PT4115B89E

@@ -26,13 +26,15 @@       "model_3d_step": "pt4115b89e.step",       "lbr": "pt4115b89e.lbr"     },-    "distributor_links": {},+    "distributor_links": {+      "lcsc": "C84512"+    },     "pins": [       {         "number": "1",         "name": "SW",         "type": "output",-        "description": "Switch output. Drain of the internal high-side N-channel MOSFET switch (Rds(on) ~0.4-0.6 Ω, Isw <=1.2 A continuous, absolute max 1.5 A, -0.3 to 45 V). Connects to the inductor (and the freewheel diode cathode) in the buck power stage."+        "description": "Switch output. Drain of the internal high-side N-channel MOSFET switch (Rds(on) ~0.4-0.6 \u03a9, Isw <=1.2 A continuous, absolute max 1.5 A, -0.3 to 45 V). Connects to the inductor (and the freewheel diode cathode) in the buck power stage."       },       {         "number": "2",@@ -44,19 +46,19 @@         "number": "3",         "name": "DIM",         "type": "input",-        "description": "Logic-level dimming / enable input. Drive below 0.3 V to disable the current regulator (shutdown, Iq ~95 µA); drive >=2.5 V to enable full LED current. Accepts a DC voltage from 0.5-2.5 V for linear brightness control, or a PWM signal from 100 Hz up to 20 kHz for duty-cycle dimming (5000:1 range). Internally pulled to a 5 V rail via a ~200 kΩ resistor, so the pin may be left floating for always-on operation. Absolute max -0.3 to 6 V."+        "description": "Logic-level dimming / enable input. Drive below 0.3 V to disable the current regulator (shutdown, Iq ~95 \u00b5A); drive >=2.5 V to enable full LED current. Accepts a DC voltage from 0.5-2.5 V for linear brightness control, or a PWM signal from 100 Hz up to 20 kHz for duty-cycle dimming (5000:1 range). Internally pulled to a 5 V rail via a ~200 k\u03a9 resistor, so the pin may be left floating for always-on operation. Absolute max -0.3 to 6 V."       },       {         "number": "4",         "name": "CSN",         "type": "input",-        "description": "High-side current-sense input. Connects to the low side of the external sense resistor Rs (which sits between VIN and CSN). The internal comparator regulates the average voltage (VIN - VCSN) to ~100 mV (98 mV A-type / 102 mV B-type), giving ILED_avg ≈ 0.1 V / Rs. Input current ~8 µA; absolute max +0.3 V to -6.0 V with respect to VIN."+        "description": "High-side current-sense input. Connects to the low side of the external sense resistor Rs (which sits between VIN and CSN). The internal comparator regulates the average voltage (VIN - VCSN) to ~100 mV (98 mV A-type / 102 mV B-type), giving ILED_avg \u2248 0.1 V / Rs. Input current ~8 \u00b5A; absolute max +0.3 V to -6.0 V with respect to VIN."       },       {         "number": "5",         "name": "VIN",         "type": "power_in",-        "description": "Input supply pin. Operating range 6 V to 30 V (absolute max -0.3 to 45 V); UVLO ~5.1 V with ~500 mV hysteresis. Must be locally bypassed (typ. 100 µF ceramic/electrolytic to GND close to the pin). Also serves as the high-side reference for the current-sense comparator."+        "description": "Input supply pin. Operating range 6 V to 30 V (absolute max -0.3 to 45 V); UVLO ~5.1 V with ~500 mV hysteresis. Must be locally bypassed (typ. 100 \u00b5F ceramic/electrolytic to GND close to the pin). Also serves as the high-side reference for the current-sense comparator."       }     ],     "provenance": {

@@ -59,6 +59,12 @@   <smd name="3" x="-1.8500" y="-1.5000" dx="1.5000" dy="0.7000" layer="1"/>   <smd name="4" x="1.8500" y="-1.5000" dx="1.5000" dy="0.7000" layer="1"/>   <smd name="5" x="1.8500" y="1.5000" dx="1.5000" dy="0.7000" layer="1"/>+  <polygon width="0.1200" layer="21">+    <vertex x="-1.7700" y="2.2100"/>+    <vertex x="-2.0100" y="2.5400"/>+    <vertex x="-1.5300" y="2.5400"/>+    <vertex x="-1.7700" y="2.2100"/>+  </polygon>   <wire x1="-1.2500" y1="2.3600" x2="1.2500" y2="2.3600" width="0.1200" layer="21"/>   <wire x1="1.2500" y1="-2.3600" x2="-1.2500" y2="-2.3600" width="0.1200" layer="21"/>   <wire x1="-1.2500" y1="1.2500" x2="-0.2500" y2="2.2500" width="0.1000" layer="51"/>@@ -68,7 +74,7 @@   <wire x1="1.2500" y1="-2.2500" x2="-1.2500" y2="-2.2500" width="0.1000" layer="51"/>   <text x="0" y="2.960" size="1.27" layer="25" align="bottom-center">&gt;NAME</text>   <text x="0" y="-2.960" size="1.27" layer="27" align="top-center">&gt;VALUE</text>-<!--adom-pin1--><polygon width="0.0500" layer="21"><vertex x="-1.7700" y="2.2100"/><vertex x="-2.0100" y="2.5400"/><vertex x="-1.5300" y="2.5400"/><vertex x="-1.7700" y="2.2100"/></polygon></package>+</package> </packages> <symbols> <symbol name="PT4115B89E">@@ -100,7 +106,13 @@         <connect gate="G$1" pin="VIN" pad="5"/>         <connect gate="G$1" pin="CSN" pad="4"/>       </connects>-      <technologies><technology name=""/></technologies>+      <technologies>+        <technology name="">+          <attribute name="MPN" value="PT4115B89E" constant="no"/>+          <attribute name="MANUFACTURER" value="PowTech CR PowTech Shanghai" constant="no"/>+          <attribute name="LCSC_PN" value="C84512" constant="no"/>+        </technology>+      </technologies>     </device>   </devices> </deviceset>