component
PS9124-F3-AX
Public Made by Adomby adom
RENESAS Logic Output Optocoupler, SO-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
Publish 0.1.0
15 files changed
+3500
README.md+87docs/hero.pngdocs/ps9124-f3-ax-datasheet.pdfpackage.json+181page.json+187ps9124-f3-ax-etched.glbps9124-f3-ax-hero.glbps9124-f3-ax-hero.overlay.json+216ps9124-f3-ax.glbps9124-f3-ax.kicad_mod+239ps9124-f3-ax.kicad_sym+37ps9124-f3-ax.lbr+119ps9124-f3-ax.step+2432viewers/footprint.html+1viewers/symbol.html+1README.mdadded+87@@ -0,0 +1,87 @@+# PS9124-F3-AX++**RENESAS** · Logic Output Optocoupler · SO-5++PS9124-F3-AX from RENESAS, in a SO-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | Anode | input | LED anode; forward current is 3.8 to 7.5 mA recommended (6.0 mA typ.) and 25 mA absolute maximum. |+| 2 | Cathode | input | LED cathode; reverse voltage between the LED terminals must not exceed 5 V absolute maximum. |+| 3 | GND | power_in | Detector ground; place a bypass capacitor of at least 0.1 µF between VCC and GND within 10 mm of the leads. |+| 4 | VO | output | Open-collector output that goes low when the LED is on and high when it is off; it needs a pull-up resistor of 330 Ω to 4 kΩ, is rated 7 V maximum and sinks 25 mA maximum. |+| 5 | VCC | power_in | Detector supply, recommended 2.7 to 3.6 V or 4.5 to 5.5 V, with 7 V absolute maximum. |+| 6 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | RENESAS |+| Package | SO-5 |+| Category | Optocoupler |+| Pins | 6 |++## Electrical characteristics++Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).++| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |+|---|---|---|---|---|---|---|---|+| Diode Forward Voltage | VF | 1.3 | 1.55 | 1.8 | V | IF = 10 mA, TA = 25C | 6 |+| Reverse Current | IR | | | 10 | A | VR = 3 V, TA = 25C | 6 |+| High Level Output Current (3.3 V) | IOH | | 1 | 80 | A | VCC = VO = 3.3 V, VF = 0.8 V | 6 |+| High Level Output Current (5.5 V) | IOH | | 1 | 100 | A | VCC = VO = 5.5 V, VF = 0.8 V | 6 |+| Low Level Output Voltage | VOL | | 0.2 | 0.6 | V | VCC = 3.3 V, IF = 4.5 mA, IOL = 13 mA | 6 |+| High Level Supply Current | ICCH | | 4 | 7 | mA | VCC = 3.3 V, IF = 0 mA, VO = open | 6 |+| Low Level Supply Current (3.3 V) | ICCL | | 6 | 10 | mA | VCC = 3.3 V, IF = 4.5 mA, VO = open | 6 |+| Low Level Supply Current (5.5 V) | ICCL | | 7 | 10 | mA | VCC = 5.5 V, IF = 4.5 mA, VO = open | 6 |+| Coupled Threshold Input Current (H-L) | IFHL | | 1 | 3 | mA | VCC = 3.3 V, RL = 350, VO = 0.8 V | 6 |+| Propagation Delay Time tPHL (25C, 3.3 V) | tPHL | | 40 | 75 | ns | TA = 25C, VCC = 3.3 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Propagation Delay Time tPHL (full temp, 3.3 V) | tPHL | | | 100 | ns | VCC = 3.3 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Propagation Delay Time tPHL (25C, 5 V) | tPHL | | 40 | 75 | ns | TA = 25C, VCC = 5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Propagation Delay Time tPHL (full temp, 5 V) | tPHL | | | 100 | ns | VCC = 5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Propagation Delay Time tPLH (25C, 3.3 V) | tPLH | | 50 | 75 | ns | TA = 25C, VCC = 3.3 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Propagation Delay Time tPLH (full temp, 3.3 V) | tPLH | | | 100 | ns | VCC = 3.3 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Propagation Delay Time tPLH (25C, 5 V) | tPLH | | 45 | 75 | ns | TA = 25C, VCC = 5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Propagation Delay Time tPLH (full temp, 5 V) | tPLH | | | 100 | ns | VCC = 5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Pulse Width Distortion | tPHL-tPLH | | 5 | 35 | ns | VCC = 3.3/5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Propagation Delay Skew | tpsk | | | 40 | ns | VCC = 3.3/5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| CM Transient Immunity at High Level Output | CMH | 10 | 15 | | kV/s | VCC = 3.3/5 V, TA = 25C, IF = 0 mA, VO > 2 V, RL = 350, VCM = 1 kV | 6 |+| CM Transient Immunity at Low Level Output | CML | 10 | 15 | | kV/s | VCC = 3.3/5 V, TA = 25C, IF = 4.5 mA, VO < 0.8 V, RL = 350, VCM = 1 kV | 6 |+| Terminal Capacitance | Ct | | 30 | | pF | f = 1 MHz, VF = 0 V, TA = 25C | 6 |+| Isolation Capacitance | CI-O | | 0.6 | | pF | V = 0 V, f = 1 MHz, TA = 25C | 6 |+| Rise Time | tr | | 20 | | ns | VCC = 3.3/5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Fall Time | tf | | 5 | | ns | VCC = 3.3/5 V, IF = 4.5 mA, RL = 350, CL = 15 pF | 6 |+| Diode Forward Current | IF | | | 25 | mA | TA = 25C | 5 |+| Reverse Voltage | VR | | | 5 | V | TA = 25C | 5 |+| Detector Supply Voltage | VCC | | | 7 | V | TA = 25C | 5 |+| Output Voltage | VO | | | 7 | V | TA = 25C | 5 |+| Output Current | IO | | | 25 | mA | TA = 25C | 5 |+| Power Dissipation | PC | | | 200 | mW | TA = 25C | 5 |+| Isolation Voltage | BV | | | 3750 | Vr.m.s. | AC 1 minute, TA = 25C, RH = 60%, input-output, pins 1-2 shorted, 3-5 shorted | 5 |+| Operating Ambient Temperature | TA | -40 | | 110 | C | | 5 |+| Storage Temperature | Tstg | -55 | | 125 | C | | 5 |+| Low Level Input Voltage | VFL | | | 0.8 | V | | 5 |+| High Level Input Current | IFH | 3.8 | 6 | 7.5 | mA | | 5 |+| Supply Voltage (3.3 V) | VCC | 2.7 | 3.3 | 3.6 | V | | 5 |+| Supply Voltage (5 V) | VCC | 4.5 | 5 | 5.5 | V | | 5 |++## CAD (KiCad official)++- Symbol: `PS9124-F3-AX`+- Footprint: `Package_SO:SO-6L_10x3.84mm_P1.27mm`+- 3D model: SO-5 (KiCad packages3D, STEP)+- 3D model files: `ps9124-f3-ax-etched.step` / `ps9124-f3-ax-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ps9124-f3-ax.step` / `ps9124-f3-ax.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [RENESAS datasheet](docs/ps9124-f3-ax-datasheet.pdf) (17 pp, sha256 `9024fba181d090a0`, retrieved 2026-10-23, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/ps9124-f3-ax-datasheet.pdf)
docs/hero.pngadded⋯ 1 unchanged line ⋯
docs/ps9124-f3-ax-datasheet.pdfadded⋯ 1 unchanged line ⋯
package.jsonadded+181@@ -0,0 +1,181 @@+{+ "slug": "ps9124-f3-ax",+ "version": "0.1.0",+ "type": "component",+ "description": "RENESAS Logic Output Optocoupler, SO-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "optocoupler",+ "ps9124-f3-ax",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ps9124-f3-ax.kicad_sym",+ "ps9124-f3-ax.kicad_mod",+ "ps9124-f3-ax.glb",+ "ps9124-f3-ax.step",+ "ps9124-f3-ax.lbr",+ "docs/hero.png",+ "docs/ps9124-f3-ax-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ps9124-f3-ax-hero.glb",+ "ps9124-f3-ax-hero.overlay.json",+ "ps9124-f3-ax-etched.glb"+ ],+ "component": {+ "mpn": "PS9124-F3-AX",+ "manufacturer": "RENESAS",+ "package": "SO-5",+ "pin_count": 6,+ "category": "Optocoupler",+ "subcategory": "Logic Output Optocoupler",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/80025cd3bc996ed9aa61d1d2e3faf0b4.pdf",+ "parts": {+ "symbol": "ps9124-f3-ax.kicad_sym",+ "footprint": "ps9124-f3-ax.kicad_mod",+ "model_3d": "ps9124-f3-ax-hero.glb",+ "model_3d_plain": "ps9124-f3-ax-etched.glb",+ "model_3d_step": "ps9124-f3-ax-etched.step",+ "model_3d_step_plain": "ps9124-f3-ax.step",+ "lbr": "ps9124-f3-ax.lbr"+ },+ "distributor_links": {+ "lcsc": "C6148735",+ "digikey": "559-PS9124-F3-AXTR-ND",+ "mouser": "968-PS9124-F3-AX"+ },+ "distributor_check": {+ "checked_at": "2026-10-23T12:14:22Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "559-PS9124-F3-AXTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "968-PS9124-F3-AX",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "Anode",+ "type": "input",+ "description": "LED anode; forward current is 3.8 to 7.5 mA recommended (6.0 mA typ.) and 25 mA absolute maximum."+ },+ {+ "number": "2",+ "name": "Cathode",+ "type": "input",+ "description": "LED cathode; reverse voltage between the LED terminals must not exceed 5 V absolute maximum."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Detector ground; place a bypass capacitor of at least 0.1 µF between VCC and GND within 10 mm of the leads."+ },+ {+ "number": "4",+ "name": "VO",+ "type": "output",+ "description": "Open-collector output that goes low when the LED is on and high when it is off; it needs a pull-up resistor of 330 Ω to 4 kΩ, is rated 7 V maximum and sinks 25 mA maximum."+ },+ {+ "number": "5",+ "name": "VCC",+ "type": "power_in",+ "description": "Detector supply, recommended 2.7 to 3.6 V or 4.5 to 5.5 V, with 7 V absolute maximum."+ },+ {+ "number": "6",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 17,+ "cost_usd": 0.12,+ "at": "2026-10-23T12:14:01"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/80025cd3bc996ed9aa61d1d2e3faf0b4.pdf",+ "pages": 17,+ "sha256": "9024fba181d090a0",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 6,+ "described": 6,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ps9124-f3-ax.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 10.0,+ 3.84,+ 2.2+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "6d7c6dcb6d9f5b6b58f8c496dba5488906b5e2d4cad76f63f3182aeba1fc0b09",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ps9124-f3-ax-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 10.0,+ 3.84,+ 2.2+ ],+ "zmin_mm": 0.0,+ "centre_offset_mm": 0.0,+ "footprint_binding": "identity",+ "sha256": "83c26356114bb3bc8d6cfbf8185fd87e5a63807302dc5f07a256be64678680df",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ }+}
page.jsonadded+187@@ -0,0 +1,187 @@+{+ "slug": "ps9124-f3-ax",+ "version": "0.1.0",+ "type": "component",+ "description": "RENESAS Logic Output Optocoupler, SO-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "optocoupler",+ "ps9124-f3-ax",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "ps9124-f3-ax.kicad_sym",+ "ps9124-f3-ax.kicad_mod",+ "ps9124-f3-ax.glb",+ "ps9124-f3-ax.step",+ "ps9124-f3-ax.lbr",+ "docs/hero.png",+ "docs/ps9124-f3-ax-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "ps9124-f3-ax-hero.glb",+ "ps9124-f3-ax-hero.overlay.json",+ "ps9124-f3-ax-etched.glb"+ ],+ "component": {+ "mpn": "PS9124-F3-AX",+ "manufacturer": "RENESAS",+ "package": "SO-5",+ "pin_count": 6,+ "category": "Optocoupler",+ "subcategory": "Logic Output Optocoupler",+ "datasheet": "https://datasheet.lcsc.com/datasheet/pdf/80025cd3bc996ed9aa61d1d2e3faf0b4.pdf",+ "parts": {+ "symbol": "ps9124-f3-ax.kicad_sym",+ "footprint": "ps9124-f3-ax.kicad_mod",+ "model_3d": "ps9124-f3-ax-hero.glb",+ "model_3d_plain": "ps9124-f3-ax-etched.glb",+ "model_3d_step": "ps9124-f3-ax-etched.step",+ "model_3d_step_plain": "ps9124-f3-ax.step",+ "lbr": "ps9124-f3-ax.lbr"+ },+ "distributor_links": {+ "lcsc": "C6148735",+ "digikey": "559-PS9124-F3-AXTR-ND",+ "mouser": "968-PS9124-F3-AX"+ },+ "distributor_check": {+ "checked_at": "2026-10-23T12:14:22Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "559-PS9124-F3-AXTR-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "968-PS9124-F3-AX",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "Anode",+ "type": "input",+ "description": "LED anode; forward current is 3.8 to 7.5 mA recommended (6.0 mA typ.) and 25 mA absolute maximum."+ },+ {+ "number": "2",+ "name": "Cathode",+ "type": "input",+ "description": "LED cathode; reverse voltage between the LED terminals must not exceed 5 V absolute maximum."+ },+ {+ "number": "3",+ "name": "GND",+ "type": "power_in",+ "description": "Detector ground; place a bypass capacitor of at least 0.1 µF between VCC and GND within 10 mm of the leads."+ },+ {+ "number": "4",+ "name": "VO",+ "type": "output",+ "description": "Open-collector output that goes low when the LED is on and high when it is off; it needs a pull-up resistor of 330 Ω to 4 kΩ, is rated 7 V maximum and sinks 25 mA maximum."+ },+ {+ "number": "5",+ "name": "VCC",+ "type": "power_in",+ "description": "Detector supply, recommended 2.7 to 3.6 V or 4.5 to 5.5 V, with 7 V absolute maximum."+ },+ {+ "number": "6",+ "name": "EP",+ "type": "passive",+ "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-sonnet-5-5",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 17,+ "cost_usd": 0.12,+ "at": "2026-10-23T12:14:01"+ },+ "datasheet": {+ "url": "https://datasheet.lcsc.com/datasheet/pdf/80025cd3bc996ed9aa61d1d2e3faf0b4.pdf",+ "pages": 17,+ "sha256": "9024fba181d090a0",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 6,+ "described": 6,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ },+ "models_3d": [+ {+ "file": "ps9124-f3-ax.step",+ "role": "plain",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 10,+ 3.84,+ 2.2+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "6d7c6dcb6d9f5b6b58f8c496dba5488906b5e2d4cad76f63f3182aeba1fc0b09",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ },+ {+ "file": "ps9124-f3-ax-etched.step",+ "role": "eda",+ "up": "Z",+ "units": "mm",+ "origin": "footprint origin = pad-pattern centre",+ "seat": "z = 0",+ "extents_mm": [+ 10,+ 3.84,+ 2.2+ ],+ "zmin_mm": 0,+ "centre_offset_mm": 0,+ "footprint_binding": "identity",+ "sha256": "83c26356114bb3bc8d6cfbf8185fd87e5a63807302dc5f07a256be64678680df",+ "checked": "2026-10-23",+ "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"+ }+ ]+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}
ps9124-f3-ax-etched.glbadded⋯ 1 unchanged line ⋯
ps9124-f3-ax-hero.glbadded⋯ 1 unchanged line ⋯
ps9124-f3-ax-hero.overlay.jsonadded+216@@ -0,0 +1,216 @@+{+ "spec": "adom-hero 1.4",+ "mpn": "PS9124-F3-AX",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 6,+ "span_mm": 10.3,+ "dash_mm": 0.2575,+ "gap_mm": 0.1545,+ "pad_stroke_mm": 0.0618+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 3,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 6,+ "sides": "top + mirrored underside (single-sided)",+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "centre_offset_mm": 0.0,+ "tolerance_mm": 0.864,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -5.0,+ 5.0,+ -1.762,+ 1.762+ ],+ "pads_bbox_mm": [+ -5.4,+ 5.4,+ -1.67,+ 1.67+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "ps9124-f3-ax-etched.glb",+ "glb_sha256": "900776b5db45c00e5143ba6e7f9450274648ba0e73b37dec849b282c649daac5",+ "footprint": "ps9124-f3-ax.kicad_mod",+ "footprint_sha256": "afb20c2c5f2e36f1649ef6be65db5ccdc992bdd737f75e9453e0db372f88780b",+ "pins": "page.json component.pins",+ "pins_sha256": "0a7fa539e27074895d557ead1bc69aa2a6a8baef13abdf52df5421c74edf8dfa"+ },+ "generator": "adom-wiki 1.7.80 (component_hero)",+ "labels": [+ {+ "pad": "1",+ "text": "Anode",+ "x": -5.55,+ "y": -1.27,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "2",+ "text": "Cathode",+ "x": -5.55,+ "y": 0.0,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "3",+ "text": "GND",+ "x": -5.55,+ "y": 1.27,+ "align": "right",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "4",+ "text": "VO",+ "x": 5.55,+ "y": 1.27,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "5",+ "text": "VCC",+ "x": 5.55,+ "y": 0.0,+ "align": "left",+ "vertical": false,+ "h": 0.6+ },+ {+ "pad": "6",+ "text": "EP",+ "x": 5.55,+ "y": -1.27,+ "align": "left",+ "vertical": false,+ "h": 0.6+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "rect",+ "center_mm": [+ -4.75,+ -1.27+ ],+ "size_mm": [+ 0.8,+ 1.3+ ],+ "rot": 90.0+ },+ {+ "number": "2",+ "shape": "rect",+ "center_mm": [+ -4.75,+ 0.0+ ],+ "size_mm": [+ 0.8,+ 1.3+ ],+ "rot": 90.0+ },+ {+ "number": "3",+ "shape": "rect",+ "center_mm": [+ -4.75,+ 1.27+ ],+ "size_mm": [+ 0.8,+ 1.3+ ],+ "rot": 90.0+ },+ {+ "number": "4",+ "shape": "rect",+ "center_mm": [+ 4.75,+ 1.27+ ],+ "size_mm": [+ 0.8,+ 1.3+ ],+ "rot": 90.0+ },+ {+ "number": "5",+ "shape": "rect",+ "center_mm": [+ 4.75,+ 0.0+ ],+ "size_mm": [+ 0.8,+ 1.3+ ],+ "rot": 90.0+ },+ {+ "number": "6",+ "shape": "rect",+ "center_mm": [+ 4.75,+ -1.27+ ],+ "size_mm": [+ 0.8,+ 1.3+ ],+ "rot": 90.0+ }+ ]+}
ps9124-f3-ax.glbadded⋯ 1 unchanged line ⋯
ps9124-f3-ax.kicad_modadded+239@@ -0,0 +1,239 @@+(footprint "SO-6L_10x3.84mm_P1.27mm"+ (version 20260206)+ (generator "pcbnew")+ (generator_version "10.0")+ (layer "F.Cu")+ (descr "6-pin plasic small outline 7,5mm long https://toshiba.semicon-storage.com/info/docget.jsp?did=53548&prodName=TLP2770")+ (tags "SO-6L")+ (property "Reference" "REF**"+ (at -3.7 -2.9 0)+ (layer "F.SilkS")+ (uuid "7bb2bf84-5272-4671-bf67-10a65c5643a6")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Value" "SO-6L_10x3.84mm_P1.27mm"+ (at 0.1 3.2 0)+ (layer "F.Fab")+ (uuid "e4ab6add-0b50-4af9-b890-cab0c8ebee0c")+ (effects+ (font+ (size 1 1)+ (thickness 0.15)+ )+ )+ )+ (property "Datasheet" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "9a5913eb-c840-4dfd-a425-9275551cf36a")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (property "Description" ""+ (at 0 0 0)+ (unlocked yes)+ (layer "F.Fab")+ (hide yes)+ (uuid "10f9a948-40a8-44aa-a513-7bebc9224f96")+ (effects+ (font+ (size 1.27 1.27)+ (thickness 0.15)+ )+ )+ )+ (attr smd)+ (duplicate_pad_numbers_are_jumpers no)+ (fp_line+ (start -3.7 -2.05)+ (end 3.7 -2.05)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "137d6788-76c8-491b-ab84-0278c6a84fd7")+ )+ (fp_line+ (start -3.7 2.05)+ (end 3.7 2.05)+ (stroke+ (width 0.12)+ (type solid)+ )+ (layer "F.SilkS")+ (uuid "e7614bba-1513-4ed1-a155-4eca3c328fbd")+ )+ (fp_poly+ (pts+ (xy -4.75 -1.925) (xy -4.99 -2.255) (xy -4.51 -2.255) (xy -4.75 -1.925)+ )+ (stroke+ (width 0.12)+ (type solid)+ )+ (fill yes)+ (layer "F.SilkS")+ (uuid "09c50a82-c028-4eec-8490-53e8d6e33fb6")+ )+ (fp_line+ (start -5.65 -2.17)+ (end -5.65 2.17)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "55834195-1a72-4365-a6d1-049509b79ce9")+ )+ (fp_line+ (start -5.65 2.17)+ (end 5.65 2.17)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "ed6dabf7-e6be-40ac-8f16-4e7bae67474d")+ )+ (fp_line+ (start 5.65 -2.17)+ (end -5.65 -2.17)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "56ed3a3d-28a7-4b78-9733-9fcf2adcd536")+ )+ (fp_line+ (start 5.65 2.17)+ (end 5.65 -2.17)+ (stroke+ (width 0.05)+ (type solid)+ )+ (layer "F.CrtYd")+ (uuid "b4a05703-beb3-40fa-a870-ec6fca4307c0")+ )+ (fp_line+ (start -3.75 -0.9)+ (end -3 -1.92)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "b71c494b-8927-4db9-a6ac-deb52ccc2145")+ )+ (fp_line+ (start -3.75 1.92)+ (end -3.75 -0.9)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "02484cf0-b9cb-4f53-a7e1-88e5d0cd2eb3")+ )+ (fp_line+ (start -3.75 1.92)+ (end 3.75 1.92)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "0439ebd8-ccba-41dd-8c36-67cb827825b5")+ )+ (fp_line+ (start -3 -1.92)+ (end 3.75 -1.92)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "225ef79f-d8cf-4f2a-bfb0-bef06ce9292e")+ )+ (fp_line+ (start 3.75 1.92)+ (end 3.75 -1.92)+ (stroke+ (width 0.1)+ (type solid)+ )+ (layer "F.Fab")+ (uuid "196bbe9a-a6d1-432c-bfd5-a62df04e6362")+ )+ (fp_text user "${REFERENCE}"+ (at 0.3 0 180)+ (layer "F.Fab")+ (uuid "baf87166-9efa-4d92-bb57-5e1e5195f78e")+ (effects+ (font+ (size 0.5 0.5)+ (thickness 0.05)+ )+ )+ )+ (pad "1" smd rect+ (at -4.75 -1.27 90)+ (size 0.8 1.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "09356d0b-0d47-437e-a867-568d0c25bd40")+ )+ (pad "2" smd rect+ (at -4.75 0 90)+ (size 0.8 1.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "d98a4797-7ec7-4b71-91a4-b83d9aff85ea")+ )+ (pad "3" smd rect+ (at -4.75 1.27 90)+ (size 0.8 1.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "3ca1dcd1-b361-4c8e-b79e-e2cb6fabd719")+ )+ (pad "4" smd rect+ (at 4.75 1.27 90)+ (size 0.8 1.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "3cbecd89-efc5-4eab-b6bf-7037f77c5836")+ )+ (pad "5" smd rect+ (at 4.75 0 90)+ (size 0.8 1.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "d58c7cee-a0ca-47df-8f40-0c50f2679a58")+ )+ (pad "6" smd rect+ (at 4.75 -1.27 90)+ (size 0.8 1.3)+ (layers "F.Cu" "F.Mask" "F.Paste")+ (uuid "fc84be8d-2735-4d2c-8ee1-2ec74f11ecbf")+ )+ (embedded_fonts no)+ (model "${KICAD10_3DMODEL_DIR}/Package_SO.3dshapes/SO-6L_10x3.84mm_P1.27mm.step"+ (offset+ (xyz 0 0 0)+ )+ (scale+ (xyz 1 1 1)+ )+ (rotate+ (xyz 0 0 0)+ )+ )+)
ps9124-f3-ax.kicad_symadded+37@@ -0,0 +1,37 @@+(kicad_symbol_lib (version 20211014) (generator ds2sf_rect)+ (symbol "PS9124-F3-AX" (in_bom yes) (on_board yes)+ (property "Reference" "U" (at 0 7.62 0) (effects (font (size 1.27 1.27))))+ (property "Value" "PS9124-F3-AX" (at 0 -7.62 0) (effects (font (size 1.27 1.27))))+ (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) hide))+ (symbol "PS9124-F3-AX_0_1"+ (rectangle (start -12.70 5.08) (end 12.70 -5.08)+ (stroke (width 0.254) (type default)) (fill (type background)))+ )+ (symbol "PS9124-F3-AX_1_1"+ (pin input line (at -17.78 2.54 0) (length 5.08)+ (name "Anode" (effects (font (size 1.27 1.27))))+ (number "1" (effects (font (size 1.27 1.27))))+ )+ (pin input line (at -17.78 0.00 0) (length 5.08)+ (name "Cathode" (effects (font (size 1.27 1.27))))+ (number "2" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at -17.78 -2.54 0) (length 5.08)+ (name "GND" (effects (font (size 1.27 1.27))))+ (number "3" (effects (font (size 1.27 1.27))))+ )+ (pin passive line (at 17.78 2.54 180) (length 5.08)+ (name "EP" (effects (font (size 1.27 1.27))))+ (number "6" (effects (font (size 1.27 1.27))))+ )+ (pin power_in line (at 17.78 0.00 180) (length 5.08)+ (name "VCC" (effects (font (size 1.27 1.27))))+ (number "5" (effects (font (size 1.27 1.27))))+ )+ (pin output line (at 17.78 -2.54 180) (length 5.08)+ (name "VO" (effects (font (size 1.27 1.27))))+ (number "4" (effects (font (size 1.27 1.27))))+ )+ )+ )+)
ps9124-f3-ax.lbradded+119@@ -0,0 +1,119 @@+<?xml version="1.0" encoding="utf-8"?>+<!DOCTYPE eagle SYSTEM "eagle.dtd">+<eagle version="9.6.2">+<drawing>+<settings><setting alwaysvectorfont="no"/></settings>+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>+<layers>+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="yes"/>+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="yes"/>+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="yes"/>+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="yes"/>+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="yes"/>+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>+</layers>+<library>+<description></description>+<packages>+<package name="SO-6L_10x3.84mm_P1.27mm">+ <description>SO-6L, 10 x 3.84 mm, 1.27 mm pitch. 6-pin plasic small outline 7,5mm long</description>+ <smd name="1" x="-4.7500" y="1.2700" dx="0.8000" dy="1.3000" layer="1" rot="R90"/>+ <smd name="2" x="-4.7500" y="-0.0000" dx="0.8000" dy="1.3000" layer="1" rot="R90"/>+ <smd name="3" x="-4.7500" y="-1.2700" dx="0.8000" dy="1.3000" layer="1" rot="R90"/>+ <smd name="4" x="4.7500" y="-1.2700" dx="0.8000" dy="1.3000" layer="1" rot="R90"/>+ <smd name="5" x="4.7500" y="-0.0000" dx="0.8000" dy="1.3000" layer="1" rot="R90"/>+ <smd name="6" x="4.7500" y="1.2700" dx="0.8000" dy="1.3000" layer="1" rot="R90"/>+ <polygon width="0.1200" layer="21">+ <vertex x="-4.7500" y="1.9250"/>+ <vertex x="-4.9900" y="2.2550"/>+ <vertex x="-4.5100" y="2.2550"/>+ <vertex x="-4.7500" y="1.9250"/>+ </polygon>+ <wire x1="-3.7000" y1="2.0500" x2="3.7000" y2="2.0500" width="0.1200" layer="21"/>+ <wire x1="-3.7000" y1="-2.0500" x2="3.7000" y2="-2.0500" width="0.1200" layer="21"/>+ <wire x1="-3.7500" y1="0.9000" x2="-3.0000" y2="1.9200" width="0.1000" layer="51"/>+ <wire x1="-3.7500" y1="-1.9200" x2="-3.7500" y2="0.9000" width="0.1000" layer="51"/>+ <wire x1="-3.7500" y1="-1.9200" x2="3.7500" y2="-1.9200" width="0.1000" layer="51"/>+ <wire x1="-3.0000" y1="1.9200" x2="3.7500" y2="1.9200" width="0.1000" layer="51"/>+ <wire x1="3.7500" y1="-1.9200" x2="3.7500" y2="1.9200" width="0.1000" layer="51"/>+ <text x="0" y="2.650" size="1.27" layer="25" align="bottom-center">>NAME</text>+ <text x="0" y="-2.650" size="1.27" layer="27" align="top-center">>VALUE</text>+</package>+</packages>+<symbols>+<symbol name="PS9124-F3-AX">+ <wire x1="-12.7" y1="5.08" x2="12.7" y2="5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="5.08" x2="12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="12.7" y1="-5.08" x2="-12.7" y2="-5.08" width="0.254" layer="94"/>+ <wire x1="-12.7" y1="-5.08" x2="-12.7" y2="5.08" width="0.254" layer="94"/>+ <text x="0.0000" y="7.6200" size="1.27" layer="95" align="center">>NAME</text>+ <text x="0.0000" y="-7.6200" size="1.27" layer="96" align="center">>VALUE</text>+ <pin name="Anode" x="-17.78" y="2.54" length="middle" direction="in"/>+ <pin name="Cathode" x="-17.78" y="0" length="middle" direction="in"/>+ <pin name="GND" x="-17.78" y="-2.54" length="middle" direction="pwr"/>+ <pin name="EP" x="17.78" y="2.54" length="middle" direction="pas" rot="R180"/>+ <pin name="VCC" x="17.78" y="0" length="middle" direction="pwr" rot="R180"/>+ <pin name="VO" x="17.78" y="-2.54" length="middle" direction="out" rot="R180"/>+</symbol>+</symbols>+<devicesets>+<deviceset name="PS9124-F3-AX" prefix="U">+ <description></description>+ <gates>+ <gate name="G$1" symbol="PS9124-F3-AX" x="0" y="0"/>+ </gates>+ <devices>+ <device name="" package="SO-6L_10x3.84mm_P1.27mm">+ <connects>+ <connect gate="G$1" pin="Anode" pad="1"/>+ <connect gate="G$1" pin="Cathode" pad="2"/>+ <connect gate="G$1" pin="GND" pad="3"/>+ <connect gate="G$1" pin="EP" pad="6"/>+ <connect gate="G$1" pin="VCC" pad="5"/>+ <connect gate="G$1" pin="VO" pad="4"/>+ </connects>+ <technologies><technology name=""/></technologies>+ </device>+ </devices>+</deviceset>+</devicesets>+</library>+</drawing>+</eagle>
ps9124-f3-ax.stepadded+2432@@ -0,0 +1,2432 @@+ISO-10303-21;+HEADER;+/* SO-6L_10x3.84mm_P1.27mm.step 3D STEP model for use in ECAD systems+ * Copyright (C) 2025, KiCAD+ *+ * This work is licensed under the+ * [Creative Commons CC-BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/legalcode),+ * with the following exception:+ *+ * To the extent that the creation of electronic designs that use 'Licensed Material' can be+ * considered to be 'Adapted Material', then the copyright holder waives article 3 of the license+ * with respect to these designs and any generated files which use data provided as part of the+ * 'Licensed Material'.+ *+ * You are free to use the library data in your own projects without the obligation to share your+ * project files under this or any other license agreement. However, if you wish to distribute+ * these libraries, or parts thereof (including in modified form) as a collection then the exception+ * above does not apply. Please refer to+ * https://gitlab.com/kicad/libraries/kicad-packages3D/-/blob/master/LICENSE.md for further clarification+ * of the exception.+ *+ * Disclaimer of Warranties and Limitation of Liability.+ * These libraries are provided in the hope that they will be useful, but are provided without warranty of any kind, express or implied.+ * USE 3D CAD DATA AT YOUR OWN RISK+ * DO NOT RELY UPON ANY INFORMATION FOUND HERE WITHOUT INDEPENDENT VERIFICATION.+ */++FILE_DESCRIPTION(+/* description */ ('model of SO-6L_10x3.84mm_P1.27mm'),+/* implementation_level */ '2;1');++FILE_NAME(+/* name */ 'SO-6L_10x3.84mm_P1.27mm.step',+/* time_stamp */ '1970-01-01T00:00:00',+/* author */ ('KiCAD','kicad'),+/* organization */ ('OCCT'),+/* preprocessor_version */ '',+/* originating_system */ 'KiCAD',+/* authorisation */ '');++FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));+ENDSEC;++DATA;+#1=APPLICATION_PROTOCOL_DEFINITION('international standard','automotive_design',2000,#2);+#2=APPLICATION_CONTEXT('core data for automotive mechanical design processes');+#3=SHAPE_DEFINITION_REPRESENTATION(#4,#10);+#4=PRODUCT_DEFINITION_SHAPE('','',#5);+#5=PRODUCT_DEFINITION('design','',#6,#9);+#6=PRODUCT_DEFINITION_FORMATION('','',#7);+#7=PRODUCT('SO-6L_10x3.84mm_P1.27mm','SO-6L_10x3.84mm_P1.27mm','',(#8));+#8=PRODUCT_CONTEXT('',#2,'mechanical');+#9=PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');+#10=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#2238);+#11=AXIS2_PLACEMENT_3D('',#12,#13,#14);+#12=CARTESIAN_POINT('',(0.,0.,0.));+#13=DIRECTION('',(0.,0.,1.));+#14=DIRECTION('',(1.,0.,-0.));+#15=MANIFOLD_SOLID_BREP('',#16);+#16=CLOSED_SHELL('',(#17,#43,#97,#110,#129,#142,#179,#216,#229,#242,#251,#266,#330,#341,#360,#385,#403,#424,#442,#463,#473,#485,#506,#524,#545,#563,#584,#601,#616,#631,#642,#665,#703,#717,#731,#745,#783,#803,#834,#905,#923,#976,#987,#1047,#1064,#1117,#1125,#1183,#1200,#1248,#1314,#1330,#1378,#1388,#1448,#1464,#1517,#1528,#1588,#1604,#1655,#1665,#1677,#1689,#1723,#1733,#1745,#1757,#1767,#1777,#1785,#1795,#1806,#1816,#1826,#1836,#1846,#1856,#1865,#1875,#1885,#1895,#1905,#1915,#1925,#1935,#1943,#1953,#1963,#1973,#1983,#1993,#2003,#2011,#2022,#2031,#2041,#2051,#2061,#2071,#2080,#2090,#2100,#2109,#2119,#2129,#2139,#2149,#2157,#2167,#2177,#2186,#2196,#2206,#2216,#2226,#2234));+#17=ADVANCED_FACE('',(#18),#42,.F.);+#18=FACE_BOUND('',#19,.F.);+#19=EDGE_LOOP('',(#20,#29,#34,#39));+#20=ORIENTED_EDGE('',*,*,#21,.T.);+#21=EDGE_CURVE('',#22,#24,#26,.T.);+#22=VERTEX_POINT('',#23);+#23=CARTESIAN_POINT('',(-3.495807779838,1.761615559675,0.1));+#24=VERTEX_POINT('',#25);+#25=CARTESIAN_POINT('',(3.495807779838,1.761615559675,0.1));+#26=LINE('',#23,#27);+#27=VECTOR('',#28,1.);+#28=DIRECTION('',(1.,1.110223024625E-16,0.));+#29=ORIENTED_EDGE('',*,*,#30,.T.);+#30=EDGE_CURVE('',#24,#31,#33,.T.);+#31=VERTEX_POINT('',#32);+#32=CARTESIAN_POINT('',(3.575,1.92,1.1));+#33=B_SPLINE_CURVE_WITH_KNOTS('',1,(#25,#32),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#34=ORIENTED_EDGE('',*,*,#35,.F.);+#35=EDGE_CURVE('',#36,#31,#38,.T.);+#36=VERTEX_POINT('',#37);+#37=CARTESIAN_POINT('',(-3.575,1.92,1.1));+#38=LINE('',#37,#27);+#39=ORIENTED_EDGE('',*,*,#40,.F.);+#40=EDGE_CURVE('',#22,#36,#41,.T.);+#41=B_SPLINE_CURVE_WITH_KNOTS('',1,(#23,#37),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#42=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#23,#37),(#25,#32)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.15),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#43=ADVANCED_FACE('',(#44),#93,.T.);+#44=FACE_BOUND('',#45,.T.);+#45=EDGE_LOOP('',(#20,#46,#53,#60,#67,#74,#81,#88));+#46=ORIENTED_EDGE('',*,*,#47,.T.);+#47=EDGE_CURVE('',#24,#48,#50,.T.);+#48=VERTEX_POINT('',#49);+#49=CARTESIAN_POINT('',(3.591615559675,1.665807779838,0.1));+#50=LINE('',#25,#51);+#51=VECTOR('',#52,1.);+#52=DIRECTION('',(0.707106781187,-0.707106781187,0.));+#53=ORIENTED_EDGE('',*,*,#54,.T.);+#54=EDGE_CURVE('',#48,#55,#57,.T.);+#55=VERTEX_POINT('',#56);+#56=CARTESIAN_POINT('',(3.591615559675,-1.665807779838,0.1));+#57=LINE('',#49,#58);+#58=VECTOR('',#59,1.);+#59=DIRECTION('',(1.110223024625E-16,-1.,0.));+#60=ORIENTED_EDGE('',*,*,#61,.T.);+#61=EDGE_CURVE('',#55,#62,#64,.T.);+#62=VERTEX_POINT('',#63);+#63=CARTESIAN_POINT('',(3.495807779838,-1.761615559675,0.1));+#64=LINE('',#56,#65);+#65=VECTOR('',#66,1.);+#66=DIRECTION('',(-0.707106781187,-0.707106781187,0.));+#67=ORIENTED_EDGE('',*,*,#68,.T.);+#68=EDGE_CURVE('',#62,#69,#71,.T.);+#69=VERTEX_POINT('',#70);+#70=CARTESIAN_POINT('',(-3.495807779838,-1.761615559675,0.1));+#71=LINE('',#63,#72);+#72=VECTOR('',#73,1.);+#73=DIRECTION('',(-1.,-1.110223024625E-16,0.));+#74=ORIENTED_EDGE('',*,*,#75,.T.);+#75=EDGE_CURVE('',#69,#76,#78,.T.);+#76=VERTEX_POINT('',#77);+#77=CARTESIAN_POINT('',(-3.591615559675,-1.665807779838,0.1));+#78=LINE('',#70,#79);+#79=VECTOR('',#80,1.);+#80=DIRECTION('',(-0.707106781187,0.707106781187,0.));+#81=ORIENTED_EDGE('',*,*,#82,.T.);+#82=EDGE_CURVE('',#76,#83,#85,.T.);+#83=VERTEX_POINT('',#84);+#84=CARTESIAN_POINT('',(-3.591615559675,1.665807779838,0.1));+#85=LINE('',#77,#86);+#86=VECTOR('',#87,1.);+#87=DIRECTION('',(-1.110223024625E-16,1.,0.));+#88=ORIENTED_EDGE('',*,*,#89,.T.);+#89=EDGE_CURVE('',#83,#22,#90,.T.);+#90=LINE('',#84,#91);+#91=VECTOR('',#92,1.);+#92=DIRECTION('',(0.707106781187,0.707106781187,0.));+#93=PLANE('',#94);+#94=AXIS2_PLACEMENT_3D('',#23,#95,#96);+#95=DIRECTION('',(0.,0.,-1.));+#96=DIRECTION('',(0.900257589908,-0.435357636678,0.));+#97=ADVANCED_FACE('',(#98),#109,.F.);+#98=FACE_BOUND('',#99,.F.);+#99=EDGE_LOOP('',(#46,#100,#105,#108));+#100=ORIENTED_EDGE('',*,*,#101,.T.);+#101=EDGE_CURVE('',#48,#102,#104,.T.);+#102=VERTEX_POINT('',#103);+#103=CARTESIAN_POINT('',(3.75,1.745,1.1));+#104=B_SPLINE_CURVE_WITH_KNOTS('',1,(#49,#103),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#105=ORIENTED_EDGE('',*,*,#106,.F.);+#106=EDGE_CURVE('',#31,#102,#107,.T.);+#107=LINE('',#32,#51);+#108=ORIENTED_EDGE('',*,*,#30,.F.);+#109=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#25,#32),(#49,#103)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#110=ADVANCED_FACE('',(#111),#127,.F.);+#111=FACE_BOUND('',#112,.F.);+#112=EDGE_LOOP('',(#113,#114,#119,#124));+#113=ORIENTED_EDGE('',*,*,#35,.T.);+#114=ORIENTED_EDGE('',*,*,#115,.T.);+#115=EDGE_CURVE('',#31,#116,#118,.T.);+#116=VERTEX_POINT('',#117);+#117=CARTESIAN_POINT('',(3.575,1.92,1.2));+#118=B_SPLINE_CURVE_WITH_KNOTS('',1,(#32,#117),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#119=ORIENTED_EDGE('',*,*,#120,.F.);+#120=EDGE_CURVE('',#121,#116,#123,.T.);+#121=VERTEX_POINT('',#122);+#122=CARTESIAN_POINT('',(-3.575,1.92,1.2));+#123=LINE('',#122,#27);+#124=ORIENTED_EDGE('',*,*,#125,.F.);+#125=EDGE_CURVE('',#36,#121,#126,.T.);+#126=B_SPLINE_CURVE_WITH_KNOTS('',1,(#37,#122),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#127=PLANE('',#128);+#128=AXIS2_PLACEMENT_3D('',#122,#59,#28);+#129=ADVANCED_FACE('',(#130),#141,.F.);+#130=FACE_BOUND('',#131,.F.);+#131=EDGE_LOOP('',(#88,#132,#133,#138));+#132=ORIENTED_EDGE('',*,*,#40,.T.);+#133=ORIENTED_EDGE('',*,*,#134,.F.);+#134=EDGE_CURVE('',#135,#36,#137,.T.);+#135=VERTEX_POINT('',#136);+#136=CARTESIAN_POINT('',(-3.75,1.745,1.1));+#137=LINE('',#136,#91);+#138=ORIENTED_EDGE('',*,*,#139,.F.);+#139=EDGE_CURVE('',#83,#135,#140,.T.);+#140=B_SPLINE_CURVE_WITH_KNOTS('',1,(#84,#136),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#141=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#84,#136),(#23,#37)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#142=ADVANCED_FACE('',(#143),#178,.F.);+#143=FACE_BOUND('',#144,.F.);+#144=EDGE_LOOP('',(#81,#145,#146,#152,#156,#160,#164,#168,#172,#175));+#145=ORIENTED_EDGE('',*,*,#139,.T.);+#146=ORIENTED_EDGE('',*,*,#147,.F.);+#147=EDGE_CURVE('',#148,#135,#150,.T.);+#148=VERTEX_POINT('',#149);+#149=CARTESIAN_POINT('',(-3.75,1.46,1.1));+#150=LINE('',#151,#86);+#151=CARTESIAN_POINT('',(-3.75,-1.745,1.1));+#152=ORIENTED_EDGE('',*,*,#153,.F.);+#153=EDGE_CURVE('',#154,#148,#150,.T.);+#154=VERTEX_POINT('',#155);+#155=CARTESIAN_POINT('',(-3.75,1.08,1.1));+#156=ORIENTED_EDGE('',*,*,#157,.F.);+#157=EDGE_CURVE('',#158,#154,#150,.T.);+#158=VERTEX_POINT('',#159);+#159=CARTESIAN_POINT('',(-3.75,0.19,1.1));+#160=ORIENTED_EDGE('',*,*,#161,.F.);+#161=EDGE_CURVE('',#162,#158,#150,.T.);+#162=VERTEX_POINT('',#163);+#163=CARTESIAN_POINT('',(-3.75,-0.19,1.1));+#164=ORIENTED_EDGE('',*,*,#165,.F.);+#165=EDGE_CURVE('',#166,#162,#150,.T.);+#166=VERTEX_POINT('',#167);+#167=CARTESIAN_POINT('',(-3.75,-1.08,1.1));+#168=ORIENTED_EDGE('',*,*,#169,.F.);+#169=EDGE_CURVE('',#170,#166,#150,.T.);+#170=VERTEX_POINT('',#171);+#171=CARTESIAN_POINT('',(-3.75,-1.46,1.1));+#172=ORIENTED_EDGE('',*,*,#173,.F.);+#173=EDGE_CURVE('',#174,#170,#150,.T.);+#174=VERTEX_POINT('',#151);+#175=ORIENTED_EDGE('',*,*,#176,.F.);+#176=EDGE_CURVE('',#76,#174,#177,.T.);+#177=B_SPLINE_CURVE_WITH_KNOTS('',1,(#77,#151),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#178=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#77,#151),(#84,#136)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.49),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#179=ADVANCED_FACE('',(#180),#215,.F.);+#180=FACE_BOUND('',#181,.F.);+#181=EDGE_LOOP('',(#53,#182,#187,#192,#196,#200,#204,#208,#212,#214));+#182=ORIENTED_EDGE('',*,*,#183,.T.);+#183=EDGE_CURVE('',#55,#184,#186,.T.);+#184=VERTEX_POINT('',#185);+#185=CARTESIAN_POINT('',(3.75,-1.745,1.1));+#186=B_SPLINE_CURVE_WITH_KNOTS('',1,(#56,#185),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#187=ORIENTED_EDGE('',*,*,#188,.F.);+#188=EDGE_CURVE('',#189,#184,#191,.T.);+#189=VERTEX_POINT('',#190);+#190=CARTESIAN_POINT('',(3.75,-1.46,1.1));+#191=LINE('',#103,#58);+#192=ORIENTED_EDGE('',*,*,#193,.F.);+#193=EDGE_CURVE('',#194,#189,#191,.T.);+#194=VERTEX_POINT('',#195);+#195=CARTESIAN_POINT('',(3.75,-1.08,1.1));+#196=ORIENTED_EDGE('',*,*,#197,.F.);+#197=EDGE_CURVE('',#198,#194,#191,.T.);+#198=VERTEX_POINT('',#199);+#199=CARTESIAN_POINT('',(3.75,-0.19,1.1));+#200=ORIENTED_EDGE('',*,*,#201,.F.);+#201=EDGE_CURVE('',#202,#198,#191,.T.);+#202=VERTEX_POINT('',#203);+#203=CARTESIAN_POINT('',(3.75,0.19,1.1));+#204=ORIENTED_EDGE('',*,*,#205,.F.);+#205=EDGE_CURVE('',#206,#202,#191,.T.);+#206=VERTEX_POINT('',#207);+#207=CARTESIAN_POINT('',(3.75,1.08,1.1));+#208=ORIENTED_EDGE('',*,*,#209,.F.);+#209=EDGE_CURVE('',#210,#206,#191,.T.);+#210=VERTEX_POINT('',#211);+#211=CARTESIAN_POINT('',(3.75,1.46,1.1));+#212=ORIENTED_EDGE('',*,*,#213,.F.);+#213=EDGE_CURVE('',#102,#210,#191,.T.);+#214=ORIENTED_EDGE('',*,*,#101,.F.);+#215=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#49,#103),(#56,#185)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.49),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#216=ADVANCED_FACE('',(#217),#228,.F.);+#217=FACE_BOUND('',#218,.F.);+#218=EDGE_LOOP('',(#74,#219,#220,#225));+#219=ORIENTED_EDGE('',*,*,#176,.T.);+#220=ORIENTED_EDGE('',*,*,#221,.F.);+#221=EDGE_CURVE('',#222,#174,#224,.T.);+#222=VERTEX_POINT('',#223);+#223=CARTESIAN_POINT('',(-3.575,-1.92,1.1));+#224=LINE('',#223,#79);+#225=ORIENTED_EDGE('',*,*,#226,.F.);+#226=EDGE_CURVE('',#69,#222,#227,.T.);+#227=B_SPLINE_CURVE_WITH_KNOTS('',1,(#70,#223),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#228=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#70,#223),(#77,#151)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#229=ADVANCED_FACE('',(#230),#241,.F.);+#230=FACE_BOUND('',#231,.F.);+#231=EDGE_LOOP('',(#60,#232,#237,#240));+#232=ORIENTED_EDGE('',*,*,#233,.T.);+#233=EDGE_CURVE('',#62,#234,#236,.T.);+#234=VERTEX_POINT('',#235);+#235=CARTESIAN_POINT('',(3.575,-1.92,1.1));+#236=B_SPLINE_CURVE_WITH_KNOTS('',1,(#63,#235),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#237=ORIENTED_EDGE('',*,*,#238,.F.);+#238=EDGE_CURVE('',#184,#234,#239,.T.);+#239=LINE('',#185,#65);+#240=ORIENTED_EDGE('',*,*,#183,.F.);+#241=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#56,#185),(#63,#235)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#242=ADVANCED_FACE('',(#243),#250,.F.);+#243=FACE_BOUND('',#244,.F.);+#244=EDGE_LOOP('',(#67,#245,#246,#249));+#245=ORIENTED_EDGE('',*,*,#226,.T.);+#246=ORIENTED_EDGE('',*,*,#247,.F.);+#247=EDGE_CURVE('',#234,#222,#248,.T.);+#248=LINE('',#235,#72);+#249=ORIENTED_EDGE('',*,*,#233,.F.);+#250=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#63,#235),(#70,#223)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.15),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#251=ADVANCED_FACE('',(#252),#264,.F.);+#252=FACE_BOUND('',#253,.F.);+#253=EDGE_LOOP('',(#254,#255,#260,#263));+#254=ORIENTED_EDGE('',*,*,#106,.T.);+#255=ORIENTED_EDGE('',*,*,#256,.T.);+#256=EDGE_CURVE('',#102,#257,#259,.T.);+#257=VERTEX_POINT('',#258);+#258=CARTESIAN_POINT('',(3.75,1.745,1.2));+#259=B_SPLINE_CURVE_WITH_KNOTS('',1,(#103,#258),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#260=ORIENTED_EDGE('',*,*,#261,.F.);+#261=EDGE_CURVE('',#116,#257,#262,.T.);+#262=LINE('',#117,#51);+#263=ORIENTED_EDGE('',*,*,#115,.F.);+#264=PLANE('',#265);+#265=AXIS2_PLACEMENT_3D('',#117,#66,#52);+#266=ADVANCED_FACE('',(#267),#325,.F.);+#267=FACE_BOUND('',#268,.F.);+#268=EDGE_LOOP('',(#269,#274,#275,#276,#281,#287,#292,#297,#302,#307,#313,#321));+#269=ORIENTED_EDGE('',*,*,#270,.T.);+#270=EDGE_CURVE('',#271,#121,#273,.T.);+#271=VERTEX_POINT('',#272);+#272=CARTESIAN_POINT('',(-3.75,1.745,1.2));+#273=LINE('',#272,#91);+#274=ORIENTED_EDGE('',*,*,#120,.T.);+#275=ORIENTED_EDGE('',*,*,#261,.T.);+#276=ORIENTED_EDGE('',*,*,#277,.T.);+#277=EDGE_CURVE('',#257,#278,#280,.T.);+#278=VERTEX_POINT('',#279);+#279=CARTESIAN_POINT('',(3.75,1.46,1.2));+#280=LINE('',#258,#58);+#281=ORIENTED_EDGE('',*,*,#282,.T.);+#282=EDGE_CURVE('',#278,#283,#285,.T.);+#283=VERTEX_POINT('',#284);+#284=CARTESIAN_POINT('',(3.675,1.46,1.2));+#285=LINE('',#286,#72);+#286=CARTESIAN_POINT('',(4.05,1.46,1.2));+#287=ORIENTED_EDGE('',*,*,#288,.F.);+#288=EDGE_CURVE('',#289,#283,#291,.T.);+#289=VERTEX_POINT('',#290);+#290=CARTESIAN_POINT('',(3.675,1.7075,1.2));+#291=LINE('',#290,#58);+#292=ORIENTED_EDGE('',*,*,#293,.F.);+#293=EDGE_CURVE('',#294,#289,#296,.T.);+#294=VERTEX_POINT('',#295);+#295=CARTESIAN_POINT('',(3.5375,1.845,1.2));+#296=LINE('',#295,#51);+#297=ORIENTED_EDGE('',*,*,#298,.F.);+#298=EDGE_CURVE('',#299,#294,#301,.T.);+#299=VERTEX_POINT('',#300);+#300=CARTESIAN_POINT('',(-3.5375,1.845,1.2));+#301=LINE('',#300,#27);+#302=ORIENTED_EDGE('',*,*,#303,.F.);+#303=EDGE_CURVE('',#304,#299,#306,.T.);+#304=VERTEX_POINT('',#305);+#305=CARTESIAN_POINT('',(-3.675,1.7075,1.2));+#306=LINE('',#305,#91);+#307=ORIENTED_EDGE('',*,*,#308,.F.);+#308=EDGE_CURVE('',#309,#304,#311,.T.);+#309=VERTEX_POINT('',#310);+#310=CARTESIAN_POINT('',(-3.675,1.46,1.2));+#311=LINE('',#312,#86);+#312=CARTESIAN_POINT('',(-3.675,-1.7075,1.2));+#313=ORIENTED_EDGE('',*,*,#314,.F.);+#314=EDGE_CURVE('',#315,#309,#317,.T.);+#315=VERTEX_POINT('',#316);+#316=CARTESIAN_POINT('',(-3.75,1.46,1.2));+#317=LINE('',#318,#319);+#318=CARTESIAN_POINT('',(-4.05,1.46,1.2));+#319=VECTOR('',#320,1.);+#320=DIRECTION('',(1.,-1.144237745222E-17,0.));+#321=ORIENTED_EDGE('',*,*,#322,.T.);+#322=EDGE_CURVE('',#315,#271,#323,.T.);+#323=LINE('',#324,#86);+#324=CARTESIAN_POINT('',(-3.75,-1.745,1.2));+#325=PLANE('',#326);+#326=AXIS2_PLACEMENT_3D('',#327,#328,#329);+#327=CARTESIAN_POINT('',(-5.485281650385E-17,1.8825,1.2));+#328=DIRECTION('',(3.544037995401E-33,-2.194902243177E-28,-1.));+#329=DIRECTION('',(1.,1.132897318828E-16,3.544037995376E-33));+#330=ADVANCED_FACE('',(#331),#339,.F.);+#331=FACE_BOUND('',#332,.F.);+#332=EDGE_LOOP('',(#333,#334,#335,#336));+#333=ORIENTED_EDGE('',*,*,#134,.T.);+#334=ORIENTED_EDGE('',*,*,#125,.T.);+#335=ORIENTED_EDGE('',*,*,#270,.F.);+#336=ORIENTED_EDGE('',*,*,#337,.F.);+#337=EDGE_CURVE('',#135,#271,#338,.T.);+#338=B_SPLINE_CURVE_WITH_KNOTS('',1,(#136,#272),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#339=PLANE('',#340);+#340=AXIS2_PLACEMENT_3D('',#272,#52,#92);+#341=ADVANCED_FACE('',(#342),#358,.F.);+#342=FACE_BOUND('',#343,.F.);+#343=EDGE_LOOP('',(#344,#348,#349,#356));+#344=ORIENTED_EDGE('',*,*,#345,.F.);+#345=EDGE_CURVE('',#174,#346,#347,.T.);+#346=VERTEX_POINT('',#324);+#347=B_SPLINE_CURVE_WITH_KNOTS('',1,(#151,#324),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#348=ORIENTED_EDGE('',*,*,#173,.T.);+#349=ORIENTED_EDGE('',*,*,#350,.T.);+#350=EDGE_CURVE('',#170,#351,#353,.T.);+#351=VERTEX_POINT('',#352);+#352=CARTESIAN_POINT('',(-3.75,-1.46,1.2));+#353=LINE('',#354,#355);+#354=CARTESIAN_POINT('',(-3.75,-1.46,0.893069018303));+#355=VECTOR('',#13,1.);+#356=ORIENTED_EDGE('',*,*,#357,.F.);+#357=EDGE_CURVE('',#346,#351,#323,.T.);+#358=PLANE('',#359);+#359=AXIS2_PLACEMENT_3D('',#324,#28,#87);+#360=ADVANCED_FACE('',(#361),#383,.F.);+#361=FACE_BOUND('',#362,.F.);+#362=EDGE_LOOP('',(#363,#371,#372,#378));+#363=ORIENTED_EDGE('',*,*,#364,.F.);+#364=EDGE_CURVE('',#170,#365,#367,.T.);+#365=VERTEX_POINT('',#366);+#366=CARTESIAN_POINT('',(-4.05,-1.46,1.1));+#367=LINE('',#368,#369);+#368=CARTESIAN_POINT('',(-3.6,-1.46,1.1));+#369=VECTOR('',#370,1.);+#370=DIRECTION('',(-1.,1.144237745222E-17,0.));+#371=ORIENTED_EDGE('',*,*,#169,.T.);+#372=ORIENTED_EDGE('',*,*,#373,.T.);+#373=EDGE_CURVE('',#166,#374,#376,.T.);+#374=VERTEX_POINT('',#375);+#375=CARTESIAN_POINT('',(-4.05,-1.08,1.1));+#376=LINE('',#377,#369);+#377=CARTESIAN_POINT('',(-3.6,-1.08,1.1));+#378=ORIENTED_EDGE('',*,*,#379,.F.);+#379=EDGE_CURVE('',#365,#374,#380,.T.);+#380=LINE('',#366,#381);+#381=VECTOR('',#382,1.);+#382=DIRECTION('',(1.144237745222E-17,1.,0.));+#383=PLANE('',#384);+#384=AXIS2_PLACEMENT_3D('',#368,#13,#370);+#385=ADVANCED_FACE('',(#386),#358,.F.);+#386=FACE_BOUND('',#387,.F.);+#387=EDGE_LOOP('',(#388,#394,#395,#401));+#388=ORIENTED_EDGE('',*,*,#389,.F.);+#389=EDGE_CURVE('',#166,#390,#392,.T.);+#390=VERTEX_POINT('',#391);+#391=CARTESIAN_POINT('',(-3.75,-1.08,1.2));+#392=LINE('',#393,#355);+#393=CARTESIAN_POINT('',(-3.75,-1.08,0.893069018303));+#394=ORIENTED_EDGE('',*,*,#165,.T.);+#395=ORIENTED_EDGE('',*,*,#396,.T.);+#396=EDGE_CURVE('',#162,#397,#399,.T.);+#397=VERTEX_POINT('',#398);+#398=CARTESIAN_POINT('',(-3.75,-0.19,1.2));+#399=LINE('',#400,#355);+#400=CARTESIAN_POINT('',(-3.75,-0.19,0.893069018303));+#401=ORIENTED_EDGE('',*,*,#402,.F.);+#402=EDGE_CURVE('',#390,#397,#323,.T.);+#403=ADVANCED_FACE('',(#404),#422,.F.);+#404=FACE_BOUND('',#405,.F.);+#405=EDGE_LOOP('',(#406,#412,#413,#419));+#406=ORIENTED_EDGE('',*,*,#407,.F.);+#407=EDGE_CURVE('',#162,#408,#410,.T.);+#408=VERTEX_POINT('',#409);+#409=CARTESIAN_POINT('',(-4.05,-0.19,1.1));+#410=LINE('',#411,#369);+#411=CARTESIAN_POINT('',(-3.6,-0.19,1.1));+#412=ORIENTED_EDGE('',*,*,#161,.T.);+#413=ORIENTED_EDGE('',*,*,#414,.T.);+#414=EDGE_CURVE('',#158,#415,#417,.T.);+#415=VERTEX_POINT('',#416);+#416=CARTESIAN_POINT('',(-4.05,0.19,1.1));+#417=LINE('',#418,#369);+#418=CARTESIAN_POINT('',(-3.6,0.19,1.1));+#419=ORIENTED_EDGE('',*,*,#420,.F.);+#420=EDGE_CURVE('',#408,#415,#421,.T.);+#421=LINE('',#409,#381);+#422=PLANE('',#423);+#423=AXIS2_PLACEMENT_3D('',#411,#13,#370);+#424=ADVANCED_FACE('',(#425),#358,.F.);+#425=FACE_BOUND('',#426,.F.);+#426=EDGE_LOOP('',(#427,#433,#434,#440));+#427=ORIENTED_EDGE('',*,*,#428,.F.);+#428=EDGE_CURVE('',#158,#429,#431,.T.);+#429=VERTEX_POINT('',#430);+#430=CARTESIAN_POINT('',(-3.75,0.19,1.2));+#431=LINE('',#432,#355);+#432=CARTESIAN_POINT('',(-3.75,0.19,0.893069018303));+#433=ORIENTED_EDGE('',*,*,#157,.T.);+#434=ORIENTED_EDGE('',*,*,#435,.T.);+#435=EDGE_CURVE('',#154,#436,#438,.T.);+#436=VERTEX_POINT('',#437);+#437=CARTESIAN_POINT('',(-3.75,1.08,1.2));+#438=LINE('',#439,#355);+#439=CARTESIAN_POINT('',(-3.75,1.08,0.893069018303));+#440=ORIENTED_EDGE('',*,*,#441,.F.);+#441=EDGE_CURVE('',#429,#436,#323,.T.);+#442=ADVANCED_FACE('',(#443),#461,.F.);+#443=FACE_BOUND('',#444,.F.);+#444=EDGE_LOOP('',(#445,#451,#452,#458));+#445=ORIENTED_EDGE('',*,*,#446,.F.);+#446=EDGE_CURVE('',#154,#447,#449,.T.);+#447=VERTEX_POINT('',#448);+#448=CARTESIAN_POINT('',(-4.05,1.08,1.1));+#449=LINE('',#450,#369);+#450=CARTESIAN_POINT('',(-3.6,1.08,1.1));+#451=ORIENTED_EDGE('',*,*,#153,.T.);+#452=ORIENTED_EDGE('',*,*,#453,.T.);+#453=EDGE_CURVE('',#148,#454,#456,.T.);+#454=VERTEX_POINT('',#455);+#455=CARTESIAN_POINT('',(-4.05,1.46,1.1));+#456=LINE('',#457,#369);+#457=CARTESIAN_POINT('',(-3.6,1.46,1.1));+#458=ORIENTED_EDGE('',*,*,#459,.F.);+#459=EDGE_CURVE('',#447,#454,#460,.T.);+#460=LINE('',#448,#381);+#461=PLANE('',#462);+#462=AXIS2_PLACEMENT_3D('',#450,#13,#370);+#463=ADVANCED_FACE('',(#464),#358,.F.);+#464=FACE_BOUND('',#465,.F.);+#465=EDGE_LOOP('',(#466,#470,#471,#472));+#466=ORIENTED_EDGE('',*,*,#467,.F.);+#467=EDGE_CURVE('',#148,#315,#468,.T.);+#468=LINE('',#469,#355);+#469=CARTESIAN_POINT('',(-3.75,1.46,0.893069018303));+#470=ORIENTED_EDGE('',*,*,#147,.T.);+#471=ORIENTED_EDGE('',*,*,#337,.T.);+#472=ORIENTED_EDGE('',*,*,#322,.F.);+#473=ADVANCED_FACE('',(#474),#483,.F.);+#474=FACE_BOUND('',#475,.F.);+#475=EDGE_LOOP('',(#476,#477,#478,#482));+#476=ORIENTED_EDGE('',*,*,#256,.F.);+#477=ORIENTED_EDGE('',*,*,#213,.T.);+#478=ORIENTED_EDGE('',*,*,#479,.T.);+#479=EDGE_CURVE('',#210,#278,#480,.T.);+#480=LINE('',#481,#355);+#481=CARTESIAN_POINT('',(3.75,1.46,0.893069018303));+#482=ORIENTED_EDGE('',*,*,#277,.F.);+#483=PLANE('',#484);+#484=AXIS2_PLACEMENT_3D('',#258,#73,#59);+#485=ADVANCED_FACE('',(#486),#504,.F.);+#486=FACE_BOUND('',#487,.F.);+#487=EDGE_LOOP('',(#488,#494,#495,#501));+#488=ORIENTED_EDGE('',*,*,#489,.F.);+#489=EDGE_CURVE('',#210,#490,#492,.T.);+#490=VERTEX_POINT('',#491);+#491=CARTESIAN_POINT('',(4.05,1.46,1.1));+#492=LINE('',#493,#27);+#493=CARTESIAN_POINT('',(3.6,1.46,1.1));+#494=ORIENTED_EDGE('',*,*,#209,.T.);+#495=ORIENTED_EDGE('',*,*,#496,.T.);+#496=EDGE_CURVE('',#206,#497,#499,.T.);+#497=VERTEX_POINT('',#498);+#498=CARTESIAN_POINT('',(4.05,1.08,1.1));+#499=LINE('',#500,#27);+#500=CARTESIAN_POINT('',(3.6,1.08,1.1));+#501=ORIENTED_EDGE('',*,*,#502,.F.);+#502=EDGE_CURVE('',#490,#497,#503,.T.);+#503=LINE('',#491,#58);+#504=PLANE('',#505);+#505=AXIS2_PLACEMENT_3D('',#493,#13,#28);+#506=ADVANCED_FACE('',(#507),#483,.F.);+#507=FACE_BOUND('',#508,.F.);+#508=EDGE_LOOP('',(#509,#515,#516,#522));+#509=ORIENTED_EDGE('',*,*,#510,.F.);+#510=EDGE_CURVE('',#206,#511,#513,.T.);+#511=VERTEX_POINT('',#512);+#512=CARTESIAN_POINT('',(3.75,1.08,1.2));+#513=LINE('',#514,#355);+#514=CARTESIAN_POINT('',(3.75,1.08,0.893069018303));+#515=ORIENTED_EDGE('',*,*,#205,.T.);+#516=ORIENTED_EDGE('',*,*,#517,.T.);+#517=EDGE_CURVE('',#202,#518,#520,.T.);+#518=VERTEX_POINT('',#519);+#519=CARTESIAN_POINT('',(3.75,0.19,1.2));+#520=LINE('',#521,#355);+#521=CARTESIAN_POINT('',(3.75,0.19,0.893069018303));+#522=ORIENTED_EDGE('',*,*,#523,.F.);+#523=EDGE_CURVE('',#511,#518,#280,.T.);+#524=ADVANCED_FACE('',(#525),#543,.F.);+#525=FACE_BOUND('',#526,.F.);+#526=EDGE_LOOP('',(#527,#533,#534,#540));+#527=ORIENTED_EDGE('',*,*,#528,.F.);+#528=EDGE_CURVE('',#202,#529,#531,.T.);+#529=VERTEX_POINT('',#530);+#530=CARTESIAN_POINT('',(4.05,0.19,1.1));+#531=LINE('',#532,#27);+#532=CARTESIAN_POINT('',(3.6,0.19,1.1));+#533=ORIENTED_EDGE('',*,*,#201,.T.);+#534=ORIENTED_EDGE('',*,*,#535,.T.);+#535=EDGE_CURVE('',#198,#536,#538,.T.);+#536=VERTEX_POINT('',#537);+#537=CARTESIAN_POINT('',(4.05,-0.19,1.1));+#538=LINE('',#539,#27);+#539=CARTESIAN_POINT('',(3.6,-0.19,1.1));+#540=ORIENTED_EDGE('',*,*,#541,.F.);+#541=EDGE_CURVE('',#529,#536,#542,.T.);+#542=LINE('',#530,#58);+#543=PLANE('',#544);+#544=AXIS2_PLACEMENT_3D('',#532,#13,#28);+#545=ADVANCED_FACE('',(#546),#483,.F.);+#546=FACE_BOUND('',#547,.F.);+#547=EDGE_LOOP('',(#548,#554,#555,#561));+#548=ORIENTED_EDGE('',*,*,#549,.F.);+#549=EDGE_CURVE('',#198,#550,#552,.T.);+#550=VERTEX_POINT('',#551);+#551=CARTESIAN_POINT('',(3.75,-0.19,1.2));+#552=LINE('',#553,#355);+#553=CARTESIAN_POINT('',(3.75,-0.19,0.893069018303));+#554=ORIENTED_EDGE('',*,*,#197,.T.);+#555=ORIENTED_EDGE('',*,*,#556,.T.);+#556=EDGE_CURVE('',#194,#557,#559,.T.);+#557=VERTEX_POINT('',#558);+#558=CARTESIAN_POINT('',(3.75,-1.08,1.2));+#559=LINE('',#560,#355);+#560=CARTESIAN_POINT('',(3.75,-1.08,0.893069018303));+#561=ORIENTED_EDGE('',*,*,#562,.F.);+#562=EDGE_CURVE('',#550,#557,#280,.T.);+#563=ADVANCED_FACE('',(#564),#582,.F.);+#564=FACE_BOUND('',#565,.F.);+#565=EDGE_LOOP('',(#566,#572,#573,#579));+#566=ORIENTED_EDGE('',*,*,#567,.F.);+#567=EDGE_CURVE('',#194,#568,#570,.T.);+#568=VERTEX_POINT('',#569);+#569=CARTESIAN_POINT('',(4.05,-1.08,1.1));+#570=LINE('',#571,#27);+#571=CARTESIAN_POINT('',(3.6,-1.08,1.1));+#572=ORIENTED_EDGE('',*,*,#193,.T.);+#573=ORIENTED_EDGE('',*,*,#574,.T.);+#574=EDGE_CURVE('',#189,#575,#577,.T.);+#575=VERTEX_POINT('',#576);+#576=CARTESIAN_POINT('',(4.05,-1.46,1.1));+#577=LINE('',#578,#27);+#578=CARTESIAN_POINT('',(3.6,-1.46,1.1));+#579=ORIENTED_EDGE('',*,*,#580,.F.);+#580=EDGE_CURVE('',#568,#575,#581,.T.);+#581=LINE('',#569,#58);+#582=PLANE('',#583);+#583=AXIS2_PLACEMENT_3D('',#571,#13,#28);+#584=ADVANCED_FACE('',(#585),#483,.F.);+#585=FACE_BOUND('',#586,.F.);+#586=EDGE_LOOP('',(#587,#593,#594,#599));+#587=ORIENTED_EDGE('',*,*,#588,.F.);+#588=EDGE_CURVE('',#189,#589,#591,.T.);+#589=VERTEX_POINT('',#590);+#590=CARTESIAN_POINT('',(3.75,-1.46,1.2));+#591=LINE('',#592,#355);+#592=CARTESIAN_POINT('',(3.75,-1.46,0.893069018303));+#593=ORIENTED_EDGE('',*,*,#188,.T.);+#594=ORIENTED_EDGE('',*,*,#595,.T.);+#595=EDGE_CURVE('',#184,#596,#598,.T.);+#596=VERTEX_POINT('',#597);+#597=CARTESIAN_POINT('',(3.75,-1.745,1.2));+#598=B_SPLINE_CURVE_WITH_KNOTS('',1,(#185,#597),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#599=ORIENTED_EDGE('',*,*,#600,.F.);+#600=EDGE_CURVE('',#589,#596,#280,.T.);+#601=ADVANCED_FACE('',(#602),#614,.F.);+#602=FACE_BOUND('',#603,.F.);+#603=EDGE_LOOP('',(#604,#605,#606,#611));+#604=ORIENTED_EDGE('',*,*,#221,.T.);+#605=ORIENTED_EDGE('',*,*,#345,.T.);+#606=ORIENTED_EDGE('',*,*,#607,.F.);+#607=EDGE_CURVE('',#608,#346,#610,.T.);+#608=VERTEX_POINT('',#609);+#609=CARTESIAN_POINT('',(-3.575,-1.92,1.2));+#610=LINE('',#609,#79);+#611=ORIENTED_EDGE('',*,*,#612,.F.);+#612=EDGE_CURVE('',#222,#608,#613,.T.);+#613=B_SPLINE_CURVE_WITH_KNOTS('',1,(#223,#609),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#614=PLANE('',#615);+#615=AXIS2_PLACEMENT_3D('',#609,#92,#80);+#616=ADVANCED_FACE('',(#617),#629,.F.);+#617=FACE_BOUND('',#618,.F.);+#618=EDGE_LOOP('',(#619,#620,#625,#628));+#619=ORIENTED_EDGE('',*,*,#238,.T.);+#620=ORIENTED_EDGE('',*,*,#621,.T.);+#621=EDGE_CURVE('',#234,#622,#624,.T.);+#622=VERTEX_POINT('',#623);+#623=CARTESIAN_POINT('',(3.575,-1.92,1.2));+#624=B_SPLINE_CURVE_WITH_KNOTS('',1,(#235,#623),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#625=ORIENTED_EDGE('',*,*,#626,.F.);+#626=EDGE_CURVE('',#596,#622,#627,.T.);+#627=LINE('',#597,#65);+#628=ORIENTED_EDGE('',*,*,#595,.F.);+#629=PLANE('',#630);+#630=AXIS2_PLACEMENT_3D('',#597,#80,#66);+#631=ADVANCED_FACE('',(#632),#640,.F.);+#632=FACE_BOUND('',#633,.F.);+#633=EDGE_LOOP('',(#634,#635,#636,#639));+#634=ORIENTED_EDGE('',*,*,#247,.T.);+#635=ORIENTED_EDGE('',*,*,#612,.T.);+#636=ORIENTED_EDGE('',*,*,#637,.F.);+#637=EDGE_CURVE('',#622,#608,#638,.T.);+#638=LINE('',#623,#72);+#639=ORIENTED_EDGE('',*,*,#621,.F.);+#640=PLANE('',#641);+#641=AXIS2_PLACEMENT_3D('',#623,#87,#73);+#642=ADVANCED_FACE('',(#643),#663,.F.);+#643=FACE_BOUND('',#644,.F.);+#644=EDGE_LOOP('',(#645,#650,#654,#656,#657,#661));+#645=ORIENTED_EDGE('',*,*,#646,.F.);+#646=EDGE_CURVE('',#647,#436,#649,.T.);+#647=VERTEX_POINT('',#648);+#648=CARTESIAN_POINT('',(-4.05,1.08,1.2));+#649=LINE('',#648,#319);+#650=ORIENTED_EDGE('',*,*,#651,.T.);+#651=EDGE_CURVE('',#647,#652,#653,.T.);+#652=VERTEX_POINT('',#318);+#653=LINE('',#648,#381);+#654=ORIENTED_EDGE('',*,*,#655,.T.);+#655=EDGE_CURVE('',#652,#315,#317,.T.);+#656=ORIENTED_EDGE('',*,*,#314,.T.);+#657=ORIENTED_EDGE('',*,*,#658,.F.);+#658=EDGE_CURVE('',#659,#309,#311,.T.);+#659=VERTEX_POINT('',#660);+#660=CARTESIAN_POINT('',(-3.675,1.08,1.2));+#661=ORIENTED_EDGE('',*,*,#662,.F.);+#662=EDGE_CURVE('',#436,#659,#649,.T.);+#663=PLANE('',#664);+#664=AXIS2_PLACEMENT_3D('',#648,#95,#320);+#665=ADVANCED_FACE('',(#666),#702,.F.);+#666=FACE_BOUND('',#667,.F.);+#667=EDGE_LOOP('',(#668,#673,#677,#681,#685,#687,#688,#689,#694,#699));+#668=ORIENTED_EDGE('',*,*,#669,.T.);+#669=EDGE_CURVE('',#670,#671,#311,.T.);+#670=VERTEX_POINT('',#312);+#671=VERTEX_POINT('',#672);+#672=CARTESIAN_POINT('',(-3.675,-1.46,1.2));+#673=ORIENTED_EDGE('',*,*,#674,.T.);+#674=EDGE_CURVE('',#671,#675,#311,.T.);+#675=VERTEX_POINT('',#676);+#676=CARTESIAN_POINT('',(-3.675,-1.08,1.2));+#677=ORIENTED_EDGE('',*,*,#678,.T.);+#678=EDGE_CURVE('',#675,#679,#311,.T.);+#679=VERTEX_POINT('',#680);+#680=CARTESIAN_POINT('',(-3.675,-0.19,1.2));+#681=ORIENTED_EDGE('',*,*,#682,.T.);+#682=EDGE_CURVE('',#679,#683,#311,.T.);+#683=VERTEX_POINT('',#684);+#684=CARTESIAN_POINT('',(-3.675,0.19,1.2));+#685=ORIENTED_EDGE('',*,*,#686,.T.);+#686=EDGE_CURVE('',#683,#659,#311,.T.);+#687=ORIENTED_EDGE('',*,*,#658,.T.);+#688=ORIENTED_EDGE('',*,*,#308,.T.);+#689=ORIENTED_EDGE('',*,*,#690,.T.);+#690=EDGE_CURVE('',#304,#691,#693,.T.);+#691=VERTEX_POINT('',#692);+#692=CARTESIAN_POINT('',(-3.516615559675,1.628307779838,2.2));+#693=B_SPLINE_CURVE_WITH_KNOTS('',1,(#305,#692),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#694=ORIENTED_EDGE('',*,*,#695,.F.);+#695=EDGE_CURVE('',#696,#691,#698,.T.);+#696=VERTEX_POINT('',#697);+#697=CARTESIAN_POINT('',(-3.516615559675,-1.628307779838,2.2));+#698=LINE('',#697,#86);+#699=ORIENTED_EDGE('',*,*,#700,.F.);+#700=EDGE_CURVE('',#670,#696,#701,.T.);+#701=B_SPLINE_CURVE_WITH_KNOTS('',1,(#312,#697),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#702=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#312,#697),(#305,#692)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#703=ADVANCED_FACE('',(#704),#716,.F.);+#704=FACE_BOUND('',#705,.F.);+#705=EDGE_LOOP('',(#706,#707,#712,#715));+#706=ORIENTED_EDGE('',*,*,#303,.T.);+#707=ORIENTED_EDGE('',*,*,#708,.T.);+#708=EDGE_CURVE('',#299,#709,#711,.T.);+#709=VERTEX_POINT('',#710);+#710=CARTESIAN_POINT('',(-3.458307779838,1.686615559675,2.2));+#711=B_SPLINE_CURVE_WITH_KNOTS('',1,(#300,#710),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#712=ORIENTED_EDGE('',*,*,#713,.F.);+#713=EDGE_CURVE('',#691,#709,#714,.T.);+#714=LINE('',#692,#91);+#715=ORIENTED_EDGE('',*,*,#690,.F.);+#716=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#305,#692),(#300,#710)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#717=ADVANCED_FACE('',(#718),#730,.F.);+#718=FACE_BOUND('',#719,.F.);+#719=EDGE_LOOP('',(#720,#721,#726,#729));+#720=ORIENTED_EDGE('',*,*,#298,.T.);+#721=ORIENTED_EDGE('',*,*,#722,.T.);+#722=EDGE_CURVE('',#294,#723,#725,.T.);+#723=VERTEX_POINT('',#724);+#724=CARTESIAN_POINT('',(3.458307779838,1.686615559675,2.2));+#725=B_SPLINE_CURVE_WITH_KNOTS('',1,(#295,#724),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#726=ORIENTED_EDGE('',*,*,#727,.F.);+#727=EDGE_CURVE('',#709,#723,#728,.T.);+#728=LINE('',#710,#27);+#729=ORIENTED_EDGE('',*,*,#708,.F.);+#730=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#300,#710),(#295,#724)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.075),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#731=ADVANCED_FACE('',(#732),#744,.F.);+#732=FACE_BOUND('',#733,.F.);+#733=EDGE_LOOP('',(#734,#735,#740,#743));+#734=ORIENTED_EDGE('',*,*,#293,.T.);+#735=ORIENTED_EDGE('',*,*,#736,.T.);+#736=EDGE_CURVE('',#289,#737,#739,.T.);+#737=VERTEX_POINT('',#738);+#738=CARTESIAN_POINT('',(3.516615559675,1.628307779838,2.2));+#739=B_SPLINE_CURVE_WITH_KNOTS('',1,(#290,#738),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#740=ORIENTED_EDGE('',*,*,#741,.F.);+#741=EDGE_CURVE('',#723,#737,#742,.T.);+#742=LINE('',#724,#51);+#743=ORIENTED_EDGE('',*,*,#722,.F.);+#744=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#295,#724),(#290,#738)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#745=ADVANCED_FACE('',(#746),#782,.F.);+#746=FACE_BOUND('',#747,.F.);+#747=EDGE_LOOP('',(#748,#749,#753,#757,#761,#765,#769,#773,#778,#781));+#748=ORIENTED_EDGE('',*,*,#288,.T.);+#749=ORIENTED_EDGE('',*,*,#750,.T.);+#750=EDGE_CURVE('',#283,#751,#291,.T.);+#751=VERTEX_POINT('',#752);+#752=CARTESIAN_POINT('',(3.675,1.08,1.2));+#753=ORIENTED_EDGE('',*,*,#754,.T.);+#754=EDGE_CURVE('',#751,#755,#291,.T.);+#755=VERTEX_POINT('',#756);+#756=CARTESIAN_POINT('',(3.675,0.19,1.2));+#757=ORIENTED_EDGE('',*,*,#758,.T.);+#758=EDGE_CURVE('',#755,#759,#291,.T.);+#759=VERTEX_POINT('',#760);+#760=CARTESIAN_POINT('',(3.675,-0.19,1.2));+#761=ORIENTED_EDGE('',*,*,#762,.T.);+#762=EDGE_CURVE('',#759,#763,#291,.T.);+#763=VERTEX_POINT('',#764);+#764=CARTESIAN_POINT('',(3.675,-1.08,1.2));+#765=ORIENTED_EDGE('',*,*,#766,.T.);+#766=EDGE_CURVE('',#763,#767,#291,.T.);+#767=VERTEX_POINT('',#768);+#768=CARTESIAN_POINT('',(3.675,-1.46,1.2));+#769=ORIENTED_EDGE('',*,*,#770,.T.);+#770=EDGE_CURVE('',#767,#771,#291,.T.);+#771=VERTEX_POINT('',#772);+#772=CARTESIAN_POINT('',(3.675,-1.7075,1.2));+#773=ORIENTED_EDGE('',*,*,#774,.T.);+#774=EDGE_CURVE('',#771,#775,#777,.T.);+#775=VERTEX_POINT('',#776);+#776=CARTESIAN_POINT('',(3.516615559675,-1.628307779838,2.2));+#777=B_SPLINE_CURVE_WITH_KNOTS('',1,(#772,#776),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#778=ORIENTED_EDGE('',*,*,#779,.F.);+#779=EDGE_CURVE('',#737,#775,#780,.T.);+#780=LINE('',#738,#58);+#781=ORIENTED_EDGE('',*,*,#736,.F.);+#782=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#290,#738),(#772,#776)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.415),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#783=ADVANCED_FACE('',(#784),#801,.F.);+#784=FACE_BOUND('',#785,.F.);+#785=EDGE_LOOP('',(#786,#789,#794,#797,#799,#800));+#786=ORIENTED_EDGE('',*,*,#787,.F.);+#787=EDGE_CURVE('',#788,#278,#285,.T.);+#788=VERTEX_POINT('',#286);+#789=ORIENTED_EDGE('',*,*,#790,.T.);+#790=EDGE_CURVE('',#788,#791,#793,.T.);+#791=VERTEX_POINT('',#792);+#792=CARTESIAN_POINT('',(4.05,1.08,1.2));+#793=LINE('',#286,#58);+#794=ORIENTED_EDGE('',*,*,#795,.T.);+#795=EDGE_CURVE('',#791,#511,#796,.T.);+#796=LINE('',#792,#72);+#797=ORIENTED_EDGE('',*,*,#798,.T.);+#798=EDGE_CURVE('',#511,#751,#796,.T.);+#799=ORIENTED_EDGE('',*,*,#750,.F.);+#800=ORIENTED_EDGE('',*,*,#282,.F.);+#801=PLANE('',#802);+#802=AXIS2_PLACEMENT_3D('',#286,#95,#73);+#803=ADVANCED_FACE('',(#804),#325,.F.);+#804=FACE_BOUND('',#805,.F.);+#805=EDGE_LOOP('',(#806,#807,#811,#812,#817,#822,#825,#826,#830,#831,#832,#833));+#806=ORIENTED_EDGE('',*,*,#357,.T.);+#807=ORIENTED_EDGE('',*,*,#808,.T.);+#808=EDGE_CURVE('',#351,#671,#809,.T.);+#809=LINE('',#810,#319);+#810=CARTESIAN_POINT('',(-4.05,-1.46,1.2));+#811=ORIENTED_EDGE('',*,*,#669,.F.);+#812=ORIENTED_EDGE('',*,*,#813,.F.);+#813=EDGE_CURVE('',#814,#670,#816,.T.);+#814=VERTEX_POINT('',#815);+#815=CARTESIAN_POINT('',(-3.5375,-1.845,1.2));+#816=LINE('',#815,#79);+#817=ORIENTED_EDGE('',*,*,#818,.F.);+#818=EDGE_CURVE('',#819,#814,#821,.T.);+#819=VERTEX_POINT('',#820);+#820=CARTESIAN_POINT('',(3.5375,-1.845,1.2));+#821=LINE('',#820,#72);+#822=ORIENTED_EDGE('',*,*,#823,.F.);+#823=EDGE_CURVE('',#771,#819,#824,.T.);+#824=LINE('',#772,#65);+#825=ORIENTED_EDGE('',*,*,#770,.F.);+#826=ORIENTED_EDGE('',*,*,#827,.F.);+#827=EDGE_CURVE('',#589,#767,#828,.T.);+#828=LINE('',#829,#72);+#829=CARTESIAN_POINT('',(4.05,-1.46,1.2));+#830=ORIENTED_EDGE('',*,*,#600,.T.);+#831=ORIENTED_EDGE('',*,*,#626,.T.);+#832=ORIENTED_EDGE('',*,*,#637,.T.);+#833=ORIENTED_EDGE('',*,*,#607,.T.);+#834=ADVANCED_FACE('',(#835),#902,.F.);+#835=FACE_BOUND('',#836,.F.);+#836=EDGE_LOOP('',(#837,#838,#839,#848,#855,#864,#869,#874,#879,#887,#894,#900));+#837=ORIENTED_EDGE('',*,*,#350,.F.);+#838=ORIENTED_EDGE('',*,*,#364,.T.);+#839=ORIENTED_EDGE('',*,*,#840,.T.);+#840=EDGE_CURVE('',#365,#841,#843,.T.);+#841=VERTEX_POINT('',#842);+#842=CARTESIAN_POINT('',(-4.148480775301,-1.46,1.017364817767));+#843=CIRCLE('',#844,0.1);+#844=AXIS2_PLACEMENT_3D('',#845,#846,#847);+#845=CARTESIAN_POINT('',(-4.05,-1.46,1.));+#846=DIRECTION('',(-1.144237745222E-17,-1.,-4.379057701015E-47));+#847=DIRECTION('',(-8.881784197001E-15,1.016287272312E-31,1.));+#848=ORIENTED_EDGE('',*,*,#849,.T.);+#849=EDGE_CURVE('',#841,#850,#852,.T.);+#850=VERTEX_POINT('',#851);+#851=CARTESIAN_POINT('',(-4.294100033964,-1.46,0.165270364467));+#852=LINE('',#842,#853);+#853=VECTOR('',#854,1.);+#854=DIRECTION('',(-0.16845350961,1.927508640103E-18,-0.985709599781));+#855=ORIENTED_EDGE('',*,*,#856,.T.);+#856=EDGE_CURVE('',#850,#857,#859,.T.);+#857=VERTEX_POINT('',#858);+#858=CARTESIAN_POINT('',(-4.491061584567,-1.46,1.387778780781E-16));+#859=CIRCLE('',#860,0.2);+#860=AXIS2_PLACEMENT_3D('',#861,#862,#863);+#861=CARTESIAN_POINT('',(-4.491061584567,-1.46,0.2));+#862=DIRECTION('',(1.144237745222E-17,1.,-7.703719777549E-34));+#863=DIRECTION('',(0.984807753012,-1.126854202784E-17,-0.173648177667));+#864=ORIENTED_EDGE('',*,*,#865,.T.);+#865=EDGE_CURVE('',#857,#866,#868,.T.);+#866=VERTEX_POINT('',#867);+#867=CARTESIAN_POINT('',(-5.,-1.46,1.387778780781E-16));+#868=LINE('',#858,#369);+#869=ORIENTED_EDGE('',*,*,#870,.T.);+#870=EDGE_CURVE('',#866,#871,#873,.T.);+#871=VERTEX_POINT('',#872);+#872=CARTESIAN_POINT('',(-5.,-1.46,0.1));+#873=LINE('',#867,#355);+#874=ORIENTED_EDGE('',*,*,#875,.T.);+#875=EDGE_CURVE('',#871,#876,#878,.T.);+#876=VERTEX_POINT('',#877);+#877=CARTESIAN_POINT('',(-4.491061584567,-1.46,0.1));+#878=LINE('',#872,#319);+#879=ORIENTED_EDGE('',*,*,#880,.T.);+#880=EDGE_CURVE('',#876,#881,#883,.T.);+#881=VERTEX_POINT('',#882);+#882=CARTESIAN_POINT('',(-4.392580809266,-1.46,0.182635182233));+#883=CIRCLE('',#884,1.E-01);+#884=AXIS2_PLACEMENT_3D('',#861,#885,#886);+#885=DIRECTION('',(-1.144237745222E-17,-1.,4.379057701015E-47));+#886=DIRECTION('',(-8.881784197001E-15,1.016287272312E-31,-1.));+#887=ORIENTED_EDGE('',*,*,#888,.T.);+#888=EDGE_CURVE('',#881,#889,#891,.T.);+#889=VERTEX_POINT('',#890);+#890=CARTESIAN_POINT('',(-4.246961550602,-1.46,1.034729635533));+#891=LINE('',#882,#892);+#892=VECTOR('',#893,1.);+#893=DIRECTION('',(0.16845350961,-1.927508640103E-18,0.985709599781));+#894=ORIENTED_EDGE('',*,*,#895,.T.);+#895=EDGE_CURVE('',#889,#896,#897,.T.);+#896=VERTEX_POINT('',#810);+#897=CIRCLE('',#898,0.2);+#898=AXIS2_PLACEMENT_3D('',#845,#862,#899);+#899=DIRECTION('',(-0.984807753012,1.126854202784E-17,0.173648177667));+#900=ORIENTED_EDGE('',*,*,#901,.T.);+#901=EDGE_CURVE('',#896,#351,#809,.T.);+#902=PLANE('',#903);+#903=AXIS2_PLACEMENT_3D('',#904,#382,#13);+#904=CARTESIAN_POINT('',(-4.289433469638,-1.46,0.586138036607));+#905=ADVANCED_FACE('',(#906),#920,.F.);+#906=FACE_BOUND('',#907,.F.);+#907=EDGE_LOOP('',(#908,#909,#916,#919));+#908=ORIENTED_EDGE('',*,*,#379,.T.);+#909=ORIENTED_EDGE('',*,*,#910,.T.);+#910=EDGE_CURVE('',#374,#911,#913,.T.);+#911=VERTEX_POINT('',#912);+#912=CARTESIAN_POINT('',(-4.148480775301,-1.08,1.017364817767));+#913=CIRCLE('',#914,0.1);+#914=AXIS2_PLACEMENT_3D('',#915,#846,#847);+#915=CARTESIAN_POINT('',(-4.05,-1.08,1.));+#916=ORIENTED_EDGE('',*,*,#917,.F.);+#917=EDGE_CURVE('',#841,#911,#918,.T.);+#918=LINE('',#842,#381);+#919=ORIENTED_EDGE('',*,*,#840,.F.);+#920=CYLINDRICAL_SURFACE('',#921,0.1);+#921=AXIS2_PLACEMENT_3D('',#845,#922,#847);+#922=DIRECTION('',(-1.144237745222E-17,-1.,0.));+#923=ADVANCED_FACE('',(#924),#973,.T.);+#924=FACE_BOUND('',#925,.T.);+#925=EDGE_LOOP('',(#388,#372,#909,#926,#931,#938,#943,#948,#953,#959,#964,#970));+#926=ORIENTED_EDGE('',*,*,#927,.T.);+#927=EDGE_CURVE('',#911,#928,#930,.T.);+#928=VERTEX_POINT('',#929);+#929=CARTESIAN_POINT('',(-4.294100033964,-1.08,0.165270364467));+#930=LINE('',#912,#853);+#931=ORIENTED_EDGE('',*,*,#932,.T.);+#932=EDGE_CURVE('',#928,#933,#935,.T.);+#933=VERTEX_POINT('',#934);+#934=CARTESIAN_POINT('',(-4.491061584567,-1.08,1.387778780781E-16));+#935=CIRCLE('',#936,0.2);+#936=AXIS2_PLACEMENT_3D('',#937,#862,#863);+#937=CARTESIAN_POINT('',(-4.491061584567,-1.08,0.2));+#938=ORIENTED_EDGE('',*,*,#939,.T.);+#939=EDGE_CURVE('',#933,#940,#942,.T.);+#940=VERTEX_POINT('',#941);+#941=CARTESIAN_POINT('',(-5.,-1.08,1.387778780781E-16));+#942=LINE('',#934,#369);+#943=ORIENTED_EDGE('',*,*,#944,.T.);+#944=EDGE_CURVE('',#940,#945,#947,.T.);+#945=VERTEX_POINT('',#946);+#946=CARTESIAN_POINT('',(-5.,-1.08,0.1));+#947=LINE('',#941,#355);+#948=ORIENTED_EDGE('',*,*,#949,.T.);+#949=EDGE_CURVE('',#945,#950,#952,.T.);+#950=VERTEX_POINT('',#951);+#951=CARTESIAN_POINT('',(-4.491061584567,-1.08,0.1));+#952=LINE('',#946,#319);+#953=ORIENTED_EDGE('',*,*,#954,.T.);+#954=EDGE_CURVE('',#950,#955,#957,.T.);+#955=VERTEX_POINT('',#956);+#956=CARTESIAN_POINT('',(-4.392580809266,-1.08,0.182635182233));+#957=CIRCLE('',#958,1.E-01);+#958=AXIS2_PLACEMENT_3D('',#937,#885,#886);+#959=ORIENTED_EDGE('',*,*,#960,.T.);+#960=EDGE_CURVE('',#955,#961,#963,.T.);+#961=VERTEX_POINT('',#962);+#962=CARTESIAN_POINT('',(-4.246961550602,-1.08,1.034729635533));+#963=LINE('',#956,#892);+#964=ORIENTED_EDGE('',*,*,#965,.T.);+#965=EDGE_CURVE('',#961,#966,#968,.T.);+#966=VERTEX_POINT('',#967);+#967=CARTESIAN_POINT('',(-4.05,-1.08,1.2));+#968=CIRCLE('',#969,0.2);+#969=AXIS2_PLACEMENT_3D('',#915,#862,#899);+#970=ORIENTED_EDGE('',*,*,#971,.T.);+#971=EDGE_CURVE('',#966,#390,#972,.T.);+#972=LINE('',#967,#319);+#973=PLANE('',#974);+#974=AXIS2_PLACEMENT_3D('',#975,#382,#13);+#975=CARTESIAN_POINT('',(-4.289433469638,-1.08,0.586138036607));+#976=ADVANCED_FACE('',(#977),#325,.F.);+#977=FACE_BOUND('',#978,.F.);+#978=EDGE_LOOP('',(#979,#980,#984,#985));+#979=ORIENTED_EDGE('',*,*,#402,.T.);+#980=ORIENTED_EDGE('',*,*,#981,.T.);+#981=EDGE_CURVE('',#397,#679,#982,.T.);+#982=LINE('',#983,#319);+#983=CARTESIAN_POINT('',(-4.05,-0.19,1.2));+#984=ORIENTED_EDGE('',*,*,#678,.F.);+#985=ORIENTED_EDGE('',*,*,#986,.F.);+#986=EDGE_CURVE('',#390,#675,#972,.T.);+#987=ADVANCED_FACE('',(#988),#1044,.F.);+#988=FACE_BOUND('',#989,.F.);+#989=EDGE_LOOP('',(#990,#991,#992,#999,#1004,#1011,#1016,#1021,#1026,#1032,#1037,#1042));+#990=ORIENTED_EDGE('',*,*,#396,.F.);+#991=ORIENTED_EDGE('',*,*,#407,.T.);+#992=ORIENTED_EDGE('',*,*,#993,.T.);+#993=EDGE_CURVE('',#408,#994,#996,.T.);+#994=VERTEX_POINT('',#995);+#995=CARTESIAN_POINT('',(-4.148480775301,-0.19,1.017364817767));+#996=CIRCLE('',#997,0.1);+#997=AXIS2_PLACEMENT_3D('',#998,#846,#847);+#998=CARTESIAN_POINT('',(-4.05,-0.19,1.));+#999=ORIENTED_EDGE('',*,*,#1000,.T.);+#1000=EDGE_CURVE('',#994,#1001,#1003,.T.);+#1001=VERTEX_POINT('',#1002);+#1002=CARTESIAN_POINT('',(-4.294100033964,-0.19,0.165270364467));+#1003=LINE('',#995,#853);+#1004=ORIENTED_EDGE('',*,*,#1005,.T.);+#1005=EDGE_CURVE('',#1001,#1006,#1008,.T.);+#1006=VERTEX_POINT('',#1007);+#1007=CARTESIAN_POINT('',(-4.491061584567,-0.19,1.387778780781E-16));+#1008=CIRCLE('',#1009,0.2);+#1009=AXIS2_PLACEMENT_3D('',#1010,#862,#863);+#1010=CARTESIAN_POINT('',(-4.491061584567,-0.19,0.2));+#1011=ORIENTED_EDGE('',*,*,#1012,.T.);+#1012=EDGE_CURVE('',#1006,#1013,#1015,.T.);+#1013=VERTEX_POINT('',#1014);+#1014=CARTESIAN_POINT('',(-5.,-0.19,1.387778780781E-16));+#1015=LINE('',#1007,#369);+#1016=ORIENTED_EDGE('',*,*,#1017,.T.);+#1017=EDGE_CURVE('',#1013,#1018,#1020,.T.);+#1018=VERTEX_POINT('',#1019);+#1019=CARTESIAN_POINT('',(-5.,-0.19,0.1));+#1020=LINE('',#1014,#355);+#1021=ORIENTED_EDGE('',*,*,#1022,.T.);+#1022=EDGE_CURVE('',#1018,#1023,#1025,.T.);+#1023=VERTEX_POINT('',#1024);+#1024=CARTESIAN_POINT('',(-4.491061584567,-0.19,0.1));+#1025=LINE('',#1019,#319);+#1026=ORIENTED_EDGE('',*,*,#1027,.T.);+#1027=EDGE_CURVE('',#1023,#1028,#1030,.T.);+#1028=VERTEX_POINT('',#1029);+#1029=CARTESIAN_POINT('',(-4.392580809266,-0.19,0.182635182233));+#1030=CIRCLE('',#1031,1.E-01);+#1031=AXIS2_PLACEMENT_3D('',#1010,#885,#886);+#1032=ORIENTED_EDGE('',*,*,#1033,.T.);+#1033=EDGE_CURVE('',#1028,#1034,#1036,.T.);+#1034=VERTEX_POINT('',#1035);+#1035=CARTESIAN_POINT('',(-4.246961550602,-0.19,1.034729635533));+#1036=LINE('',#1029,#892);+#1037=ORIENTED_EDGE('',*,*,#1038,.T.);+#1038=EDGE_CURVE('',#1034,#1039,#1040,.T.);+#1039=VERTEX_POINT('',#983);+#1040=CIRCLE('',#1041,0.2);+#1041=AXIS2_PLACEMENT_3D('',#998,#862,#899);+#1042=ORIENTED_EDGE('',*,*,#1043,.T.);+#1043=EDGE_CURVE('',#1039,#397,#982,.T.);+#1044=PLANE('',#1045);+#1045=AXIS2_PLACEMENT_3D('',#1046,#382,#13);+#1046=CARTESIAN_POINT('',(-4.289433469638,-0.19,0.586138036607));+#1047=ADVANCED_FACE('',(#1048),#1062,.F.);+#1048=FACE_BOUND('',#1049,.F.);+#1049=EDGE_LOOP('',(#1050,#1051,#1058,#1061));+#1050=ORIENTED_EDGE('',*,*,#420,.T.);+#1051=ORIENTED_EDGE('',*,*,#1052,.T.);+#1052=EDGE_CURVE('',#415,#1053,#1055,.T.);+#1053=VERTEX_POINT('',#1054);+#1054=CARTESIAN_POINT('',(-4.148480775301,0.19,1.017364817767));+#1055=CIRCLE('',#1056,0.1);+#1056=AXIS2_PLACEMENT_3D('',#1057,#846,#847);+#1057=CARTESIAN_POINT('',(-4.05,0.19,1.));+#1058=ORIENTED_EDGE('',*,*,#1059,.F.);+#1059=EDGE_CURVE('',#994,#1053,#1060,.T.);+#1060=LINE('',#995,#381);+#1061=ORIENTED_EDGE('',*,*,#993,.F.);+#1062=CYLINDRICAL_SURFACE('',#1063,0.1);+#1063=AXIS2_PLACEMENT_3D('',#998,#922,#847);+#1064=ADVANCED_FACE('',(#1065),#1114,.T.);+#1065=FACE_BOUND('',#1066,.T.);+#1066=EDGE_LOOP('',(#427,#413,#1051,#1067,#1072,#1079,#1084,#1089,#1094,#1100,#1105,#1111));+#1067=ORIENTED_EDGE('',*,*,#1068,.T.);+#1068=EDGE_CURVE('',#1053,#1069,#1071,.T.);+#1069=VERTEX_POINT('',#1070);+#1070=CARTESIAN_POINT('',(-4.294100033964,0.19,0.165270364467));+#1071=LINE('',#1054,#853);+#1072=ORIENTED_EDGE('',*,*,#1073,.T.);+#1073=EDGE_CURVE('',#1069,#1074,#1076,.T.);+#1074=VERTEX_POINT('',#1075);+#1075=CARTESIAN_POINT('',(-4.491061584567,0.19,1.387778780781E-16));+#1076=CIRCLE('',#1077,0.2);+#1077=AXIS2_PLACEMENT_3D('',#1078,#862,#863);+#1078=CARTESIAN_POINT('',(-4.491061584567,0.19,0.2));+#1079=ORIENTED_EDGE('',*,*,#1080,.T.);+#1080=EDGE_CURVE('',#1074,#1081,#1083,.T.);+#1081=VERTEX_POINT('',#1082);+#1082=CARTESIAN_POINT('',(-5.,0.19,1.387778780781E-16));+#1083=LINE('',#1075,#369);+#1084=ORIENTED_EDGE('',*,*,#1085,.T.);+#1085=EDGE_CURVE('',#1081,#1086,#1088,.T.);+#1086=VERTEX_POINT('',#1087);+#1087=CARTESIAN_POINT('',(-5.,0.19,0.1));+#1088=LINE('',#1082,#355);+#1089=ORIENTED_EDGE('',*,*,#1090,.T.);+#1090=EDGE_CURVE('',#1086,#1091,#1093,.T.);+#1091=VERTEX_POINT('',#1092);+#1092=CARTESIAN_POINT('',(-4.491061584567,0.19,0.1));+#1093=LINE('',#1087,#319);+#1094=ORIENTED_EDGE('',*,*,#1095,.T.);+#1095=EDGE_CURVE('',#1091,#1096,#1098,.T.);+#1096=VERTEX_POINT('',#1097);+#1097=CARTESIAN_POINT('',(-4.392580809266,0.19,0.182635182233));+#1098=CIRCLE('',#1099,1.E-01);+#1099=AXIS2_PLACEMENT_3D('',#1078,#885,#886);+#1100=ORIENTED_EDGE('',*,*,#1101,.T.);+#1101=EDGE_CURVE('',#1096,#1102,#1104,.T.);+#1102=VERTEX_POINT('',#1103);+#1103=CARTESIAN_POINT('',(-4.246961550602,0.19,1.034729635533));+#1104=LINE('',#1097,#892);+#1105=ORIENTED_EDGE('',*,*,#1106,.T.);+#1106=EDGE_CURVE('',#1102,#1107,#1109,.T.);+#1107=VERTEX_POINT('',#1108);+#1108=CARTESIAN_POINT('',(-4.05,0.19,1.2));+#1109=CIRCLE('',#1110,0.2);+#1110=AXIS2_PLACEMENT_3D('',#1057,#862,#899);+#1111=ORIENTED_EDGE('',*,*,#1112,.T.);+#1112=EDGE_CURVE('',#1107,#429,#1113,.T.);+#1113=LINE('',#1108,#319);+#1114=PLANE('',#1115);+#1115=AXIS2_PLACEMENT_3D('',#1116,#382,#13);+#1116=CARTESIAN_POINT('',(-4.289433469638,0.19,0.586138036607));+#1117=ADVANCED_FACE('',(#1118),#325,.F.);+#1118=FACE_BOUND('',#1119,.F.);+#1119=EDGE_LOOP('',(#1120,#1121,#1122,#1123));+#1120=ORIENTED_EDGE('',*,*,#441,.T.);+#1121=ORIENTED_EDGE('',*,*,#662,.T.);+#1122=ORIENTED_EDGE('',*,*,#686,.F.);+#1123=ORIENTED_EDGE('',*,*,#1124,.F.);+#1124=EDGE_CURVE('',#429,#683,#1113,.T.);+#1125=ADVANCED_FACE('',(#1126),#1180,.F.);+#1126=FACE_BOUND('',#1127,.F.);+#1127=EDGE_LOOP('',(#1128,#1129,#1130,#1137,#1142,#1149,#1154,#1159,#1164,#1170,#1175,#1179));+#1128=ORIENTED_EDGE('',*,*,#435,.F.);+#1129=ORIENTED_EDGE('',*,*,#446,.T.);+#1130=ORIENTED_EDGE('',*,*,#1131,.T.);+#1131=EDGE_CURVE('',#447,#1132,#1134,.T.);+#1132=VERTEX_POINT('',#1133);+#1133=CARTESIAN_POINT('',(-4.148480775301,1.08,1.017364817767));+#1134=CIRCLE('',#1135,0.1);+#1135=AXIS2_PLACEMENT_3D('',#1136,#846,#847);+#1136=CARTESIAN_POINT('',(-4.05,1.08,1.));+#1137=ORIENTED_EDGE('',*,*,#1138,.T.);+#1138=EDGE_CURVE('',#1132,#1139,#1141,.T.);+#1139=VERTEX_POINT('',#1140);+#1140=CARTESIAN_POINT('',(-4.294100033964,1.08,0.165270364467));+#1141=LINE('',#1133,#853);+#1142=ORIENTED_EDGE('',*,*,#1143,.T.);+#1143=EDGE_CURVE('',#1139,#1144,#1146,.T.);+#1144=VERTEX_POINT('',#1145);+#1145=CARTESIAN_POINT('',(-4.491061584567,1.08,1.387778780781E-16));+#1146=CIRCLE('',#1147,0.2);+#1147=AXIS2_PLACEMENT_3D('',#1148,#862,#863);+#1148=CARTESIAN_POINT('',(-4.491061584567,1.08,0.2));+#1149=ORIENTED_EDGE('',*,*,#1150,.T.);+#1150=EDGE_CURVE('',#1144,#1151,#1153,.T.);+#1151=VERTEX_POINT('',#1152);+#1152=CARTESIAN_POINT('',(-5.,1.08,1.387778780781E-16));+#1153=LINE('',#1145,#369);+#1154=ORIENTED_EDGE('',*,*,#1155,.T.);+#1155=EDGE_CURVE('',#1151,#1156,#1158,.T.);+#1156=VERTEX_POINT('',#1157);+#1157=CARTESIAN_POINT('',(-5.,1.08,0.1));+#1158=LINE('',#1152,#355);+#1159=ORIENTED_EDGE('',*,*,#1160,.T.);+#1160=EDGE_CURVE('',#1156,#1161,#1163,.T.);+#1161=VERTEX_POINT('',#1162);+#1162=CARTESIAN_POINT('',(-4.491061584567,1.08,0.1));+#1163=LINE('',#1157,#319);+#1164=ORIENTED_EDGE('',*,*,#1165,.T.);+#1165=EDGE_CURVE('',#1161,#1166,#1168,.T.);+#1166=VERTEX_POINT('',#1167);+#1167=CARTESIAN_POINT('',(-4.392580809266,1.08,0.182635182233));+#1168=CIRCLE('',#1169,1.E-01);+#1169=AXIS2_PLACEMENT_3D('',#1148,#885,#886);+#1170=ORIENTED_EDGE('',*,*,#1171,.T.);+#1171=EDGE_CURVE('',#1166,#1172,#1174,.T.);+#1172=VERTEX_POINT('',#1173);+#1173=CARTESIAN_POINT('',(-4.246961550602,1.08,1.034729635533));+#1174=LINE('',#1167,#892);+#1175=ORIENTED_EDGE('',*,*,#1176,.T.);+#1176=EDGE_CURVE('',#1172,#647,#1177,.T.);+#1177=CIRCLE('',#1178,0.2);+#1178=AXIS2_PLACEMENT_3D('',#1136,#862,#899);+#1179=ORIENTED_EDGE('',*,*,#646,.T.);+#1180=PLANE('',#1181);+#1181=AXIS2_PLACEMENT_3D('',#1182,#382,#13);+#1182=CARTESIAN_POINT('',(-4.289433469638,1.08,0.586138036607));+#1183=ADVANCED_FACE('',(#1184),#1198,.F.);+#1184=FACE_BOUND('',#1185,.F.);+#1185=EDGE_LOOP('',(#1186,#1187,#1194,#1197));+#1186=ORIENTED_EDGE('',*,*,#459,.T.);+#1187=ORIENTED_EDGE('',*,*,#1188,.T.);+#1188=EDGE_CURVE('',#454,#1189,#1191,.T.);+#1189=VERTEX_POINT('',#1190);+#1190=CARTESIAN_POINT('',(-4.148480775301,1.46,1.017364817767));+#1191=CIRCLE('',#1192,0.1);+#1192=AXIS2_PLACEMENT_3D('',#1193,#846,#847);+#1193=CARTESIAN_POINT('',(-4.05,1.46,1.));+#1194=ORIENTED_EDGE('',*,*,#1195,.F.);+#1195=EDGE_CURVE('',#1132,#1189,#1196,.T.);+#1196=LINE('',#1133,#381);+#1197=ORIENTED_EDGE('',*,*,#1131,.F.);+#1198=CYLINDRICAL_SURFACE('',#1199,0.1);+#1199=AXIS2_PLACEMENT_3D('',#1136,#922,#847);+#1200=ADVANCED_FACE('',(#1201),#1245,.T.);+#1201=FACE_BOUND('',#1202,.T.);+#1202=EDGE_LOOP('',(#466,#452,#1187,#1203,#1208,#1215,#1220,#1225,#1230,#1236,#1241,#654));+#1203=ORIENTED_EDGE('',*,*,#1204,.T.);+#1204=EDGE_CURVE('',#1189,#1205,#1207,.T.);+#1205=VERTEX_POINT('',#1206);+#1206=CARTESIAN_POINT('',(-4.294100033964,1.46,0.165270364467));+#1207=LINE('',#1190,#853);+#1208=ORIENTED_EDGE('',*,*,#1209,.T.);+#1209=EDGE_CURVE('',#1205,#1210,#1212,.T.);+#1210=VERTEX_POINT('',#1211);+#1211=CARTESIAN_POINT('',(-4.491061584567,1.46,1.387778780781E-16));+#1212=CIRCLE('',#1213,0.2);+#1213=AXIS2_PLACEMENT_3D('',#1214,#862,#863);+#1214=CARTESIAN_POINT('',(-4.491061584567,1.46,0.2));+#1215=ORIENTED_EDGE('',*,*,#1216,.T.);+#1216=EDGE_CURVE('',#1210,#1217,#1219,.T.);+#1217=VERTEX_POINT('',#1218);+#1218=CARTESIAN_POINT('',(-5.,1.46,1.387778780781E-16));+#1219=LINE('',#1211,#369);+#1220=ORIENTED_EDGE('',*,*,#1221,.T.);+#1221=EDGE_CURVE('',#1217,#1222,#1224,.T.);+#1222=VERTEX_POINT('',#1223);+#1223=CARTESIAN_POINT('',(-5.,1.46,0.1));+#1224=LINE('',#1218,#355);+#1225=ORIENTED_EDGE('',*,*,#1226,.T.);+#1226=EDGE_CURVE('',#1222,#1227,#1229,.T.);+#1227=VERTEX_POINT('',#1228);+#1228=CARTESIAN_POINT('',(-4.491061584567,1.46,0.1));+#1229=LINE('',#1223,#319);+#1230=ORIENTED_EDGE('',*,*,#1231,.T.);+#1231=EDGE_CURVE('',#1227,#1232,#1234,.T.);+#1232=VERTEX_POINT('',#1233);+#1233=CARTESIAN_POINT('',(-4.392580809266,1.46,0.182635182233));+#1234=CIRCLE('',#1235,1.E-01);+#1235=AXIS2_PLACEMENT_3D('',#1214,#885,#886);+#1236=ORIENTED_EDGE('',*,*,#1237,.T.);+#1237=EDGE_CURVE('',#1232,#1238,#1240,.T.);+#1238=VERTEX_POINT('',#1239);+#1239=CARTESIAN_POINT('',(-4.246961550602,1.46,1.034729635533));+#1240=LINE('',#1233,#892);+#1241=ORIENTED_EDGE('',*,*,#1242,.T.);+#1242=EDGE_CURVE('',#1238,#652,#1243,.T.);+#1243=CIRCLE('',#1244,0.2);+#1244=AXIS2_PLACEMENT_3D('',#1193,#862,#899);+#1245=PLANE('',#1246);+#1246=AXIS2_PLACEMENT_3D('',#1247,#382,#13);+#1247=CARTESIAN_POINT('',(-4.289433469638,1.46,0.586138036607));+#1248=ADVANCED_FACE('',(#1249),#1311,.F.);+#1249=FACE_BOUND('',#1250,.F.);+#1250=EDGE_LOOP('',(#1251,#1252,#1253,#1261,#1268,#1276,#1281,#1286,#1291,#1298,#1305,#1310));+#1251=ORIENTED_EDGE('',*,*,#479,.F.);+#1252=ORIENTED_EDGE('',*,*,#489,.T.);+#1253=ORIENTED_EDGE('',*,*,#1254,.T.);+#1254=EDGE_CURVE('',#490,#1255,#1257,.T.);+#1255=VERTEX_POINT('',#1256);+#1256=CARTESIAN_POINT('',(4.148480775301,1.46,1.017364817767));+#1257=CIRCLE('',#1258,0.1);+#1258=AXIS2_PLACEMENT_3D('',#1259,#87,#1260);+#1259=CARTESIAN_POINT('',(4.05,1.46,1.));+#1260=DIRECTION('',(8.881784197001E-15,9.860761315263E-31,1.));+#1261=ORIENTED_EDGE('',*,*,#1262,.T.);+#1262=EDGE_CURVE('',#1255,#1263,#1265,.T.);+#1263=VERTEX_POINT('',#1264);+#1264=CARTESIAN_POINT('',(4.294100033964,1.46,0.165270364467));+#1265=LINE('',#1256,#1266);+#1266=VECTOR('',#1267,1.);+#1267=DIRECTION('',(0.16845350961,1.870209649474E-17,-0.985709599781));+#1268=ORIENTED_EDGE('',*,*,#1269,.T.);+#1269=EDGE_CURVE('',#1263,#1270,#1272,.T.);+#1270=VERTEX_POINT('',#1271);+#1271=CARTESIAN_POINT('',(4.491061584567,1.46,1.387778780781E-16));+#1272=CIRCLE('',#1273,0.2);+#1273=AXIS2_PLACEMENT_3D('',#1274,#59,#1275);+#1274=CARTESIAN_POINT('',(4.491061584567,1.46,0.2));+#1275=DIRECTION('',(-0.984807753012,-1.093356242224E-16,-0.173648177667));+#1276=ORIENTED_EDGE('',*,*,#1277,.T.);+#1277=EDGE_CURVE('',#1270,#1278,#1280,.T.);+#1278=VERTEX_POINT('',#1279);+#1279=CARTESIAN_POINT('',(5.,1.46,1.387778780781E-16));+#1280=LINE('',#1271,#27);+#1281=ORIENTED_EDGE('',*,*,#1282,.T.);+#1282=EDGE_CURVE('',#1278,#1283,#1285,.T.);+#1283=VERTEX_POINT('',#1284);+#1284=CARTESIAN_POINT('',(5.,1.46,0.1));+#1285=LINE('',#1279,#355);+#1286=ORIENTED_EDGE('',*,*,#1287,.T.);+#1287=EDGE_CURVE('',#1283,#1288,#1290,.T.);+#1288=VERTEX_POINT('',#1289);+#1289=CARTESIAN_POINT('',(4.491061584567,1.46,0.1));+#1290=LINE('',#1284,#72);+#1291=ORIENTED_EDGE('',*,*,#1292,.T.);+#1292=EDGE_CURVE('',#1288,#1293,#1295,.T.);+#1293=VERTEX_POINT('',#1294);+#1294=CARTESIAN_POINT('',(4.392580809266,1.46,0.182635182233));+#1295=CIRCLE('',#1296,1.E-01);+#1296=AXIS2_PLACEMENT_3D('',#1274,#87,#1297);+#1297=DIRECTION('',(8.881784197001E-15,9.860761315263E-31,-1.));+#1298=ORIENTED_EDGE('',*,*,#1299,.T.);+#1299=EDGE_CURVE('',#1293,#1300,#1302,.T.);+#1300=VERTEX_POINT('',#1301);+#1301=CARTESIAN_POINT('',(4.246961550602,1.46,1.034729635533));+#1302=LINE('',#1294,#1303);+#1303=VECTOR('',#1304,1.);+#1304=DIRECTION('',(-0.16845350961,-1.870209649474E-17,0.985709599781));+#1305=ORIENTED_EDGE('',*,*,#1306,.T.);+#1306=EDGE_CURVE('',#1300,#788,#1307,.T.);+#1307=CIRCLE('',#1308,0.2);+#1308=AXIS2_PLACEMENT_3D('',#1259,#59,#1309);+#1309=DIRECTION('',(0.984807753012,1.093356242224E-16,0.173648177667));+#1310=ORIENTED_EDGE('',*,*,#787,.T.);+#1311=PLANE('',#1312);+#1312=AXIS2_PLACEMENT_3D('',#1313,#59,#13);+#1313=CARTESIAN_POINT('',(4.289433469638,1.46,0.586138036607));+#1314=ADVANCED_FACE('',(#1315),#1329,.F.);+#1315=FACE_BOUND('',#1316,.F.);+#1316=EDGE_LOOP('',(#1317,#1318,#1325,#1328));+#1317=ORIENTED_EDGE('',*,*,#502,.T.);+#1318=ORIENTED_EDGE('',*,*,#1319,.T.);+#1319=EDGE_CURVE('',#497,#1320,#1322,.T.);+#1320=VERTEX_POINT('',#1321);+#1321=CARTESIAN_POINT('',(4.148480775301,1.08,1.017364817767));+#1322=CIRCLE('',#1323,0.1);+#1323=AXIS2_PLACEMENT_3D('',#1324,#87,#1260);+#1324=CARTESIAN_POINT('',(4.05,1.08,1.));+#1325=ORIENTED_EDGE('',*,*,#1326,.F.);+#1326=EDGE_CURVE('',#1255,#1320,#1327,.T.);+#1327=LINE('',#1256,#58);+#1328=ORIENTED_EDGE('',*,*,#1254,.F.);+#1329=CYLINDRICAL_SURFACE('',#1258,0.1);+#1330=ADVANCED_FACE('',(#1331),#1375,.T.);+#1331=FACE_BOUND('',#1332,.T.);+#1332=EDGE_LOOP('',(#509,#495,#1318,#1333,#1338,#1345,#1350,#1355,#1360,#1366,#1371,#794));+#1333=ORIENTED_EDGE('',*,*,#1334,.T.);+#1334=EDGE_CURVE('',#1320,#1335,#1337,.T.);+#1335=VERTEX_POINT('',#1336);+#1336=CARTESIAN_POINT('',(4.294100033964,1.08,0.165270364467));+#1337=LINE('',#1321,#1266);+#1338=ORIENTED_EDGE('',*,*,#1339,.T.);+#1339=EDGE_CURVE('',#1335,#1340,#1342,.T.);+#1340=VERTEX_POINT('',#1341);+#1341=CARTESIAN_POINT('',(4.491061584567,1.08,1.387778780781E-16));+#1342=CIRCLE('',#1343,0.2);+#1343=AXIS2_PLACEMENT_3D('',#1344,#59,#1275);+#1344=CARTESIAN_POINT('',(4.491061584567,1.08,0.2));+#1345=ORIENTED_EDGE('',*,*,#1346,.T.);+#1346=EDGE_CURVE('',#1340,#1347,#1349,.T.);+#1347=VERTEX_POINT('',#1348);+#1348=CARTESIAN_POINT('',(5.,1.08,1.387778780781E-16));+#1349=LINE('',#1341,#27);+#1350=ORIENTED_EDGE('',*,*,#1351,.T.);+#1351=EDGE_CURVE('',#1347,#1352,#1354,.T.);+#1352=VERTEX_POINT('',#1353);+#1353=CARTESIAN_POINT('',(5.,1.08,0.1));+#1354=LINE('',#1348,#355);+#1355=ORIENTED_EDGE('',*,*,#1356,.T.);+#1356=EDGE_CURVE('',#1352,#1357,#1359,.T.);+#1357=VERTEX_POINT('',#1358);+#1358=CARTESIAN_POINT('',(4.491061584567,1.08,0.1));+#1359=LINE('',#1353,#72);+#1360=ORIENTED_EDGE('',*,*,#1361,.T.);+#1361=EDGE_CURVE('',#1357,#1362,#1364,.T.);+#1362=VERTEX_POINT('',#1363);+#1363=CARTESIAN_POINT('',(4.392580809266,1.08,0.182635182233));+#1364=CIRCLE('',#1365,1.E-01);+#1365=AXIS2_PLACEMENT_3D('',#1344,#87,#1297);+#1366=ORIENTED_EDGE('',*,*,#1367,.T.);+#1367=EDGE_CURVE('',#1362,#1368,#1370,.T.);+#1368=VERTEX_POINT('',#1369);+#1369=CARTESIAN_POINT('',(4.246961550602,1.08,1.034729635533));+#1370=LINE('',#1363,#1303);+#1371=ORIENTED_EDGE('',*,*,#1372,.T.);+#1372=EDGE_CURVE('',#1368,#791,#1373,.T.);+#1373=CIRCLE('',#1374,0.2);+#1374=AXIS2_PLACEMENT_3D('',#1324,#59,#1309);+#1375=PLANE('',#1376);+#1376=AXIS2_PLACEMENT_3D('',#1377,#59,#13);+#1377=CARTESIAN_POINT('',(4.289433469638,1.08,0.586138036607));+#1378=ADVANCED_FACE('',(#1379),#325,.F.);+#1379=FACE_BOUND('',#1380,.F.);+#1380=EDGE_LOOP('',(#1381,#1382,#1383,#1387));+#1381=ORIENTED_EDGE('',*,*,#798,.F.);+#1382=ORIENTED_EDGE('',*,*,#523,.T.);+#1383=ORIENTED_EDGE('',*,*,#1384,.T.);+#1384=EDGE_CURVE('',#518,#755,#1385,.T.);+#1385=LINE('',#1386,#72);+#1386=CARTESIAN_POINT('',(4.05,0.19,1.2));+#1387=ORIENTED_EDGE('',*,*,#754,.F.);+#1388=ADVANCED_FACE('',(#1389),#1445,.F.);+#1389=FACE_BOUND('',#1390,.F.);+#1390=EDGE_LOOP('',(#1391,#1392,#1393,#1400,#1405,#1412,#1417,#1422,#1427,#1433,#1438,#1443));+#1391=ORIENTED_EDGE('',*,*,#517,.F.);+#1392=ORIENTED_EDGE('',*,*,#528,.T.);+#1393=ORIENTED_EDGE('',*,*,#1394,.T.);+#1394=EDGE_CURVE('',#529,#1395,#1397,.T.);+#1395=VERTEX_POINT('',#1396);+#1396=CARTESIAN_POINT('',(4.148480775301,0.19,1.017364817767));+#1397=CIRCLE('',#1398,0.1);+#1398=AXIS2_PLACEMENT_3D('',#1399,#87,#1260);+#1399=CARTESIAN_POINT('',(4.05,0.19,1.));+#1400=ORIENTED_EDGE('',*,*,#1401,.T.);+#1401=EDGE_CURVE('',#1395,#1402,#1404,.T.);+#1402=VERTEX_POINT('',#1403);+#1403=CARTESIAN_POINT('',(4.294100033964,0.19,0.165270364467));+#1404=LINE('',#1396,#1266);+#1405=ORIENTED_EDGE('',*,*,#1406,.T.);+#1406=EDGE_CURVE('',#1402,#1407,#1409,.T.);+#1407=VERTEX_POINT('',#1408);+#1408=CARTESIAN_POINT('',(4.491061584567,0.19,1.387778780781E-16));+#1409=CIRCLE('',#1410,0.2);+#1410=AXIS2_PLACEMENT_3D('',#1411,#59,#1275);+#1411=CARTESIAN_POINT('',(4.491061584567,0.19,0.2));+#1412=ORIENTED_EDGE('',*,*,#1413,.T.);+#1413=EDGE_CURVE('',#1407,#1414,#1416,.T.);+#1414=VERTEX_POINT('',#1415);+#1415=CARTESIAN_POINT('',(5.,0.19,1.387778780781E-16));+#1416=LINE('',#1408,#27);+#1417=ORIENTED_EDGE('',*,*,#1418,.T.);+#1418=EDGE_CURVE('',#1414,#1419,#1421,.T.);+#1419=VERTEX_POINT('',#1420);+#1420=CARTESIAN_POINT('',(5.,0.19,0.1));+#1421=LINE('',#1415,#355);+#1422=ORIENTED_EDGE('',*,*,#1423,.T.);+#1423=EDGE_CURVE('',#1419,#1424,#1426,.T.);+#1424=VERTEX_POINT('',#1425);+#1425=CARTESIAN_POINT('',(4.491061584567,0.19,0.1));+#1426=LINE('',#1420,#72);+#1427=ORIENTED_EDGE('',*,*,#1428,.T.);+#1428=EDGE_CURVE('',#1424,#1429,#1431,.T.);+#1429=VERTEX_POINT('',#1430);+#1430=CARTESIAN_POINT('',(4.392580809266,0.19,0.182635182233));+#1431=CIRCLE('',#1432,1.E-01);+#1432=AXIS2_PLACEMENT_3D('',#1411,#87,#1297);+#1433=ORIENTED_EDGE('',*,*,#1434,.T.);+#1434=EDGE_CURVE('',#1429,#1435,#1437,.T.);+#1435=VERTEX_POINT('',#1436);+#1436=CARTESIAN_POINT('',(4.246961550602,0.19,1.034729635533));+#1437=LINE('',#1430,#1303);+#1438=ORIENTED_EDGE('',*,*,#1439,.T.);+#1439=EDGE_CURVE('',#1435,#1440,#1441,.T.);+#1440=VERTEX_POINT('',#1386);+#1441=CIRCLE('',#1442,0.2);+#1442=AXIS2_PLACEMENT_3D('',#1399,#59,#1309);+#1443=ORIENTED_EDGE('',*,*,#1444,.T.);+#1444=EDGE_CURVE('',#1440,#518,#1385,.T.);+#1445=PLANE('',#1446);+#1446=AXIS2_PLACEMENT_3D('',#1447,#59,#13);+#1447=CARTESIAN_POINT('',(4.289433469638,0.19,0.586138036607));+#1448=ADVANCED_FACE('',(#1449),#1463,.F.);+#1449=FACE_BOUND('',#1450,.F.);+#1450=EDGE_LOOP('',(#1451,#1452,#1459,#1462));+#1451=ORIENTED_EDGE('',*,*,#541,.T.);+#1452=ORIENTED_EDGE('',*,*,#1453,.T.);+#1453=EDGE_CURVE('',#536,#1454,#1456,.T.);+#1454=VERTEX_POINT('',#1455);+#1455=CARTESIAN_POINT('',(4.148480775301,-0.19,1.017364817767));+#1456=CIRCLE('',#1457,0.1);+#1457=AXIS2_PLACEMENT_3D('',#1458,#87,#1260);+#1458=CARTESIAN_POINT('',(4.05,-0.19,1.));+#1459=ORIENTED_EDGE('',*,*,#1460,.F.);+#1460=EDGE_CURVE('',#1395,#1454,#1461,.T.);+#1461=LINE('',#1396,#58);+#1462=ORIENTED_EDGE('',*,*,#1394,.F.);+#1463=CYLINDRICAL_SURFACE('',#1398,0.1);+#1464=ADVANCED_FACE('',(#1465),#1514,.T.);+#1465=FACE_BOUND('',#1466,.T.);+#1466=EDGE_LOOP('',(#548,#534,#1452,#1467,#1472,#1479,#1484,#1489,#1494,#1500,#1505,#1511));+#1467=ORIENTED_EDGE('',*,*,#1468,.T.);+#1468=EDGE_CURVE('',#1454,#1469,#1471,.T.);+#1469=VERTEX_POINT('',#1470);+#1470=CARTESIAN_POINT('',(4.294100033964,-0.19,0.165270364467));+#1471=LINE('',#1455,#1266);+#1472=ORIENTED_EDGE('',*,*,#1473,.T.);+#1473=EDGE_CURVE('',#1469,#1474,#1476,.T.);+#1474=VERTEX_POINT('',#1475);+#1475=CARTESIAN_POINT('',(4.491061584567,-0.19,1.387778780781E-16));+#1476=CIRCLE('',#1477,0.2);+#1477=AXIS2_PLACEMENT_3D('',#1478,#59,#1275);+#1478=CARTESIAN_POINT('',(4.491061584567,-0.19,0.2));+#1479=ORIENTED_EDGE('',*,*,#1480,.T.);+#1480=EDGE_CURVE('',#1474,#1481,#1483,.T.);+#1481=VERTEX_POINT('',#1482);+#1482=CARTESIAN_POINT('',(5.,-0.19,1.387778780781E-16));+#1483=LINE('',#1475,#27);+#1484=ORIENTED_EDGE('',*,*,#1485,.T.);+#1485=EDGE_CURVE('',#1481,#1486,#1488,.T.);+#1486=VERTEX_POINT('',#1487);+#1487=CARTESIAN_POINT('',(5.,-0.19,0.1));+#1488=LINE('',#1482,#355);+#1489=ORIENTED_EDGE('',*,*,#1490,.T.);+#1490=EDGE_CURVE('',#1486,#1491,#1493,.T.);+#1491=VERTEX_POINT('',#1492);+#1492=CARTESIAN_POINT('',(4.491061584567,-0.19,0.1));+#1493=LINE('',#1487,#72);+#1494=ORIENTED_EDGE('',*,*,#1495,.T.);+#1495=EDGE_CURVE('',#1491,#1496,#1498,.T.);+#1496=VERTEX_POINT('',#1497);+#1497=CARTESIAN_POINT('',(4.392580809266,-0.19,0.182635182233));+#1498=CIRCLE('',#1499,1.E-01);+#1499=AXIS2_PLACEMENT_3D('',#1478,#87,#1297);+#1500=ORIENTED_EDGE('',*,*,#1501,.T.);+#1501=EDGE_CURVE('',#1496,#1502,#1504,.T.);+#1502=VERTEX_POINT('',#1503);+#1503=CARTESIAN_POINT('',(4.246961550602,-0.19,1.034729635533));+#1504=LINE('',#1497,#1303);+#1505=ORIENTED_EDGE('',*,*,#1506,.T.);+#1506=EDGE_CURVE('',#1502,#1507,#1509,.T.);+#1507=VERTEX_POINT('',#1508);+#1508=CARTESIAN_POINT('',(4.05,-0.19,1.2));+#1509=CIRCLE('',#1510,0.2);+#1510=AXIS2_PLACEMENT_3D('',#1458,#59,#1309);+#1511=ORIENTED_EDGE('',*,*,#1512,.T.);+#1512=EDGE_CURVE('',#1507,#550,#1513,.T.);+#1513=LINE('',#1508,#72);+#1514=PLANE('',#1515);+#1515=AXIS2_PLACEMENT_3D('',#1516,#59,#13);+#1516=CARTESIAN_POINT('',(4.289433469638,-0.19,0.586138036607));+#1517=ADVANCED_FACE('',(#1518),#325,.F.);+#1518=FACE_BOUND('',#1519,.F.);+#1519=EDGE_LOOP('',(#1520,#1522,#1523,#1527));+#1520=ORIENTED_EDGE('',*,*,#1521,.F.);+#1521=EDGE_CURVE('',#550,#759,#1513,.T.);+#1522=ORIENTED_EDGE('',*,*,#562,.T.);+#1523=ORIENTED_EDGE('',*,*,#1524,.T.);+#1524=EDGE_CURVE('',#557,#763,#1525,.T.);+#1525=LINE('',#1526,#72);+#1526=CARTESIAN_POINT('',(4.05,-1.08,1.2));+#1527=ORIENTED_EDGE('',*,*,#762,.F.);+#1528=ADVANCED_FACE('',(#1529),#1585,.F.);+#1529=FACE_BOUND('',#1530,.F.);+#1530=EDGE_LOOP('',(#1531,#1532,#1533,#1540,#1545,#1552,#1557,#1562,#1567,#1573,#1578,#1583));+#1531=ORIENTED_EDGE('',*,*,#556,.F.);+#1532=ORIENTED_EDGE('',*,*,#567,.T.);+#1533=ORIENTED_EDGE('',*,*,#1534,.T.);+#1534=EDGE_CURVE('',#568,#1535,#1537,.T.);+#1535=VERTEX_POINT('',#1536);+#1536=CARTESIAN_POINT('',(4.148480775301,-1.08,1.017364817767));+#1537=CIRCLE('',#1538,0.1);+#1538=AXIS2_PLACEMENT_3D('',#1539,#87,#1260);+#1539=CARTESIAN_POINT('',(4.05,-1.08,1.));+#1540=ORIENTED_EDGE('',*,*,#1541,.T.);+#1541=EDGE_CURVE('',#1535,#1542,#1544,.T.);+#1542=VERTEX_POINT('',#1543);+#1543=CARTESIAN_POINT('',(4.294100033964,-1.08,0.165270364467));+#1544=LINE('',#1536,#1266);+#1545=ORIENTED_EDGE('',*,*,#1546,.T.);+#1546=EDGE_CURVE('',#1542,#1547,#1549,.T.);+#1547=VERTEX_POINT('',#1548);+#1548=CARTESIAN_POINT('',(4.491061584567,-1.08,1.387778780781E-16));+#1549=CIRCLE('',#1550,0.2);+#1550=AXIS2_PLACEMENT_3D('',#1551,#59,#1275);+#1551=CARTESIAN_POINT('',(4.491061584567,-1.08,0.2));+#1552=ORIENTED_EDGE('',*,*,#1553,.T.);+#1553=EDGE_CURVE('',#1547,#1554,#1556,.T.);+#1554=VERTEX_POINT('',#1555);+#1555=CARTESIAN_POINT('',(5.,-1.08,1.387778780781E-16));+#1556=LINE('',#1548,#27);+#1557=ORIENTED_EDGE('',*,*,#1558,.T.);+#1558=EDGE_CURVE('',#1554,#1559,#1561,.T.);+#1559=VERTEX_POINT('',#1560);+#1560=CARTESIAN_POINT('',(5.,-1.08,0.1));+#1561=LINE('',#1555,#355);+#1562=ORIENTED_EDGE('',*,*,#1563,.T.);+#1563=EDGE_CURVE('',#1559,#1564,#1566,.T.);+#1564=VERTEX_POINT('',#1565);+#1565=CARTESIAN_POINT('',(4.491061584567,-1.08,0.1));+#1566=LINE('',#1560,#72);+#1567=ORIENTED_EDGE('',*,*,#1568,.T.);+#1568=EDGE_CURVE('',#1564,#1569,#1571,.T.);+#1569=VERTEX_POINT('',#1570);+#1570=CARTESIAN_POINT('',(4.392580809266,-1.08,0.182635182233));+#1571=CIRCLE('',#1572,1.E-01);+#1572=AXIS2_PLACEMENT_3D('',#1551,#87,#1297);+#1573=ORIENTED_EDGE('',*,*,#1574,.T.);+#1574=EDGE_CURVE('',#1569,#1575,#1577,.T.);+#1575=VERTEX_POINT('',#1576);+#1576=CARTESIAN_POINT('',(4.246961550602,-1.08,1.034729635533));+#1577=LINE('',#1570,#1303);+#1578=ORIENTED_EDGE('',*,*,#1579,.T.);+#1579=EDGE_CURVE('',#1575,#1580,#1581,.T.);+#1580=VERTEX_POINT('',#1526);+#1581=CIRCLE('',#1582,0.2);+#1582=AXIS2_PLACEMENT_3D('',#1539,#59,#1309);+#1583=ORIENTED_EDGE('',*,*,#1584,.T.);+#1584=EDGE_CURVE('',#1580,#557,#1525,.T.);+#1585=PLANE('',#1586);+#1586=AXIS2_PLACEMENT_3D('',#1587,#59,#13);+#1587=CARTESIAN_POINT('',(4.289433469638,-1.08,0.586138036607));+#1588=ADVANCED_FACE('',(#1589),#1603,.F.);+#1589=FACE_BOUND('',#1590,.F.);+#1590=EDGE_LOOP('',(#1591,#1592,#1599,#1602));+#1591=ORIENTED_EDGE('',*,*,#580,.T.);+#1592=ORIENTED_EDGE('',*,*,#1593,.T.);+#1593=EDGE_CURVE('',#575,#1594,#1596,.T.);+#1594=VERTEX_POINT('',#1595);+#1595=CARTESIAN_POINT('',(4.148480775301,-1.46,1.017364817767));+#1596=CIRCLE('',#1597,0.1);+#1597=AXIS2_PLACEMENT_3D('',#1598,#87,#1260);+#1598=CARTESIAN_POINT('',(4.05,-1.46,1.));+#1599=ORIENTED_EDGE('',*,*,#1600,.F.);+#1600=EDGE_CURVE('',#1535,#1594,#1601,.T.);+#1601=LINE('',#1536,#58);+#1602=ORIENTED_EDGE('',*,*,#1534,.F.);+#1603=CYLINDRICAL_SURFACE('',#1538,0.1);+#1604=ADVANCED_FACE('',(#1605),#1652,.T.);+#1605=FACE_BOUND('',#1606,.T.);+#1606=EDGE_LOOP('',(#587,#573,#1592,#1607,#1612,#1619,#1624,#1629,#1634,#1640,#1645,#1650));+#1607=ORIENTED_EDGE('',*,*,#1608,.T.);+#1608=EDGE_CURVE('',#1594,#1609,#1611,.T.);+#1609=VERTEX_POINT('',#1610);+#1610=CARTESIAN_POINT('',(4.294100033964,-1.46,0.165270364467));+#1611=LINE('',#1595,#1266);+#1612=ORIENTED_EDGE('',*,*,#1613,.T.);+#1613=EDGE_CURVE('',#1609,#1614,#1616,.T.);+#1614=VERTEX_POINT('',#1615);+#1615=CARTESIAN_POINT('',(4.491061584567,-1.46,1.387778780781E-16));+#1616=CIRCLE('',#1617,0.2);+#1617=AXIS2_PLACEMENT_3D('',#1618,#59,#1275);+#1618=CARTESIAN_POINT('',(4.491061584567,-1.46,0.2));+#1619=ORIENTED_EDGE('',*,*,#1620,.T.);+#1620=EDGE_CURVE('',#1614,#1621,#1623,.T.);+#1621=VERTEX_POINT('',#1622);+#1622=CARTESIAN_POINT('',(5.,-1.46,1.387778780781E-16));+#1623=LINE('',#1615,#27);+#1624=ORIENTED_EDGE('',*,*,#1625,.T.);+#1625=EDGE_CURVE('',#1621,#1626,#1628,.T.);+#1626=VERTEX_POINT('',#1627);+#1627=CARTESIAN_POINT('',(5.,-1.46,0.1));+#1628=LINE('',#1622,#355);+#1629=ORIENTED_EDGE('',*,*,#1630,.T.);+#1630=EDGE_CURVE('',#1626,#1631,#1633,.T.);+#1631=VERTEX_POINT('',#1632);+#1632=CARTESIAN_POINT('',(4.491061584567,-1.46,0.1));+#1633=LINE('',#1627,#72);+#1634=ORIENTED_EDGE('',*,*,#1635,.T.);+#1635=EDGE_CURVE('',#1631,#1636,#1638,.T.);+#1636=VERTEX_POINT('',#1637);+#1637=CARTESIAN_POINT('',(4.392580809266,-1.46,0.182635182233));+#1638=CIRCLE('',#1639,1.E-01);+#1639=AXIS2_PLACEMENT_3D('',#1618,#87,#1297);+#1640=ORIENTED_EDGE('',*,*,#1641,.T.);+#1641=EDGE_CURVE('',#1636,#1642,#1644,.T.);+#1642=VERTEX_POINT('',#1643);+#1643=CARTESIAN_POINT('',(4.246961550602,-1.46,1.034729635533));+#1644=LINE('',#1637,#1303);+#1645=ORIENTED_EDGE('',*,*,#1646,.T.);+#1646=EDGE_CURVE('',#1642,#1647,#1648,.T.);+#1647=VERTEX_POINT('',#829);+#1648=CIRCLE('',#1649,0.2);+#1649=AXIS2_PLACEMENT_3D('',#1598,#59,#1309);+#1650=ORIENTED_EDGE('',*,*,#1651,.T.);+#1651=EDGE_CURVE('',#1647,#589,#828,.T.);+#1652=PLANE('',#1653);+#1653=AXIS2_PLACEMENT_3D('',#1654,#59,#13);+#1654=CARTESIAN_POINT('',(4.289433469638,-1.46,0.586138036607));+#1655=ADVANCED_FACE('',(#1656),#1663,.T.);+#1656=FACE_BOUND('',#1657,.F.);+#1657=EDGE_LOOP('',(#1658,#1241,#1661,#1662));+#1658=ORIENTED_EDGE('',*,*,#1659,.T.);+#1659=EDGE_CURVE('',#1172,#1238,#1660,.T.);+#1660=LINE('',#1173,#381);+#1661=ORIENTED_EDGE('',*,*,#651,.F.);+#1662=ORIENTED_EDGE('',*,*,#1176,.F.);+#1663=CYLINDRICAL_SURFACE('',#1664,0.2);+#1664=AXIS2_PLACEMENT_3D('',#1136,#922,#899);+#1665=ADVANCED_FACE('',(#1666),#1675,.F.);+#1666=FACE_BOUND('',#1667,.F.);+#1667=EDGE_LOOP('',(#1668,#1669,#970,#1672,#1673,#1674));+#1668=ORIENTED_EDGE('',*,*,#901,.F.);+#1669=ORIENTED_EDGE('',*,*,#1670,.T.);+#1670=EDGE_CURVE('',#896,#966,#1671,.T.);+#1671=LINE('',#810,#381);+#1672=ORIENTED_EDGE('',*,*,#986,.T.);+#1673=ORIENTED_EDGE('',*,*,#674,.F.);+#1674=ORIENTED_EDGE('',*,*,#808,.F.);+#1675=PLANE('',#1676);+#1676=AXIS2_PLACEMENT_3D('',#810,#95,#320);+#1677=ADVANCED_FACE('',(#1678),#1687,.F.);+#1678=FACE_BOUND('',#1679,.F.);+#1679=EDGE_LOOP('',(#1680,#1681,#1111,#1684,#1685,#1686));+#1680=ORIENTED_EDGE('',*,*,#1043,.F.);+#1681=ORIENTED_EDGE('',*,*,#1682,.T.);+#1682=EDGE_CURVE('',#1039,#1107,#1683,.T.);+#1683=LINE('',#983,#381);+#1684=ORIENTED_EDGE('',*,*,#1124,.T.);+#1685=ORIENTED_EDGE('',*,*,#682,.F.);+#1686=ORIENTED_EDGE('',*,*,#981,.F.);+#1687=PLANE('',#1688);+#1688=AXIS2_PLACEMENT_3D('',#983,#95,#320);+#1689=ADVANCED_FACE('',(#1690,#1710),#1720,.F.);+#1690=FACE_BOUND('',#1691,.F.);+#1691=EDGE_LOOP('',(#1692,#1693,#1694,#1695,#1700,#1705,#1708,#1709));+#1692=ORIENTED_EDGE('',*,*,#727,.T.);+#1693=ORIENTED_EDGE('',*,*,#741,.T.);+#1694=ORIENTED_EDGE('',*,*,#779,.T.);+#1695=ORIENTED_EDGE('',*,*,#1696,.T.);+#1696=EDGE_CURVE('',#775,#1697,#1699,.T.);+#1697=VERTEX_POINT('',#1698);+#1698=CARTESIAN_POINT('',(3.458307779838,-1.686615559675,2.2));+#1699=LINE('',#776,#65);+#1700=ORIENTED_EDGE('',*,*,#1701,.T.);+#1701=EDGE_CURVE('',#1697,#1702,#1704,.T.);+#1702=VERTEX_POINT('',#1703);+#1703=CARTESIAN_POINT('',(-3.458307779838,-1.686615559675,2.2));+#1704=LINE('',#1698,#72);+#1705=ORIENTED_EDGE('',*,*,#1706,.T.);+#1706=EDGE_CURVE('',#1702,#696,#1707,.T.);+#1707=LINE('',#1703,#79);+#1708=ORIENTED_EDGE('',*,*,#695,.T.);+#1709=ORIENTED_EDGE('',*,*,#713,.T.);+#1710=FACE_BOUND('',#1711,.F.);+#1711=EDGE_LOOP('',(#1712));+#1712=ORIENTED_EDGE('',*,*,#1713,.F.);+#1713=EDGE_CURVE('',#1714,#1714,#1716,.T.);+#1714=VERTEX_POINT('',#1715);+#1715=CARTESIAN_POINT('',(-2.866615559675,0.736615559675,2.2));+#1716=CIRCLE('',#1717,0.3);+#1717=AXIS2_PLACEMENT_3D('',#1718,#1719,#59);+#1718=CARTESIAN_POINT('',(-2.866615559675,1.036615559675,2.2));+#1719=DIRECTION('',(0.,-0.,-1.));+#1720=PLANE('',#1721);+#1721=AXIS2_PLACEMENT_3D('',#710,#95,#1722);+#1722=DIRECTION('',(0.90318540656,-0.429250650993,0.));+#1723=ADVANCED_FACE('',(#1724),#1732,.F.);+#1724=FACE_BOUND('',#1725,.F.);+#1725=EDGE_LOOP('',(#1726,#1727,#1728,#1729));+#1726=ORIENTED_EDGE('',*,*,#813,.T.);+#1727=ORIENTED_EDGE('',*,*,#700,.T.);+#1728=ORIENTED_EDGE('',*,*,#1706,.F.);+#1729=ORIENTED_EDGE('',*,*,#1730,.F.);+#1730=EDGE_CURVE('',#814,#1702,#1731,.T.);+#1731=B_SPLINE_CURVE_WITH_KNOTS('',1,(#815,#1703),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1732=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#815,#1703),(#312,#697)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1733=ADVANCED_FACE('',(#1734),#1743,.F.);+#1734=FACE_BOUND('',#1735,.F.);+#1735=EDGE_LOOP('',(#1736,#1737,#1511,#1740,#1741,#1742));+#1736=ORIENTED_EDGE('',*,*,#1444,.F.);+#1737=ORIENTED_EDGE('',*,*,#1738,.T.);+#1738=EDGE_CURVE('',#1440,#1507,#1739,.T.);+#1739=LINE('',#1386,#58);+#1740=ORIENTED_EDGE('',*,*,#1521,.T.);+#1741=ORIENTED_EDGE('',*,*,#758,.F.);+#1742=ORIENTED_EDGE('',*,*,#1384,.F.);+#1743=PLANE('',#1744);+#1744=AXIS2_PLACEMENT_3D('',#1386,#95,#73);+#1745=ADVANCED_FACE('',(#1746),#1755,.F.);+#1746=FACE_BOUND('',#1747,.F.);+#1747=EDGE_LOOP('',(#1748,#1749,#1650,#1752,#1753,#1754));+#1748=ORIENTED_EDGE('',*,*,#1584,.F.);+#1749=ORIENTED_EDGE('',*,*,#1750,.T.);+#1750=EDGE_CURVE('',#1580,#1647,#1751,.T.);+#1751=LINE('',#1526,#58);+#1752=ORIENTED_EDGE('',*,*,#827,.T.);+#1753=ORIENTED_EDGE('',*,*,#766,.F.);+#1754=ORIENTED_EDGE('',*,*,#1524,.F.);+#1755=PLANE('',#1756);+#1756=AXIS2_PLACEMENT_3D('',#1526,#95,#73);+#1757=ADVANCED_FACE('',(#1758),#1766,.F.);+#1758=FACE_BOUND('',#1759,.F.);+#1759=EDGE_LOOP('',(#1760,#1761,#1764,#1765));+#1760=ORIENTED_EDGE('',*,*,#823,.T.);+#1761=ORIENTED_EDGE('',*,*,#1762,.T.);+#1762=EDGE_CURVE('',#819,#1697,#1763,.T.);+#1763=B_SPLINE_CURVE_WITH_KNOTS('',1,(#820,#1698),.UNSPECIFIED.,.F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1764=ORIENTED_EDGE('',*,*,#1696,.F.);+#1765=ORIENTED_EDGE('',*,*,#774,.F.);+#1766=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#772,#776),(#820,#1698)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1767=ADVANCED_FACE('',(#1768),#1775,.T.);+#1768=FACE_BOUND('',#1769,.F.);+#1769=EDGE_LOOP('',(#1770,#1371,#1773,#1774));+#1770=ORIENTED_EDGE('',*,*,#1771,.T.);+#1771=EDGE_CURVE('',#1300,#1368,#1772,.T.);+#1772=LINE('',#1301,#58);+#1773=ORIENTED_EDGE('',*,*,#790,.F.);+#1774=ORIENTED_EDGE('',*,*,#1306,.F.);+#1775=CYLINDRICAL_SURFACE('',#1776,0.2);+#1776=AXIS2_PLACEMENT_3D('',#1259,#87,#1309);+#1777=ADVANCED_FACE('',(#1778),#1784,.F.);+#1778=FACE_BOUND('',#1779,.F.);+#1779=EDGE_LOOP('',(#1780,#1781,#1782,#1783));+#1780=ORIENTED_EDGE('',*,*,#818,.T.);+#1781=ORIENTED_EDGE('',*,*,#1730,.T.);+#1782=ORIENTED_EDGE('',*,*,#1701,.F.);+#1783=ORIENTED_EDGE('',*,*,#1762,.F.);+#1784=B_SPLINE_SURFACE_WITH_KNOTS('',1,1,((#820,#1698),(#815,#1703)),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,7.075),(0.,1.),.PIECEWISE_BEZIER_KNOTS.);+#1785=ADVANCED_FACE('',(#1786),#1793,.T.);+#1786=FACE_BOUND('',#1787,.F.);+#1787=EDGE_LOOP('',(#1788,#964,#1791,#1792));+#1788=ORIENTED_EDGE('',*,*,#1789,.T.);+#1789=EDGE_CURVE('',#889,#961,#1790,.T.);+#1790=LINE('',#890,#381);+#1791=ORIENTED_EDGE('',*,*,#1670,.F.);+#1792=ORIENTED_EDGE('',*,*,#895,.F.);+#1793=CYLINDRICAL_SURFACE('',#1794,0.2);+#1794=AXIS2_PLACEMENT_3D('',#845,#922,#899);+#1795=ADVANCED_FACE('',(#1796),#1803,.F.);+#1796=FACE_BOUND('',#1797,.F.);+#1797=EDGE_LOOP('',(#1798,#959,#1801,#1802));+#1798=ORIENTED_EDGE('',*,*,#1799,.T.);+#1799=EDGE_CURVE('',#881,#955,#1800,.T.);+#1800=LINE('',#882,#381);+#1801=ORIENTED_EDGE('',*,*,#1789,.F.);+#1802=ORIENTED_EDGE('',*,*,#888,.F.);+#1803=PLANE('',#1804);+#1804=AXIS2_PLACEMENT_3D('',#882,#1805,#893);+#1805=DIRECTION('',(0.985709599781,-1.127886129897E-17,-0.16845350961));+#1806=ADVANCED_FACE('',(#1807),#1814,.F.);+#1807=FACE_BOUND('',#1808,.F.);+#1808=EDGE_LOOP('',(#1809,#953,#1812,#1813));+#1809=ORIENTED_EDGE('',*,*,#1810,.T.);+#1810=EDGE_CURVE('',#876,#950,#1811,.T.);+#1811=LINE('',#877,#381);+#1812=ORIENTED_EDGE('',*,*,#1799,.F.);+#1813=ORIENTED_EDGE('',*,*,#880,.F.);+#1814=CYLINDRICAL_SURFACE('',#1815,1.E-01);+#1815=AXIS2_PLACEMENT_3D('',#861,#922,#886);+#1816=ADVANCED_FACE('',(#1817),#1824,.F.);+#1817=FACE_BOUND('',#1818,.F.);+#1818=EDGE_LOOP('',(#1819,#948,#1822,#1823));+#1819=ORIENTED_EDGE('',*,*,#1820,.T.);+#1820=EDGE_CURVE('',#871,#945,#1821,.T.);+#1821=LINE('',#872,#381);+#1822=ORIENTED_EDGE('',*,*,#1810,.F.);+#1823=ORIENTED_EDGE('',*,*,#875,.F.);+#1824=PLANE('',#1825);+#1825=AXIS2_PLACEMENT_3D('',#872,#95,#320);+#1826=ADVANCED_FACE('',(#1827),#1834,.F.);+#1827=FACE_BOUND('',#1828,.F.);+#1828=EDGE_LOOP('',(#1829,#943,#1832,#1833));+#1829=ORIENTED_EDGE('',*,*,#1830,.T.);+#1830=EDGE_CURVE('',#866,#940,#1831,.T.);+#1831=LINE('',#867,#381);+#1832=ORIENTED_EDGE('',*,*,#1820,.F.);+#1833=ORIENTED_EDGE('',*,*,#870,.F.);+#1834=PLANE('',#1835);+#1835=AXIS2_PLACEMENT_3D('',#867,#320,#13);+#1836=ADVANCED_FACE('',(#1837),#1844,.F.);+#1837=FACE_BOUND('',#1838,.F.);+#1838=EDGE_LOOP('',(#1839,#938,#1842,#1843));+#1839=ORIENTED_EDGE('',*,*,#1840,.T.);+#1840=EDGE_CURVE('',#857,#933,#1841,.T.);+#1841=LINE('',#858,#381);+#1842=ORIENTED_EDGE('',*,*,#1830,.F.);+#1843=ORIENTED_EDGE('',*,*,#865,.F.);+#1844=PLANE('',#1845);+#1845=AXIS2_PLACEMENT_3D('',#858,#13,#370);+#1846=ADVANCED_FACE('',(#1847),#1854,.T.);+#1847=FACE_BOUND('',#1848,.F.);+#1848=EDGE_LOOP('',(#1849,#931,#1852,#1853));+#1849=ORIENTED_EDGE('',*,*,#1850,.T.);+#1850=EDGE_CURVE('',#850,#928,#1851,.T.);+#1851=LINE('',#851,#381);+#1852=ORIENTED_EDGE('',*,*,#1840,.F.);+#1853=ORIENTED_EDGE('',*,*,#856,.F.);+#1854=CYLINDRICAL_SURFACE('',#1855,0.2);+#1855=AXIS2_PLACEMENT_3D('',#861,#922,#863);+#1856=ADVANCED_FACE('',(#1857),#1862,.F.);+#1857=FACE_BOUND('',#1858,.F.);+#1858=EDGE_LOOP('',(#1859,#926,#1860,#1861));+#1859=ORIENTED_EDGE('',*,*,#917,.T.);+#1860=ORIENTED_EDGE('',*,*,#1850,.F.);+#1861=ORIENTED_EDGE('',*,*,#849,.F.);+#1862=PLANE('',#1863);+#1863=AXIS2_PLACEMENT_3D('',#842,#1864,#854);+#1864=DIRECTION('',(-0.985709599781,1.127886129897E-17,0.16845350961));+#1865=ADVANCED_FACE('',(#1866),#1873,.T.);+#1866=FACE_BOUND('',#1867,.F.);+#1867=EDGE_LOOP('',(#1868,#1105,#1871,#1872));+#1868=ORIENTED_EDGE('',*,*,#1869,.T.);+#1869=EDGE_CURVE('',#1034,#1102,#1870,.T.);+#1870=LINE('',#1035,#381);+#1871=ORIENTED_EDGE('',*,*,#1682,.F.);+#1872=ORIENTED_EDGE('',*,*,#1038,.F.);+#1873=CYLINDRICAL_SURFACE('',#1874,0.2);+#1874=AXIS2_PLACEMENT_3D('',#998,#922,#899);+#1875=ADVANCED_FACE('',(#1876),#1883,.F.);+#1876=FACE_BOUND('',#1877,.F.);+#1877=EDGE_LOOP('',(#1878,#1100,#1881,#1882));+#1878=ORIENTED_EDGE('',*,*,#1879,.T.);+#1879=EDGE_CURVE('',#1028,#1096,#1880,.T.);+#1880=LINE('',#1029,#381);+#1881=ORIENTED_EDGE('',*,*,#1869,.F.);+#1882=ORIENTED_EDGE('',*,*,#1033,.F.);+#1883=PLANE('',#1884);+#1884=AXIS2_PLACEMENT_3D('',#1029,#1805,#893);+#1885=ADVANCED_FACE('',(#1886),#1893,.F.);+#1886=FACE_BOUND('',#1887,.F.);+#1887=EDGE_LOOP('',(#1888,#1094,#1891,#1892));+#1888=ORIENTED_EDGE('',*,*,#1889,.T.);+#1889=EDGE_CURVE('',#1023,#1091,#1890,.T.);+#1890=LINE('',#1024,#381);+#1891=ORIENTED_EDGE('',*,*,#1879,.F.);+#1892=ORIENTED_EDGE('',*,*,#1027,.F.);+#1893=CYLINDRICAL_SURFACE('',#1894,1.E-01);+#1894=AXIS2_PLACEMENT_3D('',#1010,#922,#886);+#1895=ADVANCED_FACE('',(#1896),#1903,.F.);+#1896=FACE_BOUND('',#1897,.F.);+#1897=EDGE_LOOP('',(#1898,#1089,#1901,#1902));+#1898=ORIENTED_EDGE('',*,*,#1899,.T.);+#1899=EDGE_CURVE('',#1018,#1086,#1900,.T.);+#1900=LINE('',#1019,#381);+#1901=ORIENTED_EDGE('',*,*,#1889,.F.);+#1902=ORIENTED_EDGE('',*,*,#1022,.F.);+#1903=PLANE('',#1904);+#1904=AXIS2_PLACEMENT_3D('',#1019,#95,#320);+#1905=ADVANCED_FACE('',(#1906),#1913,.F.);+#1906=FACE_BOUND('',#1907,.F.);+#1907=EDGE_LOOP('',(#1908,#1084,#1911,#1912));+#1908=ORIENTED_EDGE('',*,*,#1909,.T.);+#1909=EDGE_CURVE('',#1013,#1081,#1910,.T.);+#1910=LINE('',#1014,#381);+#1911=ORIENTED_EDGE('',*,*,#1899,.F.);+#1912=ORIENTED_EDGE('',*,*,#1017,.F.);+#1913=PLANE('',#1914);+#1914=AXIS2_PLACEMENT_3D('',#1014,#320,#13);+#1915=ADVANCED_FACE('',(#1916),#1923,.F.);+#1916=FACE_BOUND('',#1917,.F.);+#1917=EDGE_LOOP('',(#1918,#1079,#1921,#1922));+#1918=ORIENTED_EDGE('',*,*,#1919,.T.);+#1919=EDGE_CURVE('',#1006,#1074,#1920,.T.);+#1920=LINE('',#1007,#381);+#1921=ORIENTED_EDGE('',*,*,#1909,.F.);+#1922=ORIENTED_EDGE('',*,*,#1012,.F.);+#1923=PLANE('',#1924);+#1924=AXIS2_PLACEMENT_3D('',#1007,#13,#370);+#1925=ADVANCED_FACE('',(#1926),#1933,.T.);+#1926=FACE_BOUND('',#1927,.F.);+#1927=EDGE_LOOP('',(#1928,#1072,#1931,#1932));+#1928=ORIENTED_EDGE('',*,*,#1929,.T.);+#1929=EDGE_CURVE('',#1001,#1069,#1930,.T.);+#1930=LINE('',#1002,#381);+#1931=ORIENTED_EDGE('',*,*,#1919,.F.);+#1932=ORIENTED_EDGE('',*,*,#1005,.F.);+#1933=CYLINDRICAL_SURFACE('',#1934,0.2);+#1934=AXIS2_PLACEMENT_3D('',#1010,#922,#863);+#1935=ADVANCED_FACE('',(#1936),#1941,.F.);+#1936=FACE_BOUND('',#1937,.F.);+#1937=EDGE_LOOP('',(#1938,#1067,#1939,#1940));+#1938=ORIENTED_EDGE('',*,*,#1059,.T.);+#1939=ORIENTED_EDGE('',*,*,#1929,.F.);+#1940=ORIENTED_EDGE('',*,*,#1000,.F.);+#1941=PLANE('',#1942);+#1942=AXIS2_PLACEMENT_3D('',#995,#1864,#854);+#1943=ADVANCED_FACE('',(#1944),#1951,.F.);+#1944=FACE_BOUND('',#1945,.F.);+#1945=EDGE_LOOP('',(#1946,#1236,#1949,#1950));+#1946=ORIENTED_EDGE('',*,*,#1947,.T.);+#1947=EDGE_CURVE('',#1166,#1232,#1948,.T.);+#1948=LINE('',#1167,#381);+#1949=ORIENTED_EDGE('',*,*,#1659,.F.);+#1950=ORIENTED_EDGE('',*,*,#1171,.F.);+#1951=PLANE('',#1952);+#1952=AXIS2_PLACEMENT_3D('',#1167,#1805,#893);+#1953=ADVANCED_FACE('',(#1954),#1961,.F.);+#1954=FACE_BOUND('',#1955,.F.);+#1955=EDGE_LOOP('',(#1956,#1230,#1959,#1960));+#1956=ORIENTED_EDGE('',*,*,#1957,.T.);+#1957=EDGE_CURVE('',#1161,#1227,#1958,.T.);+#1958=LINE('',#1162,#381);+#1959=ORIENTED_EDGE('',*,*,#1947,.F.);+#1960=ORIENTED_EDGE('',*,*,#1165,.F.);+#1961=CYLINDRICAL_SURFACE('',#1962,1.E-01);+#1962=AXIS2_PLACEMENT_3D('',#1148,#922,#886);+#1963=ADVANCED_FACE('',(#1964),#1971,.F.);+#1964=FACE_BOUND('',#1965,.F.);+#1965=EDGE_LOOP('',(#1966,#1225,#1969,#1970));+#1966=ORIENTED_EDGE('',*,*,#1967,.T.);+#1967=EDGE_CURVE('',#1156,#1222,#1968,.T.);+#1968=LINE('',#1157,#381);+#1969=ORIENTED_EDGE('',*,*,#1957,.F.);+#1970=ORIENTED_EDGE('',*,*,#1160,.F.);+#1971=PLANE('',#1972);+#1972=AXIS2_PLACEMENT_3D('',#1157,#95,#320);+#1973=ADVANCED_FACE('',(#1974),#1981,.F.);+#1974=FACE_BOUND('',#1975,.F.);+#1975=EDGE_LOOP('',(#1976,#1220,#1979,#1980));+#1976=ORIENTED_EDGE('',*,*,#1977,.T.);+#1977=EDGE_CURVE('',#1151,#1217,#1978,.T.);+#1978=LINE('',#1152,#381);+#1979=ORIENTED_EDGE('',*,*,#1967,.F.);+#1980=ORIENTED_EDGE('',*,*,#1155,.F.);+#1981=PLANE('',#1982);+#1982=AXIS2_PLACEMENT_3D('',#1152,#320,#13);+#1983=ADVANCED_FACE('',(#1984),#1991,.F.);+#1984=FACE_BOUND('',#1985,.F.);+#1985=EDGE_LOOP('',(#1986,#1215,#1989,#1990));+#1986=ORIENTED_EDGE('',*,*,#1987,.T.);+#1987=EDGE_CURVE('',#1144,#1210,#1988,.T.);+#1988=LINE('',#1145,#381);+#1989=ORIENTED_EDGE('',*,*,#1977,.F.);+#1990=ORIENTED_EDGE('',*,*,#1150,.F.);+#1991=PLANE('',#1992);+#1992=AXIS2_PLACEMENT_3D('',#1145,#13,#370);+#1993=ADVANCED_FACE('',(#1994),#2001,.T.);+#1994=FACE_BOUND('',#1995,.F.);+#1995=EDGE_LOOP('',(#1996,#1208,#1999,#2000));+#1996=ORIENTED_EDGE('',*,*,#1997,.T.);+#1997=EDGE_CURVE('',#1139,#1205,#1998,.T.);+#1998=LINE('',#1140,#381);+#1999=ORIENTED_EDGE('',*,*,#1987,.F.);+#2000=ORIENTED_EDGE('',*,*,#1143,.F.);+#2001=CYLINDRICAL_SURFACE('',#2002,0.2);+#2002=AXIS2_PLACEMENT_3D('',#1148,#922,#863);+#2003=ADVANCED_FACE('',(#2004),#2009,.F.);+#2004=FACE_BOUND('',#2005,.F.);+#2005=EDGE_LOOP('',(#2006,#1203,#2007,#2008));+#2006=ORIENTED_EDGE('',*,*,#1195,.T.);+#2007=ORIENTED_EDGE('',*,*,#1997,.F.);+#2008=ORIENTED_EDGE('',*,*,#1138,.F.);+#2009=PLANE('',#2010);+#2010=AXIS2_PLACEMENT_3D('',#1133,#1864,#854);+#2011=ADVANCED_FACE('',(#2012),#2019,.F.);+#2012=FACE_BOUND('',#2013,.F.);+#2013=EDGE_LOOP('',(#2014,#1366,#2017,#2018));+#2014=ORIENTED_EDGE('',*,*,#2015,.T.);+#2015=EDGE_CURVE('',#1293,#1362,#2016,.T.);+#2016=LINE('',#1294,#58);+#2017=ORIENTED_EDGE('',*,*,#1771,.F.);+#2018=ORIENTED_EDGE('',*,*,#1299,.F.);+#2019=PLANE('',#2020);+#2020=AXIS2_PLACEMENT_3D('',#1294,#2021,#1304);+#2021=DIRECTION('',(-0.985709599781,-1.094357493271E-16,-0.16845350961));+#2022=ADVANCED_FACE('',(#2023),#2030,.F.);+#2023=FACE_BOUND('',#2024,.F.);+#2024=EDGE_LOOP('',(#2025,#1360,#2028,#2029));+#2025=ORIENTED_EDGE('',*,*,#2026,.T.);+#2026=EDGE_CURVE('',#1288,#1357,#2027,.T.);+#2027=LINE('',#1289,#58);+#2028=ORIENTED_EDGE('',*,*,#2015,.F.);+#2029=ORIENTED_EDGE('',*,*,#1292,.F.);+#2030=CYLINDRICAL_SURFACE('',#1296,1.E-01);+#2031=ADVANCED_FACE('',(#2032),#2039,.F.);+#2032=FACE_BOUND('',#2033,.F.);+#2033=EDGE_LOOP('',(#2034,#1355,#2037,#2038));+#2034=ORIENTED_EDGE('',*,*,#2035,.T.);+#2035=EDGE_CURVE('',#1283,#1352,#2036,.T.);+#2036=LINE('',#1284,#58);+#2037=ORIENTED_EDGE('',*,*,#2026,.F.);+#2038=ORIENTED_EDGE('',*,*,#1287,.F.);+#2039=PLANE('',#2040);+#2040=AXIS2_PLACEMENT_3D('',#1284,#95,#73);+#2041=ADVANCED_FACE('',(#2042),#2049,.F.);+#2042=FACE_BOUND('',#2043,.F.);+#2043=EDGE_LOOP('',(#2044,#1350,#2047,#2048));+#2044=ORIENTED_EDGE('',*,*,#2045,.T.);+#2045=EDGE_CURVE('',#1278,#1347,#2046,.T.);+#2046=LINE('',#1279,#58);+#2047=ORIENTED_EDGE('',*,*,#2035,.F.);+#2048=ORIENTED_EDGE('',*,*,#1282,.F.);+#2049=PLANE('',#2050);+#2050=AXIS2_PLACEMENT_3D('',#1279,#73,#13);+#2051=ADVANCED_FACE('',(#2052),#2059,.F.);+#2052=FACE_BOUND('',#2053,.F.);+#2053=EDGE_LOOP('',(#2054,#1345,#2057,#2058));+#2054=ORIENTED_EDGE('',*,*,#2055,.T.);+#2055=EDGE_CURVE('',#1270,#1340,#2056,.T.);+#2056=LINE('',#1271,#58);+#2057=ORIENTED_EDGE('',*,*,#2045,.F.);+#2058=ORIENTED_EDGE('',*,*,#1277,.F.);+#2059=PLANE('',#2060);+#2060=AXIS2_PLACEMENT_3D('',#1271,#13,#28);+#2061=ADVANCED_FACE('',(#2062),#2069,.T.);+#2062=FACE_BOUND('',#2063,.F.);+#2063=EDGE_LOOP('',(#2064,#1338,#2067,#2068));+#2064=ORIENTED_EDGE('',*,*,#2065,.T.);+#2065=EDGE_CURVE('',#1263,#1335,#2066,.T.);+#2066=LINE('',#1264,#58);+#2067=ORIENTED_EDGE('',*,*,#2055,.F.);+#2068=ORIENTED_EDGE('',*,*,#1269,.F.);+#2069=CYLINDRICAL_SURFACE('',#2070,0.2);+#2070=AXIS2_PLACEMENT_3D('',#1274,#87,#1275);+#2071=ADVANCED_FACE('',(#2072),#2077,.F.);+#2072=FACE_BOUND('',#2073,.F.);+#2073=EDGE_LOOP('',(#2074,#1333,#2075,#2076));+#2074=ORIENTED_EDGE('',*,*,#1326,.T.);+#2075=ORIENTED_EDGE('',*,*,#2065,.F.);+#2076=ORIENTED_EDGE('',*,*,#1262,.F.);+#2077=PLANE('',#2078);+#2078=AXIS2_PLACEMENT_3D('',#1256,#2079,#1267);+#2079=DIRECTION('',(0.985709599781,1.094357493271E-16,0.16845350961));+#2080=ADVANCED_FACE('',(#2081),#2088,.T.);+#2081=FACE_BOUND('',#2082,.F.);+#2082=EDGE_LOOP('',(#2083,#1505,#2086,#2087));+#2083=ORIENTED_EDGE('',*,*,#2084,.T.);+#2084=EDGE_CURVE('',#1435,#1502,#2085,.T.);+#2085=LINE('',#1436,#58);+#2086=ORIENTED_EDGE('',*,*,#1738,.F.);+#2087=ORIENTED_EDGE('',*,*,#1439,.F.);+#2088=CYLINDRICAL_SURFACE('',#2089,0.2);+#2089=AXIS2_PLACEMENT_3D('',#1399,#87,#1309);+#2090=ADVANCED_FACE('',(#2091),#2098,.F.);+#2091=FACE_BOUND('',#2092,.F.);+#2092=EDGE_LOOP('',(#2093,#1500,#2096,#2097));+#2093=ORIENTED_EDGE('',*,*,#2094,.T.);+#2094=EDGE_CURVE('',#1429,#1496,#2095,.T.);+#2095=LINE('',#1430,#58);+#2096=ORIENTED_EDGE('',*,*,#2084,.F.);+#2097=ORIENTED_EDGE('',*,*,#1434,.F.);+#2098=PLANE('',#2099);+#2099=AXIS2_PLACEMENT_3D('',#1430,#2021,#1304);+#2100=ADVANCED_FACE('',(#2101),#2108,.F.);+#2101=FACE_BOUND('',#2102,.F.);+#2102=EDGE_LOOP('',(#2103,#1494,#2106,#2107));+#2103=ORIENTED_EDGE('',*,*,#2104,.T.);+#2104=EDGE_CURVE('',#1424,#1491,#2105,.T.);+#2105=LINE('',#1425,#58);+#2106=ORIENTED_EDGE('',*,*,#2094,.F.);+#2107=ORIENTED_EDGE('',*,*,#1428,.F.);+#2108=CYLINDRICAL_SURFACE('',#1432,1.E-01);+#2109=ADVANCED_FACE('',(#2110),#2117,.F.);+#2110=FACE_BOUND('',#2111,.F.);+#2111=EDGE_LOOP('',(#2112,#1489,#2115,#2116));+#2112=ORIENTED_EDGE('',*,*,#2113,.T.);+#2113=EDGE_CURVE('',#1419,#1486,#2114,.T.);+#2114=LINE('',#1420,#58);+#2115=ORIENTED_EDGE('',*,*,#2104,.F.);+#2116=ORIENTED_EDGE('',*,*,#1423,.F.);+#2117=PLANE('',#2118);+#2118=AXIS2_PLACEMENT_3D('',#1420,#95,#73);+#2119=ADVANCED_FACE('',(#2120),#2127,.F.);+#2120=FACE_BOUND('',#2121,.F.);+#2121=EDGE_LOOP('',(#2122,#1484,#2125,#2126));+#2122=ORIENTED_EDGE('',*,*,#2123,.T.);+#2123=EDGE_CURVE('',#1414,#1481,#2124,.T.);+#2124=LINE('',#1415,#58);+#2125=ORIENTED_EDGE('',*,*,#2113,.F.);+#2126=ORIENTED_EDGE('',*,*,#1418,.F.);+#2127=PLANE('',#2128);+#2128=AXIS2_PLACEMENT_3D('',#1415,#73,#13);+#2129=ADVANCED_FACE('',(#2130),#2137,.F.);+#2130=FACE_BOUND('',#2131,.F.);+#2131=EDGE_LOOP('',(#2132,#1479,#2135,#2136));+#2132=ORIENTED_EDGE('',*,*,#2133,.T.);+#2133=EDGE_CURVE('',#1407,#1474,#2134,.T.);+#2134=LINE('',#1408,#58);+#2135=ORIENTED_EDGE('',*,*,#2123,.F.);+#2136=ORIENTED_EDGE('',*,*,#1413,.F.);+#2137=PLANE('',#2138);+#2138=AXIS2_PLACEMENT_3D('',#1408,#13,#28);+#2139=ADVANCED_FACE('',(#2140),#2147,.T.);+#2140=FACE_BOUND('',#2141,.F.);+#2141=EDGE_LOOP('',(#2142,#1472,#2145,#2146));+#2142=ORIENTED_EDGE('',*,*,#2143,.T.);+#2143=EDGE_CURVE('',#1402,#1469,#2144,.T.);+#2144=LINE('',#1403,#58);+#2145=ORIENTED_EDGE('',*,*,#2133,.F.);+#2146=ORIENTED_EDGE('',*,*,#1406,.F.);+#2147=CYLINDRICAL_SURFACE('',#2148,0.2);+#2148=AXIS2_PLACEMENT_3D('',#1411,#87,#1275);+#2149=ADVANCED_FACE('',(#2150),#2155,.F.);+#2150=FACE_BOUND('',#2151,.F.);+#2151=EDGE_LOOP('',(#2152,#1467,#2153,#2154));+#2152=ORIENTED_EDGE('',*,*,#1460,.T.);+#2153=ORIENTED_EDGE('',*,*,#2143,.F.);+#2154=ORIENTED_EDGE('',*,*,#1401,.F.);+#2155=PLANE('',#2156);+#2156=AXIS2_PLACEMENT_3D('',#1396,#2079,#1267);+#2157=ADVANCED_FACE('',(#2158),#2165,.T.);+#2158=FACE_BOUND('',#2159,.F.);+#2159=EDGE_LOOP('',(#2160,#1645,#2163,#2164));+#2160=ORIENTED_EDGE('',*,*,#2161,.T.);+#2161=EDGE_CURVE('',#1575,#1642,#2162,.T.);+#2162=LINE('',#1576,#58);+#2163=ORIENTED_EDGE('',*,*,#1750,.F.);+#2164=ORIENTED_EDGE('',*,*,#1579,.F.);+#2165=CYLINDRICAL_SURFACE('',#2166,0.2);+#2166=AXIS2_PLACEMENT_3D('',#1539,#87,#1309);+#2167=ADVANCED_FACE('',(#2168),#2175,.F.);+#2168=FACE_BOUND('',#2169,.F.);+#2169=EDGE_LOOP('',(#2170,#1640,#2173,#2174));+#2170=ORIENTED_EDGE('',*,*,#2171,.T.);+#2171=EDGE_CURVE('',#1569,#1636,#2172,.T.);+#2172=LINE('',#1570,#58);+#2173=ORIENTED_EDGE('',*,*,#2161,.F.);+#2174=ORIENTED_EDGE('',*,*,#1574,.F.);+#2175=PLANE('',#2176);+#2176=AXIS2_PLACEMENT_3D('',#1570,#2021,#1304);+#2177=ADVANCED_FACE('',(#2178),#2185,.F.);+#2178=FACE_BOUND('',#2179,.F.);+#2179=EDGE_LOOP('',(#2180,#1634,#2183,#2184));+#2180=ORIENTED_EDGE('',*,*,#2181,.T.);+#2181=EDGE_CURVE('',#1564,#1631,#2182,.T.);+#2182=LINE('',#1565,#58);+#2183=ORIENTED_EDGE('',*,*,#2171,.F.);+#2184=ORIENTED_EDGE('',*,*,#1568,.F.);+#2185=CYLINDRICAL_SURFACE('',#1572,1.E-01);+#2186=ADVANCED_FACE('',(#2187),#2194,.F.);+#2187=FACE_BOUND('',#2188,.F.);+#2188=EDGE_LOOP('',(#2189,#1629,#2192,#2193));+#2189=ORIENTED_EDGE('',*,*,#2190,.T.);+#2190=EDGE_CURVE('',#1559,#1626,#2191,.T.);+#2191=LINE('',#1560,#58);+#2192=ORIENTED_EDGE('',*,*,#2181,.F.);+#2193=ORIENTED_EDGE('',*,*,#1563,.F.);+#2194=PLANE('',#2195);+#2195=AXIS2_PLACEMENT_3D('',#1560,#95,#73);+#2196=ADVANCED_FACE('',(#2197),#2204,.F.);+#2197=FACE_BOUND('',#2198,.F.);+#2198=EDGE_LOOP('',(#2199,#1624,#2202,#2203));+#2199=ORIENTED_EDGE('',*,*,#2200,.T.);+#2200=EDGE_CURVE('',#1554,#1621,#2201,.T.);+#2201=LINE('',#1555,#58);+#2202=ORIENTED_EDGE('',*,*,#2190,.F.);+#2203=ORIENTED_EDGE('',*,*,#1558,.F.);+#2204=PLANE('',#2205);+#2205=AXIS2_PLACEMENT_3D('',#1555,#73,#13);+#2206=ADVANCED_FACE('',(#2207),#2214,.F.);+#2207=FACE_BOUND('',#2208,.F.);+#2208=EDGE_LOOP('',(#2209,#1619,#2212,#2213));+#2209=ORIENTED_EDGE('',*,*,#2210,.T.);+#2210=EDGE_CURVE('',#1547,#1614,#2211,.T.);+#2211=LINE('',#1548,#58);+#2212=ORIENTED_EDGE('',*,*,#2200,.F.);+#2213=ORIENTED_EDGE('',*,*,#1553,.F.);+#2214=PLANE('',#2215);+#2215=AXIS2_PLACEMENT_3D('',#1548,#13,#28);+#2216=ADVANCED_FACE('',(#2217),#2224,.T.);+#2217=FACE_BOUND('',#2218,.F.);+#2218=EDGE_LOOP('',(#2219,#1612,#2222,#2223));+#2219=ORIENTED_EDGE('',*,*,#2220,.T.);+#2220=EDGE_CURVE('',#1542,#1609,#2221,.T.);+#2221=LINE('',#1543,#58);+#2222=ORIENTED_EDGE('',*,*,#2210,.F.);+#2223=ORIENTED_EDGE('',*,*,#1546,.F.);+#2224=CYLINDRICAL_SURFACE('',#2225,0.2);+#2225=AXIS2_PLACEMENT_3D('',#1551,#87,#1275);+#2226=ADVANCED_FACE('',(#2227),#2232,.F.);+#2227=FACE_BOUND('',#2228,.F.);+#2228=EDGE_LOOP('',(#2229,#1607,#2230,#2231));+#2229=ORIENTED_EDGE('',*,*,#1600,.T.);+#2230=ORIENTED_EDGE('',*,*,#2220,.F.);+#2231=ORIENTED_EDGE('',*,*,#1541,.F.);+#2232=PLANE('',#2233);+#2233=AXIS2_PLACEMENT_3D('',#1536,#2079,#1267);+#2234=ADVANCED_FACE('',(#2235),#2236,.F.);+#2235=FACE_BOUND('',#1711,.T.);+#2236=PLANE('',#2237);+#2237=AXIS2_PLACEMENT_3D('',#1718,#95,#59);+#2238=( GEOMETRIC_REPRESENTATION_CONTEXT(3) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2242)) GLOBAL_UNIT_ASSIGNED_CONTEXT((#2239,#2240,#2241)) REPRESENTATION_CONTEXT('Context #1','3D Context with UNIT and UNCERTAINTY') );+#2239=( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );+#2240=( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );+#2241=( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );+#2242=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-07),#2239,'distance_accuracy_value','confusion accuracy');+#2243=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7));+#2244=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#2245,#2255,#2256,#2257,#2258,#2259,#2260,#2261,#2262,#2263,#2264,#2265,#2266,#2267,#2268,#2277,#2278,#2279,#2280,#2281,#2282,#2283,#2284,#2285,#2286,#2287,#2288,#2289,#2290,#2291,#2292,#2293,#2294,#2295,#2296,#2297,#2298,#2299,#2300,#2301,#2302,#2303,#2304,#2305,#2306,#2307,#2308,#2309,#2310,#2311,#2312,#2313,#2314,#2315,#2316,#2317,#2318,#2319,#2320,#2321,#2322,#2323,#2324,#2325,#2326,#2327,#2328,#2329,#2330,#2331,#2332,#2333,#2334,#2335,#2336,#2337,#2338,#2339,#2340,#2341,#2342,#2343,#2344,#2345,#2346,#2347,#2348,#2349,#2350,#2351,#2352,#2353,#2354,#2355,#2356,#2357,#2358,#2359,#2360,#2361,#2362,#2363,#2364,#2365,#2366,#2367,#2368,#2369,#2370,#2371,#2372,#2373,#2374,#2375,#2376,#2377,#2378),#2238);+#2245=STYLED_ITEM('color',(#2246),#17);+#2246=PRESENTATION_STYLE_ASSIGNMENT((#2247,#2253));+#2247=SURFACE_STYLE_USAGE(.BOTH.,#2248);+#2248=SURFACE_SIDE_STYLE('',(#2249));+#2249=SURFACE_STYLE_FILL_AREA(#2250);+#2250=FILL_AREA_STYLE('',(#2251));+#2251=FILL_AREA_STYLE_COLOUR('',#2252);+#2252=COLOUR_RGB('',0.147999998088,0.145000001626,0.145000001626);+#2253=CURVE_STYLE('',#2254,POSITIVE_LENGTH_MEASURE(0.1),#2252);+#2254=DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');+#2255=STYLED_ITEM('color',(#2246),#43);+#2256=STYLED_ITEM('color',(#2246),#97);+#2257=STYLED_ITEM('color',(#2246),#110);+#2258=STYLED_ITEM('color',(#2246),#129);+#2259=STYLED_ITEM('color',(#2246),#142);+#2260=STYLED_ITEM('color',(#2246),#179);+#2261=STYLED_ITEM('color',(#2246),#216);+#2262=STYLED_ITEM('color',(#2246),#229);+#2263=STYLED_ITEM('color',(#2246),#242);+#2264=STYLED_ITEM('color',(#2246),#251);+#2265=STYLED_ITEM('color',(#2246),#266);+#2266=STYLED_ITEM('color',(#2246),#330);+#2267=STYLED_ITEM('color',(#2246),#341);+#2268=STYLED_ITEM('color',(#2269),#360);+#2269=PRESENTATION_STYLE_ASSIGNMENT((#2270,#2276));+#2270=SURFACE_STYLE_USAGE(.BOTH.,#2271);+#2271=SURFACE_SIDE_STYLE('',(#2272));+#2272=SURFACE_STYLE_FILL_AREA(#2273);+#2273=FILL_AREA_STYLE('',(#2274));+#2274=FILL_AREA_STYLE_COLOUR('',#2275);+#2275=COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244);+#2276=CURVE_STYLE('',#2254,POSITIVE_LENGTH_MEASURE(0.1),#2275);+#2277=STYLED_ITEM('color',(#2246),#385);+#2278=STYLED_ITEM('color',(#2269),#403);+#2279=STYLED_ITEM('color',(#2246),#424);+#2280=STYLED_ITEM('color',(#2269),#442);+#2281=STYLED_ITEM('color',(#2246),#463);+#2282=STYLED_ITEM('color',(#2246),#473);+#2283=STYLED_ITEM('color',(#2269),#485);+#2284=STYLED_ITEM('color',(#2246),#506);+#2285=STYLED_ITEM('color',(#2269),#524);+#2286=STYLED_ITEM('color',(#2246),#545);+#2287=STYLED_ITEM('color',(#2269),#563);+#2288=STYLED_ITEM('color',(#2246),#584);+#2289=STYLED_ITEM('color',(#2246),#601);+#2290=STYLED_ITEM('color',(#2246),#616);+#2291=STYLED_ITEM('color',(#2246),#631);+#2292=STYLED_ITEM('color',(#2269),#642);+#2293=STYLED_ITEM('color',(#2246),#665);+#2294=STYLED_ITEM('color',(#2246),#703);+#2295=STYLED_ITEM('color',(#2246),#717);+#2296=STYLED_ITEM('color',(#2246),#731);+#2297=STYLED_ITEM('color',(#2246),#745);+#2298=STYLED_ITEM('color',(#2269),#783);+#2299=STYLED_ITEM('color',(#2246),#803);+#2300=STYLED_ITEM('color',(#2269),#834);+#2301=STYLED_ITEM('color',(#2269),#905);+#2302=STYLED_ITEM('color',(#2269),#923);+#2303=STYLED_ITEM('color',(#2246),#976);+#2304=STYLED_ITEM('color',(#2269),#987);+#2305=STYLED_ITEM('color',(#2269),#1047);+#2306=STYLED_ITEM('color',(#2269),#1064);+#2307=STYLED_ITEM('color',(#2246),#1117);+#2308=STYLED_ITEM('color',(#2269),#1125);+#2309=STYLED_ITEM('color',(#2269),#1183);+#2310=STYLED_ITEM('color',(#2269),#1200);+#2311=STYLED_ITEM('color',(#2269),#1248);+#2312=STYLED_ITEM('color',(#2269),#1314);+#2313=STYLED_ITEM('color',(#2269),#1330);+#2314=STYLED_ITEM('color',(#2246),#1378);+#2315=STYLED_ITEM('color',(#2269),#1388);+#2316=STYLED_ITEM('color',(#2269),#1448);+#2317=STYLED_ITEM('color',(#2269),#1464);+#2318=STYLED_ITEM('color',(#2246),#1517);+#2319=STYLED_ITEM('color',(#2269),#1528);+#2320=STYLED_ITEM('color',(#2269),#1588);+#2321=STYLED_ITEM('color',(#2269),#1604);+#2322=STYLED_ITEM('color',(#2269),#1655);+#2323=STYLED_ITEM('color',(#2269),#1665);+#2324=STYLED_ITEM('color',(#2269),#1677);+#2325=STYLED_ITEM('color',(#2246),#1689);+#2326=STYLED_ITEM('color',(#2246),#1723);+#2327=STYLED_ITEM('color',(#2269),#1733);+#2328=STYLED_ITEM('color',(#2269),#1745);+#2329=STYLED_ITEM('color',(#2246),#1757);+#2330=STYLED_ITEM('color',(#2269),#1767);+#2331=STYLED_ITEM('color',(#2246),#1777);+#2332=STYLED_ITEM('color',(#2269),#1785);+#2333=STYLED_ITEM('color',(#2269),#1795);+#2334=STYLED_ITEM('color',(#2269),#1806);+#2335=STYLED_ITEM('color',(#2269),#1816);+#2336=STYLED_ITEM('color',(#2269),#1826);+#2337=STYLED_ITEM('color',(#2269),#1836);+#2338=STYLED_ITEM('color',(#2269),#1846);+#2339=STYLED_ITEM('color',(#2269),#1856);+#2340=STYLED_ITEM('color',(#2269),#1865);+#2341=STYLED_ITEM('color',(#2269),#1875);+#2342=STYLED_ITEM('color',(#2269),#1885);+#2343=STYLED_ITEM('color',(#2269),#1895);+#2344=STYLED_ITEM('color',(#2269),#1905);+#2345=STYLED_ITEM('color',(#2269),#1915);+#2346=STYLED_ITEM('color',(#2269),#1925);+#2347=STYLED_ITEM('color',(#2269),#1935);+#2348=STYLED_ITEM('color',(#2269),#1943);+#2349=STYLED_ITEM('color',(#2269),#1953);+#2350=STYLED_ITEM('color',(#2269),#1963);+#2351=STYLED_ITEM('color',(#2269),#1973);+#2352=STYLED_ITEM('color',(#2269),#1983);+#2353=STYLED_ITEM('color',(#2269),#1993);+#2354=STYLED_ITEM('color',(#2269),#2003);+#2355=STYLED_ITEM('color',(#2269),#2011);+#2356=STYLED_ITEM('color',(#2269),#2022);+#2357=STYLED_ITEM('color',(#2269),#2031);+#2358=STYLED_ITEM('color',(#2269),#2041);+#2359=STYLED_ITEM('color',(#2269),#2051);+#2360=STYLED_ITEM('color',(#2269),#2061);+#2361=STYLED_ITEM('color',(#2269),#2071);+#2362=STYLED_ITEM('color',(#2269),#2080);+#2363=STYLED_ITEM('color',(#2269),#2090);+#2364=STYLED_ITEM('color',(#2269),#2100);+#2365=STYLED_ITEM('color',(#2269),#2109);+#2366=STYLED_ITEM('color',(#2269),#2119);+#2367=STYLED_ITEM('color',(#2269),#2129);+#2368=STYLED_ITEM('color',(#2269),#2139);+#2369=STYLED_ITEM('color',(#2269),#2149);+#2370=STYLED_ITEM('color',(#2269),#2157);+#2371=STYLED_ITEM('color',(#2269),#2167);+#2372=STYLED_ITEM('color',(#2269),#2177);+#2373=STYLED_ITEM('color',(#2269),#2186);+#2374=STYLED_ITEM('color',(#2269),#2196);+#2375=STYLED_ITEM('color',(#2269),#2206);+#2376=STYLED_ITEM('color',(#2269),#2216);+#2377=STYLED_ITEM('color',(#2269),#2226);+#2378=STYLED_ITEM('color',(#2379),#2234);+#2379=PRESENTATION_STYLE_ASSIGNMENT((#2380,#2386));+#2380=SURFACE_STYLE_USAGE(.BOTH.,#2381);+#2381=SURFACE_SIDE_STYLE('',(#2382));+#2382=SURFACE_STYLE_FILL_AREA(#2383);+#2383=FILL_AREA_STYLE('',(#2384));+#2384=FILL_AREA_STYLE_COLOUR('',#2385);+#2385=COLOUR_RGB('',0.690999998585,0.664000007176,0.597999987832);+#2386=CURVE_STYLE('',#2254,POSITIVE_LENGTH_MEASURE(0.1),#2385);+ENDSEC;+END-ISO-10303-21;
viewers/footprint.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ps9124-f3-ax</title>
viewers/symbol.htmladded+1@@ -0,0 +1 @@+<!doctype html><title>ps9124-f3-ax</title>