← Commit history
page.json+116−8@@ -1,13 +1,126 @@ {+ "schema_version": 1,+ "type": "component", "slug": "pt4056",+ "title": "PT4056",+ "brief": "PUOLOP Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.", "version": "0.1.0",- "type": "component",- "description": "PUOLOP Battery Management, ESOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+ "license": "CC-BY-SA-4.0", "tags": [ "component", "pmic", "pt4056" ],+ "component": {+ "mpn": "PT4056",+ "manufacturer": "PUOLOP",+ "package": "ESOP-8",+ "pin_count": 8,+ "category": "PMIC",+ "subcategory": "Battery Management",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/9eef5984a98448208b5c93b1bb1fcd84.pdf",+ "parts": {+ "symbol": "pt4056.kicad_sym",+ "footprint": "pt4056.kicad_mod",+ "model_3d": "pt4056.glb",+ "model_3d_step": "pt4056.step",+ "lbr": "pt4056.lbr"+ },+ "distributor_links": {},+ "pins": [+ {+ "number": "1",+ "name": "TEMP",+ "type": "input",+ "description": "Battery temperature sense input. Connect to the output of an NTC thermistor divider on the battery pack. Charging is paused when V(TEMP) falls below 45% of Vcc (over-temp) or rises above 80% of Vcc (under-temp). Tie TEMP directly to GND to disable temperature monitoring while leaving other charge functions active."+ },+ {+ "number": "2",+ "name": "PROG",+ "type": "passive",+ "description": "Constant-current program and charge-current monitor pin. A resistor R_PROG from PROG to GND sets the fast-charge current: I_BAT = (V_PROG / R_PROG) \u00d7 1200, with V_PROG \u2248 1.0 V in constant-current mode (0.1 V during trickle). Pin voltage may be read to monitor instantaneous charge current. Max sink current 1200 \u00b5A; 2.0 \u00b5A internal pull-up."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Device ground. Also serves as the thermal reference; connect the SOP-8 exposed pad to this net with a low-impedance copper pour to meet the 130 \u00b0C/W \u03b8JA assumed in the datasheet."+ },+ {+ "number": "4",+ "name": "Vcc",+ "type": "power_in",+ "description": "Input supply from a USB port or wall adapter, 4.0 V typ 5 V max 6 V (abs-max \u22120.3 V to 7 V). Powers the internal circuitry and the pass FET (R_ON \u2248 650 m\u03a9). When (Vcc \u2212 V_BAT) drops below \u224830 mV the part enters low-power shutdown and the BAT pin sinks less than 2 \u00b5A. Decouple with 10 \u00b5F near the pin."+ },+ {+ "number": "5",+ "name": "BAT",+ "type": "power_out",+ "description": "Charge current output to the positive terminal of the single-cell Li-ion / Li-polymer battery. Regulates to the 4.2 V float voltage (4.137-4.263 V) and delivers up to 1200 mA (abs-max) charge current. Leakage into the battery is <2 \u00b5A when the chip is disabled or in sleep. Auto-recharge triggers when V_BAT falls \u2265150 mV below V_FLOAT."+ },+ {+ "number": "6",+ "name": "STDBY",+ "type": "output",+ "description": "Open-drain charge-complete indicator (active-low, name is bar-STDBY). Internal switch pulls the pin low when the charge cycle terminates; otherwise Hi-Z. Typical V_OL = 0.2 V at 3 mA sink, abs-max 10 V. Drives an LED to GND through a series resistor, or leave floating if unused."+ },+ {+ "number": "7",+ "name": "CHRG",+ "type": "output",+ "description": "Open-drain charge-in-progress indicator (active-low, name is bar-CHRG). Pulled low while the charger is delivering current to the battery; Hi-Z otherwise. With a 10 \u00b5F cap on BAT and no battery installed, pulses at \u22481-4 s to signal a missing battery. V_OL 0.2 V typ at 3 mA sink; abs-max 10 V."+ },+ {+ "number": "8",+ "name": "CE",+ "type": "input",+ "description": "Chip enable input. Logic high enables normal charging; logic low disables the charger and inhibits current into BAT. TTL and CMOS compatible; abs-max \u22120.3 V to 10 V. Tie to Vcc for always-on operation."+ }+ ],+ "provenance": {+ "extractor": "ds2sf",+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/9eef5984a98448208b5c93b1bb1fcd84.pdf",+ "pages": 11,+ "sha256": "2cc8eaa7b83f45d8",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 8,+ "described": 8,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "metadata": {+ "specs": {+ "Manufacturer": "PUOLOP",+ "Package": "ESOP-8",+ "Category": "PMIC",+ "Pins": "8"+ }+ },+ "sections": [+ "hero",+ "viewers",+ "readme",+ "breadcrumbs",+ "info"+ ],+ "discovery_triggers": [+ "pt4056"+ ],+ "discovery_pitch": "PT4056 (PUOLOP) component page with datasheet-verified CAD.",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }, "dependencies": {}, "hero": { "type": "image",@@ -25,10 +138,5 @@ "docs/pt4056-datasheet.pdf", "viewers/symbol.html", "viewers/footprint.html"- ],- "visibility": "public",- "author": {- "name": "Ray",- "email": "[email protected]"- }+ ] }