← Commit history

pt438: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·d6444aadcd · ·parent 63149c3
1 file changed +62−1
page.json+62−1
@@ -33,5 +33,66 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "PT438",+    "manufacturer": "PUOLOP",+    "package": "SOT-23-6L",+    "pin_count": 6,+    "category": "Battery Management",+    "parts": {+      "symbol": "pt438.kicad_sym",+      "footprint": "pt438.kicad_mod",+      "model_3d": "pt438-etched.glb",+      "model_3d_plain": "pt438.glb",+      "model_3d_step": "pt438-etched.step",+      "model_3d_step_plain": "pt438.step",+      "lbr": "pt438.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "OD",+        "type": "output",+        "description": "Discharge control MOSFET gate driver. Drives the gate of the discharge-control N-MOSFET; high (~VCC) enables discharge, low (~GND) disables it during over-discharge/over-current/short-circuit protection. VODH = VCC-0.02V typ, VODL = 0.1V typ."+      },+      {+        "number": "2",+        "name": "CS",+        "type": "input",+        "description": "Current-sense and charger-detect input. Monitors the voltage between BATT- and GND (across the two series MOSFETs) to detect discharge over-current (VOI1=176mV typ), load short-circuit (VOI2=1.00V typ), and charger connection (VCH). Absolute max VCC-14V to VCC+0.3V."+      },+      {+        "number": "3",+        "name": "OC",+        "type": "output",+        "description": "Charge control MOSFET gate driver. Drives the gate of the charge-control N-MOSFET; high (~VCC) enables charging, low (~GND) disables charging during over-charge protection. VOCH = VCC-0.02V typ, VOCL = 0.1V typ."+      },+      {+        "number": "4",+        "name": "TD",+        "type": "input",+        "description": "Test pin used to shorten the over-charge detection delay time so factory test cycles are reduced. Normally left unconnected in application (see typical application circuit)."+      },+      {+        "number": "5",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive supply, connected to the battery positive terminal through a series resistor R1 (typ 100 Ω) with a 0.1 µF decoupling capacitor C1 to GND for charger ripple/disturbance suppression. Operating VCC range 2V to 5V (typ 3.6V); absolute max GND-0.3V to GND+10V."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference, connected to the battery negative terminal via the decoupling capacitor node. All internal detection voltages are referenced to this pin."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}