA103" }, "distributor_check": {- "checked_at": "2026-11-05T23:09:49Z",+ "checked_at": "2026-11-05T23:17:58Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PTV09A-2020S-A103-ND",@@ -63,21 +66,21 @@ "pins": [ { "number": "1",- "name": "Terminal 1",+ "name": "1", "type": "passive",- "description": "Terminal 1 is one end of the resistive element; the datasheet references the Terminal 1-3 input voltage across the element."+ "description": "Terminal 1 is an end terminal of the resistive element, and the datasheet's taper plot defines output voltage as terminal 1-2 with maximum operating voltage of 20 VDC, 50 VAC." }, { "number": "2",- "name": "Terminal 2",- "type": "output",- "description": "Terminal 2 is the wiper output, referenced in the datasheet as the Terminal 1-2 output voltage versus rotational travel."+ "name": "2",+ "type": "passive",+ "description": "Terminal 2 is the wiper (output) terminal, with output voltage measured between terminals 1 and 2 across the rotational travel." }, { "number": "3",- "name": "Terminal 3",+ "name": "3", "type": "passive",- "description": "Terminal 3 is the opposite end of the resistive element, referenced in the datasheet as the Terminal 1-3 input voltage."+ "description": "Terminal 3 is the other end terminal of the resistive element, defining the terminal 1-3 input voltage span with maximum operating voltage of 20 VDC, 50 VAC." } ], "provenance": {@@ -91,12 +94,12 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The MPN PTV09A-2020S-A103 decodes to terminal configuration 2 (Vertical/Side Mount, Bushingless, 10 ",+ "extractor flagged: MPN PTV09A-2020S-A103 decodes as Model PTV09A, Terminal Configuration 2 (Vertical/Side Mount, Bushin; The datasheet text does not explicitly print a pin-type classification; all three terminals are type; Pin numbers 1, 2, 3 are taken from the PCB layout label '12 3' and the schematic numbering printed f", "footprint has thermal pad ['MP'] the extraction did not name" ], "pages_sent": 5,- "cost_usd": 0.0324,- "at": "2026-11-05T23:09:43"+ "cost_usd": 0.0569,+ "at": "2026-11-05T23:17:52" }, "datasheet": { "url": "https://www.bourns.com/docs/product-datasheets/PTV09.pdf",@@ -125,14 +128,14 @@ "origin": "footprint origin = pad-pattern centre", "seat": "body on z = 0, through-hole leads below", "extents_mm": [- 10.2,- 8.0,- 14.4+ 11.4,+ 7.0,+ 13.0 ], "zmin_mm": -3.0,- "centre_offset_mm": 1.825,+ "centre_offset_mm": 1.25, "footprint_binding": "identity",- "sha256": "b2c24b64fe80a401d8a0bfab20d5029eb54f9c12c384d831ea374c86782d174b",+ "sha256": "e77a375e778771d1657a27b894087f5d1deed6f06377467a339d1d8e6e28e0e6", "checked": "2026-11-05", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }
page.json+26−23@@ -4,7 +4,7 @@ "slug": "ptv09a-2020s-a103", "title": "PTV09A-2020S-A103", "brief": "BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -24,9 +24,10 @@ "parts": { "symbol": "ptv09a-2020s-a103.kicad_sym", "footprint": "ptv09a-2020s-a103.kicad_mod",- "model_3d": "ptv09a-2020s-a103.glb",+ "model_3d": "ptv09a-2020s-a103-hero.glb", "model_3d_step": "ptv09a-2020s-a103.step",- "lbr": "ptv09a-2020s-a103.lbr"+ "lbr": "ptv09a-2020s-a103.lbr",+ "model_3d_plain": "ptv09a-2020s-a103.glb" }, "distributor_links": { "lcsc": "C7029925",@@ -34,7 +35,7 @@ "mouser": "652-PTV09A2020SA103" }, "distributor_check": {- "checked_at": "2026-11-05T23:09:49Z",+ "checked_at": "2026-11-05T23:17:58Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "PTV09A-2020S-A103-ND",@@ -48,21 +49,21 @@ "pins": [ { "number": "1",- "name": "Terminal 1",+ "name": "1", "type": "passive",- "description": "Terminal 1 is one end of the resistive element; the datasheet references the Terminal 1-3 input voltage across the element."+ "description": "Terminal 1 is an end terminal of the resistive element, and the datasheet's taper plot defines output voltage as terminal 1-2 with maximum operating voltage of 20 VDC, 50 VAC." }, { "number": "2",- "name": "Terminal 2",- "type": "output",- "description": "Terminal 2 is the wiper output, referenced in the datasheet as the Terminal 1-2 output voltage versus rotational travel."+ "name": "2",+ "type": "passive",+ "description": "Terminal 2 is the wiper (output) terminal, with output voltage measured between terminals 1 and 2 across the rotational travel." }, { "number": "3",- "name": "Terminal 3",+ "name": "3", "type": "passive",- "description": "Terminal 3 is the opposite end of the resistive element, referenced in the datasheet as the Terminal 1-3 input voltage."+ "description": "Terminal 3 is the other end terminal of the resistive element, defining the terminal 1-3 input voltage span with maximum operating voltage of 20 VDC, 50 VAC." } ], "provenance": {@@ -76,12 +77,12 @@ "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: The MPN PTV09A-2020S-A103 decodes to terminal configuration 2 (Vertical/Side Mount, Bushingless, 10 ",+ "extractor flagged: MPN PTV09A-2020S-A103 decodes as Model PTV09A, Terminal Configuration 2 (Vertical/Side Mount, Bushin; The datasheet text does not explicitly print a pin-type classification; all three terminals are type; Pin numbers 1, 2, 3 are taken from the PCB layout label '12 3' and the schematic numbering printed f", "footprint has thermal pad ['MP'] the extraction did not name" ], "pages_sent": 5,- "cost_usd": 0.0324,- "at": "2026-11-05T23:09:43"+ "cost_usd": 0.0569,+ "at": "2026-11-05T23:17:52" }, "datasheet": { "url": "https://www.bourns.com/docs/product-datasheets/PTV09.pdf",@@ -110,14 +111,14 @@ "origin": "footprint origin = pad-pattern centre", "seat": "body on z = 0, through-hole leads below", "extents_mm": [- 10.2,- 8,- 14.4+ 11.4,+ 7,+ 13 ], "zmin_mm": -3,- "centre_offset_mm": 1.825,+ "centre_offset_mm": 1.25, "footprint_binding": "identity",- "sha256": "b2c24b64fe80a401d8a0bfab20d5029eb54f9c12c384d831ea374c86782d174b",+ "sha256": "e77a375e778771d1657a27b894087f5d1deed6f06377467a339d1d8e6e28e0e6", "checked": "2026-11-05", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" }@@ -254,9 +255,11 @@ "docs/hero.png", "docs/ptv09a-2020s-a103-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"+ "viewers/footprint.html",+ "ptv09a-2020s-a103-hero.glb",+ "ptv09a-2020s-a103-hero.overlay.json" ],- "visibility": {- "public": true- }+ "visibility": "public",+ "description": "BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }
ptv09a-2020s-a103-hero.glbadded⋯ 1 unchanged line ⋯
ptv09a-2020s-a103-hero.overlay.jsonadded+190@@ -0,0 +1,190 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "PTV09A-2020S-A103",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 5,+ "span_mm": 12.5,+ "dash_mm": 0.3125,+ "gap_mm": 0.1875,+ "pad_stroke_mm": 0.075+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 1,+ "pin1": {+ "source": "added dot (AI)",+ "pad": "1",+ "center_mm": [+ -3.9,+ 0.0+ ],+ "r_mm": 0.35+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 4,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 4+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.1,+ "tolerance_mm": 1.0,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -5.7,+ 5.7,+ -0.3,+ 4.0+ ],+ "pads_bbox_mm": [+ -6.25,+ 6.25,+ -0.85,+ 4.75+ ],+ "seating_z_mm": -3.0+ },+ "sources": {+ "glb": "ptv09a-2020s-a103.glb",+ "glb_sha256": "a4e4225bc951ff35ee2769d7723ac76a552b147076383004ef4e3d7ce78884bc",+ "footprint": "ptv09a-2020s-a103.kicad_mod",+ "footprint_sha256": "44de030d5042167ec2e967f3c1db318928c53be958e5b0ca6a87c83508d10144",+ "pins": "page.json component.pins",+ "pins_sha256": "7c5c6cb454511f3f056155ccd29bf079cfb870baf1446d125c932a4aeb06920a"+ },+ "generator": "adom-wiki 1.8.11 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "1",+ "x": -2.5,+ "y": 1.0,+ "align": "right",+ "vertical": true,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "2",+ "x": 0.0,+ "y": 1.0,+ "align": "right",+ "vertical": true,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "3",+ "x": 2.5,+ "y": 1.0,+ "align": "right",+ "vertical": true,+ "h": 0.6+ },+ {+ "pad": "MP",+ "text": "MP",+ "x": -6.4,+ "y": -3.3,+ "align": "right",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "circle",+ "center_mm": [+ -2.5,+ 0.0+ ],+ "size_mm": [+ 1.7,+ 1.7+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "circle",+ "center_mm": [+ 0.0,+ 0.0+ ],+ "size_mm": [+ 1.7,+ 1.7+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "circle",+ "center_mm": [+ 2.5,+ 0.0+ ],+ "size_mm": [+ 1.7,+ 1.7+ ],+ "rot": 0.0+ },+ {+ "number": "MP",+ "shape": "oval",+ "center_mm": [+ -5.0,+ -3.3+ ],+ "size_mm": [+ 2.5,+ 2.9+ ],+ "rot": 0.0+ },+ {+ "number": "MP",+ "shape": "oval",+ "center_mm": [+ 5.0,+ -3.3+ ],+ "size_mm": [+ 2.5,+ 2.9+ ],+ "rot": 0.0+ }+ ]+}
ptv09a-2020s-a103.glb⋯ 1 unchanged line ⋯
ptv09a-2020s-a103.kicad_mod+11−11@@ -1,25 +1,25 @@-(footprint "BOURNS_PTV09"+(footprint "Bourns_PTV09_e64ff8" (version 20240108) (generator "adom_assets") (layer "F.Cu")- (descr "Generated from the BOURNS datasheet land pattern (family R1413, spec f77a66d877)")+ (descr "Generated from the Bourns datasheet land pattern (family De64ff8, spec e64ff8b697)") (tags "adom generated") (attr through_hole) (property "Reference" "REF**" (at 0 -7.95 0) (layer "F.SilkS") (effects (font (size 1 1) (thickness 0.15))))- (property "Value" "BOURNS_PTV09" (at 0 2.05 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15))))+ (property "Value" "Bourns_PTV09_e64ff8" (at 0 2.11 0) (layer "F.Fab") (effects (font (size 1 1) (thickness 0.15)))) (fp_line (start -4.85 -6.7) (end 4.85 -6.7) (stroke (width 0.1) (type solid)) (layer "F.Fab")) (fp_line (start 4.85 -6.7) (end 4.85 0.1) (stroke (width 0.1) (type solid)) (layer "F.Fab")) (fp_line (start 4.85 0.1) (end -4.85 0.1) (stroke (width 0.1) (type solid)) (layer "F.Fab")) (fp_line (start -4.85 0.1) (end -4.85 -6.7) (stroke (width 0.1) (type solid)) (layer "F.Fab"))- (fp_line (start -3.7 -0.8) (end -3.7 0.8) (stroke (width 0.12) (type solid)) (layer "F.SilkS"))- (pad "1" thru_hole circle (at -2.5 0) (size 1.6 1.6) (drill 1) (layers "*.Cu" "*.Mask"))- (pad "2" thru_hole circle (at 0 0) (size 1.6 1.6) (drill 1) (layers "*.Cu" "*.Mask"))- (pad "3" thru_hole circle (at 2.5 0) (size 1.6 1.6) (drill 1) (layers "*.Cu" "*.Mask"))- (pad "MP" thru_hole oval (at -4.1 -3.3) (size 2.5 2.5) (drill 1.8) (layers "*.Cu" "*.Mask"))- (pad "MP" thru_hole oval (at 4.1 -3.3) (size 2.5 2.5) (drill 1.8) (layers "*.Cu" "*.Mask"))- (model "${ADOM_GEN_3D}/Adom_Gen.3dshapes/BOURNS_PTV09.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0)))+ (fp_line (start -3.75 -0.85) (end -3.75 0.85) (stroke (width 0.12) (type solid)) (layer "F.SilkS"))+ (pad "1" thru_hole circle (at -2.5 0) (size 1.7 1.7) (drill 1) (layers "*.Cu" "*.Mask"))+ (pad "2" thru_hole circle (at 0 0) (size 1.7 1.7) (drill 1) (layers "*.Cu" "*.Mask"))+ (pad "3" thru_hole circle (at 2.5 0) (size 1.7 1.7) (drill 1) (layers "*.Cu" "*.Mask"))+ (pad "MP" thru_hole oval (at -5 -3.3) (size 2.5 2.9) (drill oval 1.8 2.2) (layers "*.Cu" "*.Mask"))+ (pad "MP" thru_hole oval (at 5 -3.3) (size 2.5 2.9) (drill oval 1.8 2.2) (layers "*.Cu" "*.Mask"))+ (model "${ADOM_GEN_3D}/Adom_Gen.3dshapes/Bourns_PTV09_e64ff8.step" (offset (xyz 0 0 0)) (scale (xyz 1 1 1)) (rotate (xyz 0 0 0))) (fp_poly- (pts (xy -5.60 -4.80) (xy -5.10 -4.80) (xy -5.10 -6.95) (xy 5.10 -6.95) (xy 5.10 -4.80) (xy 5.60 -4.80) (xy 5.60 -1.80) (xy 5.10 -1.80) (xy 5.10 0.35) (xy 3.55 0.35) (xy 3.55 1.05) (xy -3.55 1.05) (xy -3.55 0.35) (xy -5.10 0.35) (xy -5.10 -1.80) (xy -5.60 -1.80))+ (pts (xy -6.50 -5.00) (xy -5.10 -5.00) (xy -5.10 -6.95) (xy 5.10 -6.95) (xy 5.10 -5.00) (xy 6.50 -5.00) (xy 6.50 -1.60) (xy 5.10 -1.60) (xy 5.10 0.35) (xy 3.60 0.35) (xy 3.60 1.10) (xy -3.60 1.10) (xy -3.60 0.35) (xy -5.10 0.35) (xy -5.10 -1.60) (xy -6.50 -1.60)) (stroke (width 0.05) (type solid)) (fill no) (layer "F.CrtYd")
ptv09a-2020s-a103.kicad_sym+4−4@@ -9,15 +9,15 @@ ) (symbol "PTV09A-2020S-A103_1_1" (pin passive line (at -17.78 0.00 0) (length 5.08)- (name "Terminal 1" (effects (font (size 1.27 1.27))))+ (name "1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))) )- (pin output line (at -17.78 -2.54 0) (length 5.08)- (name "Terminal 2" (effects (font (size 1.27 1.27))))+ (pin passive line (at -17.78 -2.54 0) (length 5.08)+ (name "2" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))) ) (pin passive line (at 17.78 0.00 180) (length 5.08)- (name "Terminal 3" (effects (font (size 1.27 1.27))))+ (name "3" (effects (font (size 1.27 1.27)))) (number "3" (effects (font (size 1.27 1.27)))) ) )
ptv09a-2020s-a103.lbr+31−20@@ -50,51 +50,62 @@ <layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/> </layers> <library>-<description></description>+<description>BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet</description> <packages>-<package name="BOURNS_PTV09">- <description>5 pads, 10.7 x 5.3 mm. Generated from the BOURNS datasheet land pattern (family R1413, spec f77a66d877)</description>- <pad name="1" x="-2.5000" y="-0.0000" drill="1.0000" diameter="1.6000" shape="round"/>- <pad name="2" x="0.0000" y="-0.0000" drill="1.0000" diameter="1.6000" shape="round"/>- <pad name="3" x="2.5000" y="-0.0000" drill="1.0000" diameter="1.6000" shape="round"/>- <pad name="MP" x="-4.1000" y="3.3000" drill="1.8000" diameter="2.5000" shape="long"/>- <pad name="MP@2" x="4.1000" y="3.3000" drill="1.8000" diameter="2.5000" shape="long"/>+<package name="Bourns_PTV09_e64ff8">+ <description>5 pads, 12.5 x 5.6 mm. Generated from the Bourns datasheet land pattern (family De64ff8, spec e64ff8b697)</description>+ <pad name="1" x="-2.5000" y="-0.0000" drill="1.0000" diameter="1.7000" shape="round"/>+ <pad name="2" x="0.0000" y="-0.0000" drill="1.0000" diameter="1.7000" shape="round"/>+ <pad name="3" x="2.5000" y="-0.0000" drill="1.0000" diameter="1.7000" shape="round"/>+ <pad name="MP" x="-5.0000" y="3.3000" drill="1.5000" diameter="2.5000" shape="long" rot="R90"/>+ <pad name="MP@2" x="5.0000" y="3.3000" drill="1.5000" diameter="2.5000" shape="long" rot="R90"/> <wire x1="-4.8500" y1="6.7000" x2="4.8500" y2="6.7000" width="0.1000" layer="51"/> <wire x1="4.8500" y1="6.7000" x2="4.8500" y2="-0.1000" width="0.1000" layer="51"/> <wire x1="4.8500" y1="-0.1000" x2="-4.8500" y2="-0.1000" width="0.1000" layer="51"/> <wire x1="-4.8500" y1="-0.1000" x2="-4.8500" y2="6.7000" width="0.1000" layer="51"/>- <wire x1="-3.7000" y1="0.8000" x2="-3.7000" y2="-0.8000" width="0.1200" layer="21"/>- <text x="0" y="5.150" size="1.27" layer="25" align="bottom-center">>NAME</text>- <text x="0" y="-1.400" size="1.27" layer="27" align="top-center">>VALUE</text>+ <wire x1="-3.7500" y1="0.8500" x2="-3.7500" y2="-0.8500" width="0.1200" layer="21"/>+ <text x="0" y="5.350" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-1.450" size="1.27" layer="27" align="top-center">>VALUE</text> </package> </packages> <symbols> <symbol name="PTV09A-2020S-A103">+ <description>BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet</description> <wire x1="-12.7" y1="2.54" x2="12.7" y2="2.54" width="0.254" layer="94"/> <wire x1="12.7" y1="2.54" x2="12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/> <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="2.54" width="0.254" layer="94"/> <text x="0.0000" y="5.0800" size="1.27" layer="95" align="center">>NAME</text> <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>- <pin name="Terminal_1" x="-17.78" y="0" length="middle" direction="pas"/>- <pin name="Terminal_2" x="-17.78" y="-2.54" length="middle" direction="out"/>- <pin name="Terminal_3" x="17.78" y="0" length="middle" direction="pas" rot="R180"/>+ <pin name="1" x="-17.78" y="0" length="middle" direction="pas"/>+ <pin name="2" x="-17.78" y="-2.54" length="middle" direction="pas"/>+ <pin name="3" x="17.78" y="0" length="middle" direction="pas" rot="R180"/> </symbol> </symbols> <devicesets> <deviceset name="PTV09A-2020S-A103" prefix="U">- <description></description>+ <description>BOURNS Potentiometers, Variable Resistors, THT. Pinout cross-checked by two models against the datasheet</description> <gates> <gate name="G$1" symbol="PTV09A-2020S-A103" x="0" y="0"/> </gates> <devices>- <device name="" package="BOURNS_PTV09">+ <device name="" package="Bourns_PTV09_e64ff8"> <connects>- <connect gate="G$1" pin="Terminal_1" pad="1"/>- <connect gate="G$1" pin="Terminal_2" pad="2"/>- <connect gate="G$1" pin="Terminal_3" pad="3"/>+ <connect gate="G$1" pin="1" pad="1"/>+ <connect gate="G$1" pin="2" pad="2"/>+ <connect gate="G$1" pin="3" pad="3"/> </connects>- <technologies><technology name=""/></technologies>+ <technologies>+ <technology name="">+ <attribute name="MPN" value="PTV09A-2020S-A103" constant="no"/>+ <attribute name="MANUFACTURER" value="BOURNS" constant="no"/>+ <attribute name="DATASHEET" value="https://www.bourns.com/docs/product-datasheets/PTV09.pdf" constant="no"/>+ <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/ptv09a-2020s-a103" constant="no"/>+ <attribute name="MOUSER_PN" value="652-PTV09A2020SA103" constant="no"/>+ <attribute name="DIGIKEY_PN" value="PTV09A-2020S-A103-ND" constant="no"/>+ <attribute name="LCSC_PN" value="C7029925" constant="no"/>+ </technology>+ </technologies> </device> </devices> </deviceset>
ptv09a-2020s-a103.step+111−111@@ -1,7 +1,7 @@ ISO-10303-21; HEADER; FILE_DESCRIPTION(('Open CASCADE Model'),'2;1');-FILE_NAME('Open CASCADE Shape Model','2026-11-05T23:06:47',('Author'),(+FILE_NAME('Open CASCADE Shape Model','2026-11-05T23:16:28',('Author'),( 'Open CASCADE'),'Open CASCADE STEP processor 7.9','Open CASCADE 7.9' ,'Unknown'); FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));@@ -15,7 +15,7 @@ DATA; #4 = PRODUCT_DEFINITION_SHAPE('','',#5); #5 = PRODUCT_DEFINITION('design','',#6,#9); #6 = PRODUCT_DEFINITION_FORMATION('','',#7);-#7 = PRODUCT('BOURNS_PTV09','BOURNS_PTV09','',(#8));+#7 = PRODUCT('Bourns_PTV09_e64ff8','Bourns_PTV09_e64ff8','',(#8)); #8 = PRODUCT_CONTEXT('',#2,'mechanical'); #9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); #10 = SHAPE_REPRESENTATION('',(#11,#15,#561,#891,#1221,#1551,#1881),@@ -33,18 +33,18 @@ DATA; #20 = ORIENTED_EDGE('',*,*,#21,.F.); #21 = EDGE_CURVE('',#22,#24,#26,.T.); #22 = VERTEX_POINT('',#23);-#23 = CARTESIAN_POINT('',(-5.,0.1,0.));+#23 = CARTESIAN_POINT('',(-4.85,-0.1,0.)); #24 = VERTEX_POINT('',#25);-#25 = CARTESIAN_POINT('',(-5.,0.1,11.32));+#25 = CARTESIAN_POINT('',(-4.85,-0.1,9.92)); #26 = SURFACE_CURVE('',#27,(#31,#43),.PCURVE_S1.); #27 = LINE('',#28,#29);-#28 = CARTESIAN_POINT('',(-5.,0.1,0.));+#28 = CARTESIAN_POINT('',(-4.85,-0.1,0.)); #29 = VECTOR('',#30,1.); #30 = DIRECTION('',(0.,0.,1.)); #31 = PCURVE('',#32,#37); #32 = PLANE('',#33); #33 = AXIS2_PLACEMENT_3D('',#34,#35,#36);-#34 = CARTESIAN_POINT('',(-5.,0.1,0.));+#34 = CARTESIAN_POINT('',(-4.85,-0.1,0.)); #35 = DIRECTION('',(1.,0.,0.)); #36 = DIRECTION('',(0.,0.,1.)); #37 = DEFINITIONAL_REPRESENTATION('',(#38),#42);@@ -58,7 +58,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #43 = PCURVE('',#44,#49); #44 = PLANE('',#45); #45 = AXIS2_PLACEMENT_3D('',#46,#47,#48);-#46 = CARTESIAN_POINT('',(-5.,0.1,0.));+#46 = CARTESIAN_POINT('',(-4.85,-0.1,0.)); #47 = DIRECTION('',(0.,1.,0.)); #48 = DIRECTION('',(0.,0.,1.)); #49 = DEFINITIONAL_REPRESENTATION('',(#50),#54);@@ -72,10 +72,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #55 = ORIENTED_EDGE('',*,*,#56,.T.); #56 = EDGE_CURVE('',#22,#57,#59,.T.); #57 = VERTEX_POINT('',#58);-#58 = CARTESIAN_POINT('',(-5.,6.9,0.));+#58 = CARTESIAN_POINT('',(-4.85,6.7,0.)); #59 = SURFACE_CURVE('',#60,(#64,#71),.PCURVE_S1.); #60 = LINE('',#61,#62);-#61 = CARTESIAN_POINT('',(-5.,0.1,0.));+#61 = CARTESIAN_POINT('',(-4.85,-0.1,0.)); #62 = VECTOR('',#63,1.); #63 = DIRECTION('',(0.,1.,0.)); #64 = PCURVE('',#32,#65);@@ -90,7 +90,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #71 = PCURVE('',#72,#77); #72 = PLANE('',#73); #73 = AXIS2_PLACEMENT_3D('',#74,#75,#76);-#74 = CARTESIAN_POINT('',(-5.,0.1,0.));+#74 = CARTESIAN_POINT('',(-4.85,-0.1,0.)); #75 = DIRECTION('',(0.,0.,1.)); #76 = DIRECTION('',(1.,0.,0.)); #77 = DEFINITIONAL_REPRESENTATION('',(#78),#82);@@ -104,10 +104,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #83 = ORIENTED_EDGE('',*,*,#84,.T.); #84 = EDGE_CURVE('',#57,#85,#87,.T.); #85 = VERTEX_POINT('',#86);-#86 = CARTESIAN_POINT('',(-5.,6.9,11.32));+#86 = CARTESIAN_POINT('',(-4.85,6.7,9.92)); #87 = SURFACE_CURVE('',#88,(#92,#99),.PCURVE_S1.); #88 = LINE('',#89,#90);-#89 = CARTESIAN_POINT('',(-5.,6.9,0.));+#89 = CARTESIAN_POINT('',(-4.85,6.7,0.)); #90 = VECTOR('',#91,1.); #91 = DIRECTION('',(0.,0.,1.)); #92 = PCURVE('',#32,#93);@@ -122,7 +122,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #99 = PCURVE('',#100,#105); #100 = PLANE('',#101); #101 = AXIS2_PLACEMENT_3D('',#102,#103,#104);-#102 = CARTESIAN_POINT('',(-5.,6.9,0.));+#102 = CARTESIAN_POINT('',(-4.85,6.7,0.)); #103 = DIRECTION('',(0.,1.,0.)); #104 = DIRECTION('',(0.,0.,1.)); #105 = DEFINITIONAL_REPRESENTATION('',(#106),#110);@@ -137,13 +137,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #112 = EDGE_CURVE('',#24,#85,#113,.T.); #113 = SURFACE_CURVE('',#114,(#118,#125),.PCURVE_S1.); #114 = LINE('',#115,#116);-#115 = CARTESIAN_POINT('',(-5.,0.1,11.32));+#115 = CARTESIAN_POINT('',(-4.85,-0.1,9.92)); #116 = VECTOR('',#117,1.); #117 = DIRECTION('',(0.,1.,0.)); #118 = PCURVE('',#32,#119); #119 = DEFINITIONAL_REPRESENTATION('',(#120),#124); #120 = LINE('',#121,#122);-#121 = CARTESIAN_POINT('',(11.32,0.));+#121 = CARTESIAN_POINT('',(9.92,0.)); #122 = VECTOR('',#123,1.); #123 = DIRECTION('',(0.,-1.)); #124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -152,7 +152,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #125 = PCURVE('',#126,#131); #126 = PLANE('',#127); #127 = AXIS2_PLACEMENT_3D('',#128,#129,#130);-#128 = CARTESIAN_POINT('',(-4.96,0.1,11.36));+#128 = CARTESIAN_POINT('',(-4.81,-0.1,9.96)); #129 = DIRECTION('',(0.707106781187,0.,-0.707106781187)); #130 = DIRECTION('',(0.,1.,0.)); #131 = DEFINITIONAL_REPRESENTATION('',(#132),#136);@@ -169,18 +169,18 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #140 = ORIENTED_EDGE('',*,*,#141,.F.); #141 = EDGE_CURVE('',#142,#144,#146,.T.); #142 = VERTEX_POINT('',#143);-#143 = CARTESIAN_POINT('',(5.,0.1,0.));+#143 = CARTESIAN_POINT('',(4.85,-0.1,0.)); #144 = VERTEX_POINT('',#145);-#145 = CARTESIAN_POINT('',(5.,0.1,11.32));+#145 = CARTESIAN_POINT('',(4.85,-0.1,9.92)); #146 = SURFACE_CURVE('',#147,(#151,#158),.PCURVE_S1.); #147 = LINE('',#148,#149);-#148 = CARTESIAN_POINT('',(5.,0.1,0.));+#148 = CARTESIAN_POINT('',(4.85,-0.1,0.)); #149 = VECTOR('',#150,1.); #150 = DIRECTION('',(0.,0.,1.)); #151 = PCURVE('',#44,#152); #152 = DEFINITIONAL_REPRESENTATION('',(#153),#157); #153 = LINE('',#154,#155);-#154 = CARTESIAN_POINT('',(0.,10.));+#154 = CARTESIAN_POINT('',(0.,9.7)); #155 = VECTOR('',#156,1.); #156 = DIRECTION('',(1.,0.)); #157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -189,7 +189,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #158 = PCURVE('',#159,#164); #159 = PLANE('',#160); #160 = AXIS2_PLACEMENT_3D('',#161,#162,#163);-#161 = CARTESIAN_POINT('',(5.,0.1,0.));+#161 = CARTESIAN_POINT('',(4.85,-0.1,0.)); #162 = DIRECTION('',(1.,0.,0.)); #163 = DIRECTION('',(0.,0.,1.)); #164 = DEFINITIONAL_REPRESENTATION('',(#165),#169);@@ -204,7 +204,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #171 = EDGE_CURVE('',#22,#142,#172,.T.); #172 = SURFACE_CURVE('',#173,(#177,#184),.PCURVE_S1.); #173 = LINE('',#174,#175);-#174 = CARTESIAN_POINT('',(-5.,0.1,0.));+#174 = CARTESIAN_POINT('',(-4.85,-0.1,0.)); #175 = VECTOR('',#176,1.); #176 = DIRECTION('',(1.,0.,0.)); #177 = PCURVE('',#44,#178);@@ -230,13 +230,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #193 = EDGE_CURVE('',#24,#144,#194,.T.); #194 = SURFACE_CURVE('',#195,(#199,#206),.PCURVE_S1.); #195 = LINE('',#196,#197);-#196 = CARTESIAN_POINT('',(-5.,0.1,11.32));+#196 = CARTESIAN_POINT('',(-4.85,-0.1,9.92)); #197 = VECTOR('',#198,1.); #198 = DIRECTION('',(1.,0.,0.)); #199 = PCURVE('',#44,#200); #200 = DEFINITIONAL_REPRESENTATION('',(#201),#205); #201 = LINE('',#202,#203);-#202 = CARTESIAN_POINT('',(11.32,0.));+#202 = CARTESIAN_POINT('',(9.92,0.)); #203 = VECTOR('',#204,1.); #204 = DIRECTION('',(0.,1.)); #205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -245,7 +245,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #206 = PCURVE('',#207,#212); #207 = PLANE('',#208); #208 = AXIS2_PLACEMENT_3D('',#209,#210,#211);-#209 = CARTESIAN_POINT('',(-5.,0.14,11.36));+#209 = CARTESIAN_POINT('',(-4.85,-6.E-02,9.96)); #210 = DIRECTION('',(0.,0.707106781187,-0.707106781187)); #211 = DIRECTION('',(-1.,0.,0.)); #212 = DEFINITIONAL_REPRESENTATION('',(#213),#217);@@ -262,17 +262,17 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #221 = ORIENTED_EDGE('',*,*,#222,.F.); #222 = EDGE_CURVE('',#24,#223,#225,.T.); #223 = VERTEX_POINT('',#224);-#224 = CARTESIAN_POINT('',(-4.92,0.18,11.4));+#224 = CARTESIAN_POINT('',(-4.77,-2.E-02,10.)); #225 = SURFACE_CURVE('',#226,(#230,#237),.PCURVE_S1.); #226 = LINE('',#227,#228);-#227 = CARTESIAN_POINT('',(-4.973333333333,0.126666666667,- 11.346666666667));+#227 = CARTESIAN_POINT('',(-4.823333333333,-7.333333333333E-02,+ 9.946666666667)); #228 = VECTOR('',#229,1.); #229 = DIRECTION('',(0.57735026919,0.57735026919,0.57735026919)); #230 = PCURVE('',#126,#231); #231 = DEFINITIONAL_REPRESENTATION('',(#232),#236); #232 = LINE('',#233,#234);-#233 = CARTESIAN_POINT('',(2.6666666667E-02,-1.885618083117E-02));+#233 = CARTESIAN_POINT('',(2.666666666667E-02,-1.885618083117E-02)); #234 = VECTOR('',#235,1.); #235 = DIRECTION('',(0.57735026919,0.816496580928)); #236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -281,7 +281,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #237 = PCURVE('',#207,#238); #238 = DEFINITIONAL_REPRESENTATION('',(#239),#243); #239 = LINE('',#240,#241);-#240 = CARTESIAN_POINT('',(-2.6666666667E-02,-1.885618083117E-02));+#240 = CARTESIAN_POINT('',(-2.6666666667E-02,-1.88561808314E-02)); #241 = VECTOR('',#242,1.); #242 = DIRECTION('',(-0.57735026919,0.816496580928)); #243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -291,10 +291,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #245 = ORIENTED_EDGE('',*,*,#246,.T.); #246 = EDGE_CURVE('',#85,#247,#249,.T.); #247 = VERTEX_POINT('',#248);-#248 = CARTESIAN_POINT('',(-4.92,6.82,11.4));+#248 = CARTESIAN_POINT('',(-4.77,6.62,10.)); #249 = SURFACE_CURVE('',#250,(#254,#261),.PCURVE_S1.); #250 = LINE('',#251,#252);-#251 = CARTESIAN_POINT('',(-3.84,5.74,12.48));+#251 = CARTESIAN_POINT('',(-3.69,5.54,11.08)); #252 = VECTOR('',#253,1.); #253 = DIRECTION('',(0.57735026919,-0.57735026919,0.57735026919)); #254 = PCURVE('',#126,#255);@@ -309,7 +309,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #261 = PCURVE('',#262,#267); #262 = PLANE('',#263); #263 = AXIS2_PLACEMENT_3D('',#264,#265,#266);-#264 = CARTESIAN_POINT('',(-5.,6.86,11.36));+#264 = CARTESIAN_POINT('',(-4.85,6.66,9.96)); #265 = DIRECTION('',(0.,0.707106781187,0.707106781187)); #266 = DIRECTION('',(-1.,0.,0.)); #267 = DEFINITIONAL_REPRESENTATION('',(#268),#272);@@ -324,7 +324,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #274 = EDGE_CURVE('',#223,#247,#275,.T.); #275 = SURFACE_CURVE('',#276,(#280,#287),.PCURVE_S1.); #276 = LINE('',#277,#278);-#277 = CARTESIAN_POINT('',(-4.92,0.1,11.4));+#277 = CARTESIAN_POINT('',(-4.77,-0.1,10.)); #278 = VECTOR('',#279,1.); #279 = DIRECTION('',(0.,1.,0.)); #280 = PCURVE('',#126,#281);@@ -339,7 +339,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #287 = PCURVE('',#288,#293); #288 = PLANE('',#289); #289 = AXIS2_PLACEMENT_3D('',#290,#291,#292);-#290 = CARTESIAN_POINT('',(-5.,0.1,11.4));+#290 = CARTESIAN_POINT('',(-4.85,-0.1,10.)); #291 = DIRECTION('',(0.,0.,1.)); #292 = DIRECTION('',(1.,0.,0.)); #293 = DEFINITIONAL_REPRESENTATION('',(#294),#298);@@ -358,16 +358,16 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #304 = ORIENTED_EDGE('',*,*,#305,.T.); #305 = EDGE_CURVE('',#142,#306,#308,.T.); #306 = VERTEX_POINT('',#307);-#307 = CARTESIAN_POINT('',(5.,6.9,0.));+#307 = CARTESIAN_POINT('',(4.85,6.7,0.)); #308 = SURFACE_CURVE('',#309,(#313,#320),.PCURVE_S1.); #309 = LINE('',#310,#311);-#310 = CARTESIAN_POINT('',(5.,0.1,0.));+#310 = CARTESIAN_POINT('',(4.85,-0.1,0.)); #311 = VECTOR('',#312,1.); #312 = DIRECTION('',(0.,1.,0.)); #313 = PCURVE('',#72,#314); #314 = DEFINITIONAL_REPRESENTATION('',(#315),#319); #315 = LINE('',#316,#317);-#316 = CARTESIAN_POINT('',(10.,0.));+#316 = CARTESIAN_POINT('',(9.7,0.)); #317 = VECTOR('',#318,1.); #318 = DIRECTION('',(0.,1.)); #319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -386,7 +386,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #328 = EDGE_CURVE('',#57,#306,#329,.T.); #329 = SURFACE_CURVE('',#330,(#334,#341),.PCURVE_S1.); #330 = LINE('',#331,#332);-#331 = CARTESIAN_POINT('',(-5.,6.9,0.));+#331 = CARTESIAN_POINT('',(-4.85,6.7,0.)); #332 = VECTOR('',#333,1.); #333 = DIRECTION('',(1.,0.,0.)); #334 = PCURVE('',#72,#335);@@ -413,16 +413,16 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #351 = ORIENTED_EDGE('',*,*,#352,.F.); #352 = EDGE_CURVE('',#306,#353,#355,.T.); #353 = VERTEX_POINT('',#354);-#354 = CARTESIAN_POINT('',(5.,6.9,11.32));+#354 = CARTESIAN_POINT('',(4.85,6.7,9.92)); #355 = SURFACE_CURVE('',#356,(#360,#367),.PCURVE_S1.); #356 = LINE('',#357,#358);-#357 = CARTESIAN_POINT('',(5.,6.9,0.));+#357 = CARTESIAN_POINT('',(4.85,6.7,0.)); #358 = VECTOR('',#359,1.); #359 = DIRECTION('',(0.,0.,1.)); #360 = PCURVE('',#100,#361); #361 = DEFINITIONAL_REPRESENTATION('',(#362),#366); #362 = LINE('',#363,#364);-#363 = CARTESIAN_POINT('',(0.,10.));+#363 = CARTESIAN_POINT('',(0.,9.7)); #364 = VECTOR('',#365,1.); #365 = DIRECTION('',(1.,0.)); #366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -443,13 +443,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #377 = EDGE_CURVE('',#85,#353,#378,.T.); #378 = SURFACE_CURVE('',#379,(#383,#390),.PCURVE_S1.); #379 = LINE('',#380,#381);-#380 = CARTESIAN_POINT('',(-5.,6.9,11.32));+#380 = CARTESIAN_POINT('',(-4.85,6.7,9.92)); #381 = VECTOR('',#382,1.); #382 = DIRECTION('',(1.,0.,0.)); #383 = PCURVE('',#100,#384); #384 = DEFINITIONAL_REPRESENTATION('',(#385),#389); #385 = LINE('',#386,#387);-#386 = CARTESIAN_POINT('',(11.32,0.));+#386 = CARTESIAN_POINT('',(9.92,0.)); #387 = VECTOR('',#388,1.); #388 = DIRECTION('',(0.,1.)); #389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -474,13 +474,13 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #404 = EDGE_CURVE('',#144,#353,#405,.T.); #405 = SURFACE_CURVE('',#406,(#410,#417),.PCURVE_S1.); #406 = LINE('',#407,#408);-#407 = CARTESIAN_POINT('',(5.,0.1,11.32));+#407 = CARTESIAN_POINT('',(4.85,-0.1,9.92)); #408 = VECTOR('',#409,1.); #409 = DIRECTION('',(0.,1.,0.)); #410 = PCURVE('',#159,#411); #411 = DEFINITIONAL_REPRESENTATION('',(#412),#416); #412 = LINE('',#413,#414);-#413 = CARTESIAN_POINT('',(11.32,0.));+#413 = CARTESIAN_POINT('',(9.92,0.)); #414 = VECTOR('',#415,1.); #415 = DIRECTION('',(0.,-1.)); #416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -489,7 +489,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #417 = PCURVE('',#418,#423); #418 = PLANE('',#419); #419 = AXIS2_PLACEMENT_3D('',#420,#421,#422);-#420 = CARTESIAN_POINT('',(4.96,0.1,11.36));+#420 = CARTESIAN_POINT('',(4.81,-0.1,9.96)); #421 = DIRECTION('',(0.707106781187,0.,0.707106781187)); #422 = DIRECTION('',(0.,1.,0.)); #423 = DEFINITIONAL_REPRESENTATION('',(#424),#428);@@ -508,17 +508,17 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #434 = ORIENTED_EDGE('',*,*,#435,.T.); #435 = EDGE_CURVE('',#144,#436,#438,.T.); #436 = VERTEX_POINT('',#437);-#437 = CARTESIAN_POINT('',(4.92,0.18,11.4));+#437 = CARTESIAN_POINT('',(4.77,-2.E-02,10.)); #438 = SURFACE_CURVE('',#439,(#443,#450),.PCURVE_S1.); #439 = LINE('',#440,#441);-#440 = CARTESIAN_POINT('',(3.306666666667,1.793333333333,13.013333333333+#440 = CARTESIAN_POINT('',(3.206666666667,1.543333333333,11.563333333333 )); #441 = VECTOR('',#442,1.); #442 = DIRECTION('',(-0.57735026919,0.57735026919,0.57735026919)); #443 = PCURVE('',#207,#444); #444 = DEFINITIONAL_REPRESENTATION('',(#445),#449); #445 = LINE('',#446,#447);-#446 = CARTESIAN_POINT('',(-8.306666666667,2.338166423123));+#446 = CARTESIAN_POINT('',(-8.056666666667,2.267455745004)); #447 = VECTOR('',#448,1.); #448 = DIRECTION('',(0.57735026919,0.816496580928)); #449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -527,7 +527,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #450 = PCURVE('',#418,#451); #451 = DEFINITIONAL_REPRESENTATION('',(#452),#456); #452 = LINE('',#453,#454);-#453 = CARTESIAN_POINT('',(1.693333333333,2.338166423123));+#453 = CARTESIAN_POINT('',(1.643333333333,2.267455745004)); #454 = VECTOR('',#455,1.); #455 = DIRECTION('',(0.57735026919,0.816496580928)); #456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -537,7 +537,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #458 = EDGE_CURVE('',#223,#436,#459,.T.); #459 = SURFACE_CURVE('',#460,(#464,#471),.PCURVE_S1.); #460 = LINE('',#461,#462);-#461 = CARTESIAN_POINT('',(-5.,0.18,11.4));+#461 = CARTESIAN_POINT('',(-4.85,-2.E-02,10.)); #462 = VECTOR('',#463,1.); #463 = DIRECTION('',(1.,0.,0.)); #464 = PCURVE('',#207,#465);@@ -566,16 +566,16 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #483 = ORIENTED_EDGE('',*,*,#484,.T.); #484 = EDGE_CURVE('',#436,#485,#487,.T.); #485 = VERTEX_POINT('',#486);-#486 = CARTESIAN_POINT('',(4.92,6.82,11.4));+#486 = CARTESIAN_POINT('',(4.77,6.62,10.)); #487 = SURFACE_CURVE('',#488,(#492,#499),.PCURVE_S1.); #488 = LINE('',#489,#490);-#489 = CARTESIAN_POINT('',(4.92,0.1,11.4));+#489 = CARTESIAN_POINT('',(4.77,-0.1,10.)); #490 = VECTOR('',#491,1.); #491 = DIRECTION('',(0.,1.,0.)); #492 = PCURVE('',#288,#493); #493 = DEFINITIONAL_REPRESENTATION('',(#494),#498); #494 = LINE('',#495,#496);-#495 = CARTESIAN_POINT('',(9.92,0.));+#495 = CARTESIAN_POINT('',(9.62,0.)); #496 = VECTOR('',#497,1.); #497 = DIRECTION('',(0.,1.)); #498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -594,7 +594,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #507 = EDGE_CURVE('',#247,#485,#508,.T.); #508 = SURFACE_CURVE('',#509,(#513,#520),.PCURVE_S1.); #509 = LINE('',#510,#511);-#510 = CARTESIAN_POINT('',(-5.,6.82,11.4));+#510 = CARTESIAN_POINT('',(-4.85,6.62,10.)); #511 = VECTOR('',#512,1.); #512 = DIRECTION('',(1.,0.,0.)); #513 = PCURVE('',#288,#514);@@ -624,14 +624,14 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #533 = EDGE_CURVE('',#353,#485,#534,.T.); #534 = SURFACE_CURVE('',#535,(#539,#546),.PCURVE_S1.); #535 = LINE('',#536,#537);-#536 = CARTESIAN_POINT('',(2.173333333333,4.073333333333,14.146666666667+#536 = CARTESIAN_POINT('',(2.073333333333,3.923333333333,12.696666666667 )); #537 = VECTOR('',#538,1.); #538 = DIRECTION('',(-0.57735026919,-0.57735026919,0.57735026919)); #539 = PCURVE('',#262,#540); #540 = DEFINITIONAL_REPRESENTATION('',(#541),#545); #541 = LINE('',#542,#543);-#542 = CARTESIAN_POINT('',(-7.173333333333,3.940941793813));+#542 = CARTESIAN_POINT('',(-6.923333333333,3.870231115695)); #543 = VECTOR('',#544,1.); #544 = DIRECTION('',(0.57735026919,0.816496580928)); #545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -640,7 +640,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #546 = PCURVE('',#418,#547); #547 = DEFINITIONAL_REPRESENTATION('',(#548),#552); #548 = LINE('',#549,#550);-#549 = CARTESIAN_POINT('',(3.973333333333,3.940941793813));+#549 = CARTESIAN_POINT('',(4.023333333333,3.870231115695)); #550 = VECTOR('',#551,1.); #551 = DIRECTION('',(-0.57735026919,0.816496580928)); #552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) @@ -1796,18 +1796,18 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1556 = ORIENTED_EDGE('',*,*,#1557,.F.); #1557 = EDGE_CURVE('',#1558,#1560,#1562,.T.); #1558 = VERTEX_POINT('',#1559);-#1559 = CARTESIAN_POINT('',(-5.1,6.3,-3.));+#1559 = CARTESIAN_POINT('',(-5.7,2.6,-3.)); #1560 = VERTEX_POINT('',#1561);-#1561 = CARTESIAN_POINT('',(-5.1,6.3,0.5));+#1561 = CARTESIAN_POINT('',(-5.7,2.6,0.5)); #1562 = SURFACE_CURVE('',#1563,(#1567,#1579),.PCURVE_S1.); #1563 = LINE('',#1564,#1565);-#1564 = CARTESIAN_POINT('',(-5.1,6.3,-3.));+#1564 = CARTESIAN_POINT('',(-5.7,2.6,-3.)); #1565 = VECTOR('',#1566,1.); #1566 = DIRECTION('',(0.,0.,1.)); #1567 = PCURVE('',#1568,#1573); #1568 = PLANE('',#1569); #1569 = AXIS2_PLACEMENT_3D('',#1570,#1571,#1572);-#1570 = CARTESIAN_POINT('',(-5.1,6.3,-3.));+#1570 = CARTESIAN_POINT('',(-5.7,2.6,-3.)); #1571 = DIRECTION('',(1.,0.,0.)); #1572 = DIRECTION('',(0.,0.,1.)); #1573 = DEFINITIONAL_REPRESENTATION('',(#1574),#1578);@@ -1821,7 +1821,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1579 = PCURVE('',#1580,#1585); #1580 = PLANE('',#1581); #1581 = AXIS2_PLACEMENT_3D('',#1582,#1583,#1584);-#1582 = CARTESIAN_POINT('',(-5.1,6.3,-3.));+#1582 = CARTESIAN_POINT('',(-5.7,2.6,-3.)); #1583 = DIRECTION('',(0.,1.,0.)); #1584 = DIRECTION('',(0.,0.,1.)); #1585 = DEFINITIONAL_REPRESENTATION('',(#1586),#1590);@@ -1835,10 +1835,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1591 = ORIENTED_EDGE('',*,*,#1592,.T.); #1592 = EDGE_CURVE('',#1558,#1593,#1595,.T.); #1593 = VERTEX_POINT('',#1594);-#1594 = CARTESIAN_POINT('',(-5.1,7.7,-3.));+#1594 = CARTESIAN_POINT('',(-5.7,4.,-3.)); #1595 = SURFACE_CURVE('',#1596,(#1600,#1607),.PCURVE_S1.); #1596 = LINE('',#1597,#1598);-#1597 = CARTESIAN_POINT('',(-5.1,6.3,-3.));+#1597 = CARTESIAN_POINT('',(-5.7,2.6,-3.)); #1598 = VECTOR('',#1599,1.); #1599 = DIRECTION('',(0.,1.,0.)); #1600 = PCURVE('',#1568,#1601);@@ -1853,7 +1853,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1607 = PCURVE('',#1608,#1613); #1608 = PLANE('',#1609); #1609 = AXIS2_PLACEMENT_3D('',#1610,#1611,#1612);-#1610 = CARTESIAN_POINT('',(-5.1,6.3,-3.));+#1610 = CARTESIAN_POINT('',(-5.7,2.6,-3.)); #1611 = DIRECTION('',(0.,0.,1.)); #1612 = DIRECTION('',(1.,0.,0.)); #1613 = DEFINITIONAL_REPRESENTATION('',(#1614),#1618);@@ -1867,10 +1867,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1619 = ORIENTED_EDGE('',*,*,#1620,.T.); #1620 = EDGE_CURVE('',#1593,#1621,#1623,.T.); #1621 = VERTEX_POINT('',#1622);-#1622 = CARTESIAN_POINT('',(-5.1,7.7,0.5));+#1622 = CARTESIAN_POINT('',(-5.7,4.,0.5)); #1623 = SURFACE_CURVE('',#1624,(#1628,#1635),.PCURVE_S1.); #1624 = LINE('',#1625,#1626);-#1625 = CARTESIAN_POINT('',(-5.1,7.7,-3.));+#1625 = CARTESIAN_POINT('',(-5.7,4.,-3.)); #1626 = VECTOR('',#1627,1.); #1627 = DIRECTION('',(0.,0.,1.)); #1628 = PCURVE('',#1568,#1629);@@ -1885,7 +1885,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1635 = PCURVE('',#1636,#1641); #1636 = PLANE('',#1637); #1637 = AXIS2_PLACEMENT_3D('',#1638,#1639,#1640);-#1638 = CARTESIAN_POINT('',(-5.1,7.7,-3.));+#1638 = CARTESIAN_POINT('',(-5.7,4.,-3.)); #1639 = DIRECTION('',(0.,1.,0.)); #1640 = DIRECTION('',(0.,0.,1.)); #1641 = DEFINITIONAL_REPRESENTATION('',(#1642),#1646);@@ -1900,7 +1900,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1648 = EDGE_CURVE('',#1560,#1621,#1649,.T.); #1649 = SURFACE_CURVE('',#1650,(#1654,#1661),.PCURVE_S1.); #1650 = LINE('',#1651,#1652);-#1651 = CARTESIAN_POINT('',(-5.1,6.3,0.5));+#1651 = CARTESIAN_POINT('',(-5.7,2.6,0.5)); #1652 = VECTOR('',#1653,1.); #1653 = DIRECTION('',(0.,1.,0.)); #1654 = PCURVE('',#1568,#1655);@@ -1915,7 +1915,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1661 = PCURVE('',#1662,#1667); #1662 = PLANE('',#1663); #1663 = AXIS2_PLACEMENT_3D('',#1664,#1665,#1666);-#1664 = CARTESIAN_POINT('',(-5.1,6.3,0.5));+#1664 = CARTESIAN_POINT('',(-5.7,2.6,0.5)); #1665 = DIRECTION('',(0.,0.,1.)); #1666 = DIRECTION('',(1.,0.,0.)); #1667 = DEFINITIONAL_REPRESENTATION('',(#1668),#1672);@@ -1932,18 +1932,18 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1676 = ORIENTED_EDGE('',*,*,#1677,.F.); #1677 = EDGE_CURVE('',#1678,#1680,#1682,.T.); #1678 = VERTEX_POINT('',#1679);-#1679 = CARTESIAN_POINT('',(-3.7,6.3,-3.));+#1679 = CARTESIAN_POINT('',(-4.3,2.6,-3.)); #1680 = VERTEX_POINT('',#1681);-#1681 = CARTESIAN_POINT('',(-3.7,6.3,0.5));+#1681 = CARTESIAN_POINT('',(-4.3,2.6,0.5)); #1682 = SURFACE_CURVE('',#1683,(#1687,#1699),.PCURVE_S1.); #1683 = LINE('',#1684,#1685);-#1684 = CARTESIAN_POINT('',(-3.7,6.3,-3.));+#1684 = CARTESIAN_POINT('',(-4.3,2.6,-3.)); #1685 = VECTOR('',#1686,1.); #1686 = DIRECTION('',(0.,0.,1.)); #1687 = PCURVE('',#1688,#1693); #1688 = PLANE('',#1689); #1689 = AXIS2_PLACEMENT_3D('',#1690,#1691,#1692);-#1690 = CARTESIAN_POINT('',(-3.7,6.3,-3.));+#1690 = CARTESIAN_POINT('',(-4.3,2.6,-3.)); #1691 = DIRECTION('',(1.,0.,0.)); #1692 = DIRECTION('',(0.,0.,1.)); #1693 = DEFINITIONAL_REPRESENTATION('',(#1694),#1698);@@ -1966,10 +1966,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1706 = ORIENTED_EDGE('',*,*,#1707,.T.); #1707 = EDGE_CURVE('',#1678,#1708,#1710,.T.); #1708 = VERTEX_POINT('',#1709);-#1709 = CARTESIAN_POINT('',(-3.7,7.7,-3.));+#1709 = CARTESIAN_POINT('',(-4.3,4.,-3.)); #1710 = SURFACE_CURVE('',#1711,(#1715,#1722),.PCURVE_S1.); #1711 = LINE('',#1712,#1713);-#1712 = CARTESIAN_POINT('',(-3.7,6.3,-3.));+#1712 = CARTESIAN_POINT('',(-4.3,2.6,-3.)); #1713 = VECTOR('',#1714,1.); #1714 = DIRECTION('',(0.,1.,0.)); #1715 = PCURVE('',#1688,#1716);@@ -1993,10 +1993,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1729 = ORIENTED_EDGE('',*,*,#1730,.T.); #1730 = EDGE_CURVE('',#1708,#1731,#1733,.T.); #1731 = VERTEX_POINT('',#1732);-#1732 = CARTESIAN_POINT('',(-3.7,7.7,0.5));+#1732 = CARTESIAN_POINT('',(-4.3,4.,0.5)); #1733 = SURFACE_CURVE('',#1734,(#1738,#1745),.PCURVE_S1.); #1734 = LINE('',#1735,#1736);-#1735 = CARTESIAN_POINT('',(-3.7,7.7,-3.));+#1735 = CARTESIAN_POINT('',(-4.3,4.,-3.)); #1736 = VECTOR('',#1737,1.); #1737 = DIRECTION('',(0.,0.,1.)); #1738 = PCURVE('',#1688,#1739);@@ -2021,7 +2021,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1753 = EDGE_CURVE('',#1680,#1731,#1754,.T.); #1754 = SURFACE_CURVE('',#1755,(#1759,#1766),.PCURVE_S1.); #1755 = LINE('',#1756,#1757);-#1756 = CARTESIAN_POINT('',(-3.7,6.3,0.5));+#1756 = CARTESIAN_POINT('',(-4.3,2.6,0.5)); #1757 = VECTOR('',#1758,1.); #1758 = DIRECTION('',(0.,1.,0.)); #1759 = PCURVE('',#1688,#1760);@@ -2049,7 +2049,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1777 = EDGE_CURVE('',#1558,#1678,#1778,.T.); #1778 = SURFACE_CURVE('',#1779,(#1783,#1790),.PCURVE_S1.); #1779 = LINE('',#1780,#1781);-#1780 = CARTESIAN_POINT('',(-5.1,6.3,-3.));+#1780 = CARTESIAN_POINT('',(-5.7,2.6,-3.)); #1781 = VECTOR('',#1782,1.); #1782 = DIRECTION('',(1.,0.,0.)); #1783 = PCURVE('',#1580,#1784);@@ -2075,7 +2075,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1799 = EDGE_CURVE('',#1560,#1680,#1800,.T.); #1800 = SURFACE_CURVE('',#1801,(#1805,#1812),.PCURVE_S1.); #1801 = LINE('',#1802,#1803);-#1802 = CARTESIAN_POINT('',(-5.1,6.3,0.5));+#1802 = CARTESIAN_POINT('',(-5.7,2.6,0.5)); #1803 = VECTOR('',#1804,1.); #1804 = DIRECTION('',(1.,0.,0.)); #1805 = PCURVE('',#1580,#1806);@@ -2104,7 +2104,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1824 = EDGE_CURVE('',#1593,#1708,#1825,.T.); #1825 = SURFACE_CURVE('',#1826,(#1830,#1837),.PCURVE_S1.); #1826 = LINE('',#1827,#1828);-#1827 = CARTESIAN_POINT('',(-5.1,7.7,-3.));+#1827 = CARTESIAN_POINT('',(-5.7,4.,-3.)); #1828 = VECTOR('',#1829,1.); #1829 = DIRECTION('',(1.,0.,0.)); #1830 = PCURVE('',#1636,#1831);@@ -2130,7 +2130,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1846 = EDGE_CURVE('',#1621,#1731,#1847,.T.); #1847 = SURFACE_CURVE('',#1848,(#1852,#1859),.PCURVE_S1.); #1848 = LINE('',#1849,#1850);-#1849 = CARTESIAN_POINT('',(-5.1,7.7,0.5));+#1849 = CARTESIAN_POINT('',(-5.7,4.,0.5)); #1850 = VECTOR('',#1851,1.); #1851 = DIRECTION('',(1.,0.,0.)); #1852 = PCURVE('',#1636,#1853);@@ -2174,18 +2174,18 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1886 = ORIENTED_EDGE('',*,*,#1887,.F.); #1887 = EDGE_CURVE('',#1888,#1890,#1892,.T.); #1888 = VERTEX_POINT('',#1889);-#1889 = CARTESIAN_POINT('',(3.7,6.3,-3.));+#1889 = CARTESIAN_POINT('',(4.3,2.6,-3.)); #1890 = VERTEX_POINT('',#1891);-#1891 = CARTESIAN_POINT('',(3.7,6.3,0.5));+#1891 = CARTESIAN_POINT('',(4.3,2.6,0.5)); #1892 = SURFACE_CURVE('',#1893,(#1897,#1909),.PCURVE_S1.); #1893 = LINE('',#1894,#1895);-#1894 = CARTESIAN_POINT('',(3.7,6.3,-3.));+#1894 = CARTESIAN_POINT('',(4.3,2.6,-3.)); #1895 = VECTOR('',#1896,1.); #1896 = DIRECTION('',(0.,0.,1.)); #1897 = PCURVE('',#1898,#1903); #1898 = PLANE('',#1899); #1899 = AXIS2_PLACEMENT_3D('',#1900,#1901,#1902);-#1900 = CARTESIAN_POINT('',(3.7,6.3,-3.));+#1900 = CARTESIAN_POINT('',(4.3,2.6,-3.)); #1901 = DIRECTION('',(1.,0.,0.)); #1902 = DIRECTION('',(0.,0.,1.)); #1903 = DEFINITIONAL_REPRESENTATION('',(#1904),#1908);@@ -2199,7 +2199,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1909 = PCURVE('',#1910,#1915); #1910 = PLANE('',#1911); #1911 = AXIS2_PLACEMENT_3D('',#1912,#1913,#1914);-#1912 = CARTESIAN_POINT('',(3.7,6.3,-3.));+#1912 = CARTESIAN_POINT('',(4.3,2.6,-3.)); #1913 = DIRECTION('',(0.,1.,0.)); #1914 = DIRECTION('',(0.,0.,1.)); #1915 = DEFINITIONAL_REPRESENTATION('',(#1916),#1920);@@ -2213,10 +2213,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1921 = ORIENTED_EDGE('',*,*,#1922,.T.); #1922 = EDGE_CURVE('',#1888,#1923,#1925,.T.); #1923 = VERTEX_POINT('',#1924);-#1924 = CARTESIAN_POINT('',(3.7,7.7,-3.));+#1924 = CARTESIAN_POINT('',(4.3,4.,-3.)); #1925 = SURFACE_CURVE('',#1926,(#1930,#1937),.PCURVE_S1.); #1926 = LINE('',#1927,#1928);-#1927 = CARTESIAN_POINT('',(3.7,6.3,-3.));+#1927 = CARTESIAN_POINT('',(4.3,2.6,-3.)); #1928 = VECTOR('',#1929,1.); #1929 = DIRECTION('',(0.,1.,0.)); #1930 = PCURVE('',#1898,#1931);@@ -2231,7 +2231,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1937 = PCURVE('',#1938,#1943); #1938 = PLANE('',#1939); #1939 = AXIS2_PLACEMENT_3D('',#1940,#1941,#1942);-#1940 = CARTESIAN_POINT('',(3.7,6.3,-3.));+#1940 = CARTESIAN_POINT('',(4.3,2.6,-3.)); #1941 = DIRECTION('',(0.,0.,1.)); #1942 = DIRECTION('',(1.,0.,0.)); #1943 = DEFINITIONAL_REPRESENTATION('',(#1944),#1948);@@ -2245,10 +2245,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1949 = ORIENTED_EDGE('',*,*,#1950,.T.); #1950 = EDGE_CURVE('',#1923,#1951,#1953,.T.); #1951 = VERTEX_POINT('',#1952);-#1952 = CARTESIAN_POINT('',(3.7,7.7,0.5));+#1952 = CARTESIAN_POINT('',(4.3,4.,0.5)); #1953 = SURFACE_CURVE('',#1954,(#1958,#1965),.PCURVE_S1.); #1954 = LINE('',#1955,#1956);-#1955 = CARTESIAN_POINT('',(3.7,7.7,-3.));+#1955 = CARTESIAN_POINT('',(4.3,4.,-3.)); #1956 = VECTOR('',#1957,1.); #1957 = DIRECTION('',(0.,0.,1.)); #1958 = PCURVE('',#1898,#1959);@@ -2263,7 +2263,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1965 = PCURVE('',#1966,#1971); #1966 = PLANE('',#1967); #1967 = AXIS2_PLACEMENT_3D('',#1968,#1969,#1970);-#1968 = CARTESIAN_POINT('',(3.7,7.7,-3.));+#1968 = CARTESIAN_POINT('',(4.3,4.,-3.)); #1969 = DIRECTION('',(0.,1.,0.)); #1970 = DIRECTION('',(0.,0.,1.)); #1971 = DEFINITIONAL_REPRESENTATION('',(#1972),#1976);@@ -2278,7 +2278,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1978 = EDGE_CURVE('',#1890,#1951,#1979,.T.); #1979 = SURFACE_CURVE('',#1980,(#1984,#1991),.PCURVE_S1.); #1980 = LINE('',#1981,#1982);-#1981 = CARTESIAN_POINT('',(3.7,6.3,0.5));+#1981 = CARTESIAN_POINT('',(4.3,2.6,0.5)); #1982 = VECTOR('',#1983,1.); #1983 = DIRECTION('',(0.,1.,0.)); #1984 = PCURVE('',#1898,#1985);@@ -2293,7 +2293,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #1991 = PCURVE('',#1992,#1997); #1992 = PLANE('',#1993); #1993 = AXIS2_PLACEMENT_3D('',#1994,#1995,#1996);-#1994 = CARTESIAN_POINT('',(3.7,6.3,0.5));+#1994 = CARTESIAN_POINT('',(4.3,2.6,0.5)); #1995 = DIRECTION('',(0.,0.,1.)); #1996 = DIRECTION('',(1.,0.,0.)); #1997 = DEFINITIONAL_REPRESENTATION('',(#1998),#2002);@@ -2310,18 +2310,18 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #2006 = ORIENTED_EDGE('',*,*,#2007,.F.); #2007 = EDGE_CURVE('',#2008,#2010,#2012,.T.); #2008 = VERTEX_POINT('',#2009);-#2009 = CARTESIAN_POINT('',(5.1,6.3,-3.));+#2009 = CARTESIAN_POINT('',(5.7,2.6,-3.)); #2010 = VERTEX_POINT('',#2011);-#2011 = CARTESIAN_POINT('',(5.1,6.3,0.5));+#2011 = CARTESIAN_POINT('',(5.7,2.6,0.5)); #2012 = SURFACE_CURVE('',#2013,(#2017,#2029),.PCURVE_S1.); #2013 = LINE('',#2014,#2015);-#2014 = CARTESIAN_POINT('',(5.1,6.3,-3.));+#2014 = CARTESIAN_POINT('',(5.7,2.6,-3.)); #2015 = VECTOR('',#2016,1.); #2016 = DIRECTION('',(0.,0.,1.)); #2017 = PCURVE('',#2018,#2023); #2018 = PLANE('',#2019); #2019 = AXIS2_PLACEMENT_3D('',#2020,#2021,#2022);-#2020 = CARTESIAN_POINT('',(5.1,6.3,-3.));+#2020 = CARTESIAN_POINT('',(5.7,2.6,-3.)); #2021 = DIRECTION('',(1.,0.,0.)); #2022 = DIRECTION('',(0.,0.,1.)); #2023 = DEFINITIONAL_REPRESENTATION('',(#2024),#2028);@@ -2344,10 +2344,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #2036 = ORIENTED_EDGE('',*,*,#2037,.T.); #2037 = EDGE_CURVE('',#2008,#2038,#2040,.T.); #2038 = VERTEX_POINT('',#2039);-#2039 = CARTESIAN_POINT('',(5.1,7.7,-3.));+#2039 = CARTESIAN_POINT('',(5.7,4.,-3.)); #2040 = SURFACE_CURVE('',#2041,(#2045,#2052),.PCURVE_S1.); #2041 = LINE('',#2042,#2043);-#2042 = CARTESIAN_POINT('',(5.1,6.3,-3.));+#2042 = CARTESIAN_POINT('',(5.7,2.6,-3.)); #2043 = VECTOR('',#2044,1.); #2044 = DIRECTION('',(0.,1.,0.)); #2045 = PCURVE('',#2018,#2046);@@ -2371,10 +2371,10 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #2059 = ORIENTED_EDGE('',*,*,#2060,.T.); #2060 = EDGE_CURVE('',#2038,#2061,#2063,.T.); #2061 = VERTEX_POINT('',#2062);-#2062 = CARTESIAN_POINT('',(5.1,7.7,0.5));+#2062 = CARTESIAN_POINT('',(5.7,4.,0.5)); #2063 = SURFACE_CURVE('',#2064,(#2068,#2075),.PCURVE_S1.); #2064 = LINE('',#2065,#2066);-#2065 = CARTESIAN_POINT('',(5.1,7.7,-3.));+#2065 = CARTESIAN_POINT('',(5.7,4.,-3.)); #2066 = VECTOR('',#2067,1.); #2067 = DIRECTION('',(0.,0.,1.)); #2068 = PCURVE('',#2018,#2069);@@ -2399,7 +2399,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #2083 = EDGE_CURVE('',#2010,#2061,#2084,.T.); #2084 = SURFACE_CURVE('',#2085,(#2089,#2096),.PCURVE_S1.); #2085 = LINE('',#2086,#2087);-#2086 = CARTESIAN_POINT('',(5.1,6.3,0.5));+#2086 = CARTESIAN_POINT('',(5.7,2.6,0.5)); #2087 = VECTOR('',#2088,1.); #2088 = DIRECTION('',(0.,1.,0.)); #2089 = PCURVE('',#2018,#2090);@@ -2427,7 +2427,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #2107 = EDGE_CURVE('',#1888,#2008,#2108,.T.); #2108 = SURFACE_CURVE('',#2109,(#2113,#2120),.PCURVE_S1.); #2109 = LINE('',#2110,#2111);-#2110 = CARTESIAN_POINT('',(3.7,6.3,-3.));+#2110 = CARTESIAN_POINT('',(4.3,2.6,-3.)); #2111 = VECTOR('',#2112,1.); #2112 = DIRECTION('',(1.,0.,0.)); #2113 = PCURVE('',#1910,#2114);@@ -2453,7 +2453,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #2129 = EDGE_CURVE('',#1890,#2010,#2130,.T.); #2130 = SURFACE_CURVE('',#2131,(#2135,#2142),.PCURVE_S1.); #2131 = LINE('',#2132,#2133);-#2132 = CARTESIAN_POINT('',(3.7,6.3,0.5));+#2132 = CARTESIAN_POINT('',(4.3,2.6,0.5)); #2133 = VECTOR('',#2134,1.); #2134 = DIRECTION('',(1.,0.,0.)); #2135 = PCURVE('',#1910,#2136);@@ -2482,7 +2482,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #2154 = EDGE_CURVE('',#1923,#2038,#2155,.T.); #2155 = SURFACE_CURVE('',#2156,(#2160,#2167),.PCURVE_S1.); #2156 = LINE('',#2157,#2158);-#2157 = CARTESIAN_POINT('',(3.7,7.7,-3.));+#2157 = CARTESIAN_POINT('',(4.3,4.,-3.)); #2158 = VECTOR('',#2159,1.); #2159 = DIRECTION('',(1.,0.,0.)); #2160 = PCURVE('',#1966,#2161);@@ -2508,7 +2508,7 @@ PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' #2176 = EDGE_CURVE('',#1951,#2061,#2177,.T.); #2177 = SURFACE_CURVE('',#2178,(#2182,#2189),.PCURVE_S1.); #2178 = LINE('',#2179,#2180);-#2179 = CARTESIAN_POINT('',(3.7,7.7,0.5));+#2179 = CARTESIAN_POINT('',(4.3,4.,0.5)); #2180 = VECTOR('',#2181,1.); #2181 = DIRECTION('',(1.,0.,0.)); #2182 = PCURVE('',#1966,#2183);