← Commit history

pj73al30sq: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·b62e064803 · ·parent c7e2492
1 file changed +44−1
page.json+44−1
@@ -33,5 +33,48 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "PJ73AL30SQ",+    "manufacturer": "PJSEMI",+    "package": "SOT-89",+    "pin_count": 3,+    "category": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",+    "parts": {+      "symbol": "pj73al30sq.kicad_sym",+      "footprint": "pj73al30sq.kicad_mod",+      "model_3d": "pj73al30sq-etched.glb",+      "model_3d_plain": "pj73al30sq.glb",+      "model_3d_step": "pj73al30sq-etched.step",+      "model_3d_step_plain": "pj73al30sq.step",+      "lbr": "pj73al30sq.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "GND",+        "type": "power_in",+        "description": "Ground / common return for the regulator. Tie to the single-point ground of the input and output bypass capacitors (10μF typical on each rail per the application circuit)."+      },+      {+        "number": "2",+        "name": "VIN",+        "type": "power_in",+        "description": "Unregulated supply input, 0 to +20V operating (absolute max +22V). Requires a 10μF bypass capacitor to GND close to the pin; VIN should be at least VOUT + ~0.3V (typ 210mV dropout at 100mA for the 3.0V option) for regulation."+      },+      {+        "number": "3",+        "name": "VOUT",+        "type": "power_out",+        "description": "Regulated 3.0V output (2.94V min / 3.06V max at IOUT=10mA), up to 300mA continuous, short-circuit current ~400mA. Requires a 10μF bypass capacitor to GND close to the pin for stability."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}