← Commit history

Initial commit: component/pl2303gc

Ray ·f74ffc007c ·
2 files changed +325
README.mdadded+64
@@ -0,0 +1,64 @@+# PL2303GC++**Prolific Tech** · USB Converters · SSOP-28++PL2303GC from Prolific Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | TXD | output | Serial Port Transmitted Data Output; configurable as GPIO (GPA0). |+| 2 | DTR_N | output | Serial Port Data Terminal Ready Control Output; configurable as GPIO (GPA4). |+| 3 | RTS_N | output | Serial Port Request To Send Control Output; configurable as GPIO (GPA2). |+| 4 | VDD_IO | power_in | I/O signal power supply input, 1.8V to 5.0V; voltage must not exceed VIN. |+| 5 | RXD | input | Serial Port Received Data Input; configurable as GPIO (GPA1). |+| 6 | RI_N | input | Serial Port Ring Indicator (Remote Wakeup) Control Input; factory default wakeup source; configurable as GPIO (GPA7). |+| 7 | NC | unconnected | No internal connection; leave floating. |+| 8 | GPB7 | output | Configurable GPIO Pin with factory default TXEN output for RS485/RS422 transceiver transmit enable control. |+| 9 | DSR_N | input | Serial Port Data Set Ready Control Input; configurable as GPIO (GPA5). |+| 10 | DCD_N | input | Serial Port Data Carrier Detect Control Input; configurable as GPIO (GPA6). |+| 11 | CTS_N | input | Serial Port Clear To Send Control Input; configurable as GPIO (GPA3). |+| 12 | SUSP_N | output | Active low Shutdown control pin for powering down external RS232 transceiver; also GPIO GPB6 configurable. |+| 13 | GPB3 | bidirectional | Configurable GPIO Pin; supports USB_CFG output or I2C SCL interface functions. |+| 14 | GPB2 | bidirectional | Configurable GPIO Pin; supports VBUS_DET input or I2C SDA interface functions. |+| 15 | DP | bidirectional | USB Port Data Plus (D+) Signal with integrated termination resistors and open-drain configuration. |+| 16 | DM | bidirectional | USB Port Data Minus (D-) Signal with integrated termination resistors and open-drain configuration. |+| 17 | VO_33 | power_out | +3.3V output from integrated 5V-to-3.3V LDO regulator; can supply up to 100mA to internal and external components. |+| 18 | GND | power_in | Ground. |+| 19 | RESET_N | input | Active low asynchronous reset input with internal pull-high resistor; can be pulled to VIN or VDD_IO. |+| 20 | VIN | power_in | USB VBUS power supply input, 2.8V to 5.5V operating range; use VBUS_DET GPIO for self-powered designs. |+| 21 | NC | unconnected | No internal connection; leave floating. |+| 22 | GPB0 | bidirectional | Configurable GPIO Pin; supports TX_LED or CLK_OUT output functions. |+| 23 | GPB1 | bidirectional | Configurable GPIO Pin; supports RX_LED or TRX_LED output functions. |+| 24 | GPB4 | bidirectional | Configurable GPIO Pin; supports CLK_OUT or BC_SUSP_N output functions. |+| 25 | GPB5 | bidirectional | Configurable GPIO Pin; supports BC_DET battery charge detection output function. |+| 26 | NC | unconnected | No internal connection; leave floating. |+| 27 | XI | input | Optional 12MHz crystal oscillator input; if not used, leave floating. |+| 28 | XO | output | Optional 12MHz crystal oscillator output; if not used, leave floating. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Prolific Tech |+| Package | SSOP-28 |+| Category | Interface |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `PL2303GC`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28 (KiCad packages3D, STEP)+- 3D model files: `pl2303gc-etched.step` / `pl2303gc-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pl2303gc.step` / `pl2303gc.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Prolific Tech datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906428809035776) (49 pp, sha256 `b652483a6d683954`, retrieved 2026-09-22, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pl2303gc-datasheet.pdf)
page.jsonadded+261
@@ -0,0 +1,261 @@+{+  "slug": "pl2303gc",+  "version": "0.1.0",+  "type": "component",+  "description": "Prolific Tech USB Converters, SSOP-28. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "pl2303gc",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pl2303gc.kicad_sym",+    "pl2303gc.kicad_mod",+    "pl2303gc.glb",+    "pl2303gc.step",+    "pl2303gc.lbr",+    "docs/hero.png",+    "docs/pl2303gc-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "PL2303GC",+    "manufacturer": "Prolific Tech",+    "package": "SSOP-28",+    "pin_count": 28,+    "category": "Interface",+    "subcategory": "USB Converters",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906428809035776",+    "parts": {+      "symbol": "pl2303gc.kicad_sym",+      "footprint": "pl2303gc.kicad_mod",+      "model_3d": "pl2303gc-etched.glb",+      "model_3d_plain": "pl2303gc.glb",+      "model_3d_step": "pl2303gc-etched.step",+      "model_3d_step_plain": "pl2303gc.step",+      "lbr": "pl2303gc.lbr"+    },+    "distributor_links": {+      "lcsc": "C18184847"+    },+    "pins": [+      {+        "number": "1",+        "name": "TXD",+        "type": "output",+        "description": "Serial Port Transmitted Data Output; configurable as GPIO (GPA0)."+      },+      {+        "number": "2",+        "name": "DTR_N",+        "type": "output",+        "description": "Serial Port Data Terminal Ready Control Output; configurable as GPIO (GPA4)."+      },+      {+        "number": "3",+        "name": "RTS_N",+        "type": "output",+        "description": "Serial Port Request To Send Control Output; configurable as GPIO (GPA2)."+      },+      {+        "number": "4",+        "name": "VDD_IO",+        "type": "power_in",+        "description": "I/O signal power supply input, 1.8V to 5.0V; voltage must not exceed VIN."+      },+      {+        "number": "5",+        "name": "RXD",+        "type": "input",+        "description": "Serial Port Received Data Input; configurable as GPIO (GPA1)."+      },+      {+        "number": "6",+        "name": "RI_N",+        "type": "input",+        "description": "Serial Port Ring Indicator (Remote Wakeup) Control Input; factory default wakeup source; configurable as GPIO (GPA7)."+      },+      {+        "number": "7",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; leave floating."+      },+      {+        "number": "8",+        "name": "GPB7",+        "type": "output",+        "description": "Configurable GPIO Pin with factory default TXEN output for RS485/RS422 transceiver transmit enable control."+      },+      {+        "number": "9",+        "name": "DSR_N",+        "type": "input",+        "description": "Serial Port Data Set Ready Control Input; configurable as GPIO (GPA5)."+      },+      {+        "number": "10",+        "name": "DCD_N",+        "type": "input",+        "description": "Serial Port Data Carrier Detect Control Input; configurable as GPIO (GPA6)."+      },+      {+        "number": "11",+        "name": "CTS_N",+        "type": "input",+        "description": "Serial Port Clear To Send Control Input; configurable as GPIO (GPA3)."+      },+      {+        "number": "12",+        "name": "SUSP_N",+        "type": "output",+        "description": "Active low Shutdown control pin for powering down external RS232 transceiver; also GPIO GPB6 configurable."+      },+      {+        "number": "13",+        "name": "GPB3",+        "type": "bidirectional",+        "description": "Configurable GPIO Pin; supports USB_CFG output or I2C SCL interface functions."+      },+      {+        "number": "14",+        "name": "GPB2",+        "type": "bidirectional",+        "description": "Configurable GPIO Pin; supports VBUS_DET input or I2C SDA interface functions."+      },+      {+        "number": "15",+        "name": "DP",+        "type": "bidirectional",+        "description": "USB Port Data Plus (D+) Signal with integrated termination resistors and open-drain configuration."+      },+      {+        "number": "16",+        "name": "DM",+        "type": "bidirectional",+        "description": "USB Port Data Minus (D-) Signal with integrated termination resistors and open-drain configuration."+      },+      {+        "number": "17",+        "name": "VO_33",+        "type": "power_out",+        "description": "+3.3V output from integrated 5V-to-3.3V LDO regulator; can supply up to 100mA to internal and external components."+      },+      {+        "number": "18",+        "name": "GND",+        "type": "power_in",+        "description": "Ground."+      },+      {+        "number": "19",+        "name": "RESET_N",+        "type": "input",+        "description": "Active low asynchronous reset input with internal pull-high resistor; can be pulled to VIN or VDD_IO."+      },+      {+        "number": "20",+        "name": "VIN",+        "type": "power_in",+        "description": "USB VBUS power supply input, 2.8V to 5.5V operating range; use VBUS_DET GPIO for self-powered designs."+      },+      {+        "number": "21",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; leave floating."+      },+      {+        "number": "22",+        "name": "GPB0",+        "type": "bidirectional",+        "description": "Configurable GPIO Pin; supports TX_LED or CLK_OUT output functions."+      },+      {+        "number": "23",+        "name": "GPB1",+        "type": "bidirectional",+        "description": "Configurable GPIO Pin; supports RX_LED or TRX_LED output functions."+      },+      {+        "number": "24",+        "name": "GPB4",+        "type": "bidirectional",+        "description": "Configurable GPIO Pin; supports CLK_OUT or BC_SUSP_N output functions."+      },+      {+        "number": "25",+        "name": "GPB5",+        "type": "bidirectional",+        "description": "Configurable GPIO Pin; supports BC_DET battery charge detection output function."+      },+      {+        "number": "26",+        "name": "NC",+        "type": "unconnected",+        "description": "No internal connection; leave floating."+      },+      {+        "number": "27",+        "name": "XI",+        "type": "input",+        "description": "Optional 12MHz crystal oscillator input; if not used, leave floating."+      },+      {+        "number": "28",+        "name": "XO",+        "type": "output",+        "description": "Optional 12MHz crystal oscillator output; if not used, leave floating."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 49,+        "cost_usd": 0.538,+        "at": "2026-09-22T01:25:53"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906428809035776",+        "pages": 49,+        "sha256": "b652483a6d683954",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file