← Commit history
package.json+133−4@@ -1,6 +1,6 @@ { "slug": "pt438",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "PUOLOP Battery Management, SOT-23-6L. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -24,6 +24,135 @@ "docs/hero.png", "docs/pt438-datasheet.pdf", "viewers/symbol.html",- "viewers/footprint.html"- ]-}+ "viewers/footprint.html",+ "pt438-etched.step",+ "pt438-etched.glb"+ ],+ "component": {+ "mpn": "PT438",+ "manufacturer": "PUOLOP",+ "package": "SOT-23-6L",+ "pin_count": 6,+ "category": "Battery Management",+ "parts": {+ "symbol": "pt438.kicad_sym",+ "footprint": "pt438.kicad_mod",+ "model_3d": "pt438-etched.glb",+ "model_3d_plain": "pt438.glb",+ "model_3d_step": "pt438-etched.step",+ "model_3d_step_plain": "pt438.step",+ "lbr": "pt438.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "OD",+ "type": "output",+ "description": "Discharge control MOSFET gate driver. Drives the gate of the discharge-control N-MOSFET; high (~VCC) enables discharge, low (~GND) disables it during over-discharge/over-current/short-circuit protection. VODH = VCC-0.02V typ, VODL = 0.1V typ."+ },+ {+ "number": "2",+ "name": "CS",+ "type": "input",+ "description": "Current-sense and charger-detect input. Monitors the voltage between BATT- and GND (across the two series MOSFETs) to detect discharge over-current (VOI1=176mV typ), load short-circuit (VOI2=1.00V typ), and charger connection (VCH). Absolute max VCC-14V to VCC+0.3V."+ },+ {+ "number": "3",+ "name": "OC",+ "type": "output",+ "description": "Charge control MOSFET gate driver. Drives the gate of the charge-control N-MOSFET; high (~VCC) enables charging, low (~GND) disables charging during over-charge protection. VOCH = VCC-0.02V typ, VOCL = 0.1V typ."+ },+ {+ "number": "4",+ "name": "TD",+ "type": "input",+ "description": "Test pin used to shorten the over-charge detection delay time so factory test cycles are reduced. Normally left unconnected in application (see typical application circuit)."+ },+ {+ "number": "5",+ "name": "VCC",+ "type": "power_in",+ "description": "Positive supply, connected to the battery positive terminal through a series resistor R1 (typ 100 Ω) with a 0.1 µF decoupling capacitor C1 to GND for charger ripple/disturbance suppression. Operating VCC range 2V to 5V (typ 3.6V); absolute max GND-0.3V to GND+10V."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground reference, connected to the battery negative terminal via the decoupling capacitor node. All internal detection voltages are referenced to this pin."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction",+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "cad_basis": {+ "from": [+ "README CAD section (factory cad_wording)",+ ".kicad_mod model path agrees"+ ],+ "missing": []+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "distributor_links": {+ "lcsc": "C479059",+ "digikey": false,+ "mouser": false+ },+ "distributor_check": {+ "checked_at": "2026-10-05T19:14:30Z",+ "source": "Component Ocean /api/assign-pns + lcsc_map",+ "digikey": {+ "pn": null,+ "status": "no match"+ },+ "mouser": {+ "pn": null,+ "status": "no match"+ }+ },+ "models_3d": [+ {+ "file": "pt438.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "c9fe686b4d1b56927a41fa84a9bc1efb61d8a45a123a3db43bcaa05c2891d635",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "pt438-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 2.8,+ 2.9,+ 1.55+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "5539ffcf811f89f67445714dd5658bf88dcd3421f30a6acb388b64b7e78703d5",+ "checked": "2026-10-07",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public"+}
page.json+7−7@@ -1,6 +1,6 @@ { "slug": "pt438",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "PUOLOP Battery Management, SOT-23-6L. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "tags": [@@ -25,11 +25,10 @@ "docs/pt438-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html",- "pt438-etched.step"+ "pt438-etched.step",+ "pt438-etched.glb" ],- "visibility": {- "public": true- },+ "visibility": "public", "author": { "name": "Ray" },@@ -158,5 +157,6 @@ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ]- }-}+ },+ "org": "adom"+}