← Commit history

pj4055a20sg: restore the component block (pinout + model declarations) from this page's own README and symbol

Ray ·053fb6049d · ·parent 866bff7
1 file changed +62−1
page.json+62−1
@@ -33,5 +33,66 @@   "author": {     "name": "Ray",     "email": "[email protected]"+  },+  "component": {+    "mpn": "PJ4055A20SG",+    "manufacturer": "PJSEMI",+    "package": "SOT-23-6",+    "pin_count": 6,+    "category": "Battery Management",+    "parts": {+      "symbol": "pj4055a20sg.kicad_sym",+      "footprint": "pj4055a20sg.kicad_mod",+      "model_3d": "pj4055a20sg-etched.glb",+      "model_3d_plain": "pj4055a20sg.glb",+      "model_3d_step": "pj4055a20sg-etched.step",+      "model_3d_step_plain": "pj4055a20sg.step",+      "lbr": "pj4055a20sg.lbr"+    },+    "pins": [+      {+        "number": "1",+        "name": "CHRG",+        "type": "output",+        "description": "Open-drain charge status output. Strong pull-down (bright) when a charge cycle is in progress; high-impedance when charge complete. Flashes if no battery is present. Weak pull-down current ICHRG ≈ 3 mA. Typically drives an LED with a 1 kΩ series resistor to VCC."+      },+      {+        "number": "2",+        "name": "GND",+        "type": "power_in",+        "description": "Ground pin. Also serves as the primary thermal path from the die/lead-frame to the PC board copper heatsink for thermal regulation."+      },+      {+        "number": "3",+        "name": "BAT",+        "type": "power_out",+        "description": "Charging current output to the Li-Ion battery. Regulated float voltage 4.20V (A20 variant, ±0.6%). Delivers up to 600 mA (programmed via PROG). Recharge threshold ~4.1V; trickle-charge threshold 2.9V. Absolute maximum -4.5 to +5.5 V. Requires a 1 µF decoupling capacitor to GND."+      },+      {+        "number": "4",+        "name": "VCC",+        "type": "power_in",+        "description": "Positive input supply voltage. Operating range 4.5 V to 6.2 V (typ. 5 V, USB-compatible); 6.2 V input OVP; absolute maximum 12 V. Input supply current ICC ≈ 150 µA. Requires a 1 µF decoupling capacitor to GND."+      },+      {+        "number": "5",+        "name": "STANDBY",+        "type": "output",+        "description": "Open-drain charge-complete status output. High-impedance during charging; changes to strong pull-down state once the charge cycle terminates (battery full). Typically drives an LED with a 1 kΩ series resistor to VCC."+      },+      {+        "number": "6",+        "name": "PROG",+        "type": "bidirectional",+        "description": "Charge-current program, charge-current monitor, and shutdown pin. Connect a resistor RPROG from PROG to GND; charge current IBAT = (VPROG/RPROG)×1000, where VPROG ≈ 1.0 V. Example: RPROG = 2 kΩ → 500 mA; RPROG = 10 kΩ → 100 mA. Charge terminates when VPROG falls below 100 mV (C/10). Absolute max VPROG -0.3 to 8.5 V. Floating/open the pin to shut down."+      }+    ],+    "provenance": {+      "rebuilt": "component block rebuilt 2026-10-05 from this page's own README pinout table and .kicad_sym (pins cross-checked), no re-extraction"+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }   }-}\ No newline at end of file+}