← Commit history
page.json+8−5@@ -38,13 +38,13 @@ "number": "2", "name": "CSN", "type": "input",- "description": "LED current-sense input. Connect an external current-sense resistor R_CS between VIN and CSN to program average LED current; the internal comparator regulates (VIN-VCSN) to a nominal 200 mV threshold (194-206 mV) with \u00b115% hysteresis."+ "description": "LED current-sense input. Connect an external current-sense resistor R_CS between VIN and CSN to program average LED current; the internal comparator regulates (VIN-VCSN) to a nominal 200 mV threshold (194-206 mV) with ±15% hysteresis." }, { "number": "3", "name": "DIM", "type": "input",- "description": "Logic-level dimming / enable input. Drive DIM low (<0.3 V) to turn off the current regulator, high (>2.5 V) to enable full LED current. Accepts either a PWM signal (100 Hz-20 kHz) or a DC voltage (0.5-2.5 V) to set output current. Internal 200 k\u03a9 pull-up to a 4.2 V internal supply."+ "description": "Logic-level dimming / enable input. Drive DIM low (<0.3 V) to turn off the current regulator, high (>2.5 V) to enable full LED current. Accepts either a PWM signal (100 Hz-20 kHz) or a DC voltage (0.5-2.5 V) to set output current. Internal 200 kΩ pull-up to a 4.2 V internal supply." }, { "number": "4",@@ -56,13 +56,13 @@ "number": "5", "name": "DRV", "type": "output",- "description": "Gate-driver output for the external N-channel power MOSFET. Push-pull output (~6 \u03a9 source / 2 \u03a9 sink) swinging to VCC (~5 V); V_OH \u2248 4.8 V and V_OL \u2264 0.5 V at I_DRV = 10 mA."+ "description": "Gate-driver output for the external N-channel power MOSFET. Push-pull output (~6 Ω source / 2 Ω sink) swinging to VCC (~5 V); V_OH ≈ 4.8 V and V_OL ≤ 0.5 V at I_DRV = 10 mA." }, { "number": "6", "name": "VCC", "type": "power_out",- "description": "Internal LDO regulator output, typically 5.0 V (4.5-5.5 V). Supplies internal circuitry and the gate driver. Connect a 1 \u00b5F decoupling capacitor from VCC to GND. Do not load externally."+ "description": "Internal LDO regulator output, typically 5.0 V (4.5-5.5 V). Supplies internal circuitry and the gate driver. Connect a 1 µF decoupling capacitor from VCC to GND. Do not load externally." } ], "provenance": {@@ -126,5 +126,8 @@ "docs/pt4121ee23f-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ]+ ],+ "visibility": {+ "public": true+ } }