← Commit history
pm8851d: restore the component block (pinout + model declarations) from this page's own README and symbol
1 file changed
+62−1
page.json+62−1@@ -33,5 +33,66 @@ "author": { "name": "Ray", "email": "[email protected]"+ },+ "component": {+ "mpn": "PM8851D",+ "manufacturer": "STMicroelectronics",+ "package": "SOT-23-6",+ "pin_count": 6,+ "category": "Isolators - Gate Drivers",+ "parts": {+ "symbol": "pm8851d.kicad_sym",+ "footprint": "pm8851d.kicad_mod",+ "model_3d": "pm8851d-etched.glb",+ "model_3d_plain": "pm8851d.glb",+ "model_3d_step": "pm8851d-etched.step",+ "model_3d_step_plain": "pm8851d.step",+ "lbr": "pm8851d.lbr"+ },+ "pins": [+ {+ "number": "1",+ "name": "VCC",+ "type": "power_in",+ "description": "IC power supply. A voltage between 10 V and 18 V is applied between this pin and GND. Bypass with a 100 nF ceramic capacitor placed close to the pin to absorb gate-charge current spikes."+ },+ {+ "number": "2",+ "name": "GND",+ "type": "power_in",+ "description": "Reference voltage / ground connection for the device."+ },+ {+ "number": "3",+ "name": "IN",+ "type": "input",+ "description": "Digital input signal for the driver. Internally pulled down to GND with a 100 kΩ (typ.) resistor. Input high/low thresholds are set as a percentage (36-58% VIH, 25-46% VIL) of the voltage on IN_TH."+ },+ {+ "number": "4",+ "name": "IN_TH",+ "type": "input",+ "description": "Input threshold reference pin (operating range 2 V to 5.5 V). Voltage applied here sets the VIH and VIL thresholds for the IN pin; typically connected to the logic/MCU supply rail. IN_TH UVLO is ~1.5 V (rising edge). Filter with 10 nF to 100 nF ceramic capacitor."+ },+ {+ "number": "5",+ "name": "SNK",+ "type": "output",+ "description": "MOSFET gate-drive sinking output controlled by IN. Sinks up to 1 A (typ., VSNK = VCC/2) to pull the external MOSFET gate to GND. Includes a 100 kΩ (typ.) internal pull-down resistor. When IN is low, SNK pulls to GND; when IN is high, SNK is Hi-Z."+ },+ {+ "number": "6",+ "name": "SRC",+ "type": "output",+ "description": "MOSFET gate-drive sourcing output controlled by IN. Sources up to 0.8 A (940 mA typ., VSRC = VCC/2) from VCC to charge the external MOSFET gate. Includes a 100 kΩ (typ.) internal pull-down resistor. When IN is high, SRC drives to VCC; when IN is low, SRC is Hi-Z."+ }+ ],+ "provenance": {+ "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ } }-}+}